On Thu, Apr 30, 2015 at 12:07:30PM +0800, Jun Nie wrote:

Add zx296702 SPDIF support

This is adding a new device with DT bindings but there is no bindings document. All new DT bindings must be documented.

--- /dev/null +++ b/include/sound/zx_hdmi_audio.h @@ -0,0 +1,7 @@ +#ifndef __ZX_HDMI_AUDIO_H__ +#define __ZX_HDMI_AUDIO_H__

+int zx_hdmi_audio_cfg(int audio_codec, int audio_way,

•       u32 sample_rate, u32 sample_len);
  

+void zx_hdmi_audio_en(int on); +#endif /* __ZX_HDMI_AUDIO_H__ */

So this isn't a S/PDIF controller but rather a HDMI controller and from the looks of it one with yet another custom interface between the video part and the audio part. As I keep saying I'd really like to see more code sharing between the various controllers doing this. Please take a look at some of the other controllers and see what can be shared, and also at this:

http://thread.gmane.org/gmane.comp.video.dri.devel/126588

series from Russell King.

+config ZX296702_SPDIF

•    bool "ZX296702 spdif"
  

• select ZX_PCM_DMA

•    help
  

•  Say Y or M if you want to add support for codecs attached to the
  

•  zx296702 spdif interface
  

The indentation above looks inconsistent - probably a mix of tabs and spaces.

+static struct snd_dmaengine_dai_dma_data zx_spdif_pcm_stereo_out = {

• .addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
• .chan_name = "tx",
• .maxburst = 8,

+};

The DMA driver said it needed custom channel names but this looks like the standard "tx" for transmit?

+static int zx_spdif_dai_probe(struct snd_soc_dai *dai) +{

• struct zx_spdif_info *zx_spdif = dev_get_drvdata(dai->dev);
• snd_soc_dai_set_drvdata(dai, zx_spdif);
• zx_spdif_pcm_stereo_out.addr = zx_spdif->mapbase + ZX_DATA;
• snd_soc_dai_init_dma_data(dai, &zx_spdif_pcm_stereo_out, NULL);
• return 0;

+}

This appears to be modifying a global variable rather than some driver data, please don't do that - store anything discovered per device at runtime in the driver datta.

+static void zx_spdif_chanstats(void __iomem *base, unsigned int rate) +{

• u32 cstas1;
• switch (rate) {
• case 22050:

• default:

• return;
  

• }

This should handle and report errrors, not ignore them.

• return -EINVAL;
  

• }
• if (2 == params_channels(params))

• val |= ZX_CTRL_DOUBLE_TRACK;
  

• else

• val |= ZX_CTRL_LEFT_TRACK;
  

• writel_relaxed(val, zx_spdif->reg_base + ZX_CTRL);

Missing blank line between this and the above block and please reverse the arguments for the == - it's the more normal kernel coding style.

+#if defined(CONFIG_ZX_HDMI_SND_SPDIF)

• sample_len = params_physical_width(params);
• zx_hdmi_audio_cfg(1, 0, params_rate(params), sample_len);

+#endif

But this is the S/PDIF dirver... in any case, this looks like something that depends on the hardware rather than something that should be a compile time option. We should be able to boot the same kernel on many systems.

• val = readl_relaxed(base + ZX_CTRL);
• val &= ~(ZX_CTRL_ENB_MASK | ZX_CTRL_TX_MASK);
• val |= on ? (ZX_CTRL_TX_OPEN | ZX_CTRL_ENB)

• : (ZX_CTRL_TX_CLOSE | ZX_CTRL_DNB);
  

• writel_relaxed(val, base + ZX_CTRL);

Please don't use the ternery operator like this, it does nothing for legibility.

• if (clk_prepare_enable(zx_spdif->dai_clk))

• return -EIO;
  

Don't discard return values, pass them back. You should probably also be managing this clock at runtime to save power.

• 			 &zx_spdif_dai, 1);
  

• if (ret) {

• dev_err(&pdev->dev, "Register DAI failed\n");
  

Print error codes as well.