Yamaha YIT-W12TX not working
Hi list,
Yamaha YIT-W12TX is a USB dongle which allows to transmit audio from PC to the YSP-4300 sound bar [1][2]. While it is quite old and no longer sold, I recently tried to make it work under linux. Unfortunately, it did not work:
[ 3676.366404] usb 2-1.1: new full-speed USB device number 5 using ehci-pci [ 3676.445995] usb 2-1.1: config 1 has an invalid interface number: 4 but max is 3 [ 3676.446001] usb 2-1.1: config 1 has no interface number 2 [ 3676.446664] usb 2-1.1: New USB device found, idVendor=0499, idProduct=3108, bcdDevice= 1.00 [ 3676.446666] usb 2-1.1: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 3676.446679] usb 2-1.1: Product: YIT-W12TX [ 3676.446683] usb 2-1.1: Manufacturer: YAMAHA Corp. [ 3676.449508] hid-generic 0003:0499:3108.0001: hiddev96,hidraw0: USB HID v0.01 Device [YAMAHA Corp. YIT-W12TX] on usb-0000:00:1d.0-1.1/input3 [ 3676.450846] input: YAMAHA Corp. YIT-W12TX as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.4/0003:0499:3108.0002/input/input34 [ 3676.503844] hid-generic 0003:0499:3108.0002: input,hidraw1: USB HID v1.00 Device [YAMAHA Corp. YIT-W12TX] on usb-0000:00:1d.0-1.1/input4 [ 3676.671641] usb 2-1.1: 1:1: cannot get freq at ep 0x1 [ 3676.675786] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.676476] usbcore: registered new interface driver snd-usb-audio [ 3676.731911] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.735658] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.739399] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.743131] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.746920] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.750648] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.754445] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.758524] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.762274] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.789671] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.790049] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.790414] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.790773] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.791169] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.792134] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.792547] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.792899] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.793254] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.793634] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.794900] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.795255] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.795634] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.796008] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.796384] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.797543] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.797879] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.798254] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.798634] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.799007] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.813819] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.814281] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.814686] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.815281] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.815929] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.817807] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.818155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.818592] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.819165] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.819801] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.822163] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.822802] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.823284] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.824161] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.824907] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.827683] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.828159] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.828675] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.829415] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.830157] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.841801] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.842155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.842551] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.843158] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.843785] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.844909] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.845283] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.845673] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.846156] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.846800] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.848287] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.848799] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.849280] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.850031] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.850799] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.852677] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.853154] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.853674] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.854429] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.855155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.858916] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.859277] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.859672] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.860280] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.860909] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.862033] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.862418] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.862797] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.863279] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.863923] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.865471] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.866033] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.866590] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.867410] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.868157] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.870162] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.870674] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.871155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.871908] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.872676] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.900672] usb 2-1.1: USB disconnect, device number 5 [ 3676.900688] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
This is with kernel-5.9.13-200.fc33.x86_64 and alsa-lib-1.2.4-5.fc33.x86_64 on Fedora 33. Under Windows 10 the dongle works without any special drivers from Yamaha, everything appears to be downloaded by Windows automatically, so I was hoping the device could be made to work under Linux relatively easily.
Best regards, Julian
[1] https://europe.yamaha.com/en/products/audio_visual/accessories/yit-w12/downl... [2] https://europe.yamaha.com/en/products/audio_visual/sound_bar/ysp-4300/downlo...
Am 13.12.2020 um 10:51 schrieb Julian Sikorski:
Hi list,
Yamaha YIT-W12TX is a USB dongle which allows to transmit audio from PC to the YSP-4300 sound bar [1][2]. While it is quite old and no longer sold, I recently tried to make it work under linux. Unfortunately, it did not work:
[ 3676.366404] usb 2-1.1: new full-speed USB device number 5 using ehci-pci [ 3676.445995] usb 2-1.1: config 1 has an invalid interface number: 4 but max is 3 [ 3676.446001] usb 2-1.1: config 1 has no interface number 2 [ 3676.446664] usb 2-1.1: New USB device found, idVendor=0499, idProduct=3108, bcdDevice= 1.00 [ 3676.446666] usb 2-1.1: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 3676.446679] usb 2-1.1: Product: YIT-W12TX [ 3676.446683] usb 2-1.1: Manufacturer: YAMAHA Corp. [ 3676.449508] hid-generic 0003:0499:3108.0001: hiddev96,hidraw0: USB HID v0.01 Device [YAMAHA Corp. YIT-W12TX] on usb-0000:00:1d.0-1.1/input3 [ 3676.450846] input: YAMAHA Corp. YIT-W12TX as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.4/0003:0499:3108.0002/input/input34 [ 3676.503844] hid-generic 0003:0499:3108.0002: input,hidraw1: USB HID v1.00 Device [YAMAHA Corp. YIT-W12TX] on usb-0000:00:1d.0-1.1/input4 [ 3676.671641] usb 2-1.1: 1:1: cannot get freq at ep 0x1 [ 3676.675786] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.676476] usbcore: registered new interface driver snd-usb-audio [ 3676.731911] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.735658] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.739399] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.743131] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.746920] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.750648] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.754445] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.758524] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.762274] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.789671] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.790049] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.790414] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.790773] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.791169] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.792134] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.792547] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.792899] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.793254] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.793634] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.794900] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.795255] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.795634] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.796008] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.796384] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.797543] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.797879] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.798254] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.798634] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.799007] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.813819] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.814281] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.814686] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.815281] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.815929] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.817807] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.818155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.818592] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.819165] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.819801] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.822163] