[PATCH v2 1/2] ALSA: docs: Add Marian M2 driver documentation
Add documentation for the new MARIAN Seraph M2 sound card. It covers current development status, available controls of the card and information about the integrated loopback. Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com> --- V1 -> V2: - Remove redundant documentation fix from the next patch in the series Documentation/sound/cards/index.rst | 1 + Documentation/sound/cards/marian-m2.rst | 104 ++++++++++++++++++++++++ 2 files changed, 105 insertions(+) create mode 100644 Documentation/sound/cards/marian-m2.rst diff --git a/Documentation/sound/cards/index.rst b/Documentation/sound/cards/index.rst index e68bbb13c384..e873592d8d00 100644 --- a/Documentation/sound/cards/index.rst +++ b/Documentation/sound/cards/index.rst @@ -19,3 +19,4 @@ Card-Specific Information serial-u16550 img-spdif-in pcmtest + marian-m2 diff --git a/Documentation/sound/cards/marian-m2.rst b/Documentation/sound/cards/marian-m2.rst new file mode 100644 index 000000000000..bf12445e20d7 --- /dev/null +++ b/Documentation/sound/cards/marian-m2.rst @@ -0,0 +1,104 @@ +.. SPDX-License-Identifier: GPL-2.0 + +======================= +MARIAN Seraph M2 Driver +======================= + +Sep 18, 2023 + +Ivan Orlov <ivan.orlov0322@gmail.com> + +STATE OF DEVELOPMENT +==================== + +This driver is based on the driver written by Florian Faber in 2012, which seemed to work fine. +However, the initial code contained multiple issues, which had to be solved before sending the +driver upstream. + +The vendor lost the full documentation, so what we have here was recovered from drafts and found +after experiments with the card. + +What seems to be working fine: +- Playback and capture for all supported rates +- Integrated loopback (with some exceptions, see below) + +MEMORY MODEL +============ + +The hardware requires one huge contiguous DMA space to be allocated. After allocation, the bus address of +this buffer should be written to the hardware register. + +We can split this space into two parts: the first one contains samples for capture, another one contains +play samples: + +CAPTURE_CH_0, CAPTURE_CH_1, ..., CAPTURE_CH_127 | PLAY_CH_0, PLAY_CH_1, ..., PLAY_CH_127 + +The card supports the non-interleaved access mode only, so samples for each channel lay together: + +C0, C0, ..., C0, C1, C1, ..., C1, ..., C127 | C0, C0, ..., C0, C1, C1, ..., C1, ..., C127 + +The count of samples per each channel buffer needs to be set explicitly, so the address of the first +byte of the playback data depends on this value. The playback buffer starts where the capture buffer ends. +It makes the arbitrary period count/buffer size feature impossible to implement, and the driver supports only +2 periods per buffer. + +Controls +======== + +Input 1 Sync + 0 - No signal, 1 - valid MADI signal found, 2 - Synced with MADI signal +Input 2 Sync + 0 - No signal, 1 - valid MADI signal found, 2 - Synced with MADI signal + +Input 1 Channel Mode + 0 - 56 channels, 1 - 64 channels +Input 2 Channel Mode + 0 - 56 channels, 1 - 64 channels + +Input 1 Frame Mode + 0 - 48 kHz, 1 - 96 kHz +Input 2 Frame Mode + 0 - 48 kHz, 1 - 96 kHz + +Input 1 Frequency + Measured frequency on Input 1 +Input 2 Frequency + Measured frequency on Input 2 + +Output 1 Channel Mode + 0 - 56 channels, 1 - 64 channels +Output 2 Channel Mode + 0 - 56 channels, 1 - 64 channels + +Output 1 Frame Mode + 0 - 48 kHz, 1 - 96 kHz +Output 2 Frame Mode + 0 - 48 kHz, 1 - 96 kHz + +Clock Source + Internal/Sync Bus, Input Port 1, Input Port 2 + +Speed mode + VCO clock range (slow/fast) + +DCO Frequency (Hz) + +DCO Frequency (ms) + +DCO Detune + Range: -200...200 + +Loopback + Enable/Disable integrated loopback + + +Loopback +======== + +The card contains integrated loopback. When it is enabled, it sets the hardware’s DAW-in memory pointer +to the hardware’s DAW-out memory. So, what you play is what you record. + +You can enable the integrated loopback using the corresponding control. + +The loopback seems to work well on lower rates (like 28000). However, when the rate goes higher, I observe +multiple mistakes in recorded byte ordering. -- 2.34.1
The original driver was written by Florian Faber in 2012. This patch represents the updated version of the original driver. List of updates since the initial driver version: - Update deprecated API calls, so it could be sent upstream - Fix codestyle issues - Fix memory allocation issues - Add locking - Remove support for other models of Marian sound cards, which I was unable to test and which are not documented anywhere. Despite lacking of special equipment required for recording and playing MIDI/MADI, I was able to test the driver and fix some issues using the integrated and external loopbacks. Now the driver seems to work well. Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com> --- V1 -> V2: - Remove redundant documentation fix MAINTAINERS | 7 + sound/pci/Kconfig | 10 + sound/pci/Makefile | 2 + sound/pci/marianm2.c | 1785 ++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 1804 insertions(+) create mode 100644 sound/pci/marianm2.c diff --git a/MAINTAINERS b/MAINTAINERS index 90f13281d297..1e04a6c25a55 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -12621,6 +12621,13 @@ L: linux-mips@vger.kernel.org S: Maintained F: arch/mips/boot/dts/img/pistachio* +MARIAN SERAPH M2 SOUND CARD DRIVER +M: Ivan Orlov <ivan.orlov0322@gmail.com> +L: alsa-devel@alsa-project.org (moderated for non-subscribers) +S: Maintained +F: Documentation/sound/cards/marian-m2.rst +F: sound/pci/marianm2.c + MARVELL 88E6XXX ETHERNET SWITCH FABRIC DRIVER M: Andrew Lunn <andrew@lunn.ch> L: netdev@vger.kernel.org diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig index 787868c9e91b..e3dad79743e5 100644 --- a/sound/pci/Kconfig +++ b/sound/pci/Kconfig @@ -222,6 +222,16 @@ config SND_CMIPCI To compile this driver as a module, choose M here: the module will be called snd-cmipci. +config SND_MARIANM2 + tristate "MARIAN Seraph M2" + select SND_PCM + help + Say Y to include support for MARIAN Seraph M2 sound card + <file:Documentation/sound/cards/marian-m2.rst>. + + To compile this driver as a module, choose M here: the module + will be called snd-marianm2 + config SND_OXYGEN_LIB tristate diff --git a/sound/pci/Makefile b/sound/pci/Makefile index 04cac7469139..4d2f52c98a74 100644 --- a/sound/pci/Makefile +++ b/sound/pci/Makefile @@ -22,6 +22,7 @@ snd-fm801-objs := fm801.o snd-intel8x0-objs := intel8x0.o snd-intel8x0m-objs := intel8x0m.o snd-maestro3-objs := maestro3.o +snd-marianm2-objs := marianm2.o snd-rme32-objs := rme32.o snd-rme96-objs := rme96.o snd-sis7019-objs := sis7019.o @@ -48,6 +49,7 @@ obj-$(CONFIG_SND_FM801) += snd-fm801.o obj-$(CONFIG_SND_INTEL8X0) += snd-intel8x0.o obj-$(CONFIG_SND_INTEL8X0M) += snd-intel8x0m.o obj-$(CONFIG_SND_MAESTRO3) += snd-maestro3.o +obj-$(CONFIG_SND_MARIANM2) += snd-marianm2.o obj-$(CONFIG_SND_RME32) += snd-rme32.o obj-$(CONFIG_SND_RME96) += snd-rme96.o obj-$(CONFIG_SND_SIS7019) += snd-sis7019.o diff --git a/sound/pci/marianm2.c b/sound/pci/marianm2.c new file mode 100644 index 000000000000..1ffa47cded3f --- /dev/null +++ b/sound/pci/marianm2.c @@ -0,0 +1,1785 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * ALSA driver for MARIAN Seraph audio interfaces + * + * Copyright (c) 2012 Florian Faber <faberman@linuxproaudio.org>, + * 2023 Ivan Orlov <ivan.orlov0322@gmail.com> + */ + +#include <sound/core.h> +#include <sound/control.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/initval.h> +#include <sound/info.h> +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/interrupt.h> + +#define DEBUG + +#define M2_CHANNELS_COUNT 128 + +#define M2_FRAME_SIZE (M2_CHANNELS_COUNT * 4) +#define SUBSTREAM_PERIOD_SIZE (2048 * M2_FRAME_SIZE) +#define SUBSTREAM_BUF_SIZE (2 * SUBSTREAM_PERIOD_SIZE) + +#define SERAPH_RD_IRQ_STATUS 0x00 +#define SERAPH_RD_HWPOINTER 0x8C + +#define SERAPH_WR_DMA_ADR 0x04 +#define SERAPH_WR_ENABLE_CAPTURE 0x08 +#define SERAPH_WR_ENABLE_PLAYBACK 0x0C +#define SERAPH_WR_DMA_BLOCKS 0x10 + +#define M2_DISABLE_PLAY_IRQ BIT(1) +#define M2_DISABLE_CAPT_IRQ BIT(2) +#define M2_ENABLE_LOOPBACK BIT(3) +#define SERAPH_WR_DMA_ENABLE 0x84 +#define SERAPH_WR_IE_ENABLE 0xAC + +#define PCI_VENDOR_ID_MARIAN 0x1382 +#define PCI_DEVICE_ID_MARIAN_SERAPH_M2 0x5021 + +#define RATE_SLOW 54000 +#define RATE_FAST 108000 + +#define SPEEDMODE_SLOW 1 +#define SPEEDMODE_FAST 2 + +#define MARIAN_PORTS_TYPE_INPUT 0 +#define MARIAN_PORTS_TYPE_OUTPUT 1 + +#define MARIAN_SPI_CLOCK_DIVIDER 0x74 + +#define ERR_DEAD_WRITE BIT(0) +#define ERR_DEAD_READ BIT(1) +#define ERR_DATA_LOST BIT(2) +#define ERR_PAGE_CONF BIT(3) +#define ERR_INT_PLAY BIT(10) +#define ERR_INT_REC BIT(13) + +#define STATUS_ST_READY BIT(4) +#define STATUS_INT_PLAY BIT(8) +#define STATUS_INT_PPLAY BIT(9) +#define STATUS_INT_REC BIT(11) +#define STATUS_INT_PREC BIT(12) +#define STATUS_INT_PREP BIT(14) +#define WCLOCK_NEW_VAL BIT(31) +#define SPI_ALL_READY BIT(31) + +#define M2_CLOCK_SRC_CNT 4 +#define M2_CLOCK_SRC_DCO 1 +#define M2_CLOCK_SRC_SYNCBUS 2 +#define M2_CLOCK_SRC_MADI1 4 +#define M2_CLOCK_SRC_MADI2 5 + +#define M2_SYNC_STATE_CNT 3 +#define M2_CHNL_MODE_CNT 2 +#define M2_FRAME_MODE_CNT 2 + +#define M2_INP1_SYNC_CTL_ID 0 +#define M2_INP1_CM_CTL_ID 0 +#define M2_INP1_FM_CTL_ID 0 +#define M2_INP1_FREQ_CTL_ID 4 +#define M2_OUT1_CM_CTL_ID 0 +#define M2_OUT1_FM_CTL_ID 0 +#define