[alsa-devel] [PATCH] ASoC: tlv320aic31xx: configure output common-mode voltage
The tlv320aic31xx devices allow to adjust the output common-mode voltage for best analog performance. The datasheet states that the common mode voltage should be set to be <= AVDD/2.
This changes allows to configure the output common-mode voltage via a DT property. If the property is absent the voltage is automatically chosen as the highest voltage below/equal to AVDD/2.
Signed-off-by: Lucas Stach l.stach@pengutronix.de --- .../bindings/sound/tlv320aic31xx.txt | 5 +++ sound/soc/codecs/tlv320aic31xx.c | 45 +++++++++++++++++++ sound/soc/codecs/tlv320aic31xx.h | 8 ++++ 3 files changed, 58 insertions(+)
diff --git a/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt b/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt index 5b3c33bb99e5..e372303697dc 100644 --- a/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt +++ b/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt @@ -29,6 +29,11 @@ Optional properties: 3 or MICBIAS_AVDD - MICBIAS output is connected to AVDD If this node is not mentioned or if the value is unknown, then micbias is set to 2.0V. +- ai31xx-ocmv - output common-mode voltage setting + 0 - 1.35V, + 1 - 1.5V, + 2 - 1.65V, + 3 - 1.8V
Deprecated properties:
diff --git a/sound/soc/codecs/tlv320aic31xx.c b/sound/soc/codecs/tlv320aic31xx.c index df627a08def9..f6f19fdc72f5 100644 --- a/sound/soc/codecs/tlv320aic31xx.c +++ b/sound/soc/codecs/tlv320aic31xx.c @@ -171,6 +171,7 @@ struct aic31xx_priv { int rate_div_line; bool master_dapm_route_applied; int irq; + u8 ocmv; /* output common-mode voltage */ };
struct aic31xx_rate_divs { @@ -1312,6 +1313,11 @@ static int aic31xx_codec_probe(struct snd_soc_component *component) if (ret) return ret;
+ /* set output common-mode voltage */ + snd_soc_component_update_bits(component, AIC31XX_HPDRIVER, + AIC31XX_HPD_OCMV_MASK, + aic31xx->ocmv << AIC31XX_HPD_OCMV_SHIFT); + return 0; }
@@ -1501,6 +1507,43 @@ static irqreturn_t aic31xx_irq(int irq, void *data) return IRQ_NONE; }
+static void aic31xx_configure_ocmv(struct aic31xx_priv *priv) +{ + struct device *dev = priv->dev; + int dvdd, avdd; + u32 value; + + if (dev->fwnode && + fwnode_property_read_u32(dev->fwnode, "ai31xx-ocmv", &value)) { + /* OCMV setting is forced by DT */ + if (value <= 3) { + priv->ocmv = value; + return; + } + } + + avdd = regulator_get_voltage(priv->supplies[3].consumer); + dvdd = regulator_get_voltage(priv->supplies[5].consumer); + + if (avdd > 3600000 || dvdd > 1950000) { + dev_warn(dev, + "Too high supply voltage(s) AVDD: %d, DVDD: %d\n", + avdd, dvdd); + } else if (avdd == 3600000 && dvdd == 1950000) { + priv->ocmv = AIC31XX_HPD_OCMV_1_8V; + } else if (avdd >= 3300000 && dvdd >= 1800000) { + priv->ocmv = AIC31XX_HPD_OCMV_1_65V; + } else if (avdd >= 3000000 && dvdd >= 1650000) { + priv->ocmv = AIC31XX_HPD_OCMV_1_5V; + } else if (avdd >= 2700000 && dvdd >= 1525000) { + priv->ocmv = AIC31XX_HPD_OCMV_1_35V; + } else { + dev_warn(dev, + "Invalid supply voltage(s) AVDD: %d, DVDD: %d\n", + avdd, dvdd); + } +} + static int aic31xx_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { @@ -1570,6 +1613,8 @@ static int aic31xx_i2c_probe(struct i2c_client *i2c, return ret; }
+ aic31xx_configure_ocmv(aic31xx); + if (aic31xx->irq > 0) { regmap_update_bits(aic31xx->regmap, AIC31XX_GPIO1, AIC31XX_GPIO1_FUNC_MASK, diff --git a/sound/soc/codecs/tlv320aic31xx.h b/sound/soc/codecs/tlv320aic31xx.h index cb024955c978..83a8c7604cc3 100644 --- a/sound/soc/codecs/tlv320aic31xx.h +++ b/sound/soc/codecs/tlv320aic31xx.h @@ -232,6 +232,14 @@ struct aic31xx_pdata { #define AIC31XX_HSD_HP 0x01 #define AIC31XX_HSD_HS 0x03
+/* AIC31XX_HPDRIVER */ +#define AIC31XX_HPD_OCMV_MASK GENMASK(4, 3) +#define AIC31XX_HPD_OCMV_SHIFT 3 +#define AIC31XX_HPD_OCMV_1_35V 0x0 +#define AIC31XX_HPD_OCMV_1_5V 0x1 +#define AIC31XX_HPD_OCMV_1_65V 0x2 +#define AIC31XX_HPD_OCMV_1_8V 0x3 + /* AIC31XX_MICBIAS */ #define AIC31XX_MICBIAS_MASK GENMASK(1, 0) #define AIC31XX_MICBIAS_SHIFT 0
The patch
ASoC: tlv320aic31xx: configure output common-mode voltage
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-5.5
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
From e48fdb53bd1fa50796b5a050e6e31fde3891a2c8 Mon Sep 17 00:00:00 2001
From: Lucas Stach l.stach@pengutronix.de Date: Mon, 18 Nov 2019 16:12:06 +0100 Subject: [PATCH] ASoC: tlv320aic31xx: configure output common-mode voltage
The tlv320aic31xx devices allow to adjust the output common-mode voltage for best analog performance. The datasheet states that the common mode voltage should be set to be <= AVDD/2.
