[alsa-devel] [RFC] sound: ppc: keywest: check if DEQ was already instantiated
Due to changes in i2c-powermac, for some Macs the DEQ is instantiated now in i2c-powermac while some need the instantiation here in the keywest sound driver. The proper fix is to convert this driver to AOA. Until then support both ways of instantiation. Before this patch, some Macs lost sound because the sound driver failed when instantiating the DEQ for the second time.
Signed-off-by: Wolfram Sang wsa@the-dreams.de ---
Dan, Mark: I hope I found a generic but not too intrusive solution to the doubled instantiation problem. Can you please test this patch on top of this one "sound: ppc: keywest: drop using attach adapter" from last time? Check if you have sound and send the dmesg output, please. I hope it compiles even, couldn't test that this time.
sound/ppc/keywest.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/sound/ppc/keywest.c b/sound/ppc/keywest.c index d7627bae08362e..6120a067494a44 100644 --- a/sound/ppc/keywest.c +++ b/sound/ppc/keywest.c @@ -31,10 +31,15 @@ */ static struct pmac_keywest *keywest_ctx;
+static bool keywest_probed;
static int keywest_probe(struct i2c_client *client, const struct i2c_device_id *id) { + keywest_probed = true; + /* If instantiated via i2c-powermac, we still need to set the client */ + if (!keywest_ctx->client) + keywest_ctx->client = client; i2c_set_clientdata(client, keywest_ctx); return 0; } @@ -92,7 +97,8 @@ static int keywest_remove(struct i2c_client *client)
static const struct i2c_device_id keywest_i2c_id[] = { - { "keywest", 0 }, + { "MAC,tas3004", 0 }, /* instantiated by i2c-powermac */ + { "keywest", 0 }, /* instantiated by us if needed */ { } };
@@ -149,8 +155,13 @@ int snd_pmac_keywest_init(struct pmac_keywest *i2c) return err; }
+ /* There was already a device from i2c-powermac. Great, let's return */ + if (keywest_probed) + return 0; + /* We assume Macs have consecutive I2C bus numbers starting at 0 */ while (adap) { + /* Scan for devices to be bound to */ err = keywest_attach_adapter(adap); if (!err) return 0;
Hi,
I applied this patch ("check if DEQ was already instantiated") on top of "sound: ppc: keywest: drop using attach adapter" and sound works great. Everything works as expected. Below is my dmesg output.
Regards,
Dan
On Sat, 5/23/15, Wolfram Sang wsa@the-dreams.de wrote:
Due to changes in i2c-powermac, for some Macs the DEQ is instantiated now in i2c-powermac while some need the instantiation here in the keywest sound driver. The proper fix is to convert this driver to AOA. Until then support both ways of instantiation. Before this patch, some Macs lost sound because the sound driver failed when instantiating the DEQ for the second time.
Signed-off-by: Wolfram Sang wsa@the-dreams.de
Dan, Mark: I hope I found a generic but not too intrusive solution to the doubled instantiation problem. Can you please test this patch on top of this one "sound: ppc: keywest: drop using attach adapter" from last time? Check if you have sound and send the dmesg output, please. I hope it compiles even, couldn't test that this time.
~$ dmesg [ 0.000000] Using PowerMac machine description [ 0.000000] Total memory = 640MB; using 2048kB for hash table (at c7e00000) [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.16.7-ckt9-custom4 (root@icebook) (gcc version 4.9.2 (Debian 4.9.2-10) ) #5 Mon May 25 23:52:51 PDT 2015 [ 0.000000] Found initrd at 0xc1500000:0xc220b000 [ 0.000000] Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0xc0 [ 0.000000] Mapped at 0xff7c0000 [ 0.000000] Found a Pangea mac-io controller, rev: 0, mapped at 0xff740000 [ 0.000000] Processor NAP mode on idle enabled. [ 0.000000] PowerMac motherboard: iBook 2 rev. 2 [ 0.000000] via-pmu: Server Mode is disabled [ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c [ 0.000000] bootconsole [udbg0] enabled [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0 [ 0.000000] PCI host bridge /pci@f0000000 ranges: [ 0.000000] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000 [ 0.000000] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000 [ 0.000000] MEM 0x0000000090000000..0x000000009fffffff -> 0x0000000090000000 [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0 [ 0.000000] PCI host bridge /pci@f2000000 (primary) ranges: [ 0.000000] MEM 0x00000000f3000000..0x00000000f3ffffff -> 0x00000000f3000000 [ 0.000000] IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000 [ 0.000000] MEM 0x0000000080000000..0x000000008fffffff -> 0x0000000080000000 [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0 [ 0.000000] PCI host bridge /pci@f4000000 ranges: [ 0.000000] MEM 0x00000000f5000000..0x00000000f5ffffff -> 0x00000000f5000000 [ 0.000000] IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000 [ 0.000000] nvram: Checking bank 0... [ 0.000000] nvram: gen0=1100, gen1=1101 [ 0.000000] nvram: Active bank is: 1 [ 0.000000] nvram: OF partition at 0x410 [ 0.000000] nvram: XP partition at 0x1020 [ 0.000000] nvram: NR partition at 0x1120 [ 0.000000] Top of RAM: 0x28000000, Total RAM: 0x28000000 [ 0.000000] Memory hole size: 0MB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00000000-0x27ffffff] [ 0.000000] Normal empty [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00000000-0x27ffffff] [ 0.000000] On node 0 totalpages: 163840 [ 0.000000] free_area_init_node: node 0, pgdat c05ebf0c, node_mem_map c076b000 [ 0.000000] DMA zone: 1280 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 163840 pages, LIFO batch:31 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 162560 [ 0.000000] Kernel command line: root=UUID=97b477c4-04c2-476e-9225-4eda6ca97833 ro nomodeset video=offb:off video=radeonfb:1024x768-32 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Sorting __ex_table... [ 0.000000] Memory: 626160K/655360K available (4252K kernel code, 320K rwdata, 1268K rodata, 292K init, 1395K bss, 29200K reserved, 0K highmem) [ 0.000000] Kernel virtual memory layout: [ 0.000000] * 0xfffcf000..0xfffff000 : fixmap [ 0.000000] * 0xff800000..0xffc00000 : highmem PTEs [ 0.000000] * 0xfde72000..0xff800000 : early ioremap [ 0.000000] * 0xe9000000..0xfde72000 : vmalloc & ioremap [ 0.000000] NR_IRQS:512 nr_irqs:512 16 [ 0.000000] mpic: Resetting [ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 1 CPUs [ 0.000000] mpic: ISU size: 64, shift: 6, mask: 3f [ 0.000000] mpic: Initializing for 64 sources [ 0.000000] GMT Delta read from XPRAM: -420 minutes, DST: on [ 0.000000] time_init: decrementer frequency = 24.835213 MHz [ 0.000000] time_init: processor frequency = 700.000000 MHz [ 0.000018] clocksource: timebase mult[2843f1d2] shift[24] registered [ 0.000512] clockevent: decrementer mult[65b99bc] shift[32] cpu[0] [ 0.000827] Console: colour dummy device 80x25 [ 0.001270] console [tty0] enabled [ 0.001686] bootconsole [udbg0] disabled [ 0.002484] pid_max: default: 32768 minimum: 301 [ 0.002622] Security Framework initialized [ 0.002671] AppArmor: AppArmor disabled by boot time parameter [ 