M2_INP2_SYNC_CTL_ID 1 +#define M2_INP2_CM_CTL_ID 1 +#define M2_INP2_FM_CTL_ID 1 +#define M2_INP2_FREQ_CTL_ID 5 +#define M2_OUT2_CM_CTL_ID 1 +#define M2_OUT2_FM_CTL_ID 1 + +// MADI FPGA register 0x40 +// Use internal (=0) or external PLL (=1) +#define M2_PLL 2 + +// MADI FPGA register 0x41 +// Enable both MADI transmitters (=1) +#define M2_TX_ENABLE 0 +// Use int (=0) or 32bit IEEE float (=1) +#define M2_INT_FLOAT 4 +// Big endian (=0), little endian (=1) +#define M2_ENDIANNESS 5 +// MSB first (=0), LSB first (=1) +#define M2_BIT_ORDER 6 + +// MADI FPGA register 0x42 +// Send 56ch (=0) or 64ch (=1) MADI frames +#define M2_PORT1_MODE 0 +// Send 48kHz (=0) or 96kHz (=1) MADI frames +#define M2_PORT1_FRAME 1 +// Send 56ch (=0) or 64ch (=1) MADI frames +#define M2_PORT2_MODE 2 +// Send 48kHz (=0) or 96kHz (=1) MADI frames +#define M2_PORT2_FRAME 3 + +struct marian_card_descriptor; +struct marian_card; + +struct marian_card_descriptor { + char *name; + char *port_names; + unsigned int speedmode_max; + unsigned int ch_in; + unsigned int ch_out; + unsigned int midi_in; + unsigned int midi_out; + unsigned int serial_in; + unsigned int serial_out; + unsigned int wck_in; + unsigned int wck_out; + + unsigned int dma_bufsize; + + void (*hw_constraints_func)(struct marian_card *marian, + struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params); + /* custom function to set up ALSA controls */ + void (*create_controls)(struct marian_card *marian); + /* init is called after probing the card */ + int (*init_card)(struct marian_card *marian); + void (*free_card)(struct marian_card *marian); + /* prepare is called when ALSA is opening the card */ + void (*prepare)(struct marian_card *marian); + void (*set_speedmode)(struct marian_card *marian, unsigned int speedmode); + void (*proc_status)(struct marian_card *marian, struct snd_info_buffer *buffer); + void (*proc_ports)(struct marian_card *marian, struct snd_info_buffer *buffer, + unsigned int type); + + struct snd_pcm_hardware info_playback; + struct snd_pcm_hardware info_capture; +}; + +struct marian_card { + struct marian_card_descriptor *desc; + + struct snd_pcm_substream *playback_substream; + struct snd_pcm_substream *capture_substream; + + struct snd_card *card; + struct snd_pcm *pcm; + struct snd_dma_buffer dmabuf; + + struct snd_dma_buffer playback_buf; + struct snd_dma_buffer capture_buf; + + struct pci_dev *pci; + unsigned long port; + void __iomem *iobase; + int irq; + + unsigned int idx; + + /* hardware registers lock */ + spinlock_t reglock; + + /* spinlock for SPI communication */ + spinlock_t spi_lock; + + /* mutex for frequency measurement */ + struct mutex freq_mutex; + + /* Enables or disables hardware loopback */ + int loopback; + + unsigned int stream_open; + + /* speed mode: 1, 2, 4 times FS */ + unsigned int speedmode; + + /* 0..15, meaning depending on the card type */ + unsigned int clock_source; + + /* Frequency of the internal oscillator (Hertz) */ + unsigned int dco; + /* [0..1) part of the internal oscillator frequency (milli Hertz) */ + unsigned int dco_millis; + + /* [-200 .. 200] Two semitone 'musical' adjustment */ + int detune; + + /* WCK input termination on (1)/off (0) */ + unsigned int wck_term; + + /* WCK output source */ + unsigned int wck_output; + + void *card_specific; +}; + +enum CLOCK_SOURCE { + CLOCK_SRC_INTERNAL = 0, + CLOCK_SRC_SYNCBUS = 1, + CLOCK_SRC_INP1 = 2, + CLOCK_SRC_INP2 = 3, + CLOCK_SRC_INP3 = 4, +}; + +enum m2_num_mode { + M2_NUM_MODE_INT = 0, + M2_NUM_MODE_FLOAT = 1, +}; + +enum m2_endianness_mode { + M2_BE = 0, + M2_LE = 1, +}; + +struct m2_specific { + u8 shadow_40; + u8 shadow_41; + u8 shadow_42; + u8 frame; +}; + +static const struct pci_device_id snd_marian_ids[] = { + {PCI_DEVICE(PCI_VENDOR_ID_MARIAN, PCI_DEVICE_ID_MARIAN_SERAPH_M2), 0, 0, 6}, + { } +}; + +MODULE_DEVICE_TABLE(pci, snd_marian_ids); + +static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; // Index 0-MAX +static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; // ID for this card + +module_param_array(index, int, NULL, 0444); +MODULE_PARM_DESC(index, "Index value for MARIAN PCI soundcard"); +module_param_array(id, charp, NULL, 0444); +MODULE_PARM_DESC(id, "ID string for MARIAN PCI soundcard"); + +static void snd_marian_card_free(struct snd_card *card) +{ + struct marian_card *marian = card->private_data; + + if (!marian) + return; + + snd_dma_free_pages(&marian->dmabuf); + + if (marian->irq >= 0) + free_irq(marian->irq, (void *)marian); + + if (marian->iobase) + pci_iounmap(marian->pci, marian->iobase); + + if (marian->port) + pci_release_regions(marian->pci); + + pci_disable_device(marian->pci); +} + +static void marian_proc_status_generic(struct marian_card *marian, struct snd_info_buffer *buffer) +{ + snd_iprintf(buffer, "*** Card registers\n"); + snd_iprintf(buffer, "RD 0x064: %08x (SPI bits written)\n", readl(marian->iobase + 0x64)); + snd_iprintf(buffer, "RD 0x068: %08x (SPI bits read)\n", readl(marian->iobase + 0x68)); + snd_iprintf(buffer, "RD 0x070: %08x (SPI bits status)\n", readl(marian->iobase + 0x70)); + snd_iprintf(buffer, "RD 0x088: %08x (Super clock measurement)\n", + readl(marian->iobase + 0x88)); + snd_iprintf(buffer, "RD 0x08C: %08x (HW Pointer)\n", + readl(marian->iobase + SERAPH_RD_HWPOINTER)); + snd_iprintf(buffer, "RD 0x094: %08x (Word clock measurement)\n", + readl(marian->iobase + 0x88)); + snd_iprintf(buffer, "RD 0x0F8: %08x (Extension board)\n", + readl(marian->iobase + 0xF8)); + snd_iprintf(buffer, "RD 0x244: %08x (DMA debug)\n", + readl(marian->iobase + 0x244)); + + snd_iprintf(buffer, "\n*** Card status\n"); + snd_iprintf(buffer, "Firmware build: %08x\n", readl(marian->iobase + 0xFC)); + snd_iprintf(buffer, "Speed mode : %uFS (1..%u)\n", + marian->speedmode, marian->desc->speedmode_max); + snd_iprintf(buffer, "Clock master : %s\n", (marian->clock_source == 1) ? "yes" : "no"); + snd_iprintf(buffer, "DCO frequency: %d.%d Hz\n", marian->dco, marian->dco_millis); + snd_iprintf(buffer, "DCO detune : %d Cent\n", marian->detune); +} + +static void snd_marian_proc_status(struct snd_info_entry *entry, struct snd_info_buffer *buffer) +{ + struct marian_card *marian = entry->private_data; + + if (marian->desc->proc_status) + marian->desc->proc_status(marian, buffer); + else + marian_proc_status_generic(marian, buffer); +} + +/* + * Default port name function, outputs the static string + * port_names of the card descriptor regardless of current + * speed mode and whether input or output ports are requested. + */ +static void marian_proc_ports_generic(struct marian_card *marian, struct snd_info_buffer *buffer, + unsigned int type) +{ + snd_iprintf(buffer, marian->desc->port_names); +} + +static void snd_marian_proc_ports_in(struct snd_info_entry *entry, struct snd_info_buffer *buffer) +{ + struct marian_card *marian = entry->private_data; + + snd_iprintf(buffer, "# generated by MARIAN Seraph driver\n"); + if (marian->desc->proc_ports) + marian->desc->proc_ports(marian, buffer, MARIAN_PORTS_TYPE_INPUT); + else + marian_proc_ports_generic(marian, buffer, MARIAN_PORTS_TYPE_INPUT); +} + +static void snd_marian_proc_ports_out(struct snd_info_entry *entry, struct snd_info_buffer *buffer) +{ + struct marian_card *marian = entry->private_data; + + snd_iprintf(buffer, "# generated by MARIAN Seraph driver\n"); + if (marian->desc->proc_ports) + marian->desc->proc_ports(marian, buffer, MARIAN_PORTS_TYPE_OUTPUT); + else + marian_proc_ports_generic(marian, buffer, MARIAN_PORTS_TYPE_OUTPUT); +} + +static irqreturn_t snd_marian_interrupt(int irq, void *dev_id) +{ + struct marian_card *marian = (struct marian_card *)dev_id; + unsigned int irq_status; + + irq_status = readl(marian->iobase + SERAPH_RD_IRQ_STATUS); + + if (irq_status & 0x00004800) { + if (marian->playback_substream) + snd_pcm_period_elapsed(marian->playback_substream); + + if (marian->capture_substream) + snd_pcm_period_elapsed(marian->capture_substream); + + return IRQ_HANDLED; + } + + return IRQ_NONE; +} + +static int snd_marian_playback_open(struct snd_pcm_substream *substream) +{ + struct marian_card *marian = substream->private_data; + + substream->runtime->hw = marian->desc->info_playback; + + marian->playback_substream = substream; + + snd_pcm_set_sync(substream); + + return 0; +} + +static int snd_marian_capture_open(struct snd_pcm_substream *substream) +{ + struct marian_card *marian = substream->private_data; + + substream->runtime->hw = marian->desc->info_capture; + + marian->capture_substream = substream; + + snd_pcm_set_sync(substream); + + return 0; +} + +static int snd_marian_capture_release(struct snd_pcm_substream *substream) +{ + struct marian_card *marian = snd_pcm_substream_chip(substream); + + marian->capture_substream = NULL; + + return 0; +} + +static int snd_marian_playback_release(struct snd_pcm_substream *substream) +{ + struct marian_card *marian = snd_pcm_substream_chip(substream); + + marian->playback_substream = NULL; + + return 0; +} + +static void marian_generic_set_dco(struct marian_card *marian, unsigned int freq, + unsigned int millis) +{ + u64 val, v2; + s64 detune; + + val = (freq * 1000 + millis) * marian->speedmode; + val <<= 36; + + if (marian->detune != 0) { + /* + * DCO detune active + * this calculation takes a bit of a shortcut + * - should be implemented using a logarithmic scale + */ + detune = marian->detune * 100; + v2 = val; + div_u64(v2, 138564); + detune *= v2; + val += detune; + } + + val = div_u64(val, 80000000); + val = div_u64(val, 1000); + + writel((u32)val, marian->iobase + 0x88); + + marian->dco = freq; + marian->dco_millis = millis; +} + +static void marian_generic_set_speedmode(struct marian_card *marian, unsigned int speedmode) +{ + if (speedmode > marian->desc->speedmode_max) + return; + + switch (speedmode) { + case SPEEDMODE_SLOW: + writel(0x03, marian->iobase + 0x80); + writel(0x00, marian->iobase + 0x8C); // for 48kHz in 1FS mode + marian->speedmode = SPEEDMODE_SLOW; + break; + case SPEEDMODE_FAST: + writel(0x03, marian->iobase + 0x80); + writel(0x01, marian->iobase + 0x8C); // for 96kHz in 2FS mode + marian->speedmode = SPEEDMODE_FAST; + break; + } + + marian_generic_set_dco(marian, marian->dco, marian->dco_millis); +} + +static int snd_marian_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct marian_card *marian = snd_pcm_substream_chip(substream); + unsigned int speedmode; + int buffer_frames; + + buffer_frames = SUBSTREAM_BUF_SIZE / M2_FRAME_SIZE; + + if (params_rate(params) < RATE_SLOW) + speedmode = SPEEDMODE_SLOW; + else if (params_rate(params) < RATE_FAST) + speedmode = SPEEDMODE_FAST; + + if (speedmode > marian->desc->speedmode_max) { + dev_err(marian->card->dev, + "Requested rate (%u Hz) higher than card's maximum\n", + params_rate(params)); + _snd_pcm_hw_param_setempty(params, SNDRV_PCM_HW_PARAM_RATE); + return -EBUSY; + } + + spin_lock(&marian->reglock); + if (marian->desc->set_speedmode) + marian->desc->set_speedmode(marian, speedmode); + else + marian_generic_set_speedmode(marian, speedmode); + + marian->detune = 0; + + marian_generic_set_dco(marian, params_rate(params), 0); + spin_unlock(&marian->reglock); + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + snd_pcm_set_runtime_buffer(substream, &marian->playback_buf); + else + snd_pcm_set_runtime_buffer(substream, &marian->capture_buf); + + // apply optional card specific hw constraints + if (marian->desc->hw_constraints_func) + marian->desc->hw_constraints_func(marian, substream, params); + + return 0; +} + +static int snd_marian_prepare(struct snd_pcm_substream *substream) +{ + struct marian_card *marian = snd_pcm_substream_chip(substream); + + if (marian->desc->prepare) + marian->desc->prepare(marian); + + return 0; +} + +static void marian_silence(struct marian_card *marian) +{ + memset(marian->dmabuf.area, 0, marian->dmabuf.bytes); +} + +// atomic by default, no need for locking here +static int snd_marian_trigger(struct snd_pcm_substream *substream, int cmd) +{ + struct marian_card *marian = snd_pcm_substream_chip(substream); + int irq_flags; + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + irq_flags = M2_DISABLE_PLAY_IRQ; + if (marian->loopback) + irq_flags |= M2_ENABLE_LOOPBACK; + + marian_silence(marian); + writel(0x3, marian->iobase + SERAPH_WR_DMA_ENABLE); + writel(irq_flags, marian->iobase + SERAPH_WR_IE_ENABLE); + break; + case SNDRV_PCM_TRIGGER_STOP: + irq_flags = M2_DISABLE_PLAY_IRQ | M2_DISABLE_CAPT_IRQ; + writel(irq_flags, marian->iobase + SERAPH_WR_IE_ENABLE); + writel(0x0, marian->iobase + SERAPH_WR_DMA_ENABLE); + marian_silence(marian); + + // unarm channels to inhibit playback from the FPGA's internal buffer + writel(0, marian->iobase + 0x08); + writel(0, marian->iobase + 0x0C); + writel(0, marian->iobase + 0x20); + writel(0, marian->iobase + 0x24); + writel(0, marian->iobase + 0x28); + writel(0, marian->iobase + 0x2C); + writel(0, marian->iobase + 0x30); + writel(0, marian->iobase + 0x34); + writel(0, marian->iobase + 0x38); + writel(0, marian->iobase + 0x3C); + break; + default: + return -EINVAL; + } + + return 0; +} + +static snd_pcm_uframes_t snd_marian_hw_pointer(struct snd_pcm_substream *substream) +{ + struct marian_card *marian = snd_pcm_substream_chip(substream); + + return readl(marian->iobase + SERAPH_RD_HWPOINTER); +} + +static int snd_marian_mmap(struct snd_pcm_substream *substream, struct vm_area_struct *vma) +{ + struct marian_card *marian = snd_pcm_substream_chip(substream); + + if (remap_pfn_range(vma, vma->vm_start, substream->runtime->dma_addr >> PAGE_SHIFT, + vma->vm_end - vma->vm_start, vma->vm_page_prot) < 0) { + dev_err(marian->card->dev, "remap_pfn_range failed\n"); + return -EIO; + } + + return 0; +} + +static const struct snd_pcm_ops snd_marian_playback_ops = { + .open = snd_marian_playback_open, + .close = snd_marian_playback_release, + .hw_params = snd_marian_hw_params, + .prepare = snd_marian_prepare, + .trigger = snd_marian_trigger, + .pointer = snd_marian_hw_pointer, + .mmap = snd_marian_mmap, +}; + +static const struct snd_pcm_ops snd_marian_capture_ops = { + .open = snd_marian_capture_open, + .close = snd_marian_capture_release, + .hw_params = snd_marian_hw_params, + .prepare = snd_marian_prepare, + .trigger = snd_marian_trigger, + .pointer = snd_marian_hw_pointer, + .mmap = snd_marian_mmap, +}; + +static void marian_generic_set_clock_source(struct marian_card *marian, u8 source) +{ + spin_lock(&marian->reglock); + writel(source, marian->iobase + 0x90); + marian->clock_source = source; + spin_unlock(&marian->reglock); +} + +static void marian_generic_init(struct marian_card *marian) +{ + if (!marian->desc->set_speedmode) + marian->desc->set_speedmode = marian_generic_set_speedmode; + + // reset DMA engine + writel(0x00000000, marian->iobase); + + // disable play interrupt + writel(M2_DISABLE_PLAY_IRQ, marian->iobase + SERAPH_WR_IE_ENABLE); + + // init clock mode + marian_generic_set_speedmode(marian, SPEEDMODE_SLOW); + + // init internal clock and set it as clock source + marian_generic_set_clock_source(marian, 1); + + // init SPI clock divider + writel(0x1F, marian->iobase + MARIAN_SPI_CLOCK_DIVIDER); +} + +static void construct_playback_buffer(struct marian_card *marian) +{ + marian->playback_buf = marian->dmabuf; + marian->playback_buf.area += SUBSTREAM_BUF_SIZE; + marian->playback_buf.addr += SUBSTREAM_BUF_SIZE; + marian->playback_buf.bytes = SUBSTREAM_BUF_SIZE; +} + +static void construct_capture_buffer(struct marian_card *marian) +{ + marian->capture_buf = marian->dmabuf; + marian->capture_buf.bytes = SUBSTREAM_BUF_SIZE; +} + +static int snd_marian_create(struct snd_card *card, struct pci_dev *pci, + struct marian_card_descriptor *desc, unsigned int idx) +{ + struct snd_info_entry *entry; + struct marian_card *marian = card->private_data; + int err; + unsigned int len; + + marian->desc = desc; + marian->card = card; + marian->pcm = NULL; + marian->pci = pci; + marian->port = 0; + marian->iobase = NULL; + marian->irq = -1; + marian->idx = idx; + spin_lock_init(&marian->reglock); + spin_lock_init(&marian->spi_lock); + mutex_init(&marian->freq_mutex); + + err = pci_enable_device(pci); + if (err < 0) + return err; + + if (dma_set_mask_and_coherent(&pci->dev, DMA_BIT_MASK(32))) { + dev_err(&pci->dev, "Unable to set DMA mask\n"); + return err; + } + + pci_set_master(pci); + + err = pci_request_regions(pci, "marian"); + if (err < 0) + return err; + + marian->port = pci_resource_start(pci, 0); + len = pci_resource_len(pci, 0); + marian->iobase = pci_iomap(pci, 0, 0); + if (!marian->iobase) { + dev_err(&pci->dev, "unable to grab region 0x%lx-0x%lx\n", + marian->port, marian->port + len - 1); + return -EBUSY; + } + + if (request_irq(pci->irq, snd_marian_interrupt, IRQF_SHARED, "marian", marian)) { + dev_err(&pci->dev, "unable to grab IRQ %d\n", pci->irq); + return -EBUSY; + } + marian->irq = pci->irq; + + card->private_free = snd_marian_card_free; + + strscpy(card->driver, "MARIAN FPGA", sizeof(card->driver)); + strscpy(card->shortname, marian->desc->name, sizeof(card->shortname)); + sprintf(card->longname, "%s PCIe audio at 0x%lx, irq %d", + card->shortname, marian->port, marian->irq); + + snd_card_set_dev(card, &pci->dev); + + err = snd_pcm_new(card, desc->name, 0, 1, 1, &marian->pcm); + if (err < 0) + return err; + marian->pcm->private_data = marian; + snd_pcm_set_ops(marian->pcm, SNDRV_PCM_STREAM_PLAYBACK, &snd_marian_playback_ops); + snd_pcm_set_ops(marian->pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_marian_capture_ops); + + len = PAGE_ALIGN(desc->dma_bufsize); + err = snd_dma_alloc_pages(SNDRV_DMA_TYPE_CONTINUOUS, &pci->dev, + desc->dma_bufsize, &marian->dmabuf); + if (err < 0) { + dev_err(card->dev, "Could not allocate %d Bytes (%d)\n", len, err); + + snd_dma_free_pages(&marian->dmabuf); + return err; + } + + writel((u32)marian->dmabuf.addr, + marian->iobase + SERAPH_WR_DMA_ADR); + + // Set 'block' count to buffer_frames/16 to set channel 'buffers' count (16 samples each) + writel(SUBSTREAM_BUF_SIZE / M2_FRAME_SIZE / 16, marian->iobase + SERAPH_WR_DMA_BLOCKS); + + construct_capture_buffer(marian); + construct_playback_buffer(marian); + + if (!snd_card_proc_new(card, "status", &entry)) + snd_info_set_text_ops(entry, marian, snd_marian_proc_status); + if (!snd_card_proc_new(card, "ports.in", &entry)) + snd_info_set_text_ops(entry, marian, snd_marian_proc_ports_in); + if (!snd_card_proc_new(card, "ports.out", &entry)) + snd_info_set_text_ops(entry, marian, snd_marian_proc_ports_out); + + if (marian->desc->init_card) + marian->desc->init_card(marian); + else + marian_generic_init(marian); + + if (marian->desc->create_controls) + marian->desc->create_controls(marian); + + return snd_card_register(card); +} + +/* + * Measure the frequency of a clock source. + * The measurement is triggered and the FPGA's ready + * signal polled (normally takes up to 2ms). The measurement + * has only a certainty of 10-20Hz, this function rounds it up + * to the nearest 10Hz step (in 1FS). + */ +static unsigned int marian_measure_freq(struct marian_card *marian, unsigned int source) +{ + mutex_lock(&marian->freq_mutex); + u32 val; + int tries = 5; + + writel(source & 0x7, marian->iobase + 0xC8); + + while (tries > 0) { + val = readl(marian->iobase + 0x94); + if (val & WCLOCK_NEW_VAL) + break; + + usleep_range(1000, 1200); + tries--; + } + + mutex_unlock(&marian->freq_mutex); + + if (tries > 0) + return (((1280000000 / ((val & 0x3FFFF) + 1)) + 5 * marian->speedmode) + / (10 * marian->speedmode)) * 10 * marian->speedmode; + + return 0; +} + +static int marian_generic_frequency_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 1; + uinfo->value.integer.min = 27000; + uinfo->value.integer.max = 207000; + uinfo->value.integer.step = 1; + return 0; +} + +static int marian_generic_frequency_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct marian_card *marian = snd_kcontrol_chip(kcontrol); + + ucontrol->value.integer.value[0] = marian_measure_freq(marian, kcontrol->private_value); + return 0; +} + +static int marian_generic_frequency_create(struct marian_card *marian, char *label, u32 idx) +{ + struct snd_kcontrol_new c = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = label, + .private_value = idx, + .access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE, + .info = marian_generic_frequency_info, + .get = marian_generic_frequency_get + }; + + return snd_ctl_add(marian->card, snd_ctl_new1(&c, marian)); +} + +static int marian_generic_dco_int_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + struct marian_card *marian = snd_kcontrol_chip(kcontrol); + + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 1; + if (marian->speedmode == SPEEDMODE_SLOW) { + uinfo->value.integer.min = 32000; + uinfo->value.integer.max = 54000; + } + uinfo->value.integer.step = 1; + return 0; +} + +static int marian_generic_dco_int_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct marian_card *marian = snd_kcontrol_chip(kcontrol); + + ucontrol->value.integer.value[0] = marian->dco; + + return 0; +} + +static int marian_generic_dco_int_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct marian_card *marian = snd_kcontrol_chip(kcontrol); + + spin_lock(&marian->reglock); + marian_generic_set_dco(marian, ucontrol->value.integer.value[0], marian->dco_millis); + spin_unlock(&marian->reglock); + + return 0; +} + +static int marian_generic_dco_int_create(struct marian_card *marian, char *label) +{ + struct snd_kcontrol_new c = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = label, + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_VOLATILE, + .info = marian_generic_dco_int_info, + .get = marian_generic_dco_int_get, + .put = marian_generic_dco_int_put + }; + + return snd_ctl_add(marian->card, snd_ctl_new1(&c, marian)); +} + +static int marian_generic_dco_millis_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = 999; + uinfo->value.integer.step = 1; + + return 0; +} + +static int marian_generic_dco_millis_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct marian_card *marian = snd_kcontrol_chip(kcontrol); + + ucontrol->value.integer.value[0] = marian->dco_millis; + + return 0; +} + +static int marian_generic_dco_millis_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct marian_card *marian = snd_kcontrol_chip(kcontrol); + + spin_lock(&marian->reglock); + marian_generic_set_dco(marian, marian->dco, ucontrol->value.integer.value[0]); + spin_unlock(&marian->reglock); + + return 0; +} + +static int marian_generic_dco_millis_create(struct marian_card *marian, char *label) +{ + struct snd_kcontrol_new c = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = label, + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_VOLATILE, + .info = marian_generic_dco_millis_info, + .get = marian_generic_dco_millis_get, + .put = marian_generic_dco_millis_put + }; + + return snd_ctl_add(marian->card, snd_ctl_new1(&c, marian)); +} + +static int marian_generic_dco_detune_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 1; + uinfo->value.integer.min = -200; + uinfo->value.integer.max = 200; + uinfo->value.integer.step = 1; + return 0; +} + +static int marian_generic_dco_detune_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct marian_card *marian = snd_kcontrol_chip(kcontrol); + + ucontrol->value.integer.value[0] = marian->detune; + + return 0; +} + +static int marian_generic_dco_detune_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct marian_card *marian = snd_kcontrol_chip(kcontrol); + + spin_lock(&marian->reglock); + marian->detune = ucontrol->value.integer.value[0]; + + marian_generic_set_dco(marian, marian->dco, marian->dco_millis); + spin_unlock(&marian->reglock); + + return 0; +} + +static int marian_generic_dco_detune_create(struct marian_card *marian, char *label) +{ + struct snd_kcontrol_new c = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = label, + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_VOLATILE, + .info = marian_generic_dco_detune_info, + .get = marian_generic_dco_detune_get, + .put = marian_generic_dco_detune_put + }; + + return snd_ctl_add(marian->card, snd_ctl_new1(&c, marian)); +} + +static int marian_control_pcm_loopback_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = 1; + + return 0; +} + +static int marian_control_pcm_loopback_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct marian_card *marian = snd_kcontrol_chip(kcontrol); + + ucontrol->value.integer.value[0] = marian->loopback; + + return 0; +} + +static int marian_control_pcm_loopback_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct marian_card *marian = snd_kcontrol_chip(kcontrol); + + marian->loopback = ucontrol->value.integer.value[0]; + + return 0; +} +static int marian_control_pcm_loopback_create(struct marian_card *marian) +{ + struct snd_kcontrol_new c = { + .iface = SNDRV_CTL_ELEM_IFACE_PCM, + .name = "Loopback", + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, + .info = marian_control_pcm_loopback_info, + .get = marian_control_pcm_loopback_get, + .put = marian_control_pcm_loopback_put, + }; + + return snd_ctl_add(marian->card, snd_ctl_new1(&c, marian)); +} + +static void marian_generic_dco_create(struct marian_card *marian) +{ + marian_generic_dco_int_create(marian, "DCO Freq (Hz)"); + marian_generic_dco_millis_create(marian, "DCO Freq (millis)"); + marian_generic_dco_detune_create(marian, "DCO Detune (cent)"); +} + +static int marian_generic_speedmode_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + struct marian_card *marian = snd_kcontrol_chip(kcontrol); + static const char * const texts[] = { "1FS", "2FS", "4FS" }; + + uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; + uinfo->count = 1; + switch (marian->desc->speedmode_max) { + case SPEEDMODE_SLOW: + uinfo->value.enumerated.items = 1; + break; + case SPEEDMODE_FAST: + uinfo->value.enumerated.items = 2; + break; + } + if (uinfo->value.enumerated.item >= uinfo->value.enumerated.items) + uinfo->value.enumerated.item = uinfo->value.enumerated.items - 1; + strscpy(uinfo->value.enumerated.name, texts[uinfo->value.enumerated.item], + sizeof(uinfo->value.enumerated.name)); + return 0; +} + +static int marian_generic_speedmode_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct marian_card *marian = snd_kcontrol_chip(kcontrol); + + ucontrol->value.enumerated.item[0] = marian->speedmode - 1; + + return 0; +} + +static int marian_generic_speedmode_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct marian_card *marian = snd_kcontrol_chip(kcontrol); + + spin_lock(&marian->reglock); + marian->desc->set_speedmode(marian, ucontrol->value.enumerated.item[0] + 1); + spin_unlock(&marian->reglock); + + return 0; +} + +static int marian_generic_speedmode_create(struct marian_card *marian) +{ + struct snd_kcontrol_new c = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Speed Mode", + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_VOLATILE, + .info = marian_generic_speedmode_info, + .get = marian_generic_speedmode_get, + .put = marian_generic_speedmode_put, + }; + + return snd_ctl_add(marian->card, snd_ctl_new1(&c, marian)); +} + +static int spi_wait_for_ar(struct marian_card *marian) +{ + int tries = 10; + + while (tries > 0) { + if (readl(marian->iobase + 0x70) == SPI_ALL_READY) + break; + udelay(100); + tries--; + } + if (tries == 0) + return -EIO; + return 0; +} + +static int marian_spi_transfer(struct marian_card *marian, uint16_t cs, uint16_t bits_write, + u8 *data_write, uint16_t bits_read, u8 *data_read) +{ + u32 buf = 0; + unsigned int i; + int err = 0; + + spin_lock(&marian->spi_lock); + + if (spi_wait_for_ar(marian) < 0) + writel(0x1234, marian->iobase + 0x70); // Resetting SPI bus + + writel(cs, marian->iobase + 0x60); // chip select register + writel(bits_write, marian->iobase + 0x64); // number of bits to write + writel(bits_read, marian->iobase + 0x68); // number of bits to read + + if (bits_write <= 32) { + if (bits_write <= 8) + buf = data_write[0] << (32 - bits_write); + else if (bits_write <= 16) + buf = data_write[0] << 24 | data_write[1] << (32 - bits_write); + + writel(buf, marian->iobase + 0x6C); // write data left aligned + } + if (bits_read > 0 && bits_read <= 32) { + if (spi_wait_for_ar(marian) < 0) { + dev_dbg(marian->card->dev, + "Bus didn't