Seems like properties parsing and reading was copy-pasted, so "everest,interrupt-src" and "everest,interrupt-clk" are saved into the es8326->jack_pol variable. This might lead to wrong settings being saved into the reg 57 (ES8326_HP_DET).

Fix this by using proper variables while reading properties.

Signed-off-by: Alexey Firago a.firago@yadro.com --- sound/soc/codecs/es8326.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/es8326.c b/sound/soc/codecs/es8326.c index 9ddf6a35e91c..28a0565c2a95 100644 --- a/sound/soc/codecs/es8326.c +++ b/sound/soc/codecs/es8326.c @@ -729,14 +729,16 @@ static int es8326_probe(struct snd_soc_component *component) } dev_dbg(component->dev, "jack-pol %x", es8326->jack_pol);

- ret = device_property_read_u8(component->dev, "everest,interrupt-src", &es8326->jack_pol); + ret = device_property_read_u8(component->dev, "everest,interrupt-src", + &es8326->interrupt_src); if (ret != 0) { dev_dbg(component->dev, "interrupt-src return %d", ret); es8326->interrupt_src = ES8326_HP_DET_SRC_PIN9; } dev_dbg(component->dev, "interrupt-src %x", es8326->interrupt_src);

- ret = device_property_read_u8(component->dev, "everest,interrupt-clk", &es8326->jack_pol); + ret = device_property_read_u8(component->dev, "everest,interrupt-clk", + &es8326->interrupt_clk); if (ret != 0) { dev_dbg(component->dev, "interrupt-clk return %d", ret); es8326->interrupt_clk = 0x45;