[alsa-devel] [PATCH] regulator: Convert WM835x to use get_voltage_sel()
Signed-off-by: Mark Brown broonie@opensource.wolfsonmicro.com --- drivers/regulator/wm8350-regulator.c | 16 ++++++---------- 1 files changed, 6 insertions(+), 10 deletions(-)
diff --git a/drivers/regulator/wm8350-regulator.c b/drivers/regulator/wm8350-regulator.c index 7e45b0d..1bcb22c 100644 --- a/drivers/regulator/wm8350-regulator.c +++ b/drivers/regulator/wm8350-regulator.c @@ -405,11 +405,10 @@ static int wm8350_dcdc_set_voltage(struct regulator_dev *rdev, int min_uV, return 0; }
-static int wm8350_dcdc_get_voltage(struct regulator_dev *rdev) +static int wm8350_dcdc_get_voltage_sel(struct regulator_dev *rdev) { struct wm8350 *wm8350 = rdev_get_drvdata(rdev); int volt_reg, dcdc = rdev_get_id(rdev); - u16 val;
switch (dcdc) { case WM8350_DCDC_1: @@ -431,8 +430,7 @@ static int wm8350_dcdc_get_voltage(struct regulator_dev *rdev) }
/* all DCDCs have same mV bits */ - val = wm8350_reg_read(wm8350, volt_reg) & WM8350_DC1_VSEL_MASK; - return wm8350_dcdc_val_to_mvolts(val) * 1000; + return wm8350_reg_read(wm8350, volt_reg) & WM8350_DC1_VSEL_MASK; }
static int wm8350_dcdc_list_voltage(struct regulator_dev *rdev, @@ -807,11 +805,10 @@ static int wm8350_ldo_set_voltage(struct regulator_dev *rdev, int min_uV, return 0; }
-static int wm8350_ldo_get_voltage(struct regulator_dev *rdev) +static int wm8350_ldo_get_voltage_sel(struct regulator_dev *rdev) { struct wm8350 *wm8350 = rdev_get_drvdata(rdev); int volt_reg, ldo = rdev_get_id(rdev); - u16 val;
switch (ldo) { case WM8350_LDO_1: @@ -831,8 +828,7 @@ static int wm8350_ldo_get_voltage(struct regulator_dev *rdev) }
/* all LDOs have same mV bits */ - val = wm8350_reg_read(wm8350, volt_reg) & WM8350_LDO1_VSEL_MASK; - return wm8350_ldo_val_to_mvolts(val) * 1000; + return wm8350_reg_read(wm8350, volt_reg) & WM8350_LDO1_VSEL_MASK; }
static int wm8350_ldo_list_voltage(struct regulator_dev *rdev, @@ -1229,7 +1225,7 @@ static int wm8350_ldo_is_enabled(struct regulator_dev *rdev)
static struct regulator_ops wm8350_dcdc_ops = { .set_voltage = wm8350_dcdc_set_voltage, - .get_voltage = wm8350_dcdc_get_voltage, + .get_voltage_sel = wm8350_dcdc_get_voltage_sel, .list_voltage = wm8350_dcdc_list_voltage, .enable = wm8350_dcdc_enable, .disable = wm8350_dcdc_disable, @@ -1253,7 +1249,7 @@ static struct regulator_ops wm8350_dcdc2_5_ops = {
static struct regulator_ops wm8350_ldo_ops = { .set_voltage = wm8350_ldo_set_voltage, - .get_voltage = wm8350_ldo_get_voltage, + .get_voltage_sel = wm8350_ldo_get_voltage_sel, .list_voltage = wm8350_ldo_list_voltage, .enable = wm8350_ldo_enable, .disable = wm8350_ldo_disable,
On Thu, 2010-12-16 at 11:48 +0000, Mark Brown wrote:
Signed-off-by: Mark Brown broonie@opensource.wolfsonmicro.com
drivers/regulator/wm8350-regulator.c | 16 ++++++---------- 1 files changed, 6 insertions(+), 10 deletions(-)
Applied.
Thanks
Liam
participants (2)
-
Liam Girdwood
-
Mark Brown