[alsa-devel] [PATCH v2 1/2] regmap: Add support for device specific write and read flag masks.
Some buses like SPI have no standard notation of read or write operations. The general scheme here is to set or clear specific bits in the register address to indicate whether the operation is a read or write. We already support having a read flag mask per bus, but as there is no standard the bits which need to be set or cleared differ between devices and vendors, thus we need a mechanism to specify them per device.
This patch adds two new entries to the regmap_config struct, read_flag_mask and write_flag_mask. These will be or'ed onto the top byte when doing a read or write operation. If both masks are empty the device will fallback to the regmap_bus masks.
Signed-off-by: Lars-Peter Clausen lars@metafoo.de --- No changes since v1 --- drivers/base/regmap/internal.h | 3 +++ drivers/base/regmap/regmap.c | 15 ++++++++++++--- include/linux/regmap.h | 9 +++++++++ 3 files changed, 24 insertions(+), 3 deletions(-)
diff --git a/drivers/base/regmap/internal.h b/drivers/base/regmap/internal.h index 5ab3fef..7e14d5a 100644 --- a/drivers/base/regmap/internal.h +++ b/drivers/base/regmap/internal.h @@ -46,6 +46,9 @@ struct regmap { bool (*readable_reg)(struct device *dev, unsigned int reg); bool (*volatile_reg)(struct device *dev, unsigned int reg); bool (*precious_reg)(struct device *dev, unsigned int reg); + + u8 read_flag_mask; + u8 write_flag_mask; };
bool regmap_writeable(struct regmap *map, unsigned int reg); diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c index fa2bd89..8ecf8bf 100644 --- a/drivers/base/regmap/regmap.c +++ b/drivers/base/regmap/regmap.c @@ -147,6 +147,13 @@ struct regmap *regmap_init(struct device *dev, map->volatile_reg = config->volatile_reg; map->precious_reg = config->precious_reg;
+ if (config->read_flag_mask || config->write_flag_mask) { + map->read_flag_mask = config->read_flag_mask; + map->write_flag_mask = config->write_flag_mask; + } else { + map->read_flag_mask = bus->read_flag_mask; + } + switch (config->reg_bits) { case 4: switch (config->val_bits) { @@ -229,6 +236,7 @@ EXPORT_SYMBOL_GPL(regmap_exit); static int _regmap_raw_write(struct regmap *map, unsigned int reg, const void *val, size_t val_len) { + u8 *u8 = map->work_buf; void *buf; int ret = -ENOTSUPP; size_t len; @@ -242,6 +250,8 @@ static int _regmap_raw_write(struct regmap *map, unsigned int reg,
map->format.format_reg(map->work_buf, reg);
+ u8[0] |= map->write_flag_mask; + trace_regmap_hw_write_start(map->dev, reg, val_len / map->format.val_bytes);
@@ -369,13 +379,12 @@ static int _regmap_raw_read(struct regmap *map, unsigned int reg, void *val, map->format.format_reg(map->work_buf, reg);
/* - * Some buses flag reads by setting the high bits in the + * Some buses or devices flag reads by setting the high bits in the * register addresss; since it's always the high bits for all * current formats we can do this here rather than in * formatting. This may break if we get interesting formats. */ - if (map->bus->read_flag_mask) - u8[0] |= map->bus->read_flag_mask; + u8[0] |= map->read_flag_mask;
trace_regmap_hw_read_start(map->dev, reg, val_len / map->format.val_bytes); diff --git a/include/linux/regmap.h b/include/linux/regmap.h index 449e264..f0b8d47 100644 --- a/include/linux/regmap.h +++ b/include/linux/regmap.h @@ -53,6 +53,12 @@ struct reg_default { * @reg_defaults: Power on reset values for registers (for use with * register cache support). * @num_reg_defaults: Number of elements in reg_defaults. + * + * @read_flag_mask: Mask to be set in the top byte of the register when doing + * a read. + * @write_flag_mask: Mask to be set in the top byte of the register when doing + * a write. If both read_flag_mask and write_flag_mask are + * empty the regmap_bus default masks are used. */ struct regmap_config { int reg_bits; @@ -66,6 +72,9 @@ struct regmap_config { unsigned int max_register; struct reg_default *reg_defaults; int num_reg_defaults; + + u8 read_flag_mask; + u8 write_flag_mask; };
typedef int (*regmap_hw_write)(struct device *dev, const void *data,
Currently register read-back for the ad193x is broken, because it expects bit 0 of the upper byte to be set to indicate a read operation, while the regmap default for SPI is to use bit 7.
