[alsa-devel] [PATCH 0/9] ASoC/ARM: Merge the davinci and omap audio directories
Hi,
Changes since RFC: - Added Jarkko's Acked-by/Tested-by for the {omap->ti} changes - Rebased on top of next-20181210 (20181214+ is not booting on any of my boards)
For Texas Instruments audio support we have two directories at the moment: davinci omap
In reality TI have the following SoC lines supported by Linux: daVinci OMAP Sitara Keystone
We already needed to have cross directory 'links' for DRA7x/AM5 since they use McASP (davinci directory) and sDMA (omap directory). Keystone II line of SoCs are using drivers from davinci directory (McASP and EDMA). Which is kind of fine as they are in the same place.
With the new AM654 (http://www.ti.com/lit/pdf/spruid7) we will have completely new DMA and there is no place to put that as it does not belong under davinci or omap, but it makes no sense to create yet another TI related directory just for the small udma-pcm.
Another issue with the current support is how the Kconfigs are written. The DAI drivers are depending on the ASoC platform drivers and it is a bit of a mess at the moment. For simple-sound-card one need to know what DMA is used and then select the DAI driver (if the Kconfig is right). I have also cleaned up the Kconfig prompts and comments a bit to be more precise.
As can be seen in the diffstat I tried to do the merger with minimal code change, resisting the urge to rename the davinci-i2c driver to davinci-asp.
With the merger I have created a new Kconfig structure: - Submenu for TI related settings for clarity - Only the DAI drivers are selectable and the platform drivers are selected based on the available (enabled) DMA engines - The remaining ASoC machine drivers are selecting the DAIs they need - The davinci-evm is now a single entry, combining all the various daVinci EVMS it supports and selects the needed DAIs based on the enabled boards
The series also includes patches to updated the arch/arm/ files (defconfigs, source files using audio Kconfig symbols).
I think I have catched all (I hope) issues regarding to Kconfig thanks to the various autobuild machines out there kindly testing my linux-next-wip branch.
Mark, Tony, Sekhar: This series - as I mentioned - is based on next-20181210. Not sure what tag, branch, commit I should base this, but I can resend v2 if needed.
Regards, Peter --- Peter Ujfalusi (9): ASoC: ti: Merge davinci and omap directories MAINTAINERS: Add entry for sound/soc/ti and update the OMAP audio support ARM: OMAP1: Makefile: Update for new MCBSP Kconfig option ARM: OMAP2: Update for new MCBSP Kconfig option ARM: davinci: dm365-evm: Update for the new ASoC Kcofnig options ARM: omap2plus_defconfig: Update the audio options ARM: omap1_defconfig: Do not select ASoC by default ARM: davinci_all_defconfig: Update the audio options ASoC: ti: Kconfig: Remove the deprecated options
