[alsa-devel] [PATCH v2 0/2] ASoC: tlv320dac33: FIFO mode updates
Hello,
Changes since v1: - mode1_i2c_latecy renamed to mode1_latency
Intro mail from the first series:
The main feature of this series is the automatic FIFO configuration of the FIFO, when one of the FIFO mode is selected. The first patch simplifies the handling of the Mode1 in manual mode, and also removes the hardwired latency definition from the code, so it can be adjusted based on the underlying platform.
The second patch adds option to select the automatic FIFO configuration. When this mode is selected the driver will configure the FIFO to match the stream's period size with the burst length (in terms of samples bursted out from the host). In Mode1 this is trivial, since I can configure the nSample to match with the period size. However the Mode7 is a bit more complicated. The formula (UTHR_FROM_PERIOD_SIZE) calculates the UTHR configuration for the given number of samples.
The patches are generated against: git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git:topic/asoc
--- Peter Ujfalusi (2): ASoC: tlv320dac33: Revisit the FIFO Mode1 handling ASoC: tlv320dac33: Add support for automatic FIFO configuration
include/sound/tlv320dac33-plat.h | 2 + sound/soc/codecs/tlv320dac33.c | 125 ++++++++++++++++++++++++-------------- 2 files changed, 82 insertions(+), 45 deletions(-)
-- 1.7.2
Replace the hardwired latency definition with platform data parameter, and simplify the nSample parameter calculation.
Signed-off-by: Peter Ujfalusi peter.ujfalusi@nokia.com --- include/sound/tlv320dac33-plat.h | 1 + sound/soc/codecs/tlv320dac33.c | 71 ++++++++++++++++++-------------------- 2 files changed, 35 insertions(+), 37 deletions(-)
diff --git a/include/sound/tlv320dac33-plat.h b/include/sound/tlv320dac33-plat.h index 3f428d5..1aa7bdb 100644 --- a/include/sound/tlv320dac33-plat.h +++ b/include/sound/tlv320dac33-plat.h @@ -15,6 +15,7 @@
struct tlv320dac33_platform_data { int power_gpio; + int mode1_latency; /* latency caused by the i2c writes in us */ int keep_bclk; /* Keep the BCLK running in FIFO modes */ u8 burst_bclkdiv; }; diff --git a/sound/soc/codecs/tlv320dac33.c b/sound/soc/codecs/tlv320dac33.c index 2fa946c..ced6fbb 100644 --- a/sound/soc/codecs/tlv320dac33.c +++ b/sound/soc/codecs/tlv320dac33.c @@ -49,8 +49,6 @@
#define NSAMPLE_MAX 5700
-#define LATENCY_TIME_MS 20 - #define MODE7_LTHR 10 #define MODE7_UTHR (DAC33_BUFFER_SIZE_SAMPLES - 10)
@@ -107,6 +105,8 @@ struct tlv320dac33_priv { * this */ enum dac33_fifo_modes fifo_mode;/* FIFO mode selection */ unsigned int nsample; /* burst read amount from host */ + int mode1_latency; /* latency caused by the i2c writes in + * us */ u8 burst_bclkdiv; /* BCLK divider value in burst mode */ unsigned int burst_rate; /* Interface speed in Burst modes */
@@ -649,7 +649,7 @@ static inline void dac33_prefill_handler(struct tlv320dac33_priv *dac33) switch (dac33->fifo_mode) { case DAC33_FIFO_MODE1: dac33_write16(codec, DAC33_NSAMPLE_MSB, - DAC33_THRREG(dac33->nsample + dac33->alarm_threshold)); + DAC33_THRREG(dac33->nsample));
/* Take the timestamps */ spin_lock_irq(&dac33->lock); @@ -798,6 +798,10 @@ static void dac33_shutdown(struct snd_pcm_substream *substream, struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
dac33->substream = NULL; + + /* Reset the nSample restrictions */ + dac33->nsample_min = 0; + dac33->nsample_max = NSAMPLE_MAX; }