0.002716] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002733] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.003965] Initializing cgroup subsys devices [ 0.004016] Initializing cgroup subsys freezer [ 0.004035] Initializing cgroup subsys net_cls [ 0.004072] Initializing cgroup subsys blkio [ 0.004100] Initializing cgroup subsys perf_event [ 0.006935] devtmpfs: initialized [ 0.008823] regulator-dummy: no parameters [ 0.009134] device-tree: Duplicate name in PowerPC,750@0, renamed to "l2-cache#1" [ 0.012932] NET: Registered protocol family 16 [ 0.014428] KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000 [ 0.014455] channel 0 bus <multibus> [ 0.014472] channel 1 bus <multibus> [ 0.014553] KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000 [ 0.014580] channel 0 bus <multibus> [ 0.014608] PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c [ 0.014629] channel 1 bus <multibus> [ 0.014644] channel 2 bus <multibus> [ 0.015638] PCI: Probing PCI hardware [ 0.015818] PCI host bridge to bus 0000:00 [ 0.015854] pci_bus 0000:00: root bus resource [io 0x802000-0x1001fff] (bus address [0x0000-0x7fffff]) [ 0.015883] pci_bus 0000:00: root bus resource [mem 0xf1000000-0xf1ffffff] [ 0.015905] pci_bus 0000:00: root bus resource [mem 0x90000000-0x9fffffff] [ 0.015930] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.015955] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff [ 0.016018] pci 0000:00:0b.0: [106b:0027] type 00 class 0x060000 [ 0.016314] pci 0000:00:10.0: [1002:4c59] type 00 class 0x030000 [ 0.016343] pci 0000:00:10.0: reg 0x10: [mem 0x98000000-0x9fffffff pref] [ 0.016359] pci 0000:00:10.0: reg 0x14: [io 0x802400-0x8024ff] [ 0.016374] pci 0000:00:10.0: reg 0x18: [mem 0x90000000-0x9000ffff] [ 0.016404] pci 0000:00:10.0: reg 0x30: [mem 0x90020000-0x9003ffff pref] [ 0.016447] pci 0000:00:10.0: supports D1 D2 [ 0.016658] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 [ 0.016864] PCI host bridge to bus 0001:10 [ 0.016886] pci_bus 0001:10: root bus resource [io 0x0000-0x7fffff] [ 0.016907] pci_bus 0001:10: root bus resource [mem 0xf3000000-0xf3ffffff] [ 0.016929] pci_bus 0001:10: root bus resource [mem 0x80000000-0x8fffffff] [ 0.016952] pci_bus 0001:10: root bus resource [bus 10-ff] [ 0.016973] pci_bus 0001:10: busn_res: [bus 10-ff] end is updated to ff [ 0.017017] pci 0001:10:0b.0: [106b:0028] type 00 class 0x060000 [ 0.017247] pci 0001:10:17.0: [106b:0025] type 00 class 0xff0000 [ 0.017268] pci 0001:10:17.0: reg 0x10: [mem 0x80000000-0x8007ffff] [ 0.017488] pci 0001:10:18.0: [106b:0026] type 00 class 0x0c0310 [ 0.017512] pci 0001:10:18.0: reg 0x10: [mem 0x80081000-0x80081fff] [ 0.017576] pci 0001:10:18.0: supports D1 D2 [ 0.017587] pci 0001:10:18.0: PME# supported from D1 D2 D3hot [ 0.017802] pci 0001:10:19.0: [106b:0026] type 00 class 0x0c0310 [ 0.017825] pci 0001:10:19.0: reg 0x10: [mem 0x80080000-0x80080fff] [ 0.017891] pci 0001:10:19.0: supports D1 D2 [ 0.017900] pci 0001:10:19.0: PME# supported from D1 D2 D3hot [ 0.018139] pci_bus 0001:10: busn_res: [bus 10-ff] end is updated to 10 [ 0.018305] PCI host bridge to bus 0002:20 [ 0.018330] pci_bus 0002:20: root bus resource [io 0xff7fe000-0xffffdfff] (bus address [0x0000-0x7fffff]) [ 0.018359] pci_bus 0002:20: root bus resource [mem 0xf5000000-0xf5ffffff] [ 0.018381] pci_bus 0002:20: root bus resource [bus 20-ff] [ 0.018402] pci_bus 0002:20: busn_res: [bus 20-ff] end is updated to ff [ 0.018445] pci 0002:20:0b.0: [106b:0029] type 00 class 0x060000 [ 0.018652] pci 0002:20:0e.0: [106b:0030] type 00 class 0x0c0010 [ 0.018672] pci 0002:20:0e.0: reg 0x10: [mem 0xf5000000-0xf5000fff] [ 0.018723] pci 0002:20:0e.0: supports D1 D2 [ 0.018733] pci 0002:20:0e.0: PME# supported from D0 D1 D2 D3hot [ 0.018939] pci 0002:20:0f.0: [106b:0024] type 00 class 0x020000 [ 0.018958] pci 0002:20:0f.0: reg 0x10: [mem 0xf5200000-0xf53fffff] [ 0.018995] pci 0002:20:0f.0: reg 0x30: [mem 0xf5100000-0xf51fffff pref] [ 0.019207] pci_bus 0002:20: busn_res: [bus 20-ff] end is updated to 20 [ 0.019281] PCI 0000:00 Cannot reserve Legacy IO [io 0x802000-0x802fff] [ 0.019303] pci_bus 0000:00: resource 4 [io 0x802000-0x1001fff] [ 0.019313] pci_bus 0000:00: resource 5 [mem 0xf1000000-0xf1ffffff] [ 0.019324] pci_bus 0000:00: resource 6 [mem 0x90000000-0x9fffffff] [ 0.019336] pci_bus 0001:10: resource 4 [io 0x0000-0x7fffff] [ 0.019346] pci_bus 0001:10: resource 5 [mem 0xf3000000-0xf3ffffff] [ 0.019356] pci_bus 0001:10: resource 6 [mem 0x80000000-0x8fffffff] [ 0.019367] pci_bus 0002:20: resource 4 [io 0xff7fe000-0xffffdfff] [ 0.019378] pci_bus 0002:20: resource 5 [mem 0xf5000000-0xf5ffffff] [ 0.025880] vgaarb: device added: PCI:0000:00:10.0,decodes=io+mem,owns=mem,locks=none [ 0.025925] vgaarb: loaded [ 0.025938] vgaarb: bridge control possible 0000:00:10.0 [ 0.026346] SCSI subsystem initialized [ 0.026546] libata version 3.00 loaded. [ 0.027309] Switched to clocksource timebase [ 0.046749] NET: Registered protocol family 2 [ 0.047990] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.048251] TCP bind hash table entries: 8192 (order: 3, 32768 bytes) [ 0.048487] TCP: Hash tables configured (established 8192 bind 8192) [ 0.049009] TCP: reno registered [ 0.049030] UDP hash table entries: 512 (order: 1, 8192 bytes) [ 0.049107] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes) [ 0.049425] NET: Registered protocol family 1 [ 0.049595] pci 0001:10:18.0: enabling device (0000 -> 0002) [ 0.103389] pci 0001:10:19.0: enabling device (0000 -> 0002) [ 0.159337] PCI: CLS mismatch (32 != 1020), using 32 bytes [ 0.159645] Unpacking initramfs... [ 1.095053] Freeing initrd memory: 13356K (c1500000 - c220b000) [ 1.095780] Thermal assist unit using timers, shrink_timer: 500 jiffies [ 1.096917] futex hash table entries: 256 (order: -1, 3072 bytes) [ 1.097014] audit: initializing netlink subsys (disabled) [ 1.097160] audit: type=2000 audit(1432654282.092:1): initialized [ 1.098346] VFS: Disk quotas dquot_6.5.2 [ 1.098428] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.098568] msgmni has been set to 1251 [ 1.099841] alg: No test for stdrng (krng) [ 1.099960] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.099992] io scheduler noop registered [ 1.100012] io scheduler deadline registered [ 1.100169] io scheduler cfq registered (default) [ 1.100703] radeonfb 0000:00:10.0: enabling device (0086 -> 0087) [ 1.294616] radeonfb 0000:00:10.0: Invalid ROM contents [ 1.294645] radeonfb (0000:00:10.0): Invalid ROM signature 8080 should be 0xaa55 [ 1.303347] radeonfb: Retrieved PLL infos from Open Firmware [ 1.303370] radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=166.00 Mhz, System=166.00 MHz [ 1.303392] radeonfb: PLL min 12000 max 35000 [ 1.400363] i2c i2c-2: unable to read EDID block. [ 1.552349] i2c i2c-2: unable to read EDID block. [ 1.704348] i2c i2c-2: unable to read EDID block. [ 1.856348] i2c i2c-3: unable to read EDID block. [ 2.008352] i2c i2c-3: unable to read EDID block. [ 2.160348] i2c i2c-3: unable to read EDID block. [ 2.275313] radeonfb: Monitor 1 type LCD found [ 2.275328] radeonfb: EDID probed [ 2.275341] radeonfb: Monitor 2 type no found [ 2.287314] radeonfb: Using Firmware dividers 0x0001003a from PPLL 0 [ 2.611312] radeonfb: Dynamic Clock Power Management enabled [ 3.067899] Console: switching to colour frame buffer device 128x48 [ 3.200238] radeonfb: Backlight initialized (radeonbl0) [ 3.200853] radeonfb (0000:00:10.0): ATI Radeon 4c59 "LY" [ 3.202154] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 3.204032] pmac_zilog: 0.6 (Benjamin Herrenschmidt benh@kernel.crashing.org) [ 3.204943] Serial: MPC52xx PSC UART driver [ 3.205537] Generic non-volatile memory driver v1.1 [ 3.206279] Linux agpgart interface v0.103 [ 3.206822] agpgart-uninorth 0000:00:0b.0: Apple UniNorth/Pangea chipset [ 3.210164] agpgart-uninorth 0000:00:0b.0: configuring for size idx: 64 [ 3.211089] agpgart-uninorth 0000:00:0b.0: AGP aperture is 256M @ 0x0 [ 3.212160] MacIO PCI driver attached to Pangea chipset [ 3.214406] 0.00013020:ch-a: ttyPZ0 at MMIO 0x80013020 (irq = 22, base_baud = 230400) is a Z85c30 ESCC - Serial port [ 3.216111] 0.00013000:ch-b: ttyPZ1 at MMIO 0x80013000 (irq = 23, base_baud = 230400) is a Z85c30 ESCC - Serial port [ 3.218661] adb: starting probe task... [ 3.473562] adb devices: [2]: 2 c3 [3]: 3 1 [7]: 7 1f [ 3.480283] ADB keyboard at 2, handler 1 [ 3.480776] Detected ADB keyboard, type ANSI. [ 3.481549] input: ADB keyboard as /devices/virtual/input/input0 [ 3.482459] input: ADB Powerbook buttons as /devices/virtual/input/input1 [ 3.498417] ADB mouse at 3, handler set to 4 (trackpad) [ 3.558440] input: ADB mouse as /devices/virtual/input/input2 [ 3.559120] adb: finished probe task... [ 4.235335] pata-macio 0.0001f000:ata-4: Activating pata-macio chipset KeyLargo ATA-4, Apple bus ID 2 [ 4.237278] scsi0 : pata_macio [ 4.259768] ata1: PATA max UDMA/66 irq 19 [ 4.282443] mousedev: PS/2 mouse device common for all mice [ 4.305519] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0 [ 4.328218] Registering PowerMac CPU frequency driver [ 4.350493] Low: 400 Mhz, High: 700 Mhz, Boot: 700 Mhz [ 4.373142] drop_monitor: Initializing network drop monitor service [ 4.396273] TCP: cubic registered [ 4.419165] NET: Registered protocol family 10 [ 4.442814] mip6: Mobile IPv6 [ 4.465527] NET: Registered protocol family 17 [ 4.488313] Key type dns_resolver registered [ 4.511641] registered taskstats version 1 [ 4.534980] input: PMU as /devices/virtual/input/input3 [ 4.558293] rtc-generic rtc-generic: setting system clock to 2015-05-26 08:31:25 UTC (1432629085) [ 4.582047] PM: Hibernation image not present or could not be loaded. [ 5.218743] ata1.00: ATA-5: TOSHIBA MK3018GAS, Q3.03 B, max UDMA/100 [ 5.242497] ata1.00: 58605120 sectors, multi 16: LBA [ 5.266500] ata1.01: ATAPI: SONY CD-RW CRX800E, 1.3p, max MWDMA2 [ 5.291125] ata1.00: limited to UDMA/33 due to 40-wire cable [ 5.323797] ata1.00: configured for UDMA/33 [ 5.363651] ata1.01: configured for MWDMA2 [ 5.399259] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK3018GA 3 B PQ: 0 ANSI: 5 [ 5.427805] scsi 0:0:1:0: CD-ROM SONY CD-RW CRX800E 1.3p PQ: 0 ANSI: 5 [ 5.456983] Freeing unused kernel memory: 292K (c0568000 - c05b1000) [ 5.589042] systemd-udevd[52]: starting version 215 [ 5.645884] random: systemd-udevd urandom read with 10 bits of entropy available [ 5.799434] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 5.826206] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 5.857326] sungem.c:v1.0 David S. Miller davem@redhat.com [ 5.888329] sd 0:0:0:0: [sda] 58605120 512-byte logical blocks: (30.0 GB/27.9 GiB) [ 5.957056] usbcore: registered new interface driver usbfs [ 6.044089] sd 0:0:0:0: [sda] Write Protect is off [ 6.070911] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.073826] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 6.081876] gem 0002:20:0f.0 eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:03:93:99:74:70 [ 6.112172] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 6.163525] usbcore: registered new interface driver hub [ 6.234764] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.269375] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 6.299225] usbcore: registered new device driver usb [ 6.327509] firewire_ohci 0002:20:0e.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0 [ 6.359250] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 6.402972] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 6.435778] ehci-pci: EHCI PCI platform driver [ 6.467479] ohci-pci: OHCI PCI platform driver [ 6.497504] sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 [ 6.527439] ohci-pci 0001:10:18.0: OHCI PCI host controller [ 6.561342] ohci-pci 0001:10:18.0: new USB bus registered, assigned bus number 1 [ 6.590320] ohci-pci 0001:10:18.0: irq 27, io mem 0x80081000 [ 6.690874] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.719325] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.747832] usb usb1: Product: OHCI PCI host controller [ 6.775962] usb usb1: Manufacturer: Linux 3.16.7-ckt9-custom4 ohci_hcd [ 6.804083] usb usb1: SerialNumber: 0001:10:18.0 [ 6.836390] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.864703] firewire_core 0002:20:0e.0: created device fw0: GUID 000393fffe997470, S400 [ 6.895663] hub 1-0:1.0: USB hub found [ 6.941286] hub 1-0:1.0: 2 ports detected [ 6.970432] ohci-pci 0001:10:19.0: OHCI PCI host controller [ 6.999490] ohci-pci 0001:10:19.0: new USB bus registered, assigned bus number 2 [ 7.028746] ohci-pci 0001:10:19.0: irq 28, io mem 0x80080000 [ 7.130803] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 7.159799] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.188417] usb usb2: Product: OHCI PCI host controller [ 7.216524] usb usb2: Manufacturer: Linux 3.16.7-ckt9-custom4 ohci_hcd [ 7.244807] usb usb2: SerialNumber: 0001:10:19.0 [ 7.274070] hub 2-0:1.0: USB hub found [ 7.301995] hub 2-0:1.0: 2 ports detected [ 9.278050] random: nonblocking pool is initialized [ 9.437900] PM: Starting manual resume from disk [ 9.466024] PM: Hibernation image partition 8:12 present [ 9.466030] PM: Looking for hibernation image. [ 9.484138] PM: Image not found (code -22) [ 9.484145] PM: Hibernation image not present or could not be loaded. [ 10.043383] EXT4-fs (sda13): mounted filesystem with ordered data mode. Opts: (null) [ 11.328636] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) [ 11.386327] systemd[1]: Detected architecture 'ppc'. [ 11.901558] systemd[1]: Inserted module 'autofs4' [ 11.947070] systemd[1]: Set hostname to <icebook>. [ 14.332031] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. [ 14.359820] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 14.387139] systemd[1]: Starting Remote File Systems (Pre). [ 14.442531] systemd[1]: Reached target Remote File Systems (Pre). [ 14.469678] systemd[1]: Starting Encrypted Volumes. [ 14.523970] systemd[1]: Reached target Encrypted Volumes. [ 14.550995] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. [ 14.578595] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 14.606144] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. [ 