signal AR\n"); + err = -EIO; + goto unlock_exit; + } + + buf = readl(marian->iobase + MARIAN_SPI_CLOCK_DIVIDER); + + buf <<= 32 - bits_read; + i = 0; + + while (bits_read > 0) { + data_read[i++] = (buf >> 24) & 0xFF; + buf <<= 8; + bits_read -= 8; + } + } + +unlock_exit: + spin_unlock(&marian->spi_lock); + return err; +} + +static u8 marian_m2_spi_read(struct marian_card *marian, u8 adr) +{ + u8 buf_in; + + adr = adr & 0x7F; + + if (marian_spi_transfer(marian, 0x02, 8, &adr, 8, &buf_in) == 0) + return buf_in; + + return 0; +} + +static int marian_m2_spi_write(struct marian_card *marian, u8 adr, u8 val) +{ + u8 buf_out[2]; + + buf_out[0] = 0x80 | adr; + buf_out[1] = val; + + return marian_spi_transfer(marian, 0x02, 16, (u8 *)&buf_out, 0, NULL); +} + +static int marian_m2_sync_state_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) +{ + static const char * const texts[] = { "No Signal", "Lock", "Sync" }; + + return snd_ctl_enum_info(uinfo, 1, ARRAY_SIZE(texts), texts); +} + +static int marian_m2_sync_state_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct marian_card *marian = snd_kcontrol_chip(kcontrol); + u8 v = marian_m2_spi_read(marian, 0x00); + + v = (v >> (kcontrol->private_value * 2)) & 0x3; + if (v == 3) + v--; + + ucontrol->value.enumerated.item[0] = v; + + return 0; +} + +static int marian_m2_sync_state_create(struct marian_card *marian, char *label, u32 idx) +{ + struct snd_kcontrol_new c = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = label, + .private_value = idx, + .access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE, + .info = marian_m2_sync_state_info, + .get = marian_m2_sync_state_get + }; + + return snd_ctl_add(marian->card, snd_ctl_new1(&c, marian)); +} + +static int marian_m2_channel_mode_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + static const char * const texts[] = { "56ch", "64ch" }; + + return snd_ctl_enum_info(uinfo, 1, ARRAY_SIZE(texts), texts); +} + +static int marian_m2_input_channel_mode_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct marian_card *marian = snd_kcontrol_chip(kcontrol); + u8 v = marian_m2_spi_read(marian, 0x01); + + v = (v >> (kcontrol->private_value * 2)) & 0x1; + ucontrol->value.enumerated.item[0] = v; + + return 0; +} + +static int marian_m2_input_channel_mode_create(struct marian_card *marian, + char *label, u32 idx) +{ + struct snd_kcontrol_new c = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = label, + .private_value = idx, + .access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE, + .info = marian_m2_channel_mode_info, + .get = marian_m2_input_channel_mode_get + }; + + return snd_ctl_add(marian->card, snd_ctl_new1(&c, marian)); +} + +static int marian_m2_frame_mode_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) +{ + static const char * const texts[] = { "48kHz", "96kHz" }; + + return snd_ctl_enum_info(uinfo, 1, ARRAY_SIZE(texts), texts); +} + +static int marian_m2_input_frame_mode_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct marian_card *marian = snd_kcontrol_chip(kcontrol); + u8 v = marian_m2_spi_read(marian, 0x01); + + v = (v >> ((kcontrol->private_value * 2) + 1)) & 0x1; + ucontrol->value.enumerated.item[0] = v; + + return 0; +} + +static int marian_m2_input_frame_mode_create(struct marian_card *marian, char *label, u32 idx) +{ + struct snd_kcontrol_new c = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = label, + .private_value = idx, + .access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE, + .info = marian_m2_frame_mode_info, + .get = marian_m2_input_frame_mode_get + }; + + return snd_ctl_add(marian->card, snd_ctl_new1(&c, marian)); +} + +static u8 marian_m2_get_port_mode(struct marian_card *marian, unsigned int port) +{ + struct m2_specific *spec = marian->card_specific; + + if (port) + return (spec->shadow_42 >> M2_PORT2_MODE) & 1; + else + return (spec->shadow_42 >> M2_PORT1_MODE) & 1; +} + +static int marian_m2_output_channel_mode_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct marian_card *marian = snd_kcontrol_chip(kcontrol); + + ucontrol->value.enumerated.item[0] = marian_m2_get_port_mode(marian, + kcontrol->private_value); + + return 0; +} + +static void marian_m2_set_port_mode(struct marian_card *marian, unsigned int port, u8 state) +{ + struct m2_specific *spec = (struct m2_specific *)marian->card_specific; + + if (port) + spec->shadow_42 = (spec->shadow_42 & ~(1 << M2_PORT2_MODE)) + | state << M2_PORT2_MODE; + else + spec->shadow_42 = (spec->shadow_42 & ~(1 << M2_PORT1_MODE)) + | state << M2_PORT1_MODE; + + marian_m2_spi_write(marian, 0x42, spec->shadow_42); +} + +static int marian_m2_output_channel_mode_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct marian_card *marian = snd_kcontrol_chip(kcontrol); + + spin_lock(&marian->reglock); + marian_m2_set_port_mode(marian, kcontrol->private_value, + ucontrol->value.enumerated.item[0]); + spin_unlock(&marian->reglock); + + return 0; +} + +static int marian_m2_output_channel_mode_create(struct marian_card *marian, + char *label, u32 idx) +{ + struct snd_kcontrol_new c = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = label, + .private_value = idx, + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_VOLATILE, + .info = marian_m2_channel_mode_info, + .get = marian_m2_output_channel_mode_get, + .put = marian_m2_output_channel_mode_put + }; + + return snd_ctl_add(marian->card, snd_ctl_new1(&c, marian)); +} + +static int marian_m2_output_frame_mode_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + return snd_ctl_boolean_mono_info(kcontrol, uinfo); +} + +static int marian_m2_output_frame_mode_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct marian_card *marian = snd_kcontrol_chip(kcontrol); + struct m2_specific *spec = (struct m2_specific *)marian->card_specific; + + ucontrol->value.enumerated.item[0] = (spec->frame >> kcontrol->private_value) & 1; + + return 0; +} + +static void marian_m2_write_port_frame(struct marian_card *marian) +{ + struct m2_specific *spec = (struct m2_specific *)marian->card_specific; + + spec->shadow_42 = spec->shadow_42 & ~((1 << M2_PORT1_FRAME) | (1 << M2_PORT2_FRAME)); + + if (marian->speedmode == 2) { + // If we are in FS2, set 96kHz mode where enabled + if (spec->frame & 1) + spec->shadow_42 |= 1 << M2_PORT1_FRAME; + if (spec->frame & 2) + spec->shadow_42 |= 1 << M2_PORT2_FRAME; + } + + marian_m2_spi_write(marian, 0x42, spec->shadow_42); +} + +static void marian_m2_set_port_frame(struct marian_card *marian, unsigned int port, u8 state) +{ + struct m2_specific *spec = (struct m2_specific *)marian->card_specific; + + spec->frame = (spec->frame & ~(1 << port)) | (state << port); + + marian_m2_write_port_frame(marian); +} + +static int marian_m2_output_frame_mode_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct marian_card *marian = snd_kcontrol_chip(kcontrol); + + spin_lock(&marian->reglock); + marian_m2_set_port_frame(marian, kcontrol->private_value, + ucontrol->value.enumerated.item[0]); + spin_unlock(&marian->reglock); + + return 0; +} + +static int marian_m2_output_frame_mode_create(struct marian_card *marian, char *label, u32 idx) +{ + struct snd_kcontrol_new c = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = label, + .private_value = idx, + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_VOLATILE, + .info = marian_m2_output_frame_mode_info, + .get = marian_m2_output_frame_mode_get, + .put = marian_m2_output_frame_mode_put, + }; + + return snd_ctl_add(marian->card, snd_ctl_new1(&c, marian)); +} + +static int marian_m2_clock_source_info(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + static const char * const texts[] = {"Internal", "Sync Bus", + "Input Port 1", "Input Port 2"}; + + return snd_ctl_enum_info(uinfo, 1, ARRAY_SIZE(texts), texts); +} + +static int marian_m2_clock_source_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct marian_card *marian = snd_kcontrol_chip(kcontrol); + + switch (marian->clock_source) { + case M2_CLOCK_SRC_DCO: + ucontrol->value.enumerated.item[0] = CLOCK_SRC_INTERNAL; + break; + case M2_CLOCK_SRC_SYNCBUS: + ucontrol->value.enumerated.item[0] = CLOCK_SRC_SYNCBUS; + break; + case M2_CLOCK_SRC_MADI1: + ucontrol->value.enumerated.item[0] = CLOCK_SRC_INP1; + break; + case M2_CLOCK_SRC_MADI2: + ucontrol->value.enumerated.item[0] = CLOCK_SRC_INP2; + break; + default: + dev_dbg(marian->card->dev, + "Illegal value for clock_source! (%d)\n", + marian->clock_source); + return -EINVAL; + } + + return 0; +} + +static int marian_m2_clock_source_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct marian_card *marian = snd_kcontrol_chip(kcontrol); + + switch (ucontrol->value.enumerated.item[0]) { + case CLOCK_SRC_INTERNAL: + marian_generic_set_clock_source(marian, M2_CLOCK_SRC_DCO); + break; + case CLOCK_SRC_SYNCBUS: + marian_generic_set_clock_source(marian, M2_CLOCK_SRC_SYNCBUS); + break; + case CLOCK_SRC_INP1: + marian_generic_set_clock_source(marian, M2_CLOCK_SRC_MADI1); + break; + case CLOCK_SRC_INP2: + marian_generic_set_clock_source(marian, M2_CLOCK_SRC_MADI2); + break; + } + + return 0; +} + +static int marian_m2_clock_source_create(struct marian_card *marian) +{ + struct snd_kcontrol_new c = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "Clock Source", + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_VOLATILE, + .info = marian_m2_clock_source_info, + .get = marian_m2_clock_source_get, + .put = marian_m2_clock_source_put, + }; + + return snd_ctl_add(marian->card, snd_ctl_new1(&c, marian)); +} + +/* + * Controls: + * + * RO: + * - Input 1 sync state (no signal, lock, sync) + * - Input 1 channel mode (56/64ch) + * - Input 1 frame mode (48/96kHz) + * - Input 1 frequency + * - Input 2 sync state (no signal, lock, sync) + * - Input 2 channel mode (56/64ch) + * - Input 2 frame mode (48/96kHz) + * - Input 2 frequency + * + * RW: + * - Output 1 channel mode (56/64ch) + * - Output 1 frame mode (48/96kHz) + * - Output 2 channel mode (56/64ch) + * - Output 2 frame mode (48/96kHz) + * - Word clock source (Port 1, Port 2, Internal, Sync port, WCK input) + * - Speed mode (1, 2, 4FS) + * - DCO frequency (1 Hertz) + * - DCO frequency (1/1000th) + */ +static void marian_m2_create_controls(struct marian_card *marian) +{ + marian_m2_sync_state_create(marian, "Input 1 Sync", M2_INP1_SYNC_CTL_ID); + marian_m2_sync_state_create(marian, "Input 2 Sync", M2_INP2_SYNC_CTL_ID); + marian_m2_input_channel_mode_create(marian, "Input 1 Channel Mode", + M2_INP1_CM_CTL_ID); + marian_m2_input_channel_mode_create(marian, "Input 2 Channel Mode", + M2_INP2_CM_CTL_ID); + marian_m2_input_frame_mode_create(marian, "Input 1 Frame Mode", + M2_INP1_FM_CTL_ID); + marian_m2_input_frame_mode_create(marian, "Input 2 Frame Mode", + M2_INP2_FM_CTL_ID); + marian_generic_frequency_create(marian, "Input 1 Frequency", + M2_INP1_FREQ_CTL_ID); + marian_generic_frequency_create(marian, "Input 2 Frequency", + M2_INP2_FREQ_CTL_ID); + marian_m2_output_channel_mode_create(marian, "Output 1 Channel Mode", + M2_OUT1_CM_CTL_ID); + marian_m2_output_channel_mode_create(marian, "Output 2 Channel Mode", + M2_OUT2_CM_CTL_ID); + marian_m2_output_frame_mode_create(marian, "Output 1 96kHz Frame", + M2_OUT1_FM_CTL_ID); + marian_m2_output_frame_mode_create(marian, "Output 2 96kHz Frame", + M2_OUT2_FM_CTL_ID); + marian_m2_clock_source_create(marian); + marian_generic_speedmode_create(marian); + marian_generic_dco_create(marian); + marian_control_pcm_loopback_create(marian); +} + +static void marian_m2_set_float(struct marian_card *marian, enum m2_num_mode state) +{ + struct m2_specific *spec = (struct m2_specific *)marian->card_specific; + + spec->shadow_41 = (spec->shadow_41 & ~(1 << M2_INT_FLOAT)) | state << M2_INT_FLOAT; + marian_m2_spi_write(marian, 0x41, spec->shadow_41); +} + +static void marian_m2_set_endianness(struct marian_card *marian, enum m2_endianness_mode state) +{ + struct m2_specific *spec = (struct m2_specific *)marian->card_specific; + + spec->shadow_41 = (spec->shadow_41 & ~(1 << M2_ENDIANNESS)) | state << M2_ENDIANNESS; + marian_m2_spi_write(marian, 0x41, spec->shadow_41); +} + +static void marian_m2_set_speedmode(struct marian_card *marian, unsigned int speedmode) +{ + marian_generic_set_speedmode(marian, speedmode); + marian_m2_write_port_frame(marian); +} + +static int marian_m2_init(struct marian_card *marian) +{ + struct m2_specific *spec; + + marian_generic_init(marian); + spec = kzalloc(sizeof(*spec), GFP_KERNEL); + if (!spec) { + dev_dbg(marian->card->dev, + "Cannot allocate card specific structure\n"); + return -ENOMEM; + } + + spec->shadow_40 = 0x00; + spec->shadow_41 = (1 << M2_TX_ENABLE); + spec->shadow_42 = (1 << M2_PORT1_MODE) | (1 << M2_PORT2_MODE); + + marian_m2_spi_write(marian, 0x40, spec->shadow_40); + marian_m2_spi_write(marian, 0x41, spec->shadow_41); + marian_m2_spi_write(marian, 0x42, spec->shadow_42); + + marian->card_specific = spec; + return 0; +} + +static void marian_m2_free(struct marian_card *marian) +{ + kfree(marian->card_specific); +} + +static void marian_m2_prepare(struct marian_card *marian) +{ + u32 mask = 0xFFFFFFFF; + + spin_lock(&marian->reglock); + writel(mask, marian->iobase + 0x20); + writel(mask, marian->iobase + 0x24); + writel(mask, marian->iobase + 0x28); + writel(mask, marian->iobase + 0x2C); + writel(mask, marian->iobase + 0x30); + writel(mask, marian->iobase + 0x34); + writel(mask, marian->iobase + 0x38); + writel(mask, marian->iobase + 0x3C); + spin_unlock(&marian->reglock); +} + +static void marian_m2_proc_status(struct marian_card *marian, struct snd_info_buffer *buffer) +{ + struct m2_specific *spec = (struct m2_specific *)marian->card_specific; + u8 v1, v2; + + marian_proc_status_generic(marian, buffer); + + snd_iprintf(buffer, "\n*** MADI FPGA registers\n"); + snd_iprintf(buffer, "M2 MADI 00h: %02x\n", marian_m2_spi_read(marian, 0x00)); + snd_iprintf(buffer, "M2 MADI 01h: %02x\n", marian_m2_spi_read(marian, 0x01)); + snd_iprintf(buffer, "M2 MADI 02h: %02x\n", marian_m2_spi_read(marian, 0x02)); + snd_iprintf(buffer, "M2 MADI 40h: %02x\n", spec->shadow_40); + snd_iprintf(buffer, "M2 MADI 41h: %02x\n", spec->shadow_41); + snd_iprintf(buffer, "M2 MADI 42h: %02x\n", spec->shadow_42); + + snd_iprintf(buffer, "\n*** MADI FPGA status\n"); + snd_iprintf(buffer, "MADI FPGA firmware: 0x%02x\n", marian_m2_spi_read(marian, 0x02)); + + snd_iprintf(buffer, "Clock source: "); + switch (marian->clock_source) { + case 1: + snd_iprintf(buffer, "Internal DCO\n"); + break; + case 2: + snd_iprintf(buffer, "Sync bus\n"); + break; + case 4: + snd_iprintf(buffer, "MADI Input 1\n"); + break; + case 5: + snd_iprintf(buffer, "MADI Input 2\n"); + break; + default: + snd_iprintf(buffer, "UNKNOWN\n"); + break; + } + + snd_iprintf(buffer, "Sample format: %s, %s Endian, %s first\n", + (spec->shadow_41 & (1 << M2_INT_FLOAT)) ? "Float" : "Integer", + (spec->shadow_41 & (1 << M2_ENDIANNESS)) ? "Little" : "Big", + (spec->shadow_41 & (1 << M2_BIT_ORDER)) ? "LSB" : "MSB"); + + v1 = marian_m2_spi_read(marian, 0x00); + v2 = marian_m2_spi_read(marian, 0x01); + + snd_iprintf(buffer, "MADI port 1 input: "); + if (!(v1 & 0x03)) + snd_iprintf(buffer, "No signal\n"); + else + snd_iprintf(buffer, "%s, %dch, %dkHz frame, %u Hz\n", + (v1 & 0x02) ? "sync" : "lock", (v2 & 0x01) ? 64 : 56, + (v2 & 0x02) ? 96 : 48, marian_measure_freq(marian, 4)); + + snd_iprintf(buffer, "MADI port 2 input: "); + if (!(v1 & 0x0C)) + snd_iprintf(buffer, "No signal\n"); + else + snd_iprintf(buffer, "%s, %dch, %dkHz frame, %u Hz\n", + (v1 & 0x08) ? "sync" : "lock", + (v2 & 0x04) ? 64 : 56, (v2 & 0x08) ? 96 : 48, + marian_measure_freq(marian, 5)); +} + +static void marian_m2_proc_ports(struct marian_card *marian, + struct snd_info_buffer *buffer, unsigned int type) +{ + int i; + + for (i = 0; i < M2_CHANNELS_COUNT; i++) + snd_iprintf(buffer, "%d=MADI p%dch%02d\n", i + 1, i / 64 + 1, i % 64 + 1); +} + +static void marian_m2_constraints(struct marian_card *marian, struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + spin_lock(&marian->reglock); + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_FLOAT_BE: + marian_m2_set_float(marian, M2_NUM_MODE_FLOAT); + marian_m2_set_endianness(marian, M2_BE); + break; + case SNDRV_PCM_FORMAT_FLOAT_LE: + marian_m2_set_float(marian, M2_NUM_MODE_FLOAT); + marian_m2_set_endianness(marian, M2_LE); + break; + case SNDRV_PCM_FORMAT_S32_BE: + marian_m2_set_float(marian, M2_NUM_MODE_INT); + marian_m2_set_endianness(marian, M2_BE); + break; + case SNDRV_PCM_FORMAT_S32_LE: + marian_m2_set_float(marian, M2_NUM_MODE_INT); + marian_m2_set_endianness(marian, M2_LE); + break; + } + spin_unlock(&marian->reglock); +} + +static struct marian_card_descriptor descriptor = { + .name = "Seraph M2", + .speedmode_max = 2, + .ch_in = M2_CHANNELS_COUNT, + .ch_out = M2_CHANNELS_COUNT, + .dma_bufsize = 2 * SUBSTREAM_BUF_SIZE, + .hw_constraints_func = marian_m2_constraints, + .create_controls = marian_m2_create_controls, + .init_card = marian_m2_init, + .free_card = marian_m2_free, + .prepare = marian_m2_prepare, + .set_speedmode = marian_m2_set_speedmode, + .proc_status = marian_m2_proc_status, + .proc_ports = marian_m2_proc_ports, + .info_playback = { + .info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_NONINTERLEAVED + | SNDRV_PCM_INFO_JOINT_DUPLEX | SNDRV_PCM_INFO_SYNC_START, + .formats = SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S32_BE + | SNDRV_PCM_FMTBIT_FLOAT_LE | SNDRV_PCM_FMTBIT_FLOAT_BE, + .rates = (SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_44100 + | SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 + | SNDRV_PCM_RATE_96000), + .rate_min = 28000, + .rate_max = RATE_FAST, + .channels_min = M2_CHANNELS_COUNT, + .channels_max = M2_CHANNELS_COUNT, + .buffer_bytes_max = SUBSTREAM_BUF_SIZE, + .period_bytes_min = SUBSTREAM_PERIOD_SIZE, + .period_bytes_max = SUBSTREAM_PERIOD_SIZE, + .periods_min = 2, + .periods_max = 2 + }, + .info_capture = { + .info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_NONINTERLEAVED + | SNDRV_PCM_INFO_SYNC_START | SNDRV_PCM_INFO_JOINT_DUPLEX, + .formats = SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S32_BE + | SNDRV_PCM_FMTBIT_FLOAT_LE | SNDRV_PCM_FMTBIT_FLOAT_BE, + .rates = (SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_44100 + | SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 + | SNDRV_PCM_RATE_96000), + .rate_min = 28000, + .rate_max = RATE_FAST, + .channels_min = M2_CHANNELS_COUNT, + .channels_max = M2_CHANNELS_COUNT, + .buffer_bytes_max = SUBSTREAM_BUF_SIZE, + .period_bytes_min = SUBSTREAM_PERIOD_SIZE, + .period_bytes_max = SUBSTREAM_PERIOD_SIZE, + .periods_min = 2, + .periods_max = 2 + } +}; + +static int snd_marian_m2_probe(struct pci_dev *pci, const struct pci_device_id *pci_id) +{ + static unsigned int dev; + struct snd_card *card; + int err; + + if (dev >= SNDRV_CARDS) + return -ENODEV; + + err = snd_card_new(&pci->dev, index[dev], id[dev], + THIS_MODULE, sizeof(struct marian_card), &card); + if (err < 0) + return err; + + err = snd_marian_create(card, pci, &descriptor, dev); + if (err < 0) { + snd_card_free(card); + return err; + } + + pci_set_drvdata(pci, card); + + dev++; + + return 0; +} + +static void snd_marian_m2_remove(struct pci_dev *pci) +{ + snd_card_free(pci_get_drvdata(pci)); + pci_set_drvdata(pci, NULL); +} + +static struct pci_driver marian_driver = { + .name = "MARIAN", + .id_table = snd_marian_ids, + .probe = snd_marian_m2_probe, + .remove = snd_marian_m2_remove, +}; + +module_pci_driver(marian_driver); + +MODULE_AUTHOR("Florin Faber <faberman@linuxproaudio.org>"); +MODULE_DESCRIPTION("MARIAN Seraph series"); +MODULE_LICENSE("GPL"); -- 2.34.1