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.822802] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.823284] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.824161] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.824907] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.827683] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.828159] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.828675] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.829415] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.830157] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.841801] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.842155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.842551] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.843158] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.843785] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.844909] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.845283] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.845673] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.846156] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.846800] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.848287] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.848799] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.849280] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.850031] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.850799] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.852677] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.853154] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.853674] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.854429] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.855155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.858916] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.859277] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.859672] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.860280] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.860909] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.862033] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.862418] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.862797] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.863279] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.863923] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.865471] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.866033] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.866590] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.867410] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.868157] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.870162] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.870674] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.871155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.871908] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.872676] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.900672] usb 2-1.1: USB disconnect, device number 5 [ 3676.900688] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
This is with kernel-5.9.13-200.fc33.x86_64 and alsa-lib-1.2.4-5.fc33.x86_64 on Fedora 33. Under Windows 10 the dongle works without any special drivers from Yamaha, everything appears to be downloaded by Windows automatically, so I was hoping the device could be made to work under Linux relatively easily.
Best regards, Julian
[1] https://europe.yamaha.com/en/products/audio_visual/accessories/yit-w12/downl... [2] https://europe.yamaha.com/en/products/audio_visual/sound_bar/ysp-4300/downlo...
Hello,
3 years later I am still hoping for getting the device working. I am on 6.5 kernel and Fedora 39. I am attaching Windows' driver details screenshot as well as the inf file used. Does USB audio driver under linux have any parameters I could try?
Best regards, Julian
Am 17.11.23 um 15:31 schrieb Julian Sikorski:
Am 13.12.2020 um 10:51 schrieb Julian Sikorski:
Hi list,
Yamaha YIT-W12TX is a USB dongle which allows to transmit audio from PC to the YSP-4300 sound bar [1][2]. While it is quite old and no longer sold, I recently tried to make it work under linux. Unfortunately, it did not work:
[ 3676.366404] usb 2-1.1: new full-speed USB device number 5 using ehci-pci [ 3676.445995] usb 2-1.1: config 1 has an invalid interface number: 4 but max is 3 [ 3676.446001] usb 2-1.1: config 1 has no interface number 2 [ 3676.446664] usb 2-1.1: New USB device found, idVendor=0499, idProduct=3108, bcdDevice= 1.00 [ 3676.446666] usb 2-1.1: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 3676.446679] usb 2-1.1: Product: YIT-W12TX [ 3676.446683] usb 2-1.1: Manufacturer: YAMAHA Corp. [ 3676.449508] hid-generic 0003:0499:3108.0001: hiddev96,hidraw0: USB HID v0.01 Device [YAMAHA Corp. YIT-W12TX] on usb-0000:00:1d.0-1.1/input3 [ 3676.450846] input: YAMAHA Corp. YIT-W12TX as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.4/0003:0499:3108.0002/input/input34 [ 3676.503844] hid-generic 0003:0499:3108.0002: input,hidraw1: USB HID v1.00 Device [YAMAHA Corp. YIT-W12TX] on usb-0000:00:1d.0-1.1/input4 [ 3676.671641] usb 2-1.1: 1:1: cannot get freq at ep 0x1 [ 3676.675786] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.676476] usbcore: registered new interface driver snd-usb-audio [ 3676.731911] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.735658] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.739399] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.743131] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.746920] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.750648] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.754445] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.758524] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.762274] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.789671] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.790049] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.790414] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.790773] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.791169] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.792134] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.792547] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.792899] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.793254] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.793634] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.794900] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.795255] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.795634] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.796008] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.796384] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.797543] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.797879] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.798254] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.798634] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.799007] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.813819] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.814281] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.814686] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.815281] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.815929] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.817807] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.818155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.818592] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.819165] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.819801] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.822163] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.822802] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.823284] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.824161] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.824907] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.827683] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.828159] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.828675] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.829415] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.830157] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.841801] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.842155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.842551] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.843158] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.843785] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.844909] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.845283] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.845673] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.846156] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.846800] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.848287] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.848799] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.849280] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.850031] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.850799] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.852677] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.853154] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.853674] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.854429] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.855155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.858916] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.859277] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.859672] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.860280] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.860909] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.862033] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.862418] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.862797] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.863279] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.863923] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.865471] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.866033] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.866590] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.867410] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.868157] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.870162] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.870674] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.871155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.871908] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.872676] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.900672] usb 2-1.1: USB disconnect, device number 5 [ 3676.900688] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
This is with kernel-5.9.13-200.fc33.x86_64 and alsa-lib-1.2.4-5.fc33.x86_64 on Fedora 33. Under Windows 10 the dongle works without any special drivers from Yamaha, everything appears to be downloaded by Windows automatically, so I was hoping the device could be made to work under Linux relatively easily.