14.662903] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 14.691707] systemd[1]: Expecting device dev-disk-by\x2duuid-fdb8f9e3\x2d2abb\x2d4f68\x2d9cb4\x2d72f0c40f6585.device... [ 14.750611] systemd[1]: Expecting device dev-sda10.device... [ 14.810285] systemd[1]: Expecting device dev-sda11.device... [ 14.871165] systemd[1]: Starting Root Slice. [ 14.931020] systemd[1]: Created slice Root Slice. [ 14.960615] systemd[1]: Starting User and Session Slice. [ 15.021058] systemd[1]: Created slice User and Session Slice. [ 15.050894] systemd[1]: Starting Delayed Shutdown Socket. [ 15.111485] systemd[1]: Listening on Delayed Shutdown Socket. [ 15.141757] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ 15.203242] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 15.233664] systemd[1]: Starting Journal Socket (/dev/log). [ 15.294099] systemd[1]: Listening on Journal Socket (/dev/log). [ 15.324174] systemd[1]: Starting udev Control Socket. [ 15.383968] systemd[1]: Listening on udev Control Socket. [ 15.413310] systemd[1]: Starting udev Kernel Socket. [ 15.472461] systemd[1]: Listening on udev Kernel Socket. [ 15.501435] systemd[1]: Starting Journal Socket. [ 15.558075] systemd[1]: Listening on Journal Socket. [ 15.586272] systemd[1]: Starting System Slice. [ 15.642931] systemd[1]: Created slice System Slice. [ 15.671160] systemd[1]: Started File System Check on Root Device. [ 15.699558] systemd[1]: Starting system-getty.slice. [ 15.756320] systemd[1]: Created slice system-getty.slice. [ 15.784499] systemd[1]: Starting Increase datagram queue length... [ 15.844624] systemd[1]: Mounting Debug File System... [ 15.910863] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 15.982042] systemd[1]: Mounted Huge Pages File System. [ 16.016276] systemd[1]: Starting udev Coldplug all Devices... [ 16.195035] systemd[1]: Starting Load Kernel Modules... [ 16.322821] systemd[1]: Started Set Up Additional Binary Formats. [ 16.350340] systemd[1]: Mounting POSIX Message Queue File System... [ 16.408802] systemd[1]: Starting Slices. [ 16.486160] systemd[1]: Reached target Slices. [ 16.565115] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 16.665299] systemd[1]: Starting Create Static Device Nodes in /dev... [ 16.782196] systemd[1]: Started udev Coldplug all Devices. [ 16.825486] lp: driver loaded but no devices found [ 16.928456] fuse init (API version 7.23) [ 17.153889] systemd[1]: Started Increase datagram queue length. [ 17.210814] systemd[1]: Mounted Debug File System. [ 17.267416] systemd[1]: Mounted POSIX Message Queue File System. [ 17.334588] systemd[1]: Starting Syslog Socket. [ 17.390102] systemd[1]: Listening on Syslog Socket. [ 17.417807] systemd[1]: Starting Journal Service... [ 17.508394] systemd[1]: Started Journal Service. [ 17.712676] cfg80211: Calling CRDA to update world regulatory domain [ 17.809342] orinoco 0.15 (David Gibson hermes@gibson.dropbear.id.au, Pavel Roskin proski@gnu.org, et al) [ 17.840427] airport 0.15 (Benjamin Herrenschmidt benh@kernel.crashing.org) [ 17.840540] airport: Physical address 80030000 [ 18.187799] systemd-udevd[144]: starting version 215 [ 19.044415] airport 0.00030000:radio: Hardware identity 0005:0001:0001:0002 [ 19.071780] airport 0.00030000:radio: Station identity 001f:0001:0008:0046 [ 19.098532] airport 0.00030000:radio: Firmware determined as Lucent/Agere 8.70 [ 19.263133] airport 0.00030000:radio: firmware: direct-loading firmware agere_sta_fw.bin [ 19.377069] airport 0.00030000:radio: Hardware identity 0005:0001:0001:0002 [ 19.403544] airport 0.00030000:radio: Station identity 001f:0002:0009:0030 [ 19.429104] airport 0.00030000:radio: Firmware determined as Lucent/Agere 9.48 [ 19.454303] airport 0.00030000:radio: Ad-hoc demo mode supported [ 19.479373] airport 0.00030000:radio: IEEE standard IBSS ad-hoc mode supported [ 19.504417] airport 0.00030000:radio: WEP supported, 104-bit key [ 19.529230] airport 0.00030000:radio: WPA-PSK supported [ 20.456095] PowerMac i2c bus pmu 2 registered [ 20.481449] PowerMac i2c bus pmu 1 registered [ 20.507471] PowerMac i2c bus mac-io 0 registered [ 20.531659] i2c i2c-6: No i2c address for /pci@f2000000/mac-io@17/i2c@18000/i2c-modem [ 20.561860] PowerMac i2c bus uni-n 1 registered [ 20.596036] i2c i2c-7: i2c-powermac: modalias failure on /uni-n@f8000000/i2c@f8001000/cereal@1c0 [ 20.623810] PowerMac i2c bus uni-n 0 registered [ 21.067085] input: PowerMac Beep as /devices/pci0001:10/0001:10:17.0/input/input4 [ 22.274630] [drm] Initialized drm 1.1.0 20060810 [ 24.092092] [drm] VGACON disable radeon kernel modesetting. [ 24.115993] [drm:radeon_init] *ERROR* No UMS support in radeon module! [ 24.361299] EXT4-fs (sda13): re-mounted. Opts: errors=remount-ro [ 24.940172] cfg80211: World regulatory domain updated: [ 24.940188] cfg80211: DFS Master region: unset [ 24.940189] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 24.940206] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 24.940212] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 24.940217] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 24.940225] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 24.940232] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 24.940238] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 24.940244] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 24.940249] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 27.106633] Adding 374996k swap on /dev/sda12. Priority:-1 extents:1 across:374996k [ 27.168400] hfsplus: Filesystem was not cleanly unmounted, running fsck.hfsplus is recommended. mounting read-only. [ 27.262970] hfsplus: Filesystem was not cleanly unmounted, running fsck.hfsplus is recommended. mounting read-only. [ 27.835464] systemd-journald[141]: Received request to flush runtime journal from PID 1 [ 29.127671] sungem_phy: PHY ID: 4061e4, addr: 0 [ 29.128024] gem 0002:20:0f.0 eth0: Found BCM5221 PHY [ 29.128322] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 31.465846] RPC: Registered named UNIX socket transport module. [ 31.468756] RPC: Registered udp transport module. [ 31.471433] RPC: Registered tcp transport module. [ 31.474051] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 31.535202] FS-Cache: Loaded [ 31.537910] gem 0002:20:0f.0 eth0: Link is up at 100 Mbps, full-duplex [ 31.540937] gem 0002:20:0f.0 eth0: Pause is disabled [ 31.545855] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 31.640991] FS-Cache: Netfs 'nfs' registered for caching [ 31.807108] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 36.063021] input: Mouseemu virtual keyboard as /devices/virtual/input/input5 [ 36.079404] input: Mouseemu virtual mouse as /devices/virtual/input/input6 [ 48.860034] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
At Tue, 26 May 2015 02:19:34 -0700, Dan DeVoto wrote:
Hi,
I applied this patch ("check if DEQ was already instantiated") on top of "sound: ppc: keywest: drop using attach adapter" and sound works great. Everything works as expected. Below is my dmesg output.