This patch also addresses another oddity of the device. There are SPI and I2C versions of this codec. In both cases the registers are 8-bit wide and numbered from 0x0 to 0x10, but in the SPI case there is also a so called 'global address' which is prefixed in-front of the register address. The global address mimics I2C behaviour and includes a static device address the and the read/write flag. This basically extends the register address to an 16-bit value numbered from 0x800 to 0x810. These are the register numbers which are currently used by the driver. This works, because I2C will ignore the upper 8 bits of the register, but it is still a bit confusing, as there are no such register numbers in the I2C case.
The approach taken by this patch is to number the registers from 0x00 to 0x10 and encode the global address for SPI mode into the read and write flag masks.
Signed-off-by: Lars-Peter Clausen lars@metafoo.de
--- Changes since v1: * Setup regmap in the driver instead the ASoC core.
Scott, it would be nice if you could test these changes since I don't have a ad1936 board here right now. But I compared the generated SPI signals with what is in 3.1 and they look identical, so it should work. --- sound/soc/codecs/ad193x.c | 65 +++++++++++++++++++++++++++++++++++++------- sound/soc/codecs/ad193x.h | 34 ++++++++++++------------ 2 files changed, 71 insertions(+), 28 deletions(-)
diff --git a/sound/soc/codecs/ad193x.c b/sound/soc/codecs/ad193x.c index eedb6f5..f934670 100644 --- a/sound/soc/codecs/ad193x.c +++ b/sound/soc/codecs/ad193x.c @@ -23,7 +23,7 @@
/* codec private data */ struct ad193x_priv { - enum snd_soc_control_type control_type; + struct regmap *regmap; int sysclk; };
@@ -349,10 +349,8 @@ static int ad193x_probe(struct snd_soc_codec *codec) struct snd_soc_dapm_context *dapm = &codec->dapm; int ret;
- if (ad193x->control_type == SND_SOC_I2C) - ret = snd_soc_codec_set_cache_io(codec, 8, 8, ad193x->control_type); - else - ret = snd_soc_codec_set_cache_io(codec, 16, 8, ad193x->control_type); + codec->control_data = ad193x->regmap; + ret = snd_soc_codec_set_cache_io(codec, 0, 0, SND_SOC_REGMAP); if (ret < 0) { dev_err(codec->dev, "failed to set cache I/O: %d\n", ret); return ret; @@ -388,6 +386,14 @@ static struct snd_soc_codec_driver soc_codec_dev_ad193x = { };
#if defined(CONFIG_SPI_MASTER) + +static const struct regmap_config ad193x_spi_regmap_config = { + .val_bits = 8, + .reg_bits = 16, + .read_flag_mask = 0x09, + .write_flag_mask = 0x08, +}; + static int __devinit ad193x_spi_probe(struct spi_device *spi) { struct ad193x_priv *ad193x; @@ -397,20 +403,36 @@ static int __devinit ad193x_spi_probe(struct spi_device *spi) if (ad193x == NULL) return -ENOMEM;
+ ad193x->regmap = regmap_init_spi(spi, &ad193x_spi_regmap_config); + if (IS_ERR(ad193x->regmap)) { + ret = PTR_ERR(ad193x->regmap); + goto err_free; + } + spi_set_drvdata(spi, ad193x); - ad193x->control_type = SND_SOC_SPI;
ret = snd_soc_register_codec(&spi->dev, &soc_codec_dev_ad193x, &ad193x_dai, 1); if (ret < 0) - kfree(ad193x); + goto err_regmap_exit; + + return 0; + +err_regmap_exit: + regmap_exit(ad193x->regmap); +err_free: + kfree(ad193x); + return ret; }
