"Acoustic Tuning" debugfs node is a bridge to the acoustic tuning tool which can tune the chips' acoustic effect.

Signed-off-by: Shenghao Ding shenghao-ding@ti.com

--- v5: - Drop the define CONFIG_SND_SOC_TAS2781_ACOUST_I2C in Kconfig, anyone who wants to use acoustic tool have to edit the source due to the whole directly exposing the registers. v4: - Add name_prefix as part of the name of debugfs node in case of multiple devices. v3: - Remove unnessary indentation. - Add a special build CONFIG_SND_SOC_TAS2781_I2C_ACOUST for acoustic tuning debugfs node v2: - Implement the "Acoustic Tuning" as debugfs node instead of kcontrol. v1: - Add "Acoustic Tuning" kcontrol for acoustic tuning. --- include/sound/tas2781.h | 23 +++++ sound/soc/codecs/tas2781-i2c.c | 154 +++++++++++++++++++++++++++++++++ 2 files changed, 177 insertions(+)

diff --git a/include/sound/tas2781.h b/include/sound/tas2781.h index 8192a94d783a..442126aa124a 100644 --- a/include/sound/tas2781.h +++ b/include/sound/tas2781.h @@ -161,10 +161,33 @@ struct calidata { unsigned int cali_dat_sz_per_dev; };

+/* + * To enable CONFIG_SND_SOC_TAS2781_ACOUST_I2C will create a bridge to the + * acoustic tuning tool which can tune the chips' acoustic effect. Due to the + * whole directly exposing the registers, there exist some potential risks. So + * this define is invisible in Kconfig, anyone who wants to use acoustic tool + * have to edit the source manually. + */ +#ifdef CONFIG_SND_SOC_TAS2781_ACOUST_I2C +#define TASDEV_DATA_PAYLOAD_SIZE 128 +struct acoustic_data { + unsigned char len; + unsigned char id; + unsigned char addr; + unsigned char book; + unsigned char page; + unsigned char reg; + unsigned char data[TASDEV_DATA_PAYLOAD_SIZE]; +}; +#endif + struct tasdevice_priv { struct tasdevice tasdevice[TASDEVICE_MAX_CHANNELS]; struct tasdevice_rca rcabin; struct calidata cali_data; +#ifdef CONFIG_SND_SOC_TAS2781_ACOUST_I2C + struct acoustic_data acou_data; +#endif struct tasdevice_fw *fmw; struct gpio_desc *speaker_id; struct gpio_desc *reset; diff --git a/sound/soc/codecs/tas2781-i2c.c b/sound/soc/codecs/tas2781-i2c.c index 9a329c561a53..f7d71ee4f627 100644 --- a/sound/soc/codecs/tas2781-i2c.c +++ b/sound/soc/codecs/tas2781-i2c.c @@ -14,6 +14,9 @@ //

#include <linux/crc8.h> +#ifdef CONFIG_SND_SOC_TAS2781_ACOUST_I2C +#include <linux/debugfs.h> +#endif #include <linux/firmware.h> #include <linux/gpio/consumer.h> #include <linux/i2c.h> @@ -1423,10 +1426,150 @@ static int tasdevice_create_cali_ctrls(struct tasdevice_priv *priv) nctrls < i ? nctrls : i); }

