[PATCH v2] ASoC: Intel: sof_rt5682: Add support for jsl_rt5682_rt1019
This patch adds the driver data for rt5682 support jsl_rt5682_rt1019.
Signed-off-by: Sean Hong sean.hong@quanta.corp-partner.google.com --- sound/soc/intel/boards/sof_rt5682.c | 9 +++++++++ sound/soc/intel/common/soc-acpi-intel-jsl-match.c | 12 ++++++++++++ 2 files changed, 21 insertions(+)
diff --git a/sound/soc/intel/boards/sof_rt5682.c b/sound/soc/intel/boards/sof_rt5682.c index 045965312..3a840f3a9 100644 --- a/sound/soc/intel/boards/sof_rt5682.c +++ b/sound/soc/intel/boards/sof_rt5682.c @@ -1100,6 +1100,15 @@ static const struct platform_device_id board_ids[] = { SOF_RT5682_SSP_AMP(1) | SOF_RT5682_NUM_HDMIDEV(4)), }, + { + .name = "jsl_rt5682_rt1019", + .driver_data = (kernel_ulong_t)(SOF_RT5682_MCLK_EN | + SOF_RT5682_MCLK_24MHZ | + SOF_RT5682_SSP_CODEC(0) | + SOF_SPEAKER_AMP_PRESENT | + SOF_RT1019_SPEAKER_AMP_PRESENT | + SOF_RT5682_SSP_AMP(1)), + }, { } }; MODULE_DEVICE_TABLE(platform, board_ids); diff --git a/sound/soc/intel/common/soc-acpi-intel-jsl-match.c b/sound/soc/intel/common/soc-acpi-intel-jsl-match.c index b95c4b2cd..e374bf163 100644 --- a/sound/soc/intel/common/soc-acpi-intel-jsl-match.c +++ b/sound/soc/intel/common/soc-acpi-intel-jsl-match.c @@ -29,6 +29,11 @@ static const struct snd_soc_acpi_codecs rt1015p_spk = { .codecs = {"RTL1015"} };
+static struct snd_soc_acpi_codecs rt1019p_spk = { + .num_codecs = 1, + .codecs = {"RTL1019"} +}; + static const struct snd_soc_acpi_codecs mx98360a_spk = { .num_codecs = 1, .codecs = {"MX98360A"} @@ -78,6 +83,13 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_jsl_machines[] = { .quirk_data = &mx98360a_spk, .sof_tplg_filename = "sof-jsl-rt5682-mx98360a.tplg", }, + { + .comp_ids = &rt5682_rt5682s_hp, + .drv_name = "jsl_rt5682_rt1019", + .machine_quirk = snd_soc_acpi_codec_list, + .quirk_data = &rt1019p_spk, + .sof_tplg_filename = "sof-jsl-rt5682-rt1019.tplg", + }, { .id = "10134242", .drv_name = "jsl_cs4242_mx98360a",
On 8/16/22 09:54, Sean Hong wrote:
This patch adds the driver data for rt5682 support jsl_rt5682_rt1019.
Signed-off-by: Sean Hong sean.hong@quanta.corp-partner.google.com
sound/soc/intel/boards/sof_rt5682.c | 9 +++++++++ sound/soc/intel/common/soc-acpi-intel-jsl-match.c | 12 ++++++++++++ 2 files changed, 21 insertions(+)
diff --git a/sound/soc/intel/boards/sof_rt5682.c b/sound/soc/intel/boards/sof_rt5682.c index 045965312..3a840f3a9 100644 --- a/sound/soc/intel/boards/sof_rt5682.c +++ b/sound/soc/intel/boards/sof_rt5682.c @@ -1100,6 +1100,15 @@ static const struct platform_device_id board_ids[] = { SOF_RT5682_SSP_AMP(1) | SOF_RT5682_NUM_HDMIDEV(4)), },
- {
.name = "jsl_rt5682_rt1019",.driver_data = (kernel_ulong_t)(SOF_RT5682_MCLK_EN |SOF_RT5682_MCLK_24MHZ |
I see it's the same setting for all JSL devices but I am having doubts on this MCLK. Is this 24MHz value correct for JSL? It's derived from ICL so in theory the MCLK should be a multiple of 19.2MHz if the root frequency was the oscillator.
Is this intentional?