Best regards, Julian
[1] https://europe.yamaha.com/en/products/audio_visual/accessories/yit-w12/downl... [2] https://europe.yamaha.com/en/products/audio_visual/sound_bar/ysp-4300/downlo...
Hello,
3 years later I am still hoping for getting the device working. I am on 6.5 kernel and Fedora 39. I am attaching Windows' driver details screenshot as well as the inf file used. Does USB audio driver under linux have any parameters I could try?
Best regards, Julian
Hi again,
turns out that getting the sound out was easier than expected:
options snd-usb-audio quirk_flags=0x1
One cosmetic issue remains: in pavucontrol I can see 3 configuration options: - Analog Stereo output - Digital Stereo (IEC958) output - Pro Audio The first and the third one work normally whereas digital stereo output very quiet audio only. By contrast, both my built-in audio cards (AMD Renoir HDMI and analog output) only have two options: - Play HiFi quality Music - Pro Audio Is this expected?
Best regards, Julian
On Sun, 26 Nov 2023 10:12:56 +0100, Julian Sikorski wrote:
Am 17.11.23 um 15:31 schrieb Julian Sikorski:
Am 13.12.2020 um 10:51 schrieb Julian Sikorski:
Hi list,
Yamaha YIT-W12TX is a USB dongle which allows to transmit audio from PC to the YSP-4300 sound bar [1][2]. While it is quite old and no longer sold, I recently tried to make it work under linux. Unfortunately, it did not work:
[ 3676.366404] usb 2-1.1: new full-speed USB device number 5 using ehci-pci [ 3676.445995] usb 2-1.1: config 1 has an invalid interface number: 4 but max is 3 [ 3676.446001] usb 2-1.1: config 1 has no interface number 2 [ 3676.446664] usb 2-1.1: New USB device found, idVendor=0499, idProduct=3108, bcdDevice= 1.00 [ 3676.446666] usb 2-1.1: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 3676.446679] usb 2-1.1: Product: YIT-W12TX [ 3676.446683] usb 2-1.1: Manufacturer: YAMAHA Corp. [ 3676.449508] hid-generic 0003:0499:3108.0001: hiddev96,hidraw0: USB HID v0.01 Device [YAMAHA Corp. YIT-W12TX] on usb-0000:00:1d.0-1.1/input3 [ 3676.450846] input: YAMAHA Corp. YIT-W12TX as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.4/0003:0499:3108.0002/input/input34 [ 3676.503844] hid-generic 0003:0499:3108.0002: input,hidraw1: USB HID v1.00 Device [YAMAHA Corp. YIT-W12TX] on usb-0000:00:1d.0-1.1/input4 [ 3676.671641] usb 2-1.1: 1:1: cannot get freq at ep 0x1 [ 3676.675786] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.676476] usbcore: registered new interface driver snd-usb-audio [ 3676.731911] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.735658] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.739399] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.743131] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.746920] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.750648] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.754445] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.758524] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.762274] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.789671] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.790049] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.790414] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.790773] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.791169] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.792134] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.792547] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.792899] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.793254] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.793634] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.794900] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.795255] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.795634] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.796008] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.796384] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.797543] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.797879] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.798254] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.798634] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.799007] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.813819] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.814281] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.814686] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.815281] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.815929] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.817807] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.818155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.818592] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.819165] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.819801] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.822163] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.822802] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.823284] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.824161] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.824907] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.827683] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.828159] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.828675] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.829415] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.830157] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.841801] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.842155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.842551] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.843158] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.843785] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.844909] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.845283] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.845673] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.846156] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.846800] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.848287] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.848799] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.849280] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.850031] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.850799] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.852677] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.853154] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.853674] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.854429] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.855155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.858916] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.859277] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.859672] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.860280] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.860909] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.862033] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.862418] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.862797] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.863279] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.863923] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.865471] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.866033] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.866590] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.867410] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.868157] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.870162] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.870674] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.871155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.871908] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.872676] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.900672] usb 2-1.1: USB disconnect, device number 5 [ 3676.900688] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
This is with kernel-5.9.13-200.fc33.x86_64 and alsa-lib-1.2.4-5.fc33.x86_64 on Fedora 33. Under Windows 10 the dongle works without any special drivers from Yamaha, everything appears to be downloaded by Windows automatically, so I was hoping the device could be made to work under Linux relatively easily.
Best regards, Julian
[1] https://europe.yamaha.com/en/products/audio_visual/accessories/yit-w12/downl... [2] https://europe.yamaha.com/en/products/audio_visual/sound_bar/ysp-4300/downlo...
Hello,
3 years later I am still hoping for getting the device working. I am on 6.5 kernel and Fedora 39. I am attaching Windows' driver details screenshot as well as the inf file used. Does USB audio driver under linux have any parameters I could try?