static int __devexit ad193x_spi_remove(struct spi_device *spi) { + struct ad193x_priv *ad193x = spi_get_drvdata(spi); + snd_soc_unregister_codec(&spi->dev); - kfree(spi_get_drvdata(spi)); + regmap_exit(ad193x->regmap); + kfree(ad193x); return 0; }
@@ -425,6 +447,12 @@ static struct spi_driver ad193x_spi_driver = { #endif
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + +static const struct regmap_config ad193x_i2c_regmap_config = { + .val_bits = 8, + .reg_bits = 8, +}; + static const struct i2c_device_id ad193x_id[] = { { "ad1936", 0 }, { "ad1937", 0 }, @@ -442,20 +470,35 @@ static int __devinit ad193x_i2c_probe(struct i2c_client *client, if (ad193x == NULL) return -ENOMEM;
+ ad193x->regmap = regmap_init_i2c(client, &ad193x_i2c_regmap_config); + if (IS_ERR(ad193x->regmap)) { + ret = PTR_ERR(ad193x->regmap); + goto err_free; + } + i2c_set_clientdata(client, ad193x); - ad193x->control_type = SND_SOC_I2C;
ret = snd_soc_register_codec(&client->dev, &soc_codec_dev_ad193x, &ad193x_dai, 1); if (ret < 0) - kfree(ad193x); + goto err_regmap_exit; + + return 0; + +err_regmap_exit: + regmap_exit(ad193x->regmap); +err_free: + kfree(ad193x); return ret; }
static int __devexit ad193x_i2c_remove(struct i2c_client *client) { + struct ad193x_priv *ad193x = i2c_get_clientdata(client); + snd_soc_unregister_codec(&client->dev); - kfree(i2c_get_clientdata(client)); + regmap_exit(ad193x->regmap); + kfree(ad193x); return 0; }
diff --git a/sound/soc/codecs/ad193x.h b/sound/soc/codecs/ad193x.h index cccc2e8..536e5f2 100644 --- a/sound/soc/codecs/ad193x.h +++ b/sound/soc/codecs/ad193x.h @@ -9,20 +9,20 @@ #ifndef __AD193X_H__ #define __AD193X_H__
-#define AD193X_PLL_CLK_CTRL0 0x800 +#define AD193X_PLL_CLK_CTRL0 0x00 #define AD193X_PLL_POWERDOWN 0x01 #define AD193X_PLL_INPUT_MASK (~0x6) #define AD193X_PLL_INPUT_256 (0 << 1) #define AD193X_PLL_INPUT_384 (1 << 1) #define AD193X_PLL_INPUT_512 (2 << 1) #define AD193X_PLL_INPUT_768 (3 << 1) -#define AD193X_PLL_CLK_CTRL1 0x801 -#define AD193X_DAC_CTRL0 0x802 +#define AD193X_PLL_CLK_CTRL1 0x01 +#define AD193X_DAC_CTRL0 0x02 #define AD193X_DAC_POWERDOWN 0x01 #define AD193X_DAC_SERFMT_MASK 0xC0 #define AD193X_DAC_SERFMT_STEREO (0 << 6) #define AD193X_DAC_SERFMT_TDM (1 << 6) -#define AD193X_DAC_CTRL1 0x803 +#define AD193X_DAC_CTRL1 0x03 #define AD193X_DAC_2_CHANNELS 0 #define AD193X_DAC_4_CHANNELS 1 #define AD193X_DAC_8_CHANNELS 2 @@ -33,11 +33,11 @@ #define AD193X_DAC_BCLK_MASTER (1 << 5) #define AD193X_DAC_LEFT_HIGH (1 << 3) #define AD193X_DAC_BCLK_INV (1 << 7) -#define AD193X_DAC_CTRL2 0x804 +#define AD193X_DAC_CTRL2 0x04 #define AD193X_DAC_WORD_LEN_SHFT 3 #define AD193X_DAC_WORD_LEN_MASK 0x18 #define AD193X_DAC_MASTER_MUTE 1 -#define AD193X_DAC_CHNL_MUTE 0x805 +#define AD193X_DAC_CHNL_MUTE 0x05 #define AD193X_DACL1_MUTE 0 #define AD193X_DACR1_MUTE 1 #define AD193X_DACL2_MUTE 2 @@ -46,28 +46,28 @@ #define AD193X_DACR3_MUTE 5 #define AD193X_DACL4_MUTE 6 #define AD193X_DACR4_MUTE 7 -#define AD193X_DAC_L1_VOL 0x806 -#define AD193X_DAC_R1_VOL 0x807 -#define AD193X_DAC_L2_VOL 0x808 -#define AD193X_DAC_R2_VOL 