SOF_RT5682_SSP_CODEC(0) |SOF_SPEAKER_AMP_PRESENT |SOF_RT1019_SPEAKER_AMP_PRESENT |SOF_RT5682_SSP_AMP(1)),- }, { }
}; MODULE_DEVICE_TABLE(platform, board_ids); diff --git a/sound/soc/intel/common/soc-acpi-intel-jsl-match.c b/sound/soc/intel/common/soc-acpi-intel-jsl-match.c index b95c4b2cd..e374bf163 100644 --- a/sound/soc/intel/common/soc-acpi-intel-jsl-match.c +++ b/sound/soc/intel/common/soc-acpi-intel-jsl-match.c @@ -29,6 +29,11 @@ static const struct snd_soc_acpi_codecs rt1015p_spk = { .codecs = {"RTL1015"} };
+static struct snd_soc_acpi_codecs rt1019p_spk = {
- .num_codecs = 1,
- .codecs = {"RTL1019"}
+};
static const struct snd_soc_acpi_codecs mx98360a_spk = { .num_codecs = 1, .codecs = {"MX98360A"} @@ -78,6 +83,13 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_jsl_machines[] = { .quirk_data = &mx98360a_spk, .sof_tplg_filename = "sof-jsl-rt5682-mx98360a.tplg", },
- {
.comp_ids = &rt5682_rt5682s_hp,.drv_name = "jsl_rt5682_rt1019",.machine_quirk = snd_soc_acpi_codec_list,.quirk_data = &rt1019p_spk,.sof_tplg_filename = "sof-jsl-rt5682-rt1019.tplg",- }, { .id = "10134242", .drv_name = "jsl_cs4242_mx98360a",
On 8/16/22 09:54, Sean Hong wrote:
This patch adds the driver data for rt5682 support jsl_rt5682_rt1019.
Signed-off-by: Sean Hong sean.hong@quanta.corp-partner.google.com
sound/soc/intel/boards/sof_rt5682.c | 9 +++++++++ sound/soc/intel/common/soc-acpi-intel-jsl-match.c | 12 ++++++++++++ 2 files changed, 21 insertions(+)
diff --git a/sound/soc/intel/boards/sof_rt5682.c b/sound/soc/intel/boards/sof_rt5682.c index 045965312..3a840f3a9 100644 --- a/sound/soc/intel/boards/sof_rt5682.c +++ b/sound/soc/intel/boards/sof_rt5682.c @@ -1100,6 +1100,15 @@ static const struct platform_device_id
board_ids[] = {
SOF_RT5682_SSP_AMP(1) | SOF_RT5682_NUM_HDMIDEV(4)),},
- {
.name = "jsl_rt5682_rt1019",.driver_data = (kernel_ulong_t)(SOF_RT5682_MCLK_EN |SOF_RT5682_MCLK_24MHZ |I see it's the same setting for all JSL devices but I am having doubts on this MCLK. Is this 24MHz value correct for JSL? It's derived from ICL so in theory the MCLK should be a multiple of 19.2MHz if the root frequency was the oscillator.
Is this intentional?
I've checked some internal wiki page and sof git log. It seems the first amp enabled on JSL is max98373 running in TDM 4 slot 100fs so 24MHz MCLK seems to be a reasonable choice. The commis is 5340225a7 ("topology: Add JSL da7219+max98373 support")
+# SSP 1 (ID: 0) +DAI_CONFIG(SSP, SPK_INDEX, 0, SPK_NAME, + SSP_CONFIG(DSP_B, SSP_CLOCK(mclk, 24000000, codec_mclk_in), + SSP_CLOCK(bclk, 4800000, codec_slave), + SSP_CLOCK(fsync, 48000, codec_slave), + SSP_TDM(4, 25, 3, 240), + SSP_CONFIG_DATA(SSP, SPK_INDEX, 16)))
I've also tested 19.2MHz on JSL boards and it also works. 1K sinetone playback sounds ok. Since JSL boards are using 2.304 MHz bclk for max98360a and 3.072 MHz bclk for alc1015 now, changing to 19.2 MHz mclk seems no benefit.