Best regards, Julian
Hi again,
turns out that getting the sound out was easier than expected:
options snd-usb-audio quirk_flags=0x1
And this alone helps to get the card working? Once after confirmation, we can add the quirk to the static table.
One cosmetic issue remains: in pavucontrol I can see 3 configuration options:
- Analog Stereo output
- Digital Stereo (IEC958) output
- Pro Audio
The first and the third one work normally whereas digital stereo output very quiet audio only. By contrast, both my built-in audio cards (AMD Renoir HDMI and analog output) only have two options:
- Play HiFi quality Music
- Pro Audio
Is this expected?
When the device provides multiple outputs, yes, it's a sort of default setup. Different boards may have different own UCM configs to override the default. Check each output and verify what actual I/O they correspond.
Takashi
Am 27.11.23 um 09:11 schrieb Takashi Iwai:
On Sun, 26 Nov 2023 10:12:56 +0100, Julian Sikorski wrote:
Am 17.11.23 um 15:31 schrieb Julian Sikorski:
Am 13.12.2020 um 10:51 schrieb Julian Sikorski:
Hi list,
Yamaha YIT-W12TX is a USB dongle which allows to transmit audio from PC to the YSP-4300 sound bar [1][2]. While it is quite old and no longer sold, I recently tried to make it work under linux. Unfortunately, it did not work:
[ 3676.366404] usb 2-1.1: new full-speed USB device number 5 using ehci-pci [ 3676.445995] usb 2-1.1: config 1 has an invalid interface number: 4 but max is 3 [ 3676.446001] usb 2-1.1: config 1 has no interface number 2 [ 3676.446664] usb 2-1.1: New USB device found, idVendor=0499, idProduct=3108, bcdDevice= 1.00 [ 3676.446666] usb 2-1.1: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 3676.446679] usb 2-1.1: Product: YIT-W12TX [ 3676.446683] usb 2-1.1: Manufacturer: YAMAHA Corp. [ 3676.449508] hid-generic 0003:0499:3108.0001: hiddev96,hidraw0: USB HID v0.01 Device [YAMAHA Corp. YIT-W12TX] on usb-0000:00:1d.0-1.1/input3 [ 3676.450846] input: YAMAHA Corp. YIT-W12TX as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.4/0003:0499:3108.0002/input/input34 [ 3676.503844] hid-generic 0003:0499:3108.0002: input,hidraw1: USB HID v1.00 Device [YAMAHA Corp. YIT-W12TX] on usb-0000:00:1d.0-1.1/input4 [ 3676.671641] usb 2-1.1: 1:1: cannot get freq at ep 0x1 [ 3676.675786] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.676476] usbcore: registered new interface driver snd-usb-audio [ 3676.731911] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.735658] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.739399] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.743131] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.746920] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.750648] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.754445] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.758524] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.762274] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.789671] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.790049] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.790414] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.790773] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.791169] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.792134] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.792547] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.792899] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.793254] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.793634] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.794900] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.795255] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.795634] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.796008] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.796384] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.797543] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.797879] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.798254] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.798634] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.799007] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.813819] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.814281] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.814686] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.815281] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.815929] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.817807] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.818155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.818592] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.819165] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.819801] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.822163] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.822802] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.823284] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.824161] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.824907] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.827683] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.828159] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.828675] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.829415] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.830157] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.841801] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.842155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.842551] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.843158] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.843785] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.844909] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.845283] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.845673] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.846156] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.846800] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.848287] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.848799] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.849280] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.850031] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.850799] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.852677] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.853154] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.853674] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.854429] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.855155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.858916] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.859277] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.859672] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.860280] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.860909] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.862033] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.862418] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.862797] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.863279] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.863923] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.865471] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.866033] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.866590] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.867410] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.868157] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.870162] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.870674] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.871155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.871908] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.872676] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.900672] usb 2-1.1: USB disconnect, device number 5 [ 3676.900688] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
This is with kernel-5.9.13-200.fc33.x86_64 and alsa-lib-1.2.4-5.fc33.x86_64 on Fedora 33. Under Windows 10 the dongle works without any special drivers from Yamaha, everything appears to be downloaded by Windows automatically, so I was hoping the device could be made to work under Linux relatively easily.
Best regards, Julian
[1] https://europe.yamaha.com/en/products/audio_visual/accessories/yit-w12/downl... [2] https://europe.yamaha.com/en/products/audio_visual/sound_bar/ysp-4300/downlo...
Hello,
3 years later I am still hoping for getting the device working. I am on 6.5 kernel and Fedora 39. I am attaching Windows' driver details screenshot as well as the inf file used. Does USB audio driver under linux have any parameters I could try?
Best regards, Julian
Hi again,
turns out that getting the sound out was easier than expected:
options snd-usb-audio quirk_flags=0x1
And this alone helps to get the card working? Once after confirmation, we can add the quirk to the static table.
Yes, no other changes were needed. I am on kernel 6.6.2 now. I have been listening to music via the dongle for several hours yesterday and today. Even s2idle is working.