Very well, shall I merge the patch as is?
thanks,
Takashi
Regards,
Dan
On Sat, 5/23/15, Wolfram Sang wsa@the-dreams.de wrote:
Due to changes in i2c-powermac, for some Macs the DEQ is instantiated now in i2c-powermac while some need the instantiation here in the keywest sound driver. The proper fix is to convert this driver to AOA. Until then support both ways of instantiation. Before this patch, some Macs lost sound because the sound driver failed when instantiating the DEQ for the second time.
Signed-off-by: Wolfram Sang wsa@the-dreams.de
Dan, Mark: I hope I found a generic but not too intrusive solution to the doubled instantiation problem. Can you please test this patch on top of this one "sound: ppc: keywest: drop using attach adapter" from last time? Check if you have sound and send the dmesg output, please. I hope it compiles even, couldn't test that this time.
~$ dmesg [ 0.000000] Using PowerMac machine description [ 0.000000] Total memory = 640MB; using 2048kB for hash table (at c7e00000) [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.16.7-ckt9-custom4 (root@icebook) (gcc version 4.9.2 (Debian 4.9.2-10) ) #5 Mon May 25 23:52:51 PDT 2015 [ 0.000000] Found initrd at 0xc1500000:0xc220b000 [ 0.000000] Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0xc0 [ 0.000000] Mapped at 0xff7c0000 [ 0.000000] Found a Pangea mac-io controller, rev: 0, mapped at 0xff740000 [ 0.000000] Processor NAP mode on idle enabled. [ 0.000000] PowerMac motherboard: iBook 2 rev. 2 [ 0.000000] via-pmu: Server Mode is disabled [ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c [ 0.000000] bootconsole [udbg0] enabled [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0 [ 0.000000] PCI host bridge /pci@f0000000 ranges: [ 0.000000] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000 [ 0.000000] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000 [ 0.000000] MEM 0x0000000090000000..0x000000009fffffff -> 0x0000000090000000 [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0 [ 0.000000] PCI host bridge /pci@f2000000 (primary) ranges: [ 0.000000] MEM 0x00000000f3000000..0x00000000f3ffffff -> 0x00000000f3000000 [ 0.000000] IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000 [ 0.000000] MEM 0x0000000080000000..0x000000008fffffff -> 0x0000000080000000 [ 0.000000] Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0 [ 0.000000] PCI host bridge /pci@f4000000 ranges: [ 0.000000] MEM 0x00000000f5000000..0x00000000f5ffffff -> 0x00000000f5000000 [ 0.000000] IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000 [ 0.000000] nvram: Checking bank 0... [ 0.000000] nvram: gen0=1100, gen1=1101 [ 0.000000] nvram: Active bank is: 1 [ 0.000000] nvram: OF partition at 0x410 [ 0.000000] nvram: XP partition at 0x1020 [ 0.000000] nvram: NR partition at 0x1120 [ 0.000000] Top of RAM: 0x28000000, Total RAM: 0x28000000 [ 0.000000] Memory hole size: 0MB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00000000-0x27ffffff] [ 0.000000] Normal empty [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00000000-0x27ffffff] [ 0.000000] On node 0 totalpages: 163840 [ 0.000000] free_area_init_node: node 0, pgdat c05ebf0c, node_mem_map c076b000 [ 0.000000] DMA zone: 1280 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 163840 pages, LIFO batch:31 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 162560 [ 0.000000] Kernel command line: root=UUID=97b477c4-04c2-476e-9225-4eda6ca97833 ro nomodeset video=offb:off video=radeonfb:1024x768-32 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Sorting __ex_table... [ 0.000000] Memory: 626160K/655360K available (4252K kernel code, 320K rwdata, 1268K rodata, 292K init, 1395K bss, 29200K reserved, 0K highmem) [ 0.000000] Kernel virtual memory layout: [ 0.000000] * 0xfffcf000..0xfffff000 : fixmap [ 0.000000] * 0xff800000..0xffc00000 : highmem PTEs [ 0.000000] * 0xfde72000..0xff800000 : early ioremap [ 0.000000] * 0xe9000000..0xfde72000 : vmalloc & ioremap [ 0.000000] NR_IRQS:512 nr_irqs:512 16 [ 0.000000] mpic: Resetting [ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 1 CPUs [ 0.000000] mpic: ISU size: 64, shift: 6, mask: 3f [ 0.000000] mpic: Initializing for 64 sources [ 0.000000] GMT Delta read from XPRAM: -420 minutes, DST: on [ 0.000000] time_init: decrementer frequency = 24.835213 MHz [ 0.000000] time_init: processor frequency = 700.000000 MHz [ 0.000018] clocksource: timebase mult[2843f1d2] shift[24] registered [ 0.000512] clockevent: decrementer mult[65b99bc] shift[32] cpu[0] [ 0.000827] Console: colour dummy device 80x25 [ 0.001270] console [tty0] enabled [ 0.001686] bootconsole [udbg0] disabled [ 0.002484] pid_max: default: 32768 minimum: 301 [ 0.002622] Security Framework initialized [ 0.002671] AppArmor: AppArmor disabled by boot time parameter [ 0.002716] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002733] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.003965] Initializing cgroup subsys devices [ 0.004016] Initializing cgroup subsys freezer [ 0.004035] Initializing cgroup subsys net_cls [ 0.004072] Initializing cgroup subsys blkio [ 0.004100] Initializing cgroup subsys perf_event [ 0.006935] devtmpfs: initialized [ 0.008823] regulator-dummy: no parameters [ 0.009134] device-tree: Duplicate name in PowerPC,750@0, renamed to "l2-cache#1" [ 0.012932] NET: Registered protocol family 16 [ 0.014428] KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000 [ 0.014455] channel 0 bus <multibus> [ 0.014472] channel 1 bus <multibus> [ 0.014553] KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000 [ 0.014580] channel 0 bus <multibus> [ 0.014608] PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c [ 0.014629] channel 1 bus <multibus> [ 0.014644] channel 2 bus <multibus> [ 0.015638] PCI: Probing PCI hardware [ 0.015818] PCI host bridge to bus 0000:00 [ 0.015854] pci_bus 0000:00: root bus resource [io 0x802000-0x1001fff] (bus address [0x0000-0x7fffff]) [ 0.015883] pci_bus 0000:00: root bus resource [mem 0xf1000000-0xf1ffffff] [ 0.015905] pci_bus 0000:00: root bus resource [mem 0x90000000-0x9fffffff] [ 0.015930] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.015955] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff [ 0.016018] pci 0000:00:0b.0: [106b:0027] type 00 class 0x060000 [ 0.016314] pci 0000:00:10.0: [1002:4c59] type 00 class 0x030000 [ 0.016343] pci 0000:00:10.0: reg 0x10: [mem 0x98000000-0x9fffffff pref] [ 0.016359] pci 0000:00:10.0: reg 0x14: [io 0x802400-0x8024ff] [ 0.016374] pci 0000:00:10.0: reg 0x18: [mem 0x90000000-0x9000ffff] [ 0.016404] pci 0000:00:10.0: reg 0x30: [mem 0x90020000-0x9003ffff pref] [ 0.016447] pci 0000:00:10.0: supports D1 D2 [ 0.016658] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 [ 0.016864] PCI host bridge to bus 0001:10 [ 0.016886] pci_bus 0001:10: root bus resource [io 0x0000-0x7fffff] [ 0.016907] pci_bus 0001:10: root bus resource [mem 0xf3000000-0xf3ffffff] [ 0.016929] pci_bus 0001:10: root bus resource [mem 0x80000000-0x8fffffff] [ 0.016952] pci_bus 0001:10: root bus resource [bus 10-ff] [ 0.016973] pci_bus 0001:10: busn_res: [bus 10-ff] end is