[PATCH v2 1/2] ASoC: bindings: fsl-asoc-card: Add compatible string for MQS
Add compatible string "fsl,imx-audio-mqs" for MQS, and move "audio-routing" property to be optional for MQS doesn't need such property.
Signed-off-by: Shengjiu Wang shengjiu.wang@nxp.com --- changes in v2 - Move "audio-routing" to optional.
.../devicetree/bindings/sound/fsl-asoc-card.txt | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt index c60a5732d29c..ca9a3a43adfd 100644 --- a/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt +++ b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt @@ -34,6 +34,8 @@ The compatible list for this generic sound card currently:
"fsl,imx-audio-wm8960"
+ "fsl,imx-audio-mqs" + Required properties:
- compatible : Contains one of entries in the compatible list. @@ -44,6 +46,11 @@ Required properties:
- audio-codec : The phandle of an audio codec
+Optional properties: + + - audio-asrc : The phandle of ASRC. It can be absent if there's no + need to add ASRC support via DPCM. + - audio-routing : A list of the connections between audio components. Each entry is a pair of strings, the first being the connection's sink, the second being the connection's @@ -60,11 +67,6 @@ Required properties: coexisting in order to support the old bindings of wm8962 and sgtl5000.
-Optional properties: - - - audio-asrc : The phandle of ASRC. It can be absent if there's no - need to add ASRC support via DPCM. - Optional unless SSI is selected as a CPU DAI:
- mux-int-port : The internal port of the i.MX audio muxer (AUDMUX)
The MQS codec isn't an i2c device, so use of_find_device_by_node to get platform device pointer.
Because MQS only support playback, then add a new audio map.
And there maybe "model" property or no "audio-routing" property in devicetree, so add some enhancement for these two property.
Signed-off-by: Shengjiu Wang shengjiu.wang@nxp.com --- changes in v2 - update according Nicolin's comments.
sound/soc/fsl/fsl-asoc-card.c | 78 +++++++++++++++++++++++++---------- 1 file changed, 57 insertions(+), 21 deletions(-)
diff --git a/sound/soc/fsl/fsl-asoc-card.c b/sound/soc/fsl/fsl-asoc-card.c index 00be73900888..d0543a53764e 100644 --- a/sound/soc/fsl/fsl-asoc-card.c +++ b/sound/soc/fsl/fsl-asoc-card.c @@ -119,6 +119,13 @@ static const struct snd_soc_dapm_route audio_map_ac97[] = { {"ASRC-Capture", NULL, "AC97 Capture"}, };
+static const struct snd_soc_dapm_route audio_map_tx[] = { + /* 1st half -- Normal DAPM routes */ + {"Playback", NULL, "CPU-Playback"}, + /* 2nd half -- ASRC DAPM routes */ + {"CPU-Playback", NULL, "ASRC-Playback"}, +}; + /* Add all possible widgets into here without being redundant */ static const struct snd_soc_dapm_widget fsl_asoc_card_dapm_widgets[] = { SND_SOC_DAPM_LINE("Line Out Jack", NULL), @@ -485,8 +492,9 @@ static int fsl_asoc_card_probe(struct platform_device *pdev) struct platform_device *asrc_pdev = NULL; struct platform_device *cpu_pdev; struct fsl_asoc_card_priv *priv; - struct i2c_client *codec_dev; + struct device *codec_dev = NULL; const char *codec_dai_name; + const char *codec_dev_name; u32 width; int ret;
@@ -512,10 +520,23 @@ static int fsl_asoc_card_probe(struct platform_device *pdev) }
codec_np = of_parse_phandle(np, "audio-codec", 0); - if (codec_np) - codec_dev = of_find_i2c_device_by_node(codec_np); - else - codec_dev = NULL; + if (codec_np) { + struct platform_device *codec_pdev; + struct i2c_client *codec_i2c; + + codec_i2c = of_find_i2c_device_by_node(codec_np); + if (codec_i2c) { + codec_dev = &codec_i2c->dev; + codec_dev_name = codec_i2c->name; + } + if (!codec_dev) { + codec_pdev = of_find_device_by_node(codec_np); + if (codec_pdev) { + codec_dev = &codec_pdev->dev; + codec_dev_name = codec_pdev->name; + } + } + }
asrc_np = of_parse_phandle(np, "audio-asrc", 0); if (asrc_np) @@ -523,7 +544,7 @@ static int fsl_asoc_card_probe(struct platform_device *pdev)
/* Get the MCLK rate only, and leave it controlled by CODEC drivers */ if (codec_dev) { - struct clk *codec_clk = clk_get(&codec_dev->dev, NULL); + struct clk *codec_clk = clk_get(codec_dev, NULL);