MAINTAINERS | 11 +- arch/arm/configs/davinci_all_defconfig | 5 +- arch/arm/configs/omap1_defconfig | 2 - arch/arm/configs/omap2plus_defconfig | 14 +- arch/arm/mach-davinci/board-dm365-evm.c | 4 +- arch/arm/mach-omap1/Makefile | 2 +- arch/arm/mach-omap2/Makefile | 2 +- arch/arm/mach-omap2/pdata-quirks.c | 4 +- sound/soc/Kconfig | 3 +- sound/soc/Makefile | 3 +- sound/soc/davinci/Kconfig | 106 --------- sound/soc/davinci/Makefile | 16 -- sound/soc/omap/Kconfig | 120 ---------- sound/soc/omap/Makefile | 30 --- sound/soc/ti/Kconfig | 209 ++++++++++++++++++ sound/soc/ti/Makefile | 44 ++++ sound/soc/{omap => ti}/ams-delta.c | 0 sound/soc/{davinci => ti}/davinci-evm.c | 4 +- sound/soc/{davinci => ti}/davinci-i2s.c | 0 sound/soc/{davinci => ti}/davinci-i2s.h | 0 sound/soc/{davinci => ti}/davinci-mcasp.c | 14 +- sound/soc/{davinci => ti}/davinci-mcasp.h | 0 sound/soc/{davinci => ti}/davinci-vcif.c | 0 sound/soc/{davinci => ti}/edma-pcm.c | 0 sound/soc/{davinci => ti}/edma-pcm.h | 4 +- sound/soc/{omap => ti}/n810.c | 0 sound/soc/{omap => ti}/omap-abe-twl6040.c | 0 sound/soc/{omap => ti}/omap-dmic.c | 0 sound/soc/{omap => ti}/omap-dmic.h | 0 .../omap-hdmi-audio.c => ti/omap-hdmi.c} | 0 sound/soc/{omap => ti}/omap-mcbsp-priv.h | 0 sound/soc/{omap => ti}/omap-mcbsp-st.c | 0 sound/soc/{omap => ti}/omap-mcbsp.c | 0 sound/soc/{omap => ti}/omap-mcbsp.h | 0 sound/soc/{omap => ti}/omap-mcpdm.c | 0 sound/soc/{omap => ti}/omap-mcpdm.h | 0 sound/soc/{omap => ti}/omap-twl4030.c | 0 sound/soc/{omap => ti}/omap3pandora.c | 0 sound/soc/{omap => ti}/osk5912.c | 0 sound/soc/{omap => ti}/rx51.c | 0 sound/soc/{omap => ti}/sdma-pcm.c | 0 sound/soc/{omap => ti}/sdma-pcm.h | 4 +- 42 files changed, 294 insertions(+), 307 deletions(-) delete mode 100644 sound/soc/davinci/Kconfig delete mode 100644 sound/soc/davinci/Makefile delete mode 100644 sound/soc/omap/Kconfig delete mode 100644 sound/soc/omap/Makefile create mode 100644 sound/soc/ti/Kconfig create mode 100644 sound/soc/ti/Makefile rename sound/soc/{omap => ti}/ams-delta.c (100%) rename sound/soc/{davinci => ti}/davinci-evm.c (99%) rename sound/soc/{davinci => ti}/davinci-i2s.c (100%) rename sound/soc/{davinci => ti}/davinci-i2s.h (100%) rename sound/soc/{davinci => ti}/davinci-mcasp.c (99%) rename sound/soc/{davinci => ti}/davinci-mcasp.h (100%) rename sound/soc/{davinci => ti}/davinci-vcif.c (100%) rename sound/soc/{davinci => ti}/edma-pcm.c (100%) rename sound/soc/{davinci => ti}/edma-pcm.h (91%) rename sound/soc/{omap => ti}/n810.c (100%) rename sound/soc/{omap => ti}/omap-abe-twl6040.c (100%) rename sound/soc/{omap => ti}/omap-dmic.c (100%) rename sound/soc/{omap => ti}/omap-dmic.h (100%) rename sound/soc/{omap/omap-hdmi-audio.c => ti/omap-hdmi.c} (100%) rename sound/soc/{omap => ti}/omap-mcbsp-priv.h (100%) rename sound/soc/{omap => ti}/omap-mcbsp-st.c (100%) rename sound/soc/{omap => ti}/omap-mcbsp.c (100%) rename sound/soc/{omap => ti}/omap-mcbsp.h (100%) rename sound/soc/{omap => ti}/omap-mcpdm.c (100%) rename sound/soc/{omap => ti}/omap-mcpdm.h (100%) rename sound/soc/{omap => ti}/omap-twl4030.c (100%) rename sound/soc/{omap => ti}/omap3pandora.c (100%) rename sound/soc/{omap => ti}/osk5912.c (100%) rename sound/soc/{omap => ti}/rx51.c (100%) rename sound/soc/{omap => ti}/sdma-pcm.c (100%) rename sound/soc/{omap => ti}/sdma-pcm.h (85%)
Create new directory to contain all Texas Instruments specific DAI, platform and machine drivers instead of scattering them under davinci and omap directories.
There is already inter dependency between the two directories becasue of McASP (on dra7x it is serviced by sDMA, not EDMA).
