Signed-off-by: Chris Rattray crattray@opensource.wolfsonmicro.com --- include/sound/wm2200.h | 22 +++++++++++++++++++++- sound/soc/codecs/wm2200.c | 31 +++++++++++++++++++++++++++++++ 2 files changed, 52 insertions(+), 1 deletions(-)

diff --git a/include/sound/wm2200.h b/include/sound/wm2200.h index 79bf55b..26ea6ae 100644 --- a/include/sound/wm2200.h +++ b/include/sound/wm2200.h @@ -12,6 +12,7 @@ #define __LINUX_SND_WM2200_H

#define WM2200_GPIO_SET 0x10000 +#define WM2200_MAX_MICBIAS 2

enum wm2200_in_mode { WM2200_IN_SE = 0, @@ -25,6 +26,24 @@ enum wm2200_dmic_sup { WM2200_DMIC_SUP_MICBIAS2 = 2, };

+enum wm2200_mbias_lvl { + WM2200_MBIAS_LVL_1V5 = 0, + WM2200_MBIAS_LVL_1V8 = 1, + WM2200_MBIAS_LVL_1V9 = 2, + WM2200_MBIAS_LVL_2V0 = 3, + WM2200_MBIAS_LVL_2V2 = 4, + WM2200_MBIAS_LVL_2V4 = 5, + WM2200_MBIAS_LVL_2V5 = 6, + WM2200_MBIAS_LVL_2V6 = 7, +}; + +struct wm2200_micbias { + enum wm2200_mbias_lvl mb_lvl; /** Regulated voltage */ + unsigned int discharge:1; /** Actively discharge */ + unsigned int fast_start:1; /** Enable aggressive startup ramp rate */ + unsigned int bypass:1; /** Use bypass mode */ +}; + struct wm2200_pdata { int reset; /** GPIO controlling /RESET, if any */ int ldo_ena; /** GPIO controlling LODENA, if any */ @@ -35,7 +54,8 @@ struct wm2200_pdata { enum wm2200_in_mode in_mode[3]; enum wm2200_dmic_sup dmic_sup[3];

- int micbias_cfg[2]; /** Register value to configure MICBIAS */ + /** MICBIAS configurations */ + struct wm2200_micbias micbias[WM2200_MAX_MICBIAS]; };

#endif diff --git a/sound/soc/codecs/wm2200.c b/sound/soc/codecs/wm2200.c index bdd3d80..e458252 100644 --- a/sound/soc/codecs/wm2200.c +++ b/sound/soc/codecs/wm2200.c @@ -2192,6 +2192,7 @@ static int wm2200_i2c_probe(struct i2c_client *i2c, struct wm2200_priv *wm2200; unsigned int reg; int ret, i; + int val;

wm2200 = devm_kzalloc(&i2c->dev, sizeof(struct wm2200_priv), GFP_KERNEL); @@ -2342,6 +2343,36 @@ static int wm2200_i2c_probe(struct i2c_client *i2c, regmap_write(wm2200->regmap, WM2200_AUDIO_IF_1_16 + i, i); }

+ for (i = 0; i < WM2200_MAX_MICBIAS; i++) { + if (!wm2200->pdata.micbias[i].mb_lvl && + !wm2200->pdata.micbias[i].bypass) + continue; + + /* Apply default for bypass mode */ + if (!wm2200->pdata.micbias[i].mb_lvl) + wm2200->pdata.micbias[i].mb_lvl + = WM2200_MBIAS_LVL_1V5; + + val = wm2200->pdata.micbias[i].mb_lvl + << WM2200_MICB1_LVL_SHIFT; + + if (wm2200->pdata.micbias[i].discharge) + val |= WM2200_MICB1_DISCH; + + if (wm2200->pdata.micbias[i].fast_start) + val |= WM2200_MICB1_RATE; + + if (wm2200->pdata.micbias[i].bypass) + val |= WM2200_MICB1_MODE; + + regmap_update_bits(wm2200->regmap, + WM2200_MIC_BIAS_CTRL_1 + i, + WM2200_MICB1_LVL_MASK | + WM2200_MICB1_DISCH | + WM2200_MICB1_MODE | + WM2200_MICB1_RATE, val); + } + for (i = 0; i < ARRAY_SIZE(wm2200->pdata.in_mode); i++) { regmap_update_bits(wm2200->regmap, wm2200_mic_ctrl_reg[i], WM2200_IN1_MODE_MASK |