[alsa-devel] [PATCH] sscape: drop redundant fields from soundscape struct
From: Krzysztof Helt krzysztof.h1@wp.pl
The wss_base is disguised parameter for one function. It is converted to a function parameter.
The code_type is only set but never read. It is removed.
The midi_vol is set only to 0 so it does not work as detection of change in midi volume. It is removed.
The xport variable is alias to the port[dev]. Use the port[dev] directly to increase readability.
Signed-off-by: Krzysztof Helt krzysztof.h1@wp.pl --- sound/isa/sscape.c | 42 ++++++++++++++---------------------------- 1 files changed, 14 insertions(+), 28 deletions(-)
diff --git a/sound/isa/sscape.c b/sound/isa/sscape.c index 681e223..c6a90f0 100644 --- a/sound/isa/sscape.c +++ b/sound/isa/sscape.c @@ -135,8 +135,6 @@ enum card_type { struct soundscape { spinlock_t lock; unsigned io_base; - unsigned wss_base; - int codec_type; int ic_type; enum card_type type; struct resource *io_res; @@ -152,7 +150,6 @@ struct soundscape { spinlock_t fwlock; int hw_in_use; unsigned long midi_usage; - unsigned char midi_vol; };
#define INVALID_IRQ ((unsigned)-1) @@ -760,14 +757,9 @@ static int sscape_midi_put(struct snd_kcontrol *kctl, * and then perform another volume-related command. Perhaps the * first command is an "open" and the second command is a "close"? */ - if (s->midi_vol == ((unsigned char) uctl->value.integer. value[0] & 127)) { - change = 0; - goto __skip_change; - } change = (host_write_ctrl_unsafe(s->io_base, CMD_SET_MIDI_VOL, 100) && host_write_ctrl_unsafe(s->io_base, ((unsigned char) uctl->value.integer. value[0]) & 127, 100) && host_write_ctrl_unsafe(s->io_base, CMD_XXX_MIDI_VOL, 100)); - __skip_change:
/* * Take the board out of HOST mode and back into MIDI mode ... @@ -809,12 +801,11 @@ static unsigned __devinit get_irq_config(int irq) * Perform certain arcane port-checks to see whether there * is a SoundScape board lurking behind the given ports. */ -static int __devinit detect_sscape(struct soundscape *s) +static int __devinit detect_sscape(struct soundscape *s, long wss_io) { unsigned long flags; unsigned d; int retval = 0; - int codec = s->wss_base;
spin_lock_irqsave(&s->lock, flags);
@@ -830,13 +821,11 @@ static int __devinit detect_sscape(struct soundscape *s) if ((d & 0x80) != 0) goto _done;
- if (d == 0) { - s->codec_type = 1; + if (d == 0) s->ic_type = IC_ODIE; - } else if ((d & 0x60) != 0) { - s->codec_type = 2; + else if ((d & 0x60) != 0) s->ic_type = IC_OPUS; - } else + else goto _done;
outb(0xfa, ODIE_ADDR_IO(s->io_base)); @@ -856,10 +845,10 @@ static int __devinit detect_sscape(struct soundscape *s) sscape_write_unsafe(s->io_base, GA_HMCTL_REG, d | 0xc0);
if (s->type == SSCAPE_VIVO) - codec += 4; + wss_io += 4; /* wait for WSS codec */ for (d = 0; d < 500; d++) { - if ((inb(codec) & 0x80) == 0) + if ((inb(wss_io) & 0x80) == 0) break; spin_unlock_irqrestore(&s->lock, flags); msleep(1); @@ -1057,7 +1046,6 @@ static int __devinit create_sscape(int dev, struct snd_card *card) unsigned dma_cfg; unsigned irq_cfg; unsigned mpu_irq_cfg; - unsigned xport; struct resource *io_res; struct resource *wss_res; unsigned long flags; @@ -1077,15 +1065,15 @@ static int __devinit create_sscape(int dev, struct snd_card *card) printk(KERN_ERR "sscape: Invalid IRQ %d\n", mpu_irq[dev]); return -ENXIO; } - xport = port[dev];
/* * Grab IO ports that we will need to probe so that we * can detect and control this hardware ... */ - io_res = request_region(xport, 8, "SoundScape"); + io_res = request_region(port[dev], 8, "SoundScape"); if (!io_res) { - snd_printk(KERN_ERR "sscape: can't grab port 0x%x\n", xport); + snd_printk(KERN_ERR + "sscape: can't grab port 0x%lx\n", port[dev]); return -EBUSY; } wss_res = NULL; @@ -1112,10 +1100,9 @@ static int __devinit create_sscape(int dev, struct snd_card *card) spin_lock_init(&sscape->fwlock); sscape->io_res = io_res; sscape->wss_res = wss_res; - sscape->io_base = xport; - sscape->wss_base = wss_port[dev]; + sscape->io_base = port[dev];
- if (!detect_sscape(sscape)) { + if (!detect_sscape(sscape, wss_port[dev])) { printk(KERN_ERR "sscape: hardware not detected at 0x%x\n", sscape->io_base); err = -ENODEV; goto _release_dma; @@ -1188,11 +1175,11 @@ static int __devinit create_sscape(int dev, struct snd_card *card) } #define MIDI_DEVNUM 0 if (sscape->type != SSCAPE_VIVO) { - err = create_mpu401(card, MIDI_DEVNUM, xport, mpu_irq[dev]); + err = create_mpu401(card, MIDI_DEVNUM, port[dev], mpu_irq[dev]); if (err < 0) { printk(KERN_ERR "sscape: Failed to create " - "MPU-401 device at 0x%x\n", - xport); + "MPU-401 device at 0x%lx\n", + port[dev]); goto _release_dma; }
@@ -1204,7 +1191,6 @@ static int __devinit create_sscape(int dev, struct snd_card *card) /* * Initialize mixer */ - sscape->midi_vol = 0; host_write_ctrl_unsafe(sscape->io_base, CMD_SET_MIDI_VOL, 100); host_write_ctrl_unsafe(sscape->io_base, 0, 100); host_write_ctrl_unsafe(sscape->io_base, CMD_XXX_MIDI_VOL, 100);
At Sun, 1 Feb 2009 21:12:31 +0100, Krzysztof Helt wrote:
The midi_vol is set only to 0 so it does not work as detection of change in midi volume. It is removed.
It's used to cache the value. You should better to keep it, but fix sscape_midi_put() function to remember the last uctl->value.integer.value[0] value in this field. (And also better to change sscape_midi_get() to return midi_vol value.)
Other changes look good.
Thanks!
Takashi
participants (2)
-
Krzysztof Helt
-
Takashi Iwai