[PATCH] ASoC: rt5682s: Fix the wrong jack type detected
From: Derek Fang derek.fang@realtek.com
Some powers were changed during the jack insert detection and clk's enable/disable in CCF. If in parallel, the influence has a chance to detect the wrong jack type.
We refer to the below commit of the variant codec (rt5682) to fix this issue. ASoC: rt5682: Fix deadlock on resume
1. Remove rt5682s_headset_detect in rt5682s_jd_check_handler and use jack_detect_work instead of. 2. Use dapm mutex used in CCF to protect most of jack_detect_work.
Signed-off-by: Derek Fang derek.fang@realtek.com --- sound/soc/codecs/rt5682s.c | 26 +++++++++----------------- sound/soc/codecs/rt5682s.h | 1 - 2 files changed, 9 insertions(+), 18 deletions(-)
diff --git a/sound/soc/codecs/rt5682s.c b/sound/soc/codecs/rt5682s.c index efa1016831dd..849fcd7132a8 100644 --- a/sound/soc/codecs/rt5682s.c +++ b/sound/soc/codecs/rt5682s.c @@ -822,6 +822,7 @@ static void rt5682s_jack_detect_handler(struct work_struct *work) { struct rt5682s_priv *rt5682s = container_of(work, struct rt5682s_priv, jack_detect_work.work); + struct snd_soc_dapm_context *dapm; int val, btn_type;
while (!rt5682s->component) @@ -830,7 +831,9 @@ static void rt5682s_jack_detect_handler(struct work_struct *work) while (!rt5682s->component->card->instantiated) usleep_range(10000, 15000);
- mutex_lock(&rt5682s->jdet_mutex); + dapm = snd_soc_component_get_dapm(rt5682s->component); + + snd_soc_dapm_mutex_lock(dapm); mutex_lock(&rt5682s->calibrate_mutex);
val = snd_soc_component_read(rt5682s->component, RT5682S_AJD1_CTRL) @@ -887,6 +890,9 @@ static void rt5682s_jack_detect_handler(struct work_struct *work) rt5682s->irq_work_delay_time = 50; }
+ mutex_unlock(&rt5682s->calibrate_mutex); + snd_soc_dapm_mutex_unlock(dapm); + snd_soc_jack_report(rt5682s->hs_jack, rt5682s->jack_type, SND_JACK_HEADSET | SND_JACK_BTN_0 | SND_JACK_BTN_1 | SND_JACK_BTN_2 | SND_JACK_BTN_3); @@ -896,9 +902,6 @@ static void rt5682s_jack_detect_handler(struct work_struct *work) schedule_delayed_work(&rt5682s->jd_check_work, 0); else cancel_delayed_work_sync(&rt5682s->jd_check_work); - - mutex_unlock(&rt5682s->calibrate_mutex); - mutex_unlock(&rt5682s->jdet_mutex); }
static void rt5682s_jd_check_handler(struct work_struct *work) @@ -906,14 +909,9 @@ static void rt5682s_jd_check_handler(struct work_struct *work) struct rt5682s_priv *rt5682s = container_of(work, struct rt5682s_priv, jd_check_work.work);
- if (snd_soc_component_read(rt5682s->component, RT5682S_AJD1_CTRL) - & RT5682S_JDH_RS_MASK) { + if (snd_soc_component_read(rt5682s->component, RT5682S_AJD1_CTRL) & RT5682S_JDH_RS_MASK) { /* jack out */ - rt5682s->jack_type = rt5682s_headset_detect(rt5682s->component, 0); - - snd_soc_jack_report(rt5682s->hs_jack, rt5682s->jack_type, - SND_JACK_HEADSET | SND_JACK_BTN_0 | SND_JACK_BTN_1 | - SND_JACK_BTN_2 | SND_JACK_BTN_3); + schedule_delayed_work(&rt5682s->jack_detect_work, 0); } else { schedule_delayed_work(&rt5682s->jd_check_work, 500); } @@ -1321,7 +1319,6 @@ static int rt5682s_hp_amp_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); - struct rt5682s_priv *rt5682s = snd_soc_component_get_drvdata(component);
switch (event) { case SND_SOC_DAPM_POST_PMU: @@ -1337,8 +1334,6 @@ static int rt5682s_hp_amp_event(struct snd_soc_dapm_widget *w, snd_soc_component_write(component, RT5682S_BIAS_CUR_CTRL_11, 0x6666); snd_soc_component_write(component, RT5682S_BIAS_CUR_CTRL_12, 0xa82a);
- mutex_lock(&rt5682s->jdet_mutex); - snd_soc_component_update_bits(component, RT5682S_HP_CTRL_2, RT5682S_HPO_L_PATH_MASK | RT5682S_HPO_R_PATH_MASK | RT5682S_HPO_SEL_IP_EN_SW, RT5682S_HPO_L_PATH_EN | @@ -1346,8 +1341,6 @@ static int rt5682s_hp_amp_event(struct snd_soc_dapm_widget *w, usleep_range(5000, 10000); snd_soc_component_update_bits(component, RT5682S_HP_AMP_DET_CTL_1, RT5682S_CP_SW_SIZE_MASK, RT5682S_CP_SW_SIZE_L | RT5682S_CP_SW_SIZE_S); - - mutex_unlock(&rt5682s->jdet_mutex); break;
case SND_SOC_DAPM_POST_PMD: @@ -3101,7 +3094,6 @@ static int rt5682s_i2c_probe(struct i2c_client *i2c,
mutex_init(&rt5682s->calibrate_mutex); mutex_init(&rt5682s->sar_mutex); - mutex_init(&rt5682s->jdet_mutex); rt5682s_calibrate(rt5682s);
regmap_update_bits(rt5682s->regmap, RT5682S_MICBIAS_2, diff --git a/sound/soc/codecs/rt5682s.h b/sound/soc/codecs/rt5682s.h index 1bf2ef7ce578..397a2531b6f6 100644 --- a/sound/soc/codecs/rt5682s.h +++ b/sound/soc/codecs/rt5682s.h @@ -1446,7 +1446,6 @@ struct rt5682s_priv { struct delayed_work jd_check_work; struct mutex calibrate_mutex; struct mutex sar_mutex; - struct mutex jdet_mutex;
#ifdef CONFIG_COMMON_CLK struct clk_hw dai_clks_hw[RT5682S_DAI_NUM_CLKS];
On Wed, 23 Feb 2022 18:14:50 +0800, derek.fang@realtek.com wrote:
From: Derek Fang derek.fang@realtek.com
Some powers were changed during the jack insert detection and clk's enable/disable in CCF. If in parallel, the influence has a chance to detect the wrong jack type.
[...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-linus
Thanks!
[1/1] ASoC: rt5682s: Fix the wrong jack type detected commit: c07ac3ee76e5e5506bca9c03fbbb15e40ab28430
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
participants (2)
-
derek.fang@realtek.com
-
Mark Brown