Drop the I2C in one comment, for these registers are also used in SPI driver; Move the macro definition of TASDEVICE_CMD_XXX from tas2781.h to tas2781_fmwlib.c, because the macros are only referenced in only fwlib.

Signed-off-by: Shenghao Ding shenghao-ding@ti.com

--- v1: - Correct the comment in tas2781.h. - Move the definition of TASDEVICE_CMD_XXX from tas2781.h to tas2781_fmwlib.c --- include/sound/tas2781.h | 7 +------ sound/soc/codecs/tas2781-fmwlib.c | 5 +++++ 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/include/sound/tas2781.h b/include/sound/tas2781.h index 442126aa124a..9dc178a7486a 100644 --- a/include/sound/tas2781.h +++ b/include/sound/tas2781.h @@ -49,7 +49,7 @@ #define TASDEVICE_REG_SWRESET TASDEVICE_REG(0x0, 0x0, 0x01) #define TASDEVICE_REG_SWRESET_RESET BIT(0)

-/* I2C Checksum */ +/* Checksum */ #define TASDEVICE_CHECKSUM_REG TASDEVICE_REG(0x0, 0x0, 0x7e)

/* XM_340 */ @@ -105,11 +105,6 @@ #define TAS2781_RUNTIME_RE_REG_TF TASDEVICE_REG(0x64, 0x62, 0x48) #define TAS2781_RUNTIME_RE_REG TASDEVICE_REG(0x64, 0x63, 0x44)

-#define TASDEVICE_CMD_SING_W 0x1 -#define TASDEVICE_CMD_BURST 0x2 -#define TASDEVICE_CMD_DELAY 0x3 -#define TASDEVICE_CMD_FIELD_W 0x4 - enum audio_device { TAS2563, TAS2781, diff --git a/sound/soc/codecs/tas2781-fmwlib.c b/sound/soc/codecs/tas2781-fmwlib.c index 28adfc5526bd..c9c1e608ddb7 100644 --- a/sound/soc/codecs/tas2781-fmwlib.c +++ b/sound/soc/codecs/tas2781-fmwlib.c @@ -50,6 +50,11 @@ #define TAS2781_YRAM5_START_REG TAS2781_YRAM3_START_REG #define TAS2781_YRAM5_END_REG TAS2781_YRAM3_END_REG

+#define TASDEVICE_CMD_SING_W 0x1 +#define TASDEVICE_CMD_BURST 0x2 +#define TASDEVICE_CMD_DELAY 0x3 +#define TASDEVICE_CMD_FIELD_W 0x4 + #define TASDEVICE_MAXPROGRAM_NUM_KERNEL 5 #define TASDEVICE_MAXCONFIG_NUM_KERNEL_MULTIPLE_AMPS 64 #define TASDEVICE_MAXCONFIG_NUM_KERNEL 10