Regards, Brent
SOF_RT5682_SSP_CODEC(0) |SOF_SPEAKER_AMP_PRESENT |SOF_RT1019_SPEAKER_AMP_PRESENT |
SOF_RT5682_SSP_AMP(1)),- }, { }
}; MODULE_DEVICE_TABLE(platform, board_ids); diff --git a/sound/soc/intel/common/soc-acpi-intel-jsl-match.c b/sound/soc/intel/common/soc-acpi-intel-jsl-match.c index b95c4b2cd..e374bf163 100644 --- a/sound/soc/intel/common/soc-acpi-intel-jsl-match.c +++ b/sound/soc/intel/common/soc-acpi-intel-jsl-match.c @@ -29,6 +29,11 @@ static const struct snd_soc_acpi_codecs rt1015p_spk
= {
.codecs = {"RTL1015"} };
+static struct snd_soc_acpi_codecs rt1019p_spk = {
- .num_codecs = 1,
- .codecs = {"RTL1019"}
+};
static const struct snd_soc_acpi_codecs mx98360a_spk = { .num_codecs = 1, .codecs = {"MX98360A"} @@ -78,6 +83,13 @@ struct snd_soc_acpi_mach
snd_soc_acpi_intel_jsl_machines[] = {
.quirk_data = &mx98360a_spk, .sof_tplg_filename = "sof-jsl-rt5682-mx98360a.tplg",},
- {
.comp_ids = &rt5682_rt5682s_hp,.drv_name = "jsl_rt5682_rt1019",.machine_quirk = snd_soc_acpi_codec_list,.quirk_data = &rt1019p_spk,.sof_tplg_filename = "sof-jsl-rt5682-rt1019.tplg",- }, { .id = "10134242", .drv_name = "jsl_cs4242_mx98360a",
On 9/5/22 10:07, Lu, Brent wrote:
On 8/16/22 09:54, Sean Hong wrote:
This patch adds the driver data for rt5682 support jsl_rt5682_rt1019.
Signed-off-by: Sean Hong sean.hong@quanta.corp-partner.google.com
sound/soc/intel/boards/sof_rt5682.c | 9 +++++++++ sound/soc/intel/common/soc-acpi-intel-jsl-match.c | 12 ++++++++++++ 2 files changed, 21 insertions(+)
diff --git a/sound/soc/intel/boards/sof_rt5682.c b/sound/soc/intel/boards/sof_rt5682.c index 045965312..3a840f3a9 100644 --- a/sound/soc/intel/boards/sof_rt5682.c +++ b/sound/soc/intel/boards/sof_rt5682.c @@ -1100,6 +1100,15 @@ static const struct platform_device_id
board_ids[] = {
SOF_RT5682_SSP_AMP(1) | SOF_RT5682_NUM_HDMIDEV(4)),},
- {
.name = "jsl_rt5682_rt1019",.driver_data = (kernel_ulong_t)(SOF_RT5682_MCLK_EN |SOF_RT5682_MCLK_24MHZ |I see it's the same setting for all JSL devices but I am having doubts on this MCLK. Is this 24MHz value correct for JSL? It's derived from ICL so in theory the MCLK should be a multiple of 19.2MHz if the root frequency was the oscillator.
Is this intentional?
I've checked some internal wiki page and sof git log. It seems the first amp enabled on JSL is max98373 running in TDM 4 slot 100fs so 24MHz MCLK seems to be a reasonable choice. The commis is 5340225a7 ("topology: Add JSL da7219+max98373 support")
+# SSP 1 (ID: 0) +DAI_CONFIG(SSP, SPK_INDEX, 0, SPK_NAME,
SSP_CONFIG(DSP_B, SSP_CLOCK(mclk, 24000000, codec_mclk_in),SSP_CLOCK(bclk, 4800000, codec_slave),SSP_CLOCK(fsync, 48000, codec_slave),SSP_TDM(4, 25, 3, 240),SSP_CONFIG_DATA(SSP, SPK_INDEX, 16)))I've also tested 19.2MHz on JSL boards and it also works. 1K sinetone playback sounds ok. Since JSL boards are using 2.304 MHz bclk for max98360a and 3.072 MHz bclk for alc1015 now, changing to 19.2 MHz mclk seems no benefit.
Functionally there should be no difference, but the 24 MHz MCLK can only be created on JSL from the 96 MHz HDaudio PLL while the 19.2 MHz can be divided from the oscillator.
I guess it's too late to optimize now that the topology files are in use so here is my Ack:
Acked-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com
but that's a clear miss in the topology reviews.
participants (3)
-
Lu, Brent -
Pierre-Louis Bossart -
Sean Hong