+#ifdef CONFIG_SND_SOC_TAS2781_ACOUST_I2C +/* + * This debugfs node is a bridge to the acoustic tuning application + * tool which can tune the chips' acoustic effect. + * + * package structure for PPC3 communications: + * Pkg len (1 byte) + * Pkg id (1 byte, 'r' or 'w') + * Dev id (1 byte, i2c address) + * Book id (1 byte) + * Page id (1 byte) + * Reg id (1 byte) + * switch (pkg id) { + * case 'w': + * 1 byte, length of data to read + * case 'r': + * data payload (1~128 bytes) + * } + */ +static ssize_t acoustic_ctl_read(struct file *file, char __user *to, + size_t count, loff_t *ppos) +{ + struct snd_soc_component *comp = file->private_data; + struct tasdevice_priv *tas_priv = snd_soc_component_get_drvdata(comp); + struct acoustic_data *p = &tas_priv->acou_data; + int ret = -1; + + if (p->id == 'r' && p->len == count && count <= sizeof(*p)) + ret = simple_read_from_buffer(to, count, ppos, p, p->len); + else + dev_err(tas_priv->dev, "Not ready for get.\n"); + return ret; +} + +static ssize_t acoustic_ctl_write(struct file *file, + const char __user *from, size_t count, loff_t *ppos) +{ + struct snd_soc_component *comp = file->private_data; + struct tasdevice_priv *priv = snd_soc_component_get_drvdata(comp); + struct acoustic_data *p = &priv->acou_data; + unsigned int max_pkg_len = sizeof(*p); + unsigned char *src; + int j, len, reg, val; + unsigned short chn; + int ret = -1; + + if (count > sizeof(*p)) { + dev_err(priv->dev, "count(%u) is larger than max(%u).\n", + (unsigned int)count, max_pkg_len); + return ret; + } + + src = memdup_user(from, count); + if (IS_ERR(src)) + return PTR_ERR(src); + + if (src[0] > max_pkg_len && src[0] != count) { + dev_err(priv->dev, "pkg(%u), max(%u), count(%u) dismatch.\n", + src[0], max_pkg_len, (unsigned int)count); + ret = 0; + goto exit; + } + + switch (src[1]) { + case 'r': + /* length of data to read */ + len = src[6]; + break; + case 'w': + /* Skip 6 bytes for package type and register address */ + len = src[0] - 6; + break; + default: + dev_err(priv->dev, "%s Wrong code %02x.\n", __func__, src[1]); + ret = 0; + goto exit; + } + + if (len < 1) { + dev_err(priv->dev, "pkg fmt invalid %02x.\n", len); + ret = 0; + goto exit; + } + + for (j = 0; j < priv->ndev; j++) + if (src[2] == priv->tasdevice[j].dev_addr) { + chn = j; + break; + } + if (j >= priv->ndev) { + dev_err(priv->dev, "no such device 0x%02x.\n", src[2]); + ret = 0; + goto exit; + } + + reg = TASDEVICE_REG(src[3], src[4], src[5]); + + guard(mutex)(&priv->codec_lock); + + if (src[1] == 'w') { + if (len > 1) + ret = tasdevice_dev_bulk_write(priv, chn, reg, + &src[6], len); + else + ret = tasdevice_dev_write(priv, chn, reg, src[6]); + } else { + struct acoustic_data *p = &priv->acou_data; + + memcpy(p, src, 6); + if (len > 1) { + ret = tasdevice_dev_bulk_read(priv, chn, reg, + p->data, len); + } else { + ret = tasdevice_dev_read(priv, chn, reg, &val); + p->data[0] = val; + } + p->len = len + 6; + } + + if (ret) + dev_err(priv->dev, "i2c communication error.\n"); + else + ret = count; +exit: + kfree(src); + return ret; +} + +static const struct file_operations acoustic_ctl_fops = { + .open = simple_open, + .read = acoustic_ctl_read, + .write = acoustic_ctl_write, +}; +#endif + static void tasdevice_fw_ready(const struct firmware *fmw, void *context) { struct tasdevice_priv *tas_priv = context; +#ifdef CONFIG_SND_SOC_TAS2781_ACOUST_I2C + struct snd_soc_component *comp = tas_priv->codec; + struct dentry *debugfs_root = comp->debugfs_root; + char *acoustic_debugfs_node; +#endif int ret = 0; int i;

@@ -1500,6 +1643,17 @@ static void tasdevice_fw_ready(const struct firmware *fmw,

tasdevice_prmg_load(tas_priv, 0); tas_priv->cur_prog = 0; + +#ifdef CONFIG_SND_SOC_TAS2781_ACOUST_I2C + if (tas_priv->name_prefix) + acoustic_debugfs_node = devm_kasprintf(tas_priv->dev, + GFP_KERNEL, "%s_acoustic_ctl", tas_priv->name_prefix); + else + acoustic_debugfs_node = devm_kstrdup(tas_priv->dev, + "acoustic_ctl", GFP_KERNEL); + debugfs_create_file(acoustic_debugfs_node, 0644, debugfs_root, + comp, &acoustic_ctl_fops); +#endif out: if (tas_priv->fw_state == TASDEVICE_RCA_FW_OK) { /* If DSP FW fail, DSP kcontrol won't be created. */