One cosmetic issue remains: in pavucontrol I can see 3 configuration options:
- Analog Stereo output
- Digital Stereo (IEC958) output
- Pro Audio
The first and the third one work normally whereas digital stereo output very quiet audio only. By contrast, both my built-in audio cards (AMD Renoir HDMI and analog output) only have two options:
- Play HiFi quality Music
- Pro Audio
Is this expected?
When the device provides multiple outputs, yes, it's a sort of default setup. Different boards may have different own UCM configs to override the default. Check each output and verify what actual I/O they correspond.
Well, the dongle does not have any physical outputs. Input-wise, it can be connected to a PC via USB or to an old iPod/iPhone via the 30-pin dock connector. As far as output is concerned, the dongle connects wirelessly, via a proprietary AirWired protocol, to the Yamaha sound bar and its accompanying wireless subwoofer. Analog and pro output selection produce reasonably loud sound on the soundbar, in line with other inputs like FM radio, analog input or HDMI. Digital output, on the other hand, produces barely audible volume level. While it can be adjusted with the volume setting on the sound bar, the level needs to be so high that it would be unbearably loud for other inputs.
Takashi
Best regards, Julian
On Mon, 27 Nov 2023 10:15:05 +0100, Julian Sikorski wrote:
Am 27.11.23 um 09:11 schrieb Takashi Iwai:
On Sun, 26 Nov 2023 10:12:56 +0100, Julian Sikorski wrote:
Am 17.11.23 um 15:31 schrieb Julian Sikorski:
Am 13.12.2020 um 10:51 schrieb Julian Sikorski:
Hi list,
Yamaha YIT-W12TX is a USB dongle which allows to transmit audio from PC to the YSP-4300 sound bar [1][2]. While it is quite old and no longer sold, I recently tried to make it work under linux. Unfortunately, it did not work:
[ 3676.366404] usb 2-1.1: new full-speed USB device number 5 using ehci-pci [ 3676.445995] usb 2-1.1: config 1 has an invalid interface number: 4 but max is 3 [ 3676.446001] usb 2-1.1: config 1 has no interface number 2 [ 3676.446664] usb 2-1.1: New USB device found, idVendor=0499, idProduct=3108, bcdDevice= 1.00 [ 3676.446666] usb 2-1.1: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 3676.446679] usb 2-1.1: Product: YIT-W12TX [ 3676.446683] usb 2-1.1: Manufacturer: YAMAHA Corp. [ 3676.449508] hid-generic 0003:0499:3108.0001: hiddev96,hidraw0: USB HID v0.01 Device [YAMAHA Corp. YIT-W12TX] on usb-0000:00:1d.0-1.1/input3 [ 3676.450846] input: YAMAHA Corp. YIT-W12TX as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.4/0003:0499:3108.0002/input/input34 [ 3676.503844] hid-generic 0003:0499:3108.0002: input,hidraw1: USB HID v1.00 Device [YAMAHA Corp. YIT-W12TX] on usb-0000:00:1d.0-1.1/input4 [ 3676.671641] usb 2-1.1: 1:1: cannot get freq at ep 0x1 [ 3676.675786] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.676476] usbcore: registered new interface driver snd-usb-audio [ 3676.731911] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.735658] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.739399] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.743131] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.746920] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.750648] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.754445] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.758524] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.762274] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.789671] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.790049] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.790414] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.790773] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.791169] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.792134] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.792547] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.792899] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.793254] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.793634] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.794900] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.795255] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.795634] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.796008] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.796384] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.797543] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.797879] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.798254] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.798634] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.799007] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.813819] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.814281] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.814686] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.815281] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.815929] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.817807] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.818155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.818592] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.819165] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.819801] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.822163] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.822802] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.823284] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.824161] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.824907] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.827683] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.828159] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.828675] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.829415] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.830157] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.841801] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.842155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.842551] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.843158] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.843785] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.844909] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.845283] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.845673] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.846156] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.846800] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.848287] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.848799] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.849280] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.850031] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.850799] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.852677] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.853154] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.853674] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.854429] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.855155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.858916] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.859277] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.859672] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.860280] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.860909] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.862033] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.862418] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.862797] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.863279] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.863923] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.865471] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.866033] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.866590] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.867410] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.868157] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.870162] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.870674] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.871155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.871908] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.872676] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.900672] usb 2-1.1: USB disconnect, device number 5 [ 3676.900688] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
This is with kernel-5.9.13-200.fc33.x86_64 and alsa-lib-1.2.4-5.fc33.x86_64 on Fedora 33. Under Windows 10 the dongle works without any special drivers from Yamaha, everything appears to be downloaded by Windows automatically, so I was hoping the device could be made to work under Linux relatively easily.
Best regards, Julian
[1] https://europe.yamaha.com/en/products/audio_visual/accessories/yit-w12/downl... [2] https://europe.yamaha.com/en/products/audio_visual/sound_bar/ysp-4300/downlo...
Hello,
3 years later I am still hoping for getting the device working. I am on 6.5 kernel and Fedora 39. I am attaching Windows' driver details screenshot as well as the inf file used. Does USB audio driver under linux have any parameters I could try?