updated to ff [ 0.017017] pci 0001:10:0b.0: [106b:0028] type 00 class 0x060000 [ 0.017247] pci 0001:10:17.0: [106b:0025] type 00 class 0xff0000 [ 0.017268] pci 0001:10:17.0: reg 0x10: [mem 0x80000000-0x8007ffff] [ 0.017488] pci 0001:10:18.0: [106b:0026] type 00 class 0x0c0310 [ 0.017512] pci 0001:10:18.0: reg 0x10: [mem 0x80081000-0x80081fff] [ 0.017576] pci 0001:10:18.0: supports D1 D2 [ 0.017587] pci 0001:10:18.0: PME# supported from D1 D2 D3hot [ 0.017802] pci 0001:10:19.0: [106b:0026] type 00 class 0x0c0310 [ 0.017825] pci 0001:10:19.0: reg 0x10: [mem 0x80080000-0x80080fff] [ 0.017891] pci 0001:10:19.0: supports D1 D2 [ 0.017900] pci 0001:10:19.0: PME# supported from D1 D2 D3hot [ 0.018139] pci_bus 0001:10: busn_res: [bus 10-ff] end is updated to 10 [ 0.018305] PCI host bridge to bus 0002:20 [ 0.018330] pci_bus 0002:20: root bus resource [io 0xff7fe000-0xffffdfff] (bus address [0x0000-0x7fffff]) [ 0.018359] pci_bus 0002:20: root bus resource [mem 0xf5000000-0xf5ffffff] [ 0.018381] pci_bus 0002:20: root bus resource [bus 20-ff] [ 0.018402] pci_bus 0002:20: busn_res: [bus 20-ff] end is updated to ff [ 0.018445] pci 0002:20:0b.0: [106b:0029] type 00 class 0x060000 [ 0.018652] pci 0002:20:0e.0: [106b:0030] type 00 class 0x0c0010 [ 0.018672] pci 0002:20:0e.0: reg 0x10: [mem 0xf5000000-0xf5000fff] [ 0.018723] pci 0002:20:0e.0: supports D1 D2 [ 0.018733] pci 0002:20:0e.0: PME# supported from D0 D1 D2 D3hot [ 0.018939] pci 0002:20:0f.0: [106b:0024] type 00 class 0x020000 [ 0.018958] pci 0002:20:0f.0: reg 0x10: [mem 0xf5200000-0xf53fffff] [ 0.018995] pci 0002:20:0f.0: reg 0x30: [mem 0xf5100000-0xf51fffff pref] [ 0.019207] pci_bus 0002:20: busn_res: [bus 20-ff] end is updated to 20 [ 0.019281] PCI 0000:00 Cannot reserve Legacy IO [io 0x802000-0x802fff] [ 0.019303] pci_bus 0000:00: resource 4 [io 0x802000-0x1001fff] [ 0.019313] pci_bus 0000:00: resource 5 [mem 0xf1000000-0xf1ffffff] [ 0.019324] pci_bus 0000:00: resource 6 [mem 0x90000000-0x9fffffff] [ 0.019336] pci_bus 0001:10: resource 4 [io 0x0000-0x7fffff] [ 0.019346] pci_bus 0001:10: resource 5 [mem 0xf3000000-0xf3ffffff] [ 0.019356] pci_bus 0001:10: resource 6 [mem 0x80000000-0x8fffffff] [ 0.019367] pci_bus 0002:20: resource 4 [io 0xff7fe000-0xffffdfff] [ 0.019378] pci_bus 0002:20: resource 5 [mem 0xf5000000-0xf5ffffff] [ 0.025880] vgaarb: device added: PCI:0000:00:10.0,decodes=io+mem,owns=mem,locks=none [ 0.025925] vgaarb: loaded [ 0.025938] vgaarb: bridge control possible 0000:00:10.0 [ 0.026346] SCSI subsystem initialized [ 0.026546] libata version 3.00 loaded. [ 0.027309] Switched to clocksource timebase [ 0.046749] NET: Registered protocol family 2 [ 0.047990] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.048251] TCP bind hash table entries: 8192 (order: 3, 32768 bytes) [ 0.048487] TCP: Hash tables configured (established 8192 bind 8192) [ 0.049009] TCP: reno registered [ 0.049030] UDP hash table entries: 512 (order: 1, 8192 bytes) [ 0.049107] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes) [ 0.049425] NET: Registered protocol family 1 [ 0.049595] pci 0001:10:18.0: enabling device (0000 -> 0002) [ 0.103389] pci 0001:10:19.0: enabling device (0000 -> 0002) [ 0.159337] PCI: CLS mismatch (32 != 1020), using 32 bytes [ 0.159645] Unpacking initramfs... [ 1.095053] Freeing initrd memory: 13356K (c1500000 - c220b000) [ 1.095780] Thermal assist unit using timers, shrink_timer: 500 jiffies [ 1.096917] futex hash table entries: 256 (order: -1, 3072 bytes) [ 1.097014] audit: initializing netlink subsys (disabled) [ 1.097160] audit: type=2000 audit(1432654282.092:1): initialized [ 1.098346] VFS: Disk quotas dquot_6.5.2 [ 1.098428] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.098568] msgmni has been set to 1251 [ 1.099841] alg: No test for stdrng (krng) [ 1.099960] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.099992] io scheduler noop registered [ 1.100012] io scheduler deadline registered [ 1.100169] io scheduler cfq registered (default) [ 1.100703] radeonfb 0000:00:10.0: enabling device (0086 -> 0087) [ 1.294616] radeonfb 0000:00:10.0: Invalid ROM contents [ 1.294645] radeonfb (0000:00:10.0): Invalid ROM signature 8080 should be 0xaa55 [ 1.303347] radeonfb: Retrieved PLL infos from Open Firmware [ 1.303370] radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=166.00 Mhz, System=166.00 MHz [ 1.303392] radeonfb: PLL min 12000 max 35000 [ 1.400363] i2c i2c-2: unable to read EDID block. [ 1.552349] i2c i2c-2: unable to read EDID block. [ 1.704348] i2c i2c-2: unable to read EDID block. [ 1.856348] i2c i2c-3: unable to read EDID block. [ 2.008352] i2c i2c-3: unable to read EDID block. [ 2.160348] i2c i2c-3: unable to read EDID block. [ 2.275313] radeonfb: Monitor 1 type LCD found [ 2.275328] radeonfb: EDID probed [ 2.275341] radeonfb: Monitor 2 type no found [ 2.287314] radeonfb: Using Firmware dividers 0x0001003a from PPLL 0 [ 2.611312] radeonfb: Dynamic Clock Power Management enabled [ 3.067899] Console: switching to colour frame buffer device 128x48 [ 3.200238] radeonfb: Backlight initialized (radeonbl0) [ 3.200853] radeonfb (0000:00:10.0): ATI Radeon 4c59 "LY" [ 3.202154] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 3.204032] pmac_zilog: 0.6 (Benjamin Herrenschmidt benh@kernel.crashing.org) [ 3.204943] Serial: MPC52xx PSC UART driver [ 3.205537] Generic non-volatile memory driver v1.1 [ 3.206279] Linux agpgart interface v0.103 [ 3.206822] agpgart-uninorth 0000:00:0b.0: Apple UniNorth/Pangea chipset [ 3.210164] agpgart-uninorth 0000:00:0b.0: configuring for size idx: 64 [ 3.211089] agpgart-uninorth 0000:00:0b.0: AGP aperture is 256M @ 0x0 [ 3.212160] MacIO PCI driver attached to Pangea chipset [ 3.214406] 0.00013020:ch-a: ttyPZ0 at MMIO 0x80013020 (irq = 22, base_baud = 230400) is a Z85c30 ESCC - Serial port [ 3.216111] 0.00013000:ch-b: ttyPZ1 at MMIO 0x80013000 (irq = 23, base_baud = 230400) is a Z85c30 ESCC - Serial port [ 3.218661] adb: starting probe task... [ 3.473562] adb devices: [2]: 2 c3 [3]: 3 1 [7]: 7 1f [ 3.480283] ADB keyboard at 2, handler 1 [ 3.480776] Detected ADB keyboard, type ANSI. [ 3.481549] input: ADB keyboard as /devices/virtual/input/input0 [ 3.482459] input: ADB Powerbook buttons as /devices/virtual/input/input1 [ 3.498417] ADB mouse at 3, handler set to 4 (trackpad) [ 3.558440] input: ADB mouse as /devices/virtual/input/input2 [ 3.559120] adb: finished probe task... [ 4.235335] pata-macio 0.0001f000:ata-4: Activating pata-macio chipset KeyLargo ATA-4, Apple bus ID 2 [ 4.237278] scsi0 : pata_macio [ 4.259768] ata1: PATA max UDMA/66 irq 19 [ 4.282443] mousedev: PS/2 mouse device common for all mice [ 4.305519] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0 [ 4.328218] Registering PowerMac CPU frequency driver [ 4.350493] Low: 400 Mhz, High: 700 Mhz, Boot: 700 Mhz [ 4.373142] drop_monitor: Initializing network drop monitor service [ 4.396273] TCP: cubic registered [ 4.419165] NET: Registered protocol family 10 [ 4.442814] mip6: Mobile IPv6 [ 4.465527] NET: Registered protocol family 17 [ 4.488313] Key type dns_resolver registered [ 4.511641] registered