0x809 -#define AD193X_DAC_L3_VOL 0x80a -#define AD193X_DAC_R3_VOL 0x80b -#define AD193X_DAC_L4_VOL 0x80c -#define AD193X_DAC_R4_VOL 0x80d -#define AD193X_ADC_CTRL0 0x80e +#define AD193X_DAC_L1_VOL 0x06 +#define AD193X_DAC_R1_VOL 0x07 +#define AD193X_DAC_L2_VOL 0x08 +#define AD193X_DAC_R2_VOL 0x09 +#define AD193X_DAC_L3_VOL 0x0a +#define AD193X_DAC_R3_VOL 0x0b +#define AD193X_DAC_L4_VOL 0x0c +#define AD193X_DAC_R4_VOL 0x0d +#define AD193X_ADC_CTRL0 0x0e #define AD193X_ADC_POWERDOWN 0x01 #define AD193X_ADC_HIGHPASS_FILTER 1 #define AD193X_ADCL1_MUTE 2 #define AD193X_ADCR1_MUTE 3 #define AD193X_ADCL2_MUTE 4 #define AD193X_ADCR2_MUTE 5 -#define AD193X_ADC_CTRL1 0x80f +#define AD193X_ADC_CTRL1 0x0f #define AD193X_ADC_SERFMT_MASK 0x60 #define AD193X_ADC_SERFMT_STEREO (0 << 5) #define AD193X_ADC_SERFMT_TDM (1 << 5) #define AD193X_ADC_SERFMT_AUX (2 << 5) #define AD193X_ADC_WORD_LEN_MASK 0x3 -#define AD193X_ADC_CTRL2 0x810 +#define AD193X_ADC_CTRL2 0x10 #define AD193X_ADC_2_CHANNELS 0 #define AD193X_ADC_4_CHANNELS 1 #define AD193X_ADC_8_CHANNELS 2
On Mon, Sep 05, 2011 at 08:46:32PM +0200, Lars-Peter Clausen wrote:
Some buses like SPI have no standard notation of read or write operations. The general scheme here is to set or clear specific bits in the register address to indicate whether the operation is a read or write. We already support having a read flag mask per bus, but as there is no standard the bits which need to be set or cleared differ between devices and vendors, thus we need a mechanism to specify them per device.
So, I tried to apply this to my topic/interface branch (which is where I'm keeping stuff for merge into other trees) but that won't fly due to the internal.h change. What I might do to resolve the merge issues is to make a commit with the new regmap.h changes alone. This won't help in terms of actually running things but it'll keep things buildable which is more achievable.
Anyway, thanks for doing this - there's a bunch of other devices that need this.
On 5 September 2011 22:59, Mark Brown broonie@opensource.wolfsonmicro.comwrote:
On Mon, Sep 05, 2011 at 08:46:32PM +0200, Lars-Peter Clausen wrote:
Some buses like SPI have no standard notation of read or write
operations.
The general scheme here is to set or clear specific bits in the register address to indicate whether the operation is a read or write. We already support having a read flag mask per bus, but as there is no standard the bits which need to be set or cleared differ between devices and
vendors,
thus we need a mechanism to specify them per device.
So, I tried to apply this to my topic/interface branch (which is where I'm keeping stuff for merge into other trees) but that won't fly due to the internal.h change. What I might do to resolve the merge issues is to make a commit with the new regmap.h changes alone. This won't help in terms of actually running things but it'll keep things buildable which is more achievable.
Anyway, thanks for doing this - there's a bunch of other devices that need this.
Acked-by: Liam Girdwood lrg@ti.com
participants (3)
-
Girdwood, Liam -
Lars-Peter Clausen -
Mark Brown