[alsa-devel] [RFC][PATCH 26/26] alsa: ASoC: JZ4740: Add qi_lb60 board driver
This patch adds ASoC support for the qi_lb60 board.
Signed-off-by: Lars-Peter Clausen lars@metafoo.de Cc: Mark Brown broonie@opensource.wolfsonmicro.com Cc: Liam Girdwood lrg@slimlogic.co.uk Cc: alsa-devel@alsa-project.org --- sound/soc/jz4740/Kconfig | 8 ++ sound/soc/jz4740/Makefile | 4 + sound/soc/jz4740/qi_lb60.c | 175 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 187 insertions(+), 0 deletions(-) create mode 100644 sound/soc/jz4740/qi_lb60.c
diff --git a/sound/soc/jz4740/Kconfig b/sound/soc/jz4740/Kconfig index 39df949..aaa116f 100644 --- a/sound/soc/jz4740/Kconfig +++ b/sound/soc/jz4740/Kconfig @@ -11,3 +11,11 @@ config SND_JZ4740_SOC_I2S tristate "SoC Audio (I2S protocol) for Ingenic jz4740 chip" help Say Y if you want to use I2S protocol and I2S codec on Ingenic Jz4740 QI_LB60 board. + +config SND_JZ4740_SOC_QI_LB60 + tristate "SoC Audio support for Qi Hardware Ben Nanonote" + depends on SND_JZ4740_SOC && JZ4740_QI_LB60 + select SND_JZ4740_SOC_I2S + select SND_SOC_JZ4740_CODEC + help + Say Y if you want to add support for SoC audio of internal codec on Ingenic Jz4740 QI_LB60 board. diff --git a/sound/soc/jz4740/Makefile b/sound/soc/jz4740/Makefile index 1be8d19..be873c1 100644 --- a/sound/soc/jz4740/Makefile +++ b/sound/soc/jz4740/Makefile @@ -7,3 +7,7 @@ snd-soc-jz4740-i2s-objs := jz4740-i2s.o obj-$(CONFIG_SND_JZ4740_SOC) += snd-soc-jz4740.o obj-$(CONFIG_SND_JZ4740_SOC_I2S) += snd-soc-jz4740-i2s.o
+# Jz4740 Machine Support +snd-soc-qi-lb60-objs := qi_lb60.o + +obj-$(CONFIG_SND_JZ4740_SOC_QI_LB60) += snd-soc-qi-lb60.o diff --git a/sound/soc/jz4740/qi_lb60.c b/sound/soc/jz4740/qi_lb60.c new file mode 100644 index 0000000..c3f1f91 --- /dev/null +++ b/sound/soc/jz4740/qi_lb60.c @@ -0,0 +1,175 @@ +/* + * Copyright (C) 2009, Lars-Peter Clausen lars@metafoo.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/timer.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <linux/gpio.h> + +#include "../codecs/jz4740-codec.h" +#include "jz4740-pcm.h" +#include "jz4740-i2s.h" + + +#define QI_LB60_SND_GPIO JZ_GPIO_PORTB(29) +#define QI_LB60_AMP_GPIO JZ_GPIO_PORTD(4) + +static int qi_lb60_spk_event(struct snd_soc_dapm_widget *widget, + struct snd_kcontrol *ctrl, int event) +{ + int on = 0; + if (event & SND_SOC_DAPM_POST_PMU) + on = 1; + else if (event & SND_SOC_DAPM_PRE_PMD) + on = 0; + + gpio_set_value(QI_LB60_SND_GPIO, on); + gpio_set_value(QI_LB60_AMP_GPIO, on); + + return 0; +} + +static const struct snd_soc_dapm_widget qi_lb60_widgets[] = { + SND_SOC_DAPM_SPK("Speaker", qi_lb60_spk_event), + SND_SOC_DAPM_MIC("Mic", NULL), +}; + +static const struct snd_soc_dapm_route qi_lb60_routes[] = { + {"Mic", NULL, "MIC"}, + {"Speaker", NULL, "LOUT"}, + {"Speaker", NULL, "ROUT"}, +}; + +#define QI_LB60_DAIFMT (SND_SOC_DAIFMT_I2S | \ + SND_SOC_DAIFMT_NB_NF | \ + SND_SOC_DAIFMT_CBM_CFM) + +static int qi_lb60_codec_init(struct snd_soc_codec *codec) +{ + int ret; + struct snd_soc_dai *cpu_dai = codec->socdev->card->dai_link->cpu_dai; + struct snd_soc_dai *codec_dai = codec->socdev->card->dai_link->codec_dai; + + snd_soc_dapm_nc_pin(codec, "LIN"); + snd_soc_dapm_nc_pin(codec, "RIN"); + + ret = snd_soc_dai_set_fmt(codec_dai, QI_LB60_DAIFMT); + if (ret < 0) { + dev_err(codec->dev, "Failed to set codec dai format: %d\n", ret); + return ret; + } + + ret = snd_soc_dai_set_fmt(cpu_dai, QI_LB60_DAIFMT); + if (ret < 0) { + dev_err(codec->dev, "Failed to set cpu dai format: %d\n", ret); + return ret; + } + + snd_soc_dapm_new_controls(codec, qi_lb60_widgets, ARRAY_SIZE(qi_lb60_widgets)); + + snd_soc_dapm_add_routes(codec, qi_lb60_routes, ARRAY_SIZE(qi_lb60_routes)); + + snd_soc_dapm_sync(codec); + + return 0; +} + +static struct snd_soc_dai_link qi_lb60_dai = { + .name = "jz4740-codec", + .stream_name = "jz4740-codec", + .cpu_dai = &jz4740_i2s_dai, + .codec_dai = &jz4740_codec_dai, + .init = qi_lb60_codec_init, +}; + +static struct snd_soc_card qi_lb60 = { + .name = "QI LB60", + .dai_link = &qi_lb60_dai, + .num_links = 1, + .platform = &jz4740_soc_platform, +}; + +static struct snd_soc_device qi_lb60_snd_devdata = { + .card = &qi_lb60, + .codec_dev = &soc_codec_dev_jz4740_codec, +}; + +static struct platform_device *qi_lb60_snd_device; + +static int __init qi_lb60_init(void) +{ + int ret; + + qi_lb60_snd_device = platform_device_alloc("soc-audio", -1); + + if (!qi_lb60_snd_device) + return -ENOMEM; + + + ret = gpio_request(QI_LB60_SND_GPIO, "SND"); + if (ret) { + pr_err("qi_lb60 snd: Failed to request SND GPIO(%d): %d\n", + QI_LB60_SND_GPIO, ret); + goto err_device_put; + } + + ret = gpio_request(QI_LB60_AMP_GPIO, "AMP"); + if (ret) { + pr_err("qi_lb60 snd: Failed to request AMP GPIO(%d): %d\n", + QI_LB60_AMP_GPIO, ret); + goto err_gpio_free_snd; + } + + gpio_direction_output(JZ_GPIO_PORTB(29), 0); + gpio_direction_output(JZ_GPIO_PORTD(4), 0); + + platform_set_drvdata(qi_lb60_snd_device, &qi_lb60_snd_devdata); + qi_lb60_snd_devdata.dev = &qi_lb60_snd_device->dev; + ret = platform_device_add(qi_lb60_snd_device); + if (ret) { + pr_err("qi_lb60 snd: Failed to add snd soc device: %d\n", ret); + goto err_unset_pdata; + } + + return 0; + +err_unset_pdata: + platform_set_drvdata(qi_lb60_snd_device, NULL); +/*err_gpio_free_amp:*/ + gpio_free(QI_LB60_AMP_GPIO); +err_gpio_free_snd: + gpio_free(QI_LB60_SND_GPIO); +err_device_put: + platform_device_put(qi_lb60_snd_device); + + return ret; +} +module_init(qi_lb60_init); + +static void __exit qi_lb60_exit(void) +{ + gpio_free(QI_LB60_AMP_GPIO); + gpio_free(QI_LB60_SND_GPIO); + platform_device_unregister(qi_lb60_snd_device); +} +module_exit(qi_lb60_exit); + +MODULE_AUTHOR("Lars-Peter Clausen lars@metafoo.de"); +MODULE_DESCRIPTION("ALSA SoC QI LB60 Audio support"); +MODULE_LICENSE("GPL v2");
On Wed, Jun 02, 2010 at 09:15:32PM +0200, Lars-Peter Clausen wrote:
- ret = gpio_request(QI_LB60_SND_GPIO, "SND");
- if (ret) {
pr_err("qi_lb60 snd: Failed to request SND GPIO(%d): %d\n",
QI_LB60_SND_GPIO, ret);
goto err_device_put;
- }
- ret = gpio_request(QI_LB60_AMP_GPIO, "AMP");
- if (ret) {
pr_err("qi_lb60 snd: Failed to request AMP GPIO(%d): %d\n",
QI_LB60_AMP_GPIO, ret);
goto err_gpio_free_snd;
- }
- gpio_direction_output(JZ_GPIO_PORTB(29), 0);
- gpio_direction_output(JZ_GPIO_PORTD(4), 0);
You're referring to the GPIOs by multiple different names - it'd be more robust to pick one way of naming them and use it consistently (probably the #define).
participants (2)
-
Lars-Peter Clausen
-
Mark Brown