taskstats version 1 [ 4.534980] input: PMU as /devices/virtual/input/input3 [ 4.558293] rtc-generic rtc-generic: setting system clock to 2015-05-26 08:31:25 UTC (1432629085) [ 4.582047] PM: Hibernation image not present or could not be loaded. [ 5.218743] ata1.00: ATA-5: TOSHIBA MK3018GAS, Q3.03 B, max UDMA/100 [ 5.242497] ata1.00: 58605120 sectors, multi 16: LBA [ 5.266500] ata1.01: ATAPI: SONY CD-RW CRX800E, 1.3p, max MWDMA2 [ 5.291125] ata1.00: limited to UDMA/33 due to 40-wire cable [ 5.323797] ata1.00: configured for UDMA/33 [ 5.363651] ata1.01: configured for MWDMA2 [ 5.399259] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK3018GA 3 B PQ: 0 ANSI: 5 [ 5.427805] scsi 0:0:1:0: CD-ROM SONY CD-RW CRX800E 1.3p PQ: 0 ANSI: 5 [ 5.456983] Freeing unused kernel memory: 292K (c0568000 - c05b1000) [ 5.589042] systemd-udevd[52]: starting version 215 [ 5.645884] random: systemd-udevd urandom read with 10 bits of entropy available [ 5.799434] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 5.826206] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 5.857326] sungem.c:v1.0 David S. Miller davem@redhat.com [ 5.888329] sd 0:0:0:0: [sda] 58605120 512-byte logical blocks: (30.0 GB/27.9 GiB) [ 5.957056] usbcore: registered new interface driver usbfs [ 6.044089] sd 0:0:0:0: [sda] Write Protect is off [ 6.070911] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.073826] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 6.081876] gem 0002:20:0f.0 eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:03:93:99:74:70 [ 6.112172] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 6.163525] usbcore: registered new interface driver hub [ 6.234764] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.269375] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 6.299225] usbcore: registered new device driver usb [ 6.327509] firewire_ohci 0002:20:0e.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0 [ 6.359250] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 6.402972] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 6.435778] ehci-pci: EHCI PCI platform driver [ 6.467479] ohci-pci: OHCI PCI platform driver [ 6.497504] sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 [ 6.527439] ohci-pci 0001:10:18.0: OHCI PCI host controller [ 6.561342] ohci-pci 0001:10:18.0: new USB bus registered, assigned bus number 1 [ 6.590320] ohci-pci 0001:10:18.0: irq 27, io mem 0x80081000 [ 6.690874] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.719325] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.747832] usb usb1: Product: OHCI PCI host controller [ 6.775962] usb usb1: Manufacturer: Linux 3.16.7-ckt9-custom4 ohci_hcd [ 6.804083] usb usb1: SerialNumber: 0001:10:18.0 [ 6.836390] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.864703] firewire_core 0002:20:0e.0: created device fw0: GUID 000393fffe997470, S400 [ 6.895663] hub 1-0:1.0: USB hub found [ 6.941286] hub 1-0:1.0: 2 ports detected [ 6.970432] ohci-pci 0001:10:19.0: OHCI PCI host controller [ 6.999490] ohci-pci 0001:10:19.0: new USB bus registered, assigned bus number 2 [ 7.028746] ohci-pci 0001:10:19.0: irq 28, io mem 0x80080000 [ 7.130803] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 7.159799] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.188417] usb usb2: Product: OHCI PCI host controller [ 7.216524] usb usb2: Manufacturer: Linux 3.16.7-ckt9-custom4 ohci_hcd [ 7.244807] usb usb2: SerialNumber: 0001:10:19.0 [ 7.274070] hub 2-0:1.0: USB hub found [ 7.301995] hub 2-0:1.0: 2 ports detected [ 9.278050] random: nonblocking pool is initialized [ 9.437900] PM: Starting manual resume from disk [ 9.466024] PM: Hibernation image partition 8:12 present [ 9.466030] PM: Looking for hibernation image. [ 9.484138] PM: Image not found (code -22) [ 9.484145] PM: Hibernation image not present or could not be loaded. [ 10.043383] EXT4-fs (sda13): mounted filesystem with ordered data mode. Opts: (null) [ 11.328636] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) [ 11.386327] systemd[1]: Detected architecture 'ppc'. [ 11.901558] systemd[1]: Inserted module 'autofs4' [ 11.947070] systemd[1]: Set hostname to <icebook>. [ 14.332031] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. [ 14.359820] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 14.387139] systemd[1]: Starting Remote File Systems (Pre). [ 14.442531] systemd[1]: Reached target Remote File Systems (Pre). [ 14.469678] systemd[1]: Starting Encrypted Volumes. [ 14.523970] systemd[1]: Reached target Encrypted Volumes. [ 14.550995] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. [ 14.578595] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 14.606144] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. [ 14.662903] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 14.691707] systemd[1]: Expecting device dev-disk-by\x2duuid-fdb8f9e3\x2d2abb\x2d4f68\x2d9cb4\x2d72f0c40f6585.device... [ 14.750611] systemd[1]: Expecting device dev-sda10.device... [ 14.810285] systemd[1]: Expecting device dev-sda11.device... [ 14.871165] systemd[1]: Starting Root Slice. [ 14.931020] systemd[1]: Created slice Root Slice. [ 14.960615] systemd[1]: Starting User and Session Slice. [ 15.021058] systemd[1]: Created slice User and Session Slice. [ 15.050894] systemd[1]: Starting Delayed Shutdown Socket. [ 15.111485] systemd[1]: Listening on Delayed Shutdown Socket. [ 15.141757] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ 15.203242] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 15.233664] systemd[1]: Starting Journal Socket (/dev/log). [ 15.294099] systemd[1]: Listening on Journal Socket (/dev/log). [ 15.324174] systemd[1]: Starting udev Control Socket. [ 15.383968] systemd[1]: Listening on udev Control Socket. [ 15.413310] systemd[1]: Starting udev Kernel Socket. [ 15.472461] systemd[1]: Listening on udev Kernel Socket. [ 15.501435] systemd[1]: Starting Journal Socket. [ 15.558075] systemd[1]: Listening on Journal Socket. [ 15.586272] systemd[1]: Starting System Slice. [ 15.642931] systemd[1]: Created slice System Slice. [ 15.671160] systemd[1]: Started File System Check on Root Device. [ 15.699558] systemd[1]: Starting system-getty.slice. [ 15.756320] systemd[1]: Created slice system-getty.slice. [ 15.784499] systemd[1]: Starting Increase datagram queue length... [ 15.844624] systemd[1]: Mounting Debug File System... [ 15.910863] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 15.982042] systemd[1]: Mounted Huge Pages File System. [ 16.016276] systemd[1]: Starting udev Coldplug all Devices... [ 16.195035] systemd[1]: Starting Load Kernel Modules... [ 16.322821] systemd[1]: Started Set Up Additional Binary Formats. [ 16.350340] systemd[1]: Mounting POSIX Message Queue File System... [ 16.408802] systemd[1]: Starting Slices. [ 16.486160] systemd[1]: Reached target Slices. [ 16.565115] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 16.665299] systemd[1]: Starting Create Static Device Nodes in /dev... [ 16.782196] systemd[1]: Started udev Coldplug all Devices. [ 16.825486] lp: driver loaded but no devices found [ 16.928456] fuse