This changes allows to configure the output common-mode voltage via a DT property. If the property is absent the voltage is automatically chosen as the highest voltage below/equal to AVDD/2.
Signed-off-by: Lucas Stach l.stach@pengutronix.de Link: https://lore.kernel.org/r/20191118151207.28576-1-l.stach@pengutronix.de Signed-off-by: Mark Brown broonie@kernel.org --- .../bindings/sound/tlv320aic31xx.txt | 5 +++ sound/soc/codecs/tlv320aic31xx.c | 45 +++++++++++++++++++ sound/soc/codecs/tlv320aic31xx.h | 8 ++++ 3 files changed, 58 insertions(+)
diff --git a/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt b/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt index 5b3c33bb99e5..e372303697dc 100644 --- a/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt +++ b/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt @@ -29,6 +29,11 @@ Optional properties: 3 or MICBIAS_AVDD - MICBIAS output is connected to AVDD If this node is not mentioned or if the value is unknown, then micbias is set to 2.0V. +- ai31xx-ocmv - output common-mode voltage setting + 0 - 1.35V, + 1 - 1.5V, + 2 - 1.65V, + 3 - 1.8V
Deprecated properties:
diff --git a/sound/soc/codecs/tlv320aic31xx.c b/sound/soc/codecs/tlv320aic31xx.c index df627a08def9..f6f19fdc72f5 100644 --- a/sound/soc/codecs/tlv320aic31xx.c +++ b/sound/soc/codecs/tlv320aic31xx.c @@ -171,6 +171,7 @@ struct aic31xx_priv { int rate_div_line; bool master_dapm_route_applied; int irq; + u8 ocmv; /* output common-mode voltage */ };
struct aic31xx_rate_divs { @@ -1312,6 +1313,11 @@ static int aic31xx_codec_probe(struct snd_soc_component *component) if (ret) return ret;
+ /* set output common-mode voltage */ + snd_soc_component_update_bits(component, AIC31XX_HPDRIVER, + AIC31XX_HPD_OCMV_MASK, + aic31xx->ocmv << AIC31XX_HPD_OCMV_SHIFT); + return 0; }
@@ -1501,6 +1507,43 @@ static irqreturn_t aic31xx_irq(int irq, void *data) return IRQ_NONE; }
+static void aic31xx_configure_ocmv(struct aic31xx_priv *priv) +{ + struct device *dev = priv->dev; + int dvdd, avdd; + u32 value; + + if (dev->fwnode && + fwnode_property_read_u32(dev->fwnode, "ai31xx-ocmv", &value)) { + /* OCMV setting is forced by DT */ + if (value <= 3) { + priv->ocmv = value; + return; + } + } + + avdd = regulator_get_voltage(priv->supplies[3].consumer); + dvdd = regulator_get_voltage(priv->supplies[5].consumer); + + if (avdd > 3600000 || dvdd > 1950000) { + dev_warn(dev, + "Too high supply voltage(s) AVDD: %d, DVDD: %d\n", + avdd, dvdd); + } else if (avdd == 3600000 && dvdd == 1950000) { + priv->ocmv = AIC31XX_HPD_OCMV_1_8V; + } else if (avdd >= 3300000 && dvdd >= 1800000) { + priv->ocmv = AIC31XX_HPD_OCMV_1_65V; + } else if (avdd >= 3000000 && dvdd >= 1650000) { + priv->ocmv = AIC31XX_HPD_OCMV_1_5V; + } else if (avdd >= 2700000 && dvdd >= 1525000) { + priv->ocmv = AIC31XX_HPD_OCMV_1_35V; + } else { + dev_warn(dev, + "Invalid supply voltage(s) AVDD: %d, DVDD: %d\n", + avdd, dvdd); + } +} + static int aic31xx_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { @@ -1570,6 +1613,8 @@ static int aic31xx_i2c_probe(struct i2c_client *i2c, return ret; }
+ aic31xx_configure_ocmv(aic31xx); + if (aic31xx->irq > 0) { regmap_update_bits(aic31xx->regmap, AIC31XX_GPIO1, AIC31XX_GPIO1_FUNC_MASK, diff --git a/sound/soc/codecs/tlv320aic31xx.h b/sound/soc/codecs/tlv320aic31xx.h index cb024955c978..83a8c7604cc3 100644 --- a/sound/soc/codecs/tlv320aic31xx.h +++ b/sound/soc/codecs/tlv320aic31xx.h @@ -232,6 +232,14 @@ struct aic31xx_pdata { #define AIC31XX_HSD_HP 0x01 #define AIC31XX_HSD_HS 0x03
+/* AIC31XX_HPDRIVER */ +#define AIC31XX_HPD_OCMV_MASK GENMASK(4, 3) +#define AIC31XX_HPD_OCMV_SHIFT 3 +#define AIC31XX_HPD_OCMV_1_35V 0x0 +#define AIC31XX_HPD_OCMV_1_5V 0x1 +#define AIC31XX_HPD_OCMV_1_65V 0x2 +#define AIC31XX_HPD_OCMV_1_8V 0x3 + /* AIC31XX_MICBIAS */ #define AIC31XX_MICBIAS_MASK GENMASK(1, 0) #define AIC31XX_MICBIAS_SHIFT 0
participants (2)
-
Lucas Stach
-
Mark Brown