With the upcoming AM654 we will need to introduce new platform driver for UDMA and it does not fit under davinci, nor under omap.
With the move I have restructured the Kconfig to be more usable in the era of simple-sound-card: CPU DAIs can be selected individually and they will select the platform driver they can be served with.
To avoid breakage, I have moved over deprecated Kconfig options so defconfig builds will work without regression.
Signed-off-by: Peter Ujfalusi peter.ujfalusi@ti.com For sound/soc/{omap => ti}: Tested-by: Jarkko Nikula jarkko.nikula@bitmer.com Acked-by: Jarkko Nikula jarkko.nikula@bitmer.com --- sound/soc/Kconfig | 3 +- sound/soc/Makefile | 3 +- sound/soc/davinci/Kconfig | 106 ----- sound/soc/davinci/Makefile | 16 - sound/soc/omap/Kconfig | 120 ------ sound/soc/omap/Makefile | 30 -- sound/soc/ti/Kconfig | 368 ++++++++++++++++++ sound/soc/ti/Makefile | 44 +++ sound/soc/{omap => ti}/ams-delta.c | 0 sound/soc/{davinci => ti}/davinci-evm.c | 4 +- sound/soc/{davinci => ti}/davinci-i2s.c | 0 sound/soc/{davinci => ti}/davinci-i2s.h | 0 sound/soc/{davinci => ti}/davinci-mcasp.c | 14 +- sound/soc/{davinci => ti}/davinci-mcasp.h | 0 sound/soc/{davinci => ti}/davinci-vcif.c | 0 sound/soc/{davinci => ti}/edma-pcm.c | 0 sound/soc/{davinci => ti}/edma-pcm.h | 4 +- sound/soc/{omap => ti}/n810.c | 0 sound/soc/{omap => ti}/omap-abe-twl6040.c | 0 sound/soc/{omap => ti}/omap-dmic.c | 0 sound/soc/{omap => ti}/omap-dmic.h | 0 .../omap-hdmi-audio.c => ti/omap-hdmi.c} | 0 sound/soc/{omap => ti}/omap-mcbsp-priv.h | 0 sound/soc/{omap => ti}/omap-mcbsp-st.c | 0 sound/soc/{omap => ti}/omap-mcbsp.c | 0 sound/soc/{omap => ti}/omap-mcbsp.h | 0 sound/soc/{omap => ti}/omap-mcpdm.c | 0 sound/soc/{omap => ti}/omap-mcpdm.h | 0 sound/soc/{omap => ti}/omap-twl4030.c | 0 sound/soc/{omap => ti}/omap3pandora.c | 0 sound/soc/{omap => ti}/osk5912.c | 0 sound/soc/{omap => ti}/rx51.c | 0 sound/soc/{omap => ti}/sdma-pcm.c | 0 sound/soc/{omap => ti}/sdma-pcm.h | 4 +- 34 files changed, 427 insertions(+), 289 deletions(-) delete mode 100644 sound/soc/davinci/Kconfig delete mode 100644 sound/soc/davinci/Makefile delete mode 100644 sound/soc/omap/Kconfig delete mode 100644 sound/soc/omap/Makefile create mode 100644 sound/soc/ti/Kconfig create mode 100644 sound/soc/ti/Makefile rename sound/soc/{omap => ti}/ams-delta.c (100%) rename sound/soc/{davinci => ti}/davinci-evm.c (99%) rename sound/soc/{davinci => ti}/davinci-i2s.c (100%) rename sound/soc/{davinci => ti}/davinci-i2s.h (100%) rename sound/soc/{davinci => ti}/davinci-mcasp.c (99%) rename sound/soc/{davinci => ti}/davinci-mcasp.h (100%) rename sound/soc/{davinci => ti}/davinci-vcif.c (100%) rename sound/soc/{davinci => ti}/edma-pcm.c (100%) rename sound/soc/{davinci => ti}/edma-pcm.h (91%) rename sound/soc/{omap => ti}/n810.c (100%) rename sound/soc/{omap => ti}/omap-abe-twl6040.c (100%) rename sound/soc/{omap => ti}/omap-dmic.c (100%) rename sound/soc/{omap => ti}/omap-dmic.h (100%) rename sound/soc/{omap/omap-hdmi-audio.c => ti/omap-hdmi.c} (100%) rename sound/soc/{omap => ti}/omap-mcbsp-priv.h (100%) rename sound/soc/{omap => ti}/omap-mcbsp-st.c (100%) rename sound/soc/{omap => ti}/omap-mcbsp.c (100%) rename sound/soc/{omap => ti}/omap-mcbsp.h (100%) rename sound/soc/{omap => ti}/omap-mcpdm.c (100%) rename sound/soc/{omap => ti}/omap-mcpdm.h (100%) rename sound/soc/{omap => ti}/omap-twl4030.c (100%) rename sound/soc/{omap => ti}/omap3pandora.c (100%) rename sound/soc/{omap => ti}/osk5912.c (100%) rename sound/soc/{omap => ti}/rx51.c (100%) rename sound/soc/{omap => ti}/sdma-pcm.c (100%) rename sound/soc/{omap => ti}/sdma-pcm.h (85%)
diff --git a/sound/soc/Kconfig b/sound/soc/Kconfig index 1cf11cf51e1d..76c62ef5e0b9 100644 --- a/sound/soc/Kconfig +++ b/sound/soc/Kconfig @@ -46,13 +46,11 @@ source "sound/soc/atmel/Kconfig" source "sound/soc/au1x/Kconfig" source "sound/soc/bcm/Kconfig" source "sound/soc/cirrus/Kconfig" -source "sound/soc/davinci/Kconfig" source "sound/soc/dwc/Kconfig" source "sound/soc/fsl/Kconfig" source "sound/soc/hisilicon/Kconfig" source "sound/soc/jz4740/Kconfig" source "sound/soc/nuc900/Kconfig" -source "sound/soc/omap/Kconfig" source "sound/soc/kirkwood/Kconfig" source "sound/soc/img/Kconfig" source "sound/soc/intel/Kconfig" @@ -70,6 +68,7 @@ source "sound/soc/sti/Kconfig" source "sound/soc/stm/Kconfig" source "sound/soc/sunxi/Kconfig" source "sound/soc/tegra/Kconfig" +source "sound/soc/ti/Kconfig" source "sound/soc/txx9/Kconfig" source "sound/soc/uniphier/Kconfig" source "sound/soc/ux500/Kconfig" diff --git a/sound/soc/Makefile b/sound/soc/Makefile index 62a5f87c3cfc..e73fd934d300 100644 --- a/sound/soc/Makefile +++ b/sound/soc/Makefile @@ -30,7 +30,6 @@ obj-$(CONFIG_SND_SOC) += atmel/ obj-$(CONFIG_SND_SOC) += au1x/ obj-$(CONFIG_SND_SOC) += bcm/ obj-$(CONFIG_SND_SOC) += cirrus/ -obj-$(CONFIG_SND_SOC) += davinci/ obj-$(CONFIG_SND_SOC) += dwc/ obj-$(CONFIG_SND_SOC) += fsl/ obj-$(CONFIG_SND_SOC) += hisilicon/ @@ -41,7 +40,6 @@ obj-$(CONFIG_SND_SOC) += mediatek/ obj-$(CONFIG_SND_SOC) += meson/ obj-$(CONFIG_SND_SOC) += mxs/ obj-$(CONFIG_SND_SOC) += nuc900/ -obj-$(CONFIG_SND_SOC) += omap/ obj-$(CONFIG_SND_SOC) += kirkwood/ obj-$(CONFIG_SND_SOC) += pxa/ obj-$(CONFIG_SND_SOC) += qcom/ @@ -54,6 +52,7 @@ obj-$(CONFIG_SND_SOC) += sti/ obj-$(CONFIG_SND_SOC) += stm/ obj-$(CONFIG_SND_SOC) += sunxi/ obj-$(CONFIG_SND_SOC) += tegra/ +obj-$(CONFIG_SND_SOC) += ti/ obj-$(CONFIG_SND_SOC) += txx9/ obj-$(CONFIG_SND_SOC) += uniphier/ obj-$(CONFIG_SND_SOC) += ux500/ diff --git a/sound/soc/davinci/Kconfig b/sound/soc/davinci/Kconfig deleted file mode 100644 index 778faff28e0e..000000000000 --- a/sound/soc/davinci/Kconfig +++ /dev/null @@ -1,106 +0,0 @@ -config SND_DAVINCI_SOC - tristate - depends on ARCH_DAVINCI - select SND_EDMA_SOC - -config SND_EDMA_SOC - tristate "SoC Audio for Texas Instruments chips using eDMA" - depends on TI_EDMA - select SND_SOC_GENERIC_DMAENGINE_PCM - help - Say Y or M here if you want audio support for TI SoC which uses eDMA. - The following line of SoCs are supported by this platform driver: - - daVinci devices - - AM335x - - AM437x/AM438x - - DRA7xx family - -config SND_DAVINCI_SOC_I2S - tristate "DaVinci Multichannel Buffered Serial Port (McBSP) support" - depends on SND_EDMA_SOC - help - Say Y or M here if you want to have support for McBSP IP found in - Texas Instruments DaVinci DA850 SoCs. - -config SND_DAVINCI_SOC_MCASP - tristate "Multichannel Audio Serial Port (McASP) support" - depends on SND_SDMA_SOC || SND_EDMA_SOC - help - Say Y or M here if you want to have support for McASP IP found in - various Texas Instruments SoCs like: - - daVinci devices - - Sitara line of SoCs (AM335x, AM438x, etc) - - DRA7x devices - -config SND_DAVINCI_SOC_VCIF - tristate - -config SND_DAVINCI_SOC_GENERIC_EVM - tristate - select SND_SOC_TLV320AIC3X - select SND_DAVINCI_SOC_MCASP - -config SND_AM33XX_SOC_EVM - tristate "SoC Audio for the AM33XX chip based boards" - depends on SND_EDMA_SOC && SOC_AM33XX && I2C - select SND_DAVINCI_SOC_GENERIC_EVM - help - Say Y or M if you want to add support for SoC audio on AM33XX - boards using McASP and TLV320AIC3X codec. For example AM335X-EVM, - AM335X-EVMSK, and BeagelBone with AudioCape boards have this - setup. - -config SND_DAVINCI_SOC_EVM - tristate "SoC Audio support for DaVinci DM6446, DM355 or DM365 EVM" - depends on SND_EDMA_SOC && I2C - depends on MACH_DAVINCI_EVM || MACH_DAVINCI_DM355_EVM || MACH_DAVINCI_DM365_EVM - select SND_DAVINCI_SOC_GENERIC_EVM - help - Say Y if you want to add support for SoC audio on TI - DaVinci DM6446, DM355 or DM365 EVM platforms. - -choice - prompt "DM365 codec select" - depends on SND_DAVINCI_SOC_EVM - depends on MACH_DAVINCI_DM365_EVM - -config SND_DM365_AIC3X_CODEC - tristate "Audio Codec - AIC3101" - help - Say Y if you want to add support for AIC3101 audio codec - -config SND_DM365_VOICE_CODEC - tristate "Voice Codec - CQ93VC" - select MFD_DAVINCI_VOICECODEC - select SND_DAVINCI_SOC_VCIF - select SND_SOC_CQ0093VC - help - Say Y if you want to add support for SoC On-chip voice codec -endchoice - -config SND_DM6467_SOC_EVM - tristate "SoC Audio support for DaVinci DM6467 EVM" - depends on SND_EDMA_SOC && MACH_DAVINCI_DM6467_EVM && I2C - select SND_DAVINCI_SOC_GENERIC_EVM - select SND_SOC_SPDIF - - help - Say Y if you want to add support for SoC audio on TI - -config SND_DA830_SOC_EVM - tristate "SoC Audio support for DA830/OMAP-L137 EVM" - depends on SND_EDMA_SOC && MACH_DAVINCI_DA830_EVM && I2C - select SND_DAVINCI_SOC_GENERIC_EVM - - help - Say Y if you want to add support for SoC audio on TI - DA830/OMAP-L137 EVM - -config SND_DA850_SOC_EVM - tristate "SoC Audio support for DA850/OMAP-L138 