Use newly implemented DMA channel self linking on OMAP1510 like on other OMAP models. Remove unnecessary DMA transfer restart from interrupt handler routine.

The interrupt routine used to maintain a period index, originally needed for counting up periods up to a full buffer in order to restart the DMA transfer. For some time, this counter is also used as a replacement for hardware DMA progress counter that has been found unusable on OMAP1510 in case of playback. Thus, the period index calculation cannot be omitted completely. However, the accuracy of this counter can still suffer from missing DMA interrupts.

In order to work correctly, it requires patch 1 from this series also applied: [RFC][PATCH 1/3] ARM: OMAP: DMA: Add support for DMA channel self linking on OMAP1510

Created against linux-2.6.31-rc5.

Tested on Amstrad Delta.

Signed-off-by: Janusz Krzysztofik jkrzyszt@tis.icnet.pl

--- --- linux-2.6.31-rc5/sound/soc/omap/omap-pcm.c.orig 2009-08-07 13:38:23.000000000 +0200 +++ linux-2.6.31-rc5/sound/soc/omap/omap-pcm.c 2009-08-10 08:31:08.000000000 +0200 @@ -59,16 +59,18 @@ static void omap_pcm_dma_irq(int ch, u16 struct omap_runtime_data *prtd = runtime->private_data; unsigned long flags;

- if (cpu_is_omap1510()) { + if ((cpu_is_omap1510()) && + (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)) { /* - * OMAP1510 doesn't support DMA chaining so have to restart - * the transfer after all periods are transferred + * OMAP1510 doesn't fully support DMA progress counter + * and there is no software emulation implemented yet, + * so have to maintain our own playback progress counter + * that can be used by omap_pcm_pointer() instead. */ spin_lock_irqsave(&prtd->lock, flags); if (prtd->period_index >= 0) { if (++prtd->period_index == runtime->periods) { prtd->period_index = 0; - omap_start_dma(prtd->dma_ch); } } spin_unlock_irqrestore(&prtd->lock, flags); @@ -100,7 +102,7 @@ static int omap_pcm_hw_params(struct snd prtd->dma_data = dma_data; err = omap_request_dma(dma_data->dma_req, dma_data->name, omap_pcm_dma_irq, substream, &prtd->dma_ch); - if (!err && !cpu_is_omap1510()) { + if (!err) { /* * Link channel with itself so DMA doesn't need any * reprogramming while looping the buffer @@ -119,8 +121,7 @@ static int omap_pcm_hw_free(struct snd_p if (prtd->dma_data == NULL) return 0;

- if (!cpu_is_omap1510()) - omap_dma_unlink_lch(prtd->dma_ch, prtd->dma_ch); + omap_dma_unlink_lch(prtd->dma_ch, prtd->dma_ch); omap_free_dma(prtd->dma_ch); prtd->dma_data = NULL;