init (API version 7.23) [ 17.153889] systemd[1]: Started Increase datagram queue length. [ 17.210814] systemd[1]: Mounted Debug File System. [ 17.267416] systemd[1]: Mounted POSIX Message Queue File System. [ 17.334588] systemd[1]: Starting Syslog Socket. [ 17.390102] systemd[1]: Listening on Syslog Socket. [ 17.417807] systemd[1]: Starting Journal Service... [ 17.508394] systemd[1]: Started Journal Service. [ 17.712676] cfg80211: Calling CRDA to update world regulatory domain [ 17.809342] orinoco 0.15 (David Gibson hermes@gibson.dropbear.id.au, Pavel Roskin proski@gnu.org, et al) [ 17.840427] airport 0.15 (Benjamin Herrenschmidt benh@kernel.crashing.org) [ 17.840540] airport: Physical address 80030000 [ 18.187799] systemd-udevd[144]: starting version 215 [ 19.044415] airport 0.00030000:radio: Hardware identity 0005:0001:0001:0002 [ 19.071780] airport 0.00030000:radio: Station identity 001f:0001:0008:0046 [ 19.098532] airport 0.00030000:radio: Firmware determined as Lucent/Agere 8.70 [ 19.263133] airport 0.00030000:radio: firmware: direct-loading firmware agere_sta_fw.bin [ 19.377069] airport 0.00030000:radio: Hardware identity 0005:0001:0001:0002 [ 19.403544] airport 0.00030000:radio: Station identity 001f:0002:0009:0030 [ 19.429104] airport 0.00030000:radio: Firmware determined as Lucent/Agere 9.48 [ 19.454303] airport 0.00030000:radio: Ad-hoc demo mode supported [ 19.479373] airport 0.00030000:radio: IEEE standard IBSS ad-hoc mode supported [ 19.504417] airport 0.00030000:radio: WEP supported, 104-bit key [ 19.529230] airport 0.00030000:radio: WPA-PSK supported [ 20.456095] PowerMac i2c bus pmu 2 registered [ 20.481449] PowerMac i2c bus pmu 1 registered [ 20.507471] PowerMac i2c bus mac-io 0 registered [ 20.531659] i2c i2c-6: No i2c address for /pci@f2000000/mac-io@17/i2c@18000/i2c-modem [ 20.561860] PowerMac i2c bus uni-n 1 registered [ 20.596036] i2c i2c-7: i2c-powermac: modalias failure on /uni-n@f8000000/i2c@f8001000/cereal@1c0 [ 20.623810] PowerMac i2c bus uni-n 0 registered [ 21.067085] input: PowerMac Beep as /devices/pci0001:10/0001:10:17.0/input/input4 [ 22.274630] [drm] Initialized drm 1.1.0 20060810 [ 24.092092] [drm] VGACON disable radeon kernel modesetting. [ 24.115993] [drm:radeon_init] *ERROR* No UMS support in radeon module! [ 24.361299] EXT4-fs (sda13): re-mounted. Opts: errors=remount-ro [ 24.940172] cfg80211: World regulatory domain updated: [ 24.940188] cfg80211: DFS Master region: unset [ 24.940189] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 24.940206] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 24.940212] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 24.940217] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 24.940225] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 24.940232] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 24.940238] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 24.940244] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 24.940249] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 27.106633] Adding 374996k swap on /dev/sda12. Priority:-1 extents:1 across:374996k [ 27.168400] hfsplus: Filesystem was not cleanly unmounted, running fsck.hfsplus is recommended. mounting read-only. [ 27.262970] hfsplus: Filesystem was not cleanly unmounted, running fsck.hfsplus is recommended. mounting read-only. [ 27.835464] systemd-journald[141]: Received request to flush runtime journal from PID 1 [ 29.127671] sungem_phy: PHY ID: 4061e4, addr: 0 [ 29.128024] gem 0002:20:0f.0 eth0: Found BCM5221 PHY [ 29.128322] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 31.465846] RPC: Registered named UNIX socket transport module. [ 31.468756] RPC: Registered udp transport module. [ 31.471433] RPC: Registered tcp transport module. [ 31.474051] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 31.535202] FS-Cache: Loaded [ 31.537910] gem 0002:20:0f.0 eth0: Link is up at 100 Mbps, full-duplex [ 31.540937] gem 0002:20:0f.0 eth0: Pause is disabled [ 31.545855] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 31.640991] FS-Cache: Netfs 'nfs' registered for caching [ 31.807108] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 36.063021] input: Mouseemu virtual keyboard as /devices/virtual/input/input5 [ 36.079404] input: Mouseemu virtual mouse as /devices/virtual/input/input6 [ 48.860034] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
On Thu, May 28, 2015 at 09:33:27AM +0200, Takashi Iwai wrote:
At Tue, 26 May 2015 02:19:34 -0700, Dan DeVoto wrote:
Hi,
I applied this patch ("check if DEQ was already instantiated") on top of "sound: ppc: keywest: drop using attach adapter" and sound works great. Everything works as expected. Below is my dmesg output.
Very well, shall I merge the patch as is?
Yes, with Dan's tested-by. This patch should get its testing cycle via linux-next. If no regressions, then it could be considered to send this patch (and the one it depends on) to stable. They will fix missing sound issues which regressed ~3 years ago. I'll leave this to you, of course.
At Fri, 29 May 2015 19:50:22 +0900, Wolfram Sang wrote:
On Thu, May 28, 2015 at 09:33:27AM +0200, Takashi Iwai wrote:
At Tue, 26 May 2015 02:19:34 -0700, Dan DeVoto wrote:
Hi,
I applied this patch ("check if DEQ was already instantiated") on top of "sound: ppc: keywest: drop using attach adapter" and sound works great. Everything works as expected. Below is my dmesg output.
Very well, shall I merge the patch as is?
Yes, with Dan's tested-by. This patch should get its testing cycle via linux-next. If no regressions, then it could be considered to send this patch (and the one it depends on) to stable. They will fix missing sound issues which regressed ~3 years ago. I'll leave this to you, of course.
OK, I queued it to for-next branch. Since these are for 4.2 material, I'll give stable requests once when merged to Linus tree.
Do you think from which stable kernel version can this be applied?
thanks,
Takashi
Do you think from which stable kernel version can this be applied?
The offending commit is 3a3dd0186f619b74e61e6f29dddcaf59af7d3cac ("i2c/powermac: Improve detection of devices from device-tree") which came in with v3.6 if I read correctly.
At Fri, 29 May 2015 20:06:09 +0900, Wolfram Sang wrote:
Do you think from which stable kernel version can this be applied?
The offending commit is 3a3dd0186f619b74e61e6f29dddcaf59af7d3cac ("i2c/powermac: Improve detection of devices from device-tree") which came in with v3.6 if I read correctly.
OK, thanks!
Takashi
On Fri, May 29, 2015 at 01:44:38PM +0200, Takashi Iwai wrote:
At Fri, 29 May 2015 20:06:09 +0900, Wolfram Sang wrote:
Do you think from which stable kernel version can this be applied?
The offending commit is 3a3dd0186f619b74e61e6f29dddcaf59af7d3cac ("i2c/powermac: Improve detection of devices from device-tree") which came in with v3.6 if I read correctly.
OK, thanks!
Just to make sure: Keep in mind that it depends on "sound: ppc: keywest: drop using attach adapter" which needs to go to stable, then, too.
participants (3)
-
Dan DeVoto -
Takashi Iwai -
Wolfram Sang