Best regards, Julian
Hi again,
turns out that getting the sound out was easier than expected:
options snd-usb-audio quirk_flags=0x1
And this alone helps to get the card working? Once after confirmation, we can add the quirk to the static table.
Yes, no other changes were needed. I am on kernel 6.6.2 now. I have been listening to music via the dongle for several hours yesterday and today. Even s2idle is working.
OK, then it's easy to apply the quirk.
One cosmetic issue remains: in pavucontrol I can see 3 configuration options:
- Analog Stereo output
- Digital Stereo (IEC958) output
- Pro Audio
The first and the third one work normally whereas digital stereo output very quiet audio only. By contrast, both my built-in audio cards (AMD Renoir HDMI and analog output) only have two options:
- Play HiFi quality Music
- Pro Audio
Is this expected?
When the device provides multiple outputs, yes, it's a sort of default setup. Different boards may have different own UCM configs to override the default. Check each output and verify what actual I/O they correspond.
Well, the dongle does not have any physical outputs. Input-wise, it can be connected to a PC via USB or to an old iPod/iPhone via the 30-pin dock connector. As far as output is concerned, the dongle connects wirelessly, via a proprietary AirWired protocol, to the Yamaha sound bar and its accompanying wireless subwoofer. Analog and pro output selection produce reasonably loud sound on the soundbar, in line with other inputs like FM radio, analog input or HDMI. Digital output, on the other hand, produces barely audible volume level. While it can be adjusted with the volume setting on the sound bar, the level needs to be so high that it would be unbearably loud for other inputs.
Could you give alsa-info.sh outputs? The device may have multiple I/O endpoints that end up with multiple PCM streams for som purpose.
thanks,
Takashi
Am 27.11.23 um 10:21 schrieb Takashi Iwai:
On Mon, 27 Nov 2023 10:15:05 +0100, Julian Sikorski wrote:
Am 27.11.23 um 09:11 schrieb Takashi Iwai:
On Sun, 26 Nov 2023 10:12:56 +0100, Julian Sikorski wrote:
Am 17.11.23 um 15:31 schrieb Julian Sikorski:
Am 13.12.2020 um 10:51 schrieb Julian Sikorski:
Hi list,
Yamaha YIT-W12TX is a USB dongle which allows to transmit audio from PC to the YSP-4300 sound bar [1][2]. While it is quite old and no longer sold, I recently tried to make it work under linux. Unfortunately, it did not work:
[ 3676.366404] usb 2-1.1: new full-speed USB device number 5 using ehci-pci [ 3676.445995] usb 2-1.1: config 1 has an invalid interface number: 4 but max is 3 [ 3676.446001] usb 2-1.1: config 1 has no interface number 2 [ 3676.446664] usb 2-1.1: New USB device found, idVendor=0499, idProduct=3108, bcdDevice= 1.00 [ 3676.446666] usb 2-1.1: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 3676.446679] usb 2-1.1: Product: YIT-W12TX [ 3676.446683] usb 2-1.1: Manufacturer: YAMAHA Corp. [ 3676.449508] hid-generic 0003:0499:3108.0001: hiddev96,hidraw0: USB HID v0.01 Device [YAMAHA Corp. YIT-W12TX] on usb-0000:00:1d.0-1.1/input3 [ 3676.450846] input: YAMAHA Corp. YIT-W12TX as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.4/0003:0499:3108.0002/input/input34 [ 3676.503844] hid-generic 0003:0499:3108.0002: input,hidraw1: USB HID v1.00 Device [YAMAHA Corp. YIT-W12TX] on usb-0000:00:1d.0-1.1/input4 [ 3676.671641] usb 2-1.1: 1:1: cannot get freq at ep 0x1 [ 3676.675786] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.676476] usbcore: registered new interface driver snd-usb-audio [ 3676.731911] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.735658] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.739399] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.743131] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.746920] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.750648] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.754445] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.758524] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.762274] usb 2-1.1: 5:0: cannot get min/max values for control 2 (id 5) [ 3676.789671] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.790049] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.790414] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.790773] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.791169] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.792134] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.792547] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.792899] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.793254] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.793634] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.794900] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.795255] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.795634] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.796008] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.796384] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.797543] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.797879] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.798254] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.798634] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.799007] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.813819] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.814281] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.814686] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.815281] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.815929] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.817807] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.818155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.818592] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.819165] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.819801] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.822163] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.822802] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.823284] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.824161] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.824907] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.827683] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.828159] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.828675] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.829415] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.830157] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.841801] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.842155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.842551] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.843158] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.843785] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.844909] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.845283] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.845673] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.846156] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.846800] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.848287] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.848799] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.849280] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.850031] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.850799] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.852677] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.853154] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.853674] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.854429] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.855155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.858916] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.859277] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.859672] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.860280] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.860909] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.862033] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.862418] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.862797] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.863279] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.863923] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.865471] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.866033] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.866590] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.867410] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.868157] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.870162] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.870674] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.871155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.871908] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.872676] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 [ 3676.900672] usb 2-1.1: USB disconnect, device number 5 [ 3676.900688] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1
This is with kernel-5.9.13-200.fc33.x86_64 and alsa-lib-1.2.4-5.fc33.x86_64 on Fedora 33. Under Windows 10 the dongle works without any special drivers from Yamaha, everything appears to be downloaded by Windows automatically, so I was hoping the device could be made to work under Linux relatively easily.