EVM" - depends on SND_EDMA_SOC && MACH_DAVINCI_DA850_EVM && I2C - select SND_DAVINCI_SOC_GENERIC_EVM - help - Say Y if you want to add support for SoC audio on TI - DA850/OMAP-L138 EVM - diff --git a/sound/soc/davinci/Makefile b/sound/soc/davinci/Makefile deleted file mode 100644 index 23c6592eb31a..000000000000 --- a/sound/soc/davinci/Makefile +++ /dev/null @@ -1,16 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# DAVINCI Platform Support -snd-soc-edma-objs := edma-pcm.o -snd-soc-davinci-i2s-objs := davinci-i2s.o -snd-soc-davinci-mcasp-objs:= davinci-mcasp.o -snd-soc-davinci-vcif-objs:= davinci-vcif.o - -obj-$(CONFIG_SND_EDMA_SOC) += snd-soc-edma.o -obj-$(CONFIG_SND_DAVINCI_SOC_I2S) += snd-soc-davinci-i2s.o -obj-$(CONFIG_SND_DAVINCI_SOC_MCASP) += snd-soc-davinci-mcasp.o -obj-$(CONFIG_SND_DAVINCI_SOC_VCIF) += snd-soc-davinci-vcif.o - -# Generic DAVINCI/AM33xx Machine Support -snd-soc-evm-objs := davinci-evm.o - -obj-$(CONFIG_SND_DAVINCI_SOC_GENERIC_EVM) += snd-soc-evm.o diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig deleted file mode 100644 index 3d418482d242..000000000000 --- a/sound/soc/omap/Kconfig +++ /dev/null @@ -1,120 +0,0 @@ -config SND_OMAP_SOC - tristate "SoC Audio for Texas Instruments OMAP chips (deprecated)" - depends on (ARCH_OMAP && DMA_OMAP) || (ARM && COMPILE_TEST) - select SND_SDMA_SOC - -config SND_SDMA_SOC - tristate "SoC Audio for Texas Instruments chips using sDMA" - depends on DMA_OMAP || COMPILE_TEST - select SND_SOC_GENERIC_DMAENGINE_PCM - -config SND_OMAP_SOC_DMIC - tristate - -config SND_OMAP_SOC_MCBSP - tristate - -config SND_OMAP_SOC_MCPDM - tristate - -config SND_OMAP_SOC_HDMI_AUDIO - tristate "HDMI audio support for OMAP4+ based SoCs" - depends on SND_SDMA_SOC - help - For HDMI audio to work OMAPDSS HDMI support should be - enabled. - The hdmi audio driver implements cpu-dai component using the - callbacks provided by OMAPDSS and registers the component - under DSS HDMI device. Omap-pcm is registered for platform - component also under DSS HDMI device. Dummy codec is used as - as codec component. The hdmi audio driver implements also - the card and registers it under its own platform device. - The device for the driver is registered by OMAPDSS hdmi - driver. - -config SND_OMAP_SOC_N810 - tristate "SoC Audio support for Nokia N810" - depends on SND_SDMA_SOC && MACH_NOKIA_N810 && I2C - select SND_OMAP_SOC_MCBSP - select SND_SOC_TLV320AIC3X - help - Say Y if you want to add support for SoC audio on Nokia N810. - -config SND_OMAP_SOC_RX51 - tristate "SoC Audio support for Nokia N900 (RX-51)" - depends on SND_SDMA_SOC && ARM && I2C - select SND_OMAP_SOC_MCBSP - select SND_SOC_TLV320AIC3X - select SND_SOC_TPA6130A2 - depends on GPIOLIB - help - Say Y if you want to add support for SoC audio on Nokia N900 - cellphone. - -config SND_OMAP_SOC_AMS_DELTA - tristate "SoC Audio support for Amstrad E3 (Delta) videophone" - depends on SND_SDMA_SOC && MACH_AMS_DELTA && TTY - select SND_OMAP_SOC_MCBSP - select SND_SOC_CX20442 - help - Say Y if you want to add support for SoC audio device connected to - a handset and a speakerphone found on Amstrad E3 (Delta) videophone. - - Note that in order to get those devices fully supported, you have to - build the kernel with standard serial port driver included and - configured for at least 4 ports. Then, from userspace, you must load - a line discipline #19 on the modem (ttyS3) serial line. The simplest - way to achieve this is to install util-linux-ng and use the included - ldattach utility. This can be started automatically from udev, - a simple rule like this one should do the trick (it does for me): - ACTION=="add", KERNEL=="controlC0", \ - RUN+="/usr/sbin/ldattach 19 /dev/ttyS3" - -config SND_OMAP_SOC_OSK5912 - tristate "SoC Audio support for omap osk5912" - depends on SND_SDMA_SOC && MACH_OMAP_OSK && I2C - select SND_OMAP_SOC_MCBSP - select SND_SOC_TLV320AIC23_I2C - help - Say Y if you want to add support for SoC audio on osk5912. - -config SND_OMAP_SOC_OMAP_TWL4030 - tristate "SoC Audio support for TI SoC based boards with twl4030 codec" - depends on TWL4030_CORE && SND_SDMA_SOC - select SND_OMAP_SOC_MCBSP - select SND_SOC_TWL4030 - help - Say Y if you want to add support for SoC audio on TI SoC based boards - using twl4030 as c codec. This driver currently supports: - - Beagleboard or Devkit8000 - - Gumstix Overo or CompuLab CM-T35/CM-T3730 - - IGEP v2 - - OMAP3EVM - - SDP3430 - - Zoom2 - -config SND_OMAP_SOC_OMAP_ABE_TWL6040 - tristate "SoC Audio support for OMAP boards using ABE and twl6040 codec" - depends on TWL6040_CORE && SND_SDMA_SOC && COMMON_CLK - depends on ARCH_OMAP4 || (SOC_OMAP5 && MFD_PALMAS) || COMPILE_TEST - select SND_OMAP_SOC_DMIC - select SND_OMAP_SOC_MCPDM - select SND_SOC_TWL6040 - select SND_SOC_DMIC - select COMMON_CLK_PALMAS if (SOC_OMAP5 && MFD_PALMAS) - select CLK_TWL6040 - help - Say Y if you want to add support for SoC audio on OMAP boards using - ABE and twl6040 codec. This driver currently supports: - - SDP4430/Blaze boards - - PandaBoard (4430) - - PandaBoardES (4460) - - omap5-uevm (5432) - -config SND_OMAP_SOC_OMAP3_PANDORA - tristate "SoC Audio support for OMAP3 Pandora" - depends on TWL4030_CORE && SND_SDMA_SOC && MACH_OMAP3_PANDORA - select SND_OMAP_SOC_MCBSP - select SND_SOC_TWL4030 - help - Say Y if you want to add support for SoC audio on the OMAP3 Pandora. diff --git a/sound/soc/omap/Makefile b/sound/soc/omap/Makefile deleted file mode 100644 index d005338dd13c..000000000000 --- a/sound/soc/omap/Makefile +++ /dev/null @@ -1,30 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# OMAP Platform Support -snd-soc-sdma-objs := sdma-pcm.o -snd-soc-omap-dmic-objs := omap-dmic.o -snd-soc-omap-mcbsp-objs := omap-mcbsp.o omap-mcbsp-st.o -snd-soc-omap-mcpdm-objs := omap-mcpdm.o -snd-soc-omap-hdmi-audio-objs := omap-hdmi-audio.o - -obj-$(CONFIG_SND_SDMA_SOC) += snd-soc-sdma.o -obj-$(CONFIG_SND_OMAP_SOC_DMIC) += snd-soc-omap-dmic.o -obj-$(CONFIG_SND_OMAP_SOC_MCBSP) += snd-soc-omap-mcbsp.o -obj-$(CONFIG_SND_OMAP_SOC_MCPDM) += snd-soc-omap-mcpdm.o -obj-$(CONFIG_SND_OMAP_SOC_HDMI_AUDIO) += snd-soc-omap-hdmi-audio.o - -# OMAP Machine Support -snd-soc-n810-objs := n810.o -snd-soc-rx51-objs := rx51.o -snd-soc-ams-delta-objs := ams-delta.o -snd-soc-osk5912-objs := osk5912.o -snd-soc-omap-abe-twl6040-objs := omap-abe-twl6040.o -snd-soc-omap-twl4030-objs := omap-twl4030.o -snd-soc-omap3pandora-objs := omap3pandora.o - -obj-$(CONFIG_SND_OMAP_SOC_N810) += snd-soc-n810.o -obj-$(CONFIG_SND_OMAP_SOC_RX51) += snd-soc-rx51.o -obj-$(CONFIG_SND_OMAP_SOC_AMS_DELTA) += snd-soc-ams-delta.o -obj-$(CONFIG_SND_OMAP_SOC_OSK5912) += snd-soc-osk5912.o -obj-$(CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040) += snd-soc-omap-abe-twl6040.o -obj-$(CONFIG_SND_OMAP_SOC_OMAP_TWL4030) += snd-soc-omap-twl4030.o -obj-$(CONFIG_SND_OMAP_SOC_OMAP3_PANDORA) += snd-soc-omap3pandora.o diff --git a/sound/soc/ti/Kconfig b/sound/soc/ti/Kconfig new file mode 100644 index 000000000000..698810c770f0 --- /dev/null +++ b/sound/soc/ti/Kconfig @@ -0,0 +1,368 @@ +menu "Audio support for Texas Instruments SoCs" +depends on DMA_OMAP || TI_EDMA || COMPILE_TEST + +config SND_SOC_TI_EDMA_PCM + tristate + select SND_SOC_GENERIC_DMAENGINE_PCM + +config SND_SOC_TI_SDMA_PCM + tristate + select SND_SOC_GENERIC_DMAENGINE_PCM + +comment "Texas Instruments DAI support for:" +config SND_SOC_DAVINCI_ASP + tristate "daVinci Audio Serial Port (ASP) or McBSP suport" + depends on ARCH_DAVINCI || COMPILE_TEST + select SND_SOC_TI_EDMA_PCM + help + Say Y or M here if you want audio support via daVinci ASP or McBSP. + The driver only implements the ASP support which is a subset of + daVinci McBSP (w/o the multichannel support). + +config SND_SOC_DAVINCI_MCASP + tristate "Multichannel Audio Serial Port (McASP) support" + select SND_SOC_TI_EDMA_PCM if TI_EDMA + select SND_SOC_TI_SDMA_PCM if DMA_OMAP + help + Say Y or M here if you want to have support for McASP IP found in + various Texas Instruments SoCs like: + - daVinci devices + - Sitara line of SoCs (AM335x, AM438x, etc) + - DRA7x devices + - Keystone devices + +config SND_SOC_DAVINCI_VCIF + tristate "daVinci Voice Interface (VCIF) suport" + depends on ARCH_DAVINCI || COMPILE_TEST + select SND_SOC_TI_EDMA_PCM + help + Say Y or M here if you want audio support via daVinci VCIF. + +config SND_SOC_OMAP_DMIC + tristate "Digital Microphone Module (DMIC) support" + depends on ARCH_OMAP4 || SOC_OMAP5 || COMPILE_TEST + select SND_SOC_TI_SDMA_PCM + help + Say Y or M here if you want to have support for DMIC IP found in + OMAP4 and OMAP5. + +config SND_OMAP_SOC_MCBSP + tristate + +config SND_SOC_OMAP_MCBSP + tristate "Multichannel Buffered