if (!IS_ERR(codec_clk)) { priv->codec_priv.mclk_freq = clk_get_rate(codec_clk); @@ -538,6 +559,11 @@ static int fsl_asoc_card_probe(struct platform_device *pdev) /* Assign a default DAI format, and allow each card to overwrite it */ priv->dai_fmt = DAI_FMT_BASE;
+ memcpy(priv->dai_link, fsl_asoc_card_dai, + sizeof(struct snd_soc_dai_link) * ARRAY_SIZE(priv->dai_link)); + + priv->card.dapm_routes = audio_map; + priv->card.num_dapm_routes = ARRAY_SIZE(audio_map); /* Diversify the card configurations */ if (of_device_is_compatible(np, "fsl,imx-audio-cs42888")) { codec_dai_name = "cs42888"; @@ -573,6 +599,18 @@ static int fsl_asoc_card_probe(struct platform_device *pdev) codec_dai_name = "ac97-hifi"; priv->card.set_bias_level = NULL; priv->dai_fmt = SND_SOC_DAIFMT_AC97; + priv->card.dapm_routes = audio_map_ac97; + priv->card.num_dapm_routes = ARRAY_SIZE(audio_map_ac97); + } else if (of_device_is_compatible(np, "fsl,imx-audio-mqs")) { + codec_dai_name = "fsl-mqs-dai"; + priv->card.set_bias_level = NULL; + priv->dai_fmt = SND_SOC_DAIFMT_LEFT_J | + SND_SOC_DAIFMT_CBS_CFS | + SND_SOC_DAIFMT_NB_NF; + priv->dai_link[1].dpcm_capture = 0; + priv->dai_link[2].dpcm_capture = 0; + priv->card.dapm_routes = audio_map_tx; + priv->card.num_dapm_routes = ARRAY_SIZE(audio_map_tx); } else { dev_err(&pdev->dev, "unknown Device Tree compatible\n"); ret = -EINVAL; @@ -601,19 +639,17 @@ static int fsl_asoc_card_probe(struct platform_device *pdev) priv->cpu_priv.sysclk_id[0] = FSL_SAI_CLK_MAST1; }
- snprintf(priv->name, sizeof(priv->name), "%s-audio", - fsl_asoc_card_is_ac97(priv) ? "ac97" : - codec_dev->name); - /* Initialize sound card */ priv->pdev = pdev; priv->card.dev = &pdev->dev; - priv->card.name = priv->name; + ret = snd_soc_of_parse_card_name(&priv->card, "model"); + if (ret) { + snprintf(priv->name, sizeof(priv->name), "%s-audio", + fsl_asoc_card_is_ac97(priv) ? "ac97" : codec_dev_name); + priv->card.name = priv->name; + } priv->card.dai_link = priv->dai_link; - priv->card.dapm_routes = fsl_asoc_card_is_ac97(priv) ? - audio_map_ac97 : audio_map; priv->card.late_probe = fsl_asoc_card_late_probe; - priv->card.num_dapm_routes = ARRAY_SIZE(audio_map); priv->card.dapm_widgets = fsl_asoc_card_dapm_widgets; priv->card.num_dapm_widgets = ARRAY_SIZE(fsl_asoc_card_dapm_widgets);
@@ -621,13 +657,12 @@ static int fsl_asoc_card_probe(struct platform_device *pdev) if (!asrc_pdev) priv->card.num_dapm_routes /= 2;
- memcpy(priv->dai_link, fsl_asoc_card_dai, - sizeof(struct snd_soc_dai_link) * ARRAY_SIZE(priv->dai_link)); - - ret = snd_soc_of_parse_audio_routing(&priv->card, "audio-routing"); - if (ret) { - dev_err(&pdev->dev, "failed to parse audio-routing: %d\n", ret); - goto asrc_fail; + if (of_property_read_bool(np, "audio-routing")) { + ret = snd_soc_of_parse_audio_routing(&priv->card, "audio-routing"); + if (ret) { + dev_err(&pdev->dev, "failed to parse audio-routing: %d\n", ret); + goto asrc_fail; + } }
/* Normal DAI Link */ @@ -724,6 +759,7 @@ static const struct of_device_id fsl_asoc_card_dt_ids[] = { { .compatible = "fsl,imx-audio-sgtl5000", }, { .compatible = "fsl,imx-audio-wm8962", }, { .compatible = "fsl,imx-audio-wm8960", }, + { .compatible = "fsl,imx-audio-mqs", }, {} }; MODULE_DEVICE_TABLE(of, fsl_asoc_card_dt_ids);
On Wed, Jun 17, 2020 at 12:48:25PM +0800, Shengjiu Wang wrote:
The MQS codec isn't an i2c device, so use of_find_device_by_node to get platform device pointer.
Because MQS only support playback, then add a new audio map.
And there maybe "model" property or no "audio-routing" property in devicetree, so add some enhancement for these two property.
Signed-off-by: Shengjiu Wang shengjiu.wang@nxp.com
Reviewed-by: Nicolin Chen nicoleotsuka@gmail.com
On Wed, 17 Jun 2020 12:48:24 +0800, Shengjiu Wang wrote:
Add compatible string "fsl,imx-audio-mqs" for MQS, and move "audio-routing" property to be optional for MQS doesn't need such property.
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/2] ASoC: bindings: fsl-asoc-card: Add compatible string for MQS commit: 56d6663d41f982542097775a3a8a6a1b867fe608 [2/2] ASoC: fsl-asoc-card: Add MQS support commit: 039652a5b965404aee1fa8f61017f822668f41d4
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
participants (3)
-
Mark Brown
-
Nicolin Chen
-
Shengjiu Wang