static int dac33_hw_params(struct snd_pcm_substream *substream, @@ -1040,48 +1044,38 @@ static void dac33_calculate_times(struct snd_pcm_substream *substream) struct snd_soc_device *socdev = rtd->socdev; struct snd_soc_codec *codec = socdev->card->codec; struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec); + unsigned int period_size = substream->runtime->period_size; + unsigned int rate = substream->runtime->rate; unsigned int nsample_limit;
/* In bypass mode we don't need to calculate */ if (!dac33->fifo_mode) return;
- /* Number of samples (16bit, stereo) in one period */ - dac33->nsample_min = snd_pcm_lib_period_bytes(substream) / 4; - - /* Number of samples (16bit, stereo) in ALSA buffer */ - dac33->nsample_max = snd_pcm_lib_buffer_bytes(substream) / 4; - /* Subtract one period from the total */ - dac33->nsample_max -= dac33->nsample_min; - - /* Number of samples for LATENCY_TIME_MS / 2 */ - dac33->alarm_threshold = substream->runtime->rate / - (1000 / (LATENCY_TIME_MS / 2)); - - /* Find and fix up the lowest nsmaple limit */ - nsample_limit = substream->runtime->rate / (1000 / LATENCY_TIME_MS); - - if (dac33->nsample_min < nsample_limit) - dac33->nsample_min = nsample_limit; - - if (dac33->nsample < dac33->nsample_min) - dac33->nsample = dac33->nsample_min; - - /* - * Find and fix up the highest nsmaple limit - * In order to not overflow the DAC33 buffer substract the - * alarm_threshold value from the size of the DAC33 buffer - */ - nsample_limit = DAC33_BUFFER_SIZE_SAMPLES - dac33->alarm_threshold; - - if (dac33->nsample_max > nsample_limit) - dac33->nsample_max = nsample_limit; - - if (dac33->nsample > dac33->nsample_max) - dac33->nsample = dac33->nsample_max; - switch (dac33->fifo_mode) { case DAC33_FIFO_MODE1: + /* Number of samples under i2c latency */ + dac33->alarm_threshold = US_TO_SAMPLES(rate, + dac33->mode1_latency); + /* nSample time shall not be shorter than i2c latency */ + dac33->nsample_min = dac33->alarm_threshold; + /* + * nSample should not be bigger than alsa buffer minus + * size of one period to avoid overruns + */ + dac33->nsample_max = substream->runtime->buffer_size - + period_size; + nsample_limit = DAC33_BUFFER_SIZE_SAMPLES - + dac33->alarm_threshold; + if (dac33->nsample_max > nsample_limit) + dac33->nsample_max = nsample_limit; + + /* Correct the nSample if it is outside of the ranges */ + if (dac33->nsample < dac33->nsample_min) + dac33->nsample = dac33->nsample_min; + if (dac33->nsample > dac33->nsample_max) + dac33->nsample = dac33->nsample_max; + dac33->mode1_us_burst = SAMPLES_TO_US(dac33->burst_rate, dac33->nsample); dac33->t_stamp1 = 0; @@ -1519,6 +1513,9 @@ static int __devinit dac33_i2c_probe(struct i2c_client *client, /* Pre calculate the burst rate */ dac33->burst_rate = BURST_BASEFREQ_HZ / dac33->burst_bclkdiv / 32; dac33->keep_bclk = pdata->keep_bclk; + dac33->mode1_latency = pdata->mode1_latency; + if (!dac33->mode1_latency) + dac33->mode1_latency = 10000; /* 10ms */ dac33->irq = client->irq; dac33->nsample = NSAMPLE_MAX; dac33->nsample_max = NSAMPLE_MAX;
Platform parameter to enable automatic FIFO configuration when the codec is in Mode1 or Mode7 FIFO mode. When this mode is selected, the controls for changing nSample (in Mode1), and UTHR (in Mode7) are not added. The driver configures the FIFO configuration based on the stream's period size in a way, that every burst will read period size of data from the host. In Mode7 we need to use a formula, which gives close enough aproximation for the burst length from the host point of view.