Hi Ivan, kernel test robot noticed the following build warnings: [auto build test WARNING on tiwai-sound/for-next] [also build test WARNING on tiwai-sound/for-linus linus/master v6.6-rc2 next-20230918] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in https://git-scm.com/docs/git-format-patch#_base_tree_information] url: https://github.com/intel-lab-lkp/linux/commits/Ivan-Orlov/ALSA-Add-new-drive... base: https://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git for-next patch link: https://lore.kernel.org/r/20230918181044.7257-2-ivan.orlov0322%40gmail.com patch subject: [PATCH v2 2/2] ALSA: Add new driver for Marian M2 sound card config: sparc-allmodconfig (https://download.01.org/0day-ci/archive/20230919/202309191140.FdOk1qDx-lkp@i...) compiler: sparc64-linux-gcc (GCC) 13.2.0 reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20230919/202309191140.FdOk1qDx-lkp@i...) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp@intel.com> | Closes: https://lore.kernel.org/oe-kbuild-all/202309191140.FdOk1qDx-lkp@intel.com/ All warnings (new ones prefixed by >>): sound/pci/marianm2.c: In function 'snd_marian_hw_params':
sound/pci/marianm2.c:466:13: warning: variable 'buffer_frames' set but not used [-Wunused-but-set-variable] 466 | int buffer_frames; | ^~~~~~~~~~~~~
vim +/buffer_frames +466 sound/pci/marianm2.c 460 461 static int snd_marian_hw_params(struct snd_pcm_substream *substream, 462 struct snd_pcm_hw_params *params) 463 { 464 struct marian_card *marian = snd_pcm_substream_chip(substream); 465 unsigned int speedmode;
466 int buffer_frames; 467 468 buffer_frames = SUBSTREAM_BUF_SIZE / M2_FRAME_SIZE; 469 470 if (params_rate(params) < RATE_SLOW) 471 speedmode = SPEEDMODE_SLOW; 472 else if (params_rate(params) < RATE_FAST) 473 speedmode = SPEEDMODE_FAST; 474 475 if (speedmode > marian->desc->speedmode_max) { 476 dev_err(marian->card->dev, 477 "Requested rate (%u Hz) higher than card's maximum\n", 478 params_rate(params)); 479 _snd_pcm_hw_param_setempty(params, SNDRV_PCM_HW_PARAM_RATE); 480 return -EBUSY; 481 } 482 483 spin_lock(&marian->reglock); 484 if (marian->desc->set_speedmode) 485 marian->desc->set_speedmode(marian, speedmode); 486 else 487 marian_generic_set_speedmode(marian, speedmode); 488 489 marian->detune = 0; 490 491 marian_generic_set_dco(marian, params_rate(params), 0); 492 spin_unlock(&marian->reglock); 493 494 if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) 495 snd_pcm_set_runtime_buffer(substream, &marian->playback_buf); 496 else 497 snd_pcm_set_runtime_buffer(substream, &marian->capture_buf); 498 499 // apply optional card specific hw constraints 500 if (marian->desc->hw_constraints_func) 501 marian->desc->hw_constraints_func(marian, substream, params); 502 503 return 0; 504 } 505
-- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki
On Mon, 18 Sep 2023 20:10:44 +0200, Ivan Orlov wrote:
+#include <sound/core.h> +#include <sound/control.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/initval.h> +#include <sound/info.h> +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/interrupt.h>
We usually include linux/* at first, followed by sound/*.
+#define DEBUG
Any need to define this for the production system?
+struct marian_card_descriptor; +struct marian_card; + +struct marian_card_descriptor { + char *name; + char *port_names; + unsigned int speedmode_max; + unsigned int ch_in; + unsigned int ch_out; + unsigned int midi_in; + unsigned int midi_out; + unsigned int serial_in; + unsigned int serial_out; + unsigned int wck_in; + unsigned int wck_out; + + unsigned int dma_bufsize; + + void (*hw_constraints_func)(struct marian_card *marian, + struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params); + /* custom function to set up ALSA controls */ + void (*create_controls)(struct marian_card *marian); + /* init is called after probing the card */ + int (*init_card)(struct marian_card *marian); + void (*free_card)(struct marian_card *marian); + /* prepare is called when ALSA is opening the card */ + void (*prepare)(struct marian_card *marian); + void (*set_speedmode)(struct marian_card *marian, unsigned int speedmode); + void (*proc_status)(struct marian_card *marian, struct snd_info_buffer *buffer); + void (*proc_ports)(struct marian_card *marian, struct snd_info_buffer *buffer, + unsigned int type); + + struct snd_pcm_hardware info_playback; + struct snd_pcm_hardware info_capture;
Do we need this kind of abstraction inside the driver? As far as I see, the driver supports only a single model, hence there is no real merit of abstracted / indirect function calls. So I stop reading at this point. thanks, Takashi
On 9/19/23 11:56, Takashi Iwai wrote:
On Mon, 18 Sep 2023 20:10:44 +0200, Ivan Orlov wrote:
+#include <sound/core.h> +#include <sound/control.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/initval.h> +#include <sound/info.h> +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/interrupt.h>
We usually include linux/* at first, followed by sound/*.
+#define DEBUG
Any need to define this for the production system?
+struct marian_card_descriptor; +struct marian_card; + +struct marian_card_descriptor { + char *name; + char *port_names; + unsigned int speedmode_max; + unsigned int ch_in; + unsigned int ch_out; + unsigned int midi_in; + unsigned int midi_out; + unsigned int serial_in; + unsigned int serial_out; + unsigned int wck_in; + unsigned int wck_out; + + unsigned int dma_bufsize; + + void (*hw_constraints_func)(struct marian_card *marian, + struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params); + /* custom function to set up ALSA controls */ + void (*create_controls)(struct marian_card *marian); + /* init is called after probing the card */ + int (*init_card)(struct marian_card *marian); + void (*free_card)(struct marian_card *marian); + /* prepare is called when ALSA is opening the card */ + void (*prepare)(struct marian_card *marian); + void (*set_speedmode)(struct marian_card *marian, unsigned int speedmode); + void (*proc_status)(struct marian_card *marian, struct snd_info_buffer *buffer); + void (*proc_ports)(struct marian_card *marian, struct snd_info_buffer *buffer, + unsigned int type); + + struct snd_pcm_hardware info_playback; + struct snd_pcm_hardware info_capture;
Do we need this kind of abstraction inside the driver? As far as I see, the driver supports only a single model, hence there is no real merit of abstracted / indirect function calls.
So I stop reading at this point.
thanks,
Takashi
Hi Takashi, Thank you for the review! I will send the next version after removing all indirections and cleaning the code again. -- Kind regards, Ivan Orlov
On Mon, Sep 18, 2023 at 10:10:44PM +0400, Ivan Orlov wrote:
+ +#define DEBUG
Do you mean to have DEBUG enabled at all times? Shouldn't this be a runtime issue with the normal dynamic debug infrastructure? thanks, greg k-h
On 9/19/23 12:04, Greg KH wrote:
On Mon, Sep 18, 2023 at 10:10:44PM +0400, Ivan Orlov wrote:
+ +#define DEBUG
Do you mean to have DEBUG enabled at all times? Shouldn't this be a runtime issue with the normal dynamic debug infrastructure?
thanks,
greg k-h
Hi Greg, Yeah, I was experimenting with dynamic debugging and I've just forgotten to remove it... I'll be more attentive next time :( By the way, is there any way to detect such issues automatically? I've seen that the kernel test robot detects a lot of similar stuff, perhaps there is any tools/linters which can be set up locally? -- Kind regards, Ivan Orlov
On Tue, Sep 19, 2023 at 12:46:34PM +0400, Ivan Orlov wrote:
By the way, is there any way to detect such issues automatically? I've seen that the kernel test robot detects a lot of similar stuff, perhaps there is any tools/linters which can be set up locally?
Not that I know of, sorry, I rely on the kernel test robot for lots of these things :) But, the robot is running all open tests, so dig into the public repo of it to see what it is using and perhaps run those tests locally? Lots of them are just different build options and running sparse. thanks, greg k-h
On 9/19/23 12:53, Greg KH wrote:
On Tue, Sep 19, 2023 at 12:46:34PM +0400, Ivan Orlov wrote:
By the way, is there any way to detect such issues automatically? I've seen that the kernel test robot detects a lot of similar stuff, perhaps there is any tools/linters which can be set up locally?
Not that I know of, sorry, I rely on the kernel test robot for lots of these things :)
But, the robot is running all open tests, so dig into the public repo of it to see what it is using and perhaps run those tests locally? Lots of them are just different build options and running sparse.