Best regards, Julian
[1] https://europe.yamaha.com/en/products/audio_visual/accessories/yit-w12/downl... [2] https://europe.yamaha.com/en/products/audio_visual/sound_bar/ysp-4300/downlo...
Hello,
3 years later I am still hoping for getting the device working. I am on 6.5 kernel and Fedora 39. I am attaching Windows' driver details screenshot as well as the inf file used. Does USB audio driver under linux have any parameters I could try?
Best regards, Julian
Hi again,
turns out that getting the sound out was easier than expected:
options snd-usb-audio quirk_flags=0x1
And this alone helps to get the card working? Once after confirmation, we can add the quirk to the static table.
Yes, no other changes were needed. I am on kernel 6.6.2 now. I have been listening to music via the dongle for several hours yesterday and today. Even s2idle is working.
OK, then it's easy to apply the quirk.
One cosmetic issue remains: in pavucontrol I can see 3 configuration options:
- Analog Stereo output
- Digital Stereo (IEC958) output
- Pro Audio
The first and the third one work normally whereas digital stereo output very quiet audio only. By contrast, both my built-in audio cards (AMD Renoir HDMI and analog output) only have two options:
- Play HiFi quality Music
- Pro Audio
Is this expected?
When the device provides multiple outputs, yes, it's a sort of default setup. Different boards may have different own UCM configs to override the default. Check each output and verify what actual I/O they correspond.
Well, the dongle does not have any physical outputs. Input-wise, it can be connected to a PC via USB or to an old iPod/iPhone via the 30-pin dock connector. As far as output is concerned, the dongle connects wirelessly, via a proprietary AirWired protocol, to the Yamaha sound bar and its accompanying wireless subwoofer. Analog and pro output selection produce reasonably loud sound on the soundbar, in line with other inputs like FM radio, analog input or HDMI. Digital output, on the other hand, produces barely audible volume level. While it can be adjusted with the volume setting on the sound bar, the level needs to be so high that it would be unbearably loud for other inputs.
Could you give alsa-info.sh outputs? The device may have multiple I/O endpoints that end up with multiple PCM streams for som purpose.
Sure: http://alsa-project.org/db/?f=f746a30850445f70e0879e273e5bcd87763014f9
thanks,
Takashi
On Mon, 27 Nov 2023 11:57:42 +0100, Julian Sikorski wrote:
Am 27.11.23 um 10:21 schrieb Takashi Iwai:
On Mon, 27 Nov 2023 10:15:05 +0100, Julian Sikorski wrote:
Am 27.11.23 um 09:11 schrieb Takashi Iwai:
On Sun, 26 Nov 2023 10:12:56 +0100, Julian Sikorski wrote:
Am 17.11.23 um 15:31 schrieb Julian Sikorski:
Am 13.12.2020 um 10:51 schrieb Julian Sikorski: > Hi list, > > Yamaha YIT-W12TX is a USB dongle which allows to transmit audio > from PC to the YSP-4300 sound bar [1][2]. While it is quite old and > no longer sold, I recently tried to make it work under > linux. Unfortunately, it did not work: > > [ 3676.366404] usb 2-1.1: new full-speed USB device number 5 using > ehci-pci > [ 3676.445995] usb 2-1.1: config 1 has an invalid interface number: > 4 but max is 3 > [ 3676.446001] usb 2-1.1: config 1 has no interface number 2 > [ 3676.446664] usb 2-1.1: New USB device found, idVendor=0499, > idProduct=3108, bcdDevice= 1.00 > [ 3676.446666] usb 2-1.1: New USB device strings: Mfr=2, Product=1, > SerialNumber=0 > [ 3676.446679] usb 2-1.1: Product: YIT-W12TX > [ 3676.446683] usb 2-1.1: Manufacturer: YAMAHA Corp. > [ 3676.449508] hid-generic 0003:0499:3108.0001: hiddev96,hidraw0: > USB HID v0.01 Device [YAMAHA Corp. YIT-W12TX] on > usb-0000:00:1d.0-1.1/input3 > [ 3676.450846] input: YAMAHA Corp. YIT-W12TX as > /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.4/0003:0499:3108.0002/input/input34 > [ 3676.503844] hid-generic 0003:0499:3108.0002: input,hidraw1: USB > HID v1.00 Device [YAMAHA Corp. YIT-W12TX] on > usb-0000:00:1d.0-1.1/input4 > [ 3676.671641] usb 2-1.1: 1:1: cannot get freq at ep 0x1 > [ 3676.675786] usb 2-1.1: 5:0: cannot get min/max values for > control 2 (id 5) > [ 3676.676476] usbcore: registered new interface driver snd-usb-audio > [ 3676.731911] usb 2-1.1: 5:0: cannot get min/max values for > control 2 (id 5) > [ 3676.735658] usb 2-1.1: 5:0: cannot get min/max values for > control 2 (id 5) > [ 3676.739399] usb 2-1.1: 5:0: cannot get min/max values for > control 2 (id 5) > [ 3676.743131] usb 2-1.1: 5:0: cannot get min/max values for > control 2 (id 5) > [ 3676.746920] usb 2-1.1: 5:0: cannot get min/max values for > control 2 (id 5) > [ 3676.750648] usb 2-1.1: 5:0: cannot get min/max values for > control 2 (id 5) > [ 3676.754445] usb 2-1.1: 5:0: cannot get min/max values for > control 2 (id 5) > [ 3676.758524] usb 2-1.1: 5:0: cannot get min/max values for > control 2 (id 5) > [ 3676.762274] usb 2-1.1: 5:0: cannot get min/max values for > control 2 (id 5) > [ 3676.789671] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.790049] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.790414] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.790773] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.791169] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.792134] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.792547] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.792899] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.793254] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.793634] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.794900] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.795255] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.795634] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.796008] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.796384] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.797543] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.797879] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.798254] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.798634] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.799007] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.813819] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.814281] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.814686] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.815281] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.815929] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.817807] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.818155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.818592] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.819165] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.819801] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.822163] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.822802] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.823284] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.824161] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.824907] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.827683] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.828159] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.828675] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.829415] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.830157] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.841801] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.842155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.842551] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.843158] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.843785] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.844909] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.845283] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.845673] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.846156] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.846800] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.848287] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.848799] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.849280] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.850031] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.850799] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.852677] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.853154] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.853674] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.854429] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.855155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.858916] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.859277] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.859672] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.860280] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.860909] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.862033] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.862418] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.862797] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.863279] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.863923] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.865471] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.866033] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.866590] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.867410] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.868157] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.870162] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.870674] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.871155] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.871908] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.872676] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > [ 3676.900672] usb 2-1.1: USB disconnect, device number 5 > [ 3676.900688] usb 2-1.1: 1:1: cannot set freq 44100 to ep 0x1 > > This is with kernel-5.9.13-200.fc33.x86_64 and > alsa-lib-1.2.4-5.fc33.x86_64 on Fedora 33. Under Windows 10 the > dongle works without any special drivers from Yamaha, everything > appears to be downloaded by Windows automatically, so I was hoping > the device could be made to work under Linux relatively easily. > > Best regards, > Julian > > [1] > https://europe.yamaha.com/en/products/audio_visual/accessories/yit-w12/downl... > [2] > https://europe.yamaha.com/en/products/audio_visual/sound_bar/ysp-4300/downlo...
Hello,
3 years later I am still hoping for getting the device working. I am on 6.5 kernel and Fedora 39. I am attaching Windows' driver details screenshot as well as the inf file used. Does USB audio driver under linux have any parameters I could try?
Best regards, Julian
Hi again,
turns out that getting the sound out was easier than expected:
options snd-usb-audio quirk_flags=0x1
And this alone helps to get the card working? Once after confirmation, we can add the quirk to the static table.
Yes, no other changes were needed. I am on kernel 6.6.2 now. I have been listening to music via the dongle for several hours yesterday and today. Even s2idle is working.
OK, then it's easy to apply the quirk.
One cosmetic issue remains: in pavucontrol I can see 3 configuration options:
- Analog Stereo output
- Digital Stereo (IEC958) output
- Pro Audio
The first and the third one work normally whereas digital stereo output very quiet audio only. By contrast, both my built-in audio cards (AMD Renoir HDMI and analog output) only have two options:
- Play HiFi quality Music
- Pro Audio
Is this expected?
When the device provides multiple outputs, yes, it's a sort of default setup. Different boards may have different own UCM configs to override the default. Check each output and verify what actual I/O they correspond.
Well, the dongle does not have any physical outputs. Input-wise, it can be connected to a PC via USB or to an old iPod/iPhone via the 30-pin dock connector. As far as output is concerned, the dongle connects wirelessly, via a proprietary AirWired protocol, to the Yamaha sound bar and its accompanying wireless subwoofer. Analog and pro output selection produce reasonably loud sound on the soundbar, in line with other inputs like FM radio, analog input or HDMI. Digital output, on the other hand, produces barely audible volume level. While it can be adjusted with the volume setting on the sound bar, the level needs to be so high that it would be unbearably loud for other inputs.
Could you give alsa-info.sh outputs? The device may have multiple I/O endpoints that end up with multiple PCM streams for som purpose.
Sure: http://alsa-project.org/db/?f=f746a30850445f70e0879e273e5bcd87763014f9
Thanks. So it has only one playback device, and certainly the SPDIF option is superfluous.
Does "aplay -L" show any iec958 option for the card? And, what does actually happen when you choose IEC958 on pipewire for this card?
Takashi
participants (2)
-
Julian Sikorski -
Takashi Iwai