Signed-off-by: Peter Ujfalusi peter.ujfalusi@nokia.com --- include/sound/tlv320dac33-plat.h | 1 + sound/soc/codecs/tlv320dac33.c | 90 +++++++++++++++++++++++++++----------- 2 files changed, 65 insertions(+), 26 deletions(-)
diff --git a/include/sound/tlv320dac33-plat.h b/include/sound/tlv320dac33-plat.h index 1aa7bdb..6c66496 100644 --- a/include/sound/tlv320dac33-plat.h +++ b/include/sound/tlv320dac33-plat.h @@ -16,6 +16,7 @@ struct tlv320dac33_platform_data { int power_gpio; int mode1_latency; /* latency caused by the i2c writes in us */ + int auto_fifo_config; /* FIFO config based on the period size */ int keep_bclk; /* Keep the BCLK running in FIFO modes */ u8 burst_bclkdiv; }; diff --git a/sound/soc/codecs/tlv320dac33.c b/sound/soc/codecs/tlv320dac33.c index ced6fbb..8651b01 100644 --- a/sound/soc/codecs/tlv320dac33.c +++ b/sound/soc/codecs/tlv320dac33.c @@ -60,6 +60,9 @@ #define US_TO_SAMPLES(rate, us) \ (rate / (1000000 / us))
+#define UTHR_FROM_PERIOD_SIZE(samples, playrate, burstrate) \ + ((samples * 5000) / ((burstrate * 5000) / (burstrate - playrate))) + static void dac33_calculate_times(struct snd_pcm_substream *substream); static int dac33_prepare_chip(struct snd_pcm_substream *substream);
@@ -107,6 +110,8 @@ struct tlv320dac33_priv { unsigned int nsample; /* burst read amount from host */ int mode1_latency; /* latency caused by the i2c writes in * us */ + int auto_fifo_config; /* Configure the FIFO based on the + * period size */ u8 burst_bclkdiv; /* BCLK divider value in burst mode */ unsigned int burst_rate; /* Interface speed in Burst modes */
@@ -538,13 +543,16 @@ static const struct snd_kcontrol_new dac33_snd_controls[] = { DAC33_LINEL_TO_LLO_VOL, DAC33_LINER_TO_RLO_VOL, 0, 127, 1), };
-static const struct snd_kcontrol_new dac33_nsample_snd_controls[] = { +static const struct snd_kcontrol_new dac33_mode_snd_controls[] = { + SOC_ENUM_EXT("FIFO Mode", dac33_fifo_mode_enum, + dac33_get_fifo_mode, dac33_set_fifo_mode), +}; + +static const struct snd_kcontrol_new dac33_fifo_snd_controls[] = { SOC_SINGLE_EXT("nSample", 0, 0, 5900, 0, - dac33_get_nsample, dac33_set_nsample), + dac33_get_nsample, dac33_set_nsample), SOC_SINGLE_EXT("UTHR", 0, 0, MODE7_UTHR, 0, dac33_get_uthr, dac33_set_uthr), - SOC_ENUM_EXT("FIFO Mode", dac33_fifo_mode_enum, - dac33_get_fifo_mode, dac33_set_fifo_mode), };
/* Analog bypass */ @@ -1057,24 +1065,38 @@ static void dac33_calculate_times(struct snd_pcm_substream *substream) /* Number of samples under i2c latency */ dac33->alarm_threshold = US_TO_SAMPLES(rate, dac33->mode1_latency); - /* nSample time shall not be shorter than i2c latency */ - dac33->nsample_min = dac33->alarm_threshold; - /* - * nSample should not be bigger than alsa buffer minus - * size of one period to avoid overruns - */ - dac33->nsample_max = substream->runtime->buffer_size - - period_size; - nsample_limit = DAC33_BUFFER_SIZE_SAMPLES - - dac33->alarm_threshold; - if (dac33->nsample_max > nsample_limit) - dac33->nsample_max = nsample_limit; - - /* Correct the nSample if it is outside of the ranges */ - if (dac33->nsample < dac33->nsample_min) - dac33->nsample = dac33->nsample_min; - if (dac33->nsample > dac33->nsample_max) - dac33->nsample = dac33->nsample_max; + if (dac33->auto_fifo_config) { + if (period_size <= dac33->alarm_threshold) + /* + * Configure nSamaple to number of periods, + * which covers the latency requironment. + */ + dac33->nsample = period_size * + ((dac33->alarm_threshold / period_size) + + (dac33->alarm_threshold % period_size ? + 1 : 0)); + else + dac33->nsample = period_size; + } else { + /* nSample time shall not be shorter than i2c latency */ + dac33->nsample_min = dac33->alarm_threshold; + /* + * nSample should not be bigger than alsa buffer minus + * size of one period to avoid overruns + */ + dac33->nsample_max = substream->runtime->buffer_size - + period_size; + nsample_limit = DAC33_BUFFER_SIZE_SAMPLES - + dac33->alarm_threshold; + if (dac33->nsample_max > nsample_limit) + dac33->nsample_max = nsample_limit; + + /* Correct the nSample if it is outside of the ranges */ + if (dac33->nsample < dac33->nsample_min) + dac33->nsample = dac33->nsample_min; + if (dac33->nsample > dac33->nsample_max) + dac33->nsample = dac33->nsample_max; + }
dac33->mode1_us_burst = SAMPLES_TO_US(dac33->burst_rate, dac33->nsample); @@ -1082,6 +1104,16 @@ static void dac33_calculate_times(struct snd_pcm_substream *substream) dac33->t_stamp2 = 0; break; case DAC33_FIFO_MODE7: + if (dac33->auto_fifo_config) { + dac33->uthr = UTHR_FROM_PERIOD_SIZE( + period_size, + rate, + dac33->burst_rate) + 9; + if (dac33->uthr > MODE7_UTHR) + dac33->uthr = MODE7_UTHR; + if (dac33->uthr < (MODE7_LTHR + 10)) + dac33->uthr = (MODE7_LTHR + 10); + } dac33->mode7_us_to_lthr = SAMPLES_TO_US(substream->runtime->rate, dac33->uthr - MODE7_LTHR + 1); @@ -1379,10 +1411,15 @@ static int dac33_soc_probe(struct platform_device *pdev)
snd_soc_add_controls(codec, dac33_snd_controls, ARRAY_SIZE(dac33_snd_controls)); - /* Only add the nSample controls, if we have valid IRQ number */ - if (dac33->irq >= 0) - snd_soc_add_controls(codec, dac33_nsample_snd_controls, - ARRAY_SIZE(dac33_nsample_snd_controls)); + /* Only add the FIFO controls, if we have valid IRQ number */ + if (dac33->irq >= 0) { + snd_soc_add_controls(codec, dac33_mode_snd_controls, + ARRAY_SIZE(dac33_mode_snd_controls)); + /* FIFO usage controls only, if autoio config is not selected */ + if (!dac33->auto_fifo_config) + snd_soc_add_controls(codec, dac33_fifo_snd_controls, + ARRAY_SIZE(dac33_fifo_snd_controls)); + }
dac33_add_widgets(codec);
@@ -1513,6 +1550,7 @@ static int __devinit dac33_i2c_probe(struct i2c_client *client, /* Pre calculate the burst rate */ dac33->burst_rate = BURST_BASEFREQ_HZ / dac33->burst_bclkdiv / 32; dac33->keep_bclk = pdata->keep_bclk; + dac33->auto_fifo_config = pdata->auto_fifo_config; dac33->mode1_latency = pdata->mode1_latency; if (!dac33->mode1_latency) dac33->mode1_latency = 10000; /* 10ms */
On Wed, Jul 28, 2010 at 03:26:53PM +0300, Peter Ujfalusi wrote:
Hello,
Changes since v1:
- mode1_i2c_latecy renamed to mode1_latency
Both
Acked-by: Mark Brown broonie@opensource.wolfsonmicro.com
On Wed, 2010-07-28 at 10:34 -0700, Mark Brown wrote:
On Wed, Jul 28, 2010 at 03:26:53PM +0300, Peter Ujfalusi wrote:
Hello,
Changes since v1:
- mode1_i2c_latecy renamed to mode1_latency
Both
Acked-by: Mark Brown broonie@opensource.wolfsonmicro.com
Both now applied.
Thanks
Liam
participants (3)
-
Liam Girdwood -
Mark Brown -
Peter Ujfalusi