Alright, I will take a look on the sources. Thank you for the advice! :)
Hi Ivan, kernel test robot noticed the following build warnings: [auto build test WARNING on tiwai-sound/for-next] [also build test WARNING on tiwai-sound/for-linus linus/master v6.6 next-20231103] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in https://git-scm.com/docs/git-format-patch#_base_tree_information] url: https://github.com/intel-lab-lkp/linux/commits/Ivan-Orlov/ALSA-Add-new-drive... base: https://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git for-next patch link: https://lore.kernel.org/r/20230918181044.7257-2-ivan.orlov0322%40gmail.com patch subject: [PATCH v2 2/2] ALSA: Add new driver for Marian M2 sound card config: i386-allyesconfig (https://download.01.org/0day-ci/archive/20231106/202311060403.591giMV8-lkp@i...) compiler: clang version 16.0.4 (https://github.com/llvm/llvm-project.git ae42196bc493ffe877a7e3dff8be32035dea4d07) reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20231106/202311060403.591giMV8-lkp@i...) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp@intel.com> | Closes: https://lore.kernel.org/oe-kbuild-all/202311060403.591giMV8-lkp@intel.com/ All warnings (new ones prefixed by >>): sound/pci/marianm2.c:466:6: warning: variable 'buffer_frames' set but not used [-Wunused-but-set-variable] int buffer_frames; ^
sound/pci/marianm2.c:472:11: warning: variable 'speedmode' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] else if (params_rate(params) < RATE_FAST) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ sound/pci/marianm2.c:475:6: note: uninitialized use occurs here if (speedmode > marian->desc->speedmode_max) { ^~~~~~~~~ sound/pci/marianm2.c:472:7: note: remove the 'if' if its condition is always true else if (params_rate(params) < RATE_FAST) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ sound/pci/marianm2.c:465:24: note: initialize the variable 'speedmode' to silence this warning unsigned int speedmode; ^ = 0 2 warnings generated.
vim +472 sound/pci/marianm2.c 460 461 static int snd_marian_hw_params(struct snd_pcm_substream *substream, 462 struct snd_pcm_hw_params *params) 463 { 464 struct marian_card *marian = snd_pcm_substream_chip(substream); 465 unsigned int speedmode;
466 int buffer_frames; 467 468 buffer_frames = SUBSTREAM_BUF_SIZE / M2_FRAME_SIZE; 469 470 if (params_rate(params) < RATE_SLOW) 471 speedmode = SPEEDMODE_SLOW; 472 else if (params_rate(params) < RATE_FAST) 473 speedmode = SPEEDMODE_FAST; 474 475 if (speedmode > marian->desc->speedmode_max) { 476 dev_err(marian->card->dev, 477 "Requested rate (%u Hz) higher than card's maximum\n", 478 params_rate(params)); 479 _snd_pcm_hw_param_setempty(params, SNDRV_PCM_HW_PARAM_RATE); 480 return -EBUSY; 481 } 482 483 spin_lock(&marian->reglock); 484 if (marian->desc->set_speedmode) 485 marian->desc->set_speedmode(marian, speedmode); 486 else 487 marian_generic_set_speedmode(marian, speedmode); 488 489 marian->detune = 0; 490 491 marian_generic_set_dco(marian, params_rate(params), 0); 492 spin_unlock(&marian->reglock); 493 494 if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) 495 snd_pcm_set_runtime_buffer(substream, &marian->playback_buf); 496 else 497 snd_pcm_set_runtime_buffer(substream, &marian->capture_buf); 498 499 // apply optional card specific hw constraints 500 if (marian->desc->hw_constraints_func) 501 marian->desc->hw_constraints_func(marian, substream, params); 502 503 return 0; 504 } 505
-- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki
Ivan Orlov <ivan.orlov0322@gmail.com> writes:
Add documentation for the new MARIAN Seraph M2 sound card. It covers current development status, available controls of the card and information about the integrated loopback.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com> --- V1 -> V2: - Remove redundant documentation fix from the next patch in the series
One quick comment below...
Documentation/sound/cards/index.rst | 1 + Documentation/sound/cards/marian-m2.rst | 104 ++++++++++++++++++++++++ 2 files changed, 105 insertions(+) create mode 100644 Documentation/sound/cards/marian-m2.rst
diff --git a/Documentation/sound/cards/index.rst b/Documentation/sound/cards/index.rst index e68bbb13c384..e873592d8d00 100644 --- a/Documentation/sound/cards/index.rst +++ b/Documentation/sound/cards/index.rst @@ -19,3 +19,4 @@ Card-Specific Information serial-u16550 img-spdif-in pcmtest + marian-m2 diff --git a/Documentation/sound/cards/marian-m2.rst b/Documentation/sound/cards/marian-m2.rst new file mode 100644 index 000000000000..bf12445e20d7 --- /dev/null +++ b/Documentation/sound/cards/marian-m2.rst @@ -0,0 +1,104 @@ +.. SPDX-License-Identifier: GPL-2.0 + +======================= +MARIAN Seraph M2 Driver +======================= + +Sep 18, 2023 + +Ivan Orlov <ivan.orlov0322@gmail.com> + +STATE OF DEVELOPMENT +==================== + +This driver is based on the driver written by Florian Faber in 2012, which seemed to work fine. +However, the initial code contained multiple issues, which had to be solved before sending the +driver upstream.
Sticking to the 80-column limit is best for documentation, especially when there is no reason to go over it.
+The vendor lost the full documentation, so what we have here was recovered from drafts and found +after experiments with the card. + +What seems to be working fine: +- Playback and capture for all supported rates +- Integrated loopback (with some exceptions, see below) + +MEMORY MODEL +============ + +The hardware requires one huge contiguous DMA space to be allocated. After allocation, the bus address of +this buffer should be written to the hardware register. + +We can split this space into two parts: the first one contains samples for capture, another one contains +play samples: + +CAPTURE_CH_0, CAPTURE_CH_1, ..., CAPTURE_CH_127 | PLAY_CH_0, PLAY_CH_1, ..., PLAY_CH_127
You should really use literal blocks for this (and a lot that follows) or it won't render the way you want in HTML. The simplest way to do that is to use a double colon ("...samples::") and to indent the literal text. (OK, two comments, sorry about the off-by-one...:) Thanks, jon
On 9/19/23 11:57, Jonathan Corbet wrote:
Ivan Orlov <ivan.orlov0322@gmail.com> writes:
Add documentation for the new MARIAN Seraph M2 sound card. It covers current development status, available controls of the card and information about the integrated loopback.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com> --- V1 -> V2: - Remove redundant documentation fix from the next patch in the series
One quick comment below...
Documentation/sound/cards/index.rst | 1 + Documentation/sound/cards/marian-m2.rst | 104 ++++++++++++++++++++++++ 2 files changed, 105 insertions(+) create mode 100644 Documentation/sound/cards/marian-m2.rst
diff --git a/Documentation/sound/cards/index.rst b/Documentation/sound/cards/index.rst index e68bbb13c384..e873592d8d00 100644 --- a/Documentation/sound/cards/index.rst +++ b/Documentation/sound/cards/index.rst @@ -19,3 +19,4 @@ Card-Specific Information serial-u16550 img-spdif-in pcmtest + marian-m2 diff --git a/Documentation/sound/cards/marian-m2.rst b/Documentation/sound/cards/marian-m2.rst new file mode 100644 index 000000000000..bf12445e20d7 --- /dev/null +++ b/Documentation/sound/cards/marian-m2.rst @@ -0,0 +1,104 @@ +.. SPDX-License-Identifier: GPL-2.0 + +======================= +MARIAN Seraph M2 Driver +======================= + +Sep 18, 2023 + +Ivan Orlov <ivan.orlov0322@gmail.com> + +STATE OF DEVELOPMENT +==================== + +This driver is based on the driver written by Florian Faber in 2012, which seemed to work fine. +However, the initial code contained multiple issues, which had to be solved before sending the +driver upstream.
Sticking to the 80-column limit is best for documentation, especially when there is no reason to go over it.
+The vendor lost the full documentation, so what we have here was recovered from drafts and found +after experiments with the card. + +What seems to be working fine: +- Playback and capture for all supported rates +- Integrated loopback (with some exceptions, see below) + +MEMORY MODEL +============ + +The hardware requires one huge contiguous DMA space to be allocated. After allocation, the bus address of +this buffer should be written to the hardware register. + +We can split this space into two parts: the first one contains samples for capture, another one contains +play samples: + +CAPTURE_CH_0, CAPTURE_CH_1, ..., CAPTURE_CH_127 | PLAY_CH_0, PLAY_CH_1, ..., PLAY_CH_127
You should really use literal blocks for this (and a lot that follows) or it won't render the way you want in HTML. The simplest way to do that is to use a double colon ("...samples::") and to indent the literal text.
(OK, two comments, sorry about the off-by-one...:)
Thanks,
jon
Hi Jonathan, Thank you for the review, I'll rewrite the documentation so it will follow the 80-column rule. Also, in the next version I will use the literal blocks. Thanks again! -- Kind regards, Ivan Orlov
On Mon, Sep 18, 2023 at 10:10:43PM +0400, Ivan Orlov wrote:
Add documentation for the new MARIAN Seraph M2 sound card. It covers current development status, available controls of the card and information about the integrated loopback.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com> --- V1 -> V2: - Remove redundant documentation fix from the next patch in the series
Documentation/sound/cards/index.rst | 1 + Documentation/sound/cards/marian-m2.rst | 104 ++++++++++++++++++++++++ 2 files changed, 105 insertions(+) create mode 100644 Documentation/sound/cards/marian-m2.rst
diff --git a/Documentation/sound/cards/index.rst b/Documentation/sound/cards/index.rst index e68bbb13c384..e873592d8d00 100644 --- a/Documentation/sound/cards/index.rst +++ b/Documentation/sound/cards/index.rst @@ -19,3 +19,4 @@ Card-Specific Information serial-u16550 img-spdif-in pcmtest + marian-m2 diff --git a/Documentation/sound/cards/marian-m2.rst b/Documentation/sound/cards/marian-m2.rst new file mode 100644 index 000000000000..bf12445e20d7 --- /dev/null +++ b/Documentation/sound/cards/marian-m2.rst @@ -0,0 +1,104 @@ +.. SPDX-License-Identifier: GPL-2.0 + +======================= +MARIAN Seraph M2 Driver +======================= + +Sep 18, 2023 + +Ivan Orlov <ivan.orlov0322@gmail.com> + +STATE OF DEVELOPMENT +==================== + +This driver is based on the driver written by Florian Faber in 2012, which seemed to work fine. +However, the initial code contained multiple issues, which had to be solved before sending the +driver upstream.
Minor nit, shouldn't these lines be wrapped a bit shorter as it's a text file? 80 columns? The other files in this directory seem to all do that so maybe do the same here as well? thanks, greg k-h
participants (5)
-
Greg KH -
Ivan Orlov -
Jonathan Corbet -
kernel test robot -
Takashi Iwai