[PATCH] ASoC: wcd9335: Use int array instead of bitmask for TX mixers
From: Yassine Oudjana y.oudjana@protonmail.com
Currently slim_tx_mixer_get reports all TX mixers as enabled when at least one is, due to it reading the entire tx_port_value bitmask without testing the specific bit corresponding to a TX port. Furthermore, using the same bitmask for all capture DAIs makes setting one mixer affect them all. To prevent this, and since the SLIM TX muxes effectively only connect to one of the mixers at a time, turn tx_port_value into an int array storing the DAI index each of the ports is connected to.
Signed-off-by: Yassine Oudjana y.oudjana@protonmail.com --- sound/soc/codecs/wcd9335.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-)
diff --git a/sound/soc/codecs/wcd9335.c b/sound/soc/codecs/wcd9335.c index 7d40a61b03b0..a4d92f7aef9e 100644 --- a/sound/soc/codecs/wcd9335.c +++ b/sound/soc/codecs/wcd9335.c @@ -342,7 +342,7 @@ struct wcd9335_codec { struct regulator_bulk_data supplies[WCD9335_MAX_SUPPLY];
unsigned int rx_port_value[WCD9335_RX_MAX]; - unsigned int tx_port_value; + unsigned int tx_port_value[WCD9335_TX_MAX]; int hph_l_gain; int hph_r_gain; u32 rx_bias_count; @@ -1334,8 +1334,13 @@ static int slim_tx_mixer_get(struct snd_kcontrol *kc,
struct snd_soc_dapm_context *dapm = snd_soc_dapm_kcontrol_dapm(kc); struct wcd9335_codec *wcd = dev_get_drvdata(dapm->dev); + struct snd_soc_dapm_widget *widget = snd_soc_dapm_kcontrol_widget(kc); + struct soc_mixer_control *mixer = + (struct soc_mixer_control *)kc->private_value; + int dai_id = widget->shift; + int port_id = mixer->shift;
- ucontrol->value.integer.value[0] = wcd->tx_port_value; + ucontrol->value.integer.value[0] = wcd->tx_port_value[port_id] == dai_id;
return 0; } @@ -1358,12 +1363,12 @@ static int slim_tx_mixer_put(struct snd_kcontrol *kc, case AIF2_CAP: case AIF3_CAP: /* only add to the list if value not set */ - if (enable && !(wcd->tx_port_value & BIT(port_id))) { - wcd->tx_port_value |= BIT(port_id); + if (enable && wcd->tx_port_value[port_id] != dai_id) { + wcd->tx_port_value[port_id] = dai_id; list_add_tail(&wcd->tx_chs[port_id].list, &wcd->dai[dai_id].slim_ch_list); - } else if (!enable && (wcd->tx_port_value & BIT(port_id))) { - wcd->tx_port_value &= ~BIT(port_id); + } else if (!enable && wcd->tx_port_value[port_id] == dai_id) { + wcd->tx_port_value[port_id] = -1; list_del_init(&wcd->tx_chs[port_id].list); } break;
On Wed, 22 Jun 2022 10:17:45 +0400, Yassine Oudjana wrote:
From: Yassine Oudjana y.oudjana@protonmail.com
Currently slim_tx_mixer_get reports all TX mixers as enabled when at least one is, due to it reading the entire tx_port_value bitmask without testing the specific bit corresponding to a TX port. Furthermore, using the same bitmask for all capture DAIs makes setting one mixer affect them all. To prevent this, and since the SLIM TX muxes effectively only connect to one of the mixers at a time, turn tx_port_value into an int array storing the DAI index each of the ports is connected to.
[...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/1] ASoC: wcd9335: Use int array instead of bitmask for TX mixers commit: 4b07ef55d1d4178dbec584195be148685ea25c59
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
On Wed, 22 Jun 2022 10:17:45 +0400, Yassine Oudjana wrote:
From: Yassine Oudjana y.oudjana@protonmail.com
Currently slim_tx_mixer_get reports all TX mixers as enabled when at least one is, due to it reading the entire tx_port_value bitmask without testing the specific bit corresponding to a TX port. Furthermore, using the same bitmask for all capture DAIs makes setting one mixer affect them all. To prevent this, and since the SLIM TX muxes effectively only connect to one of the mixers at a time, turn tx_port_value into an int array storing the DAI index each of the ports is connected to.
[...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/1] ASoC: wcd9335: Use int array instead of bitmask for TX mixers commit: 4b07ef55d1d4178dbec584195be148685ea25c59
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
participants (2)
-
Mark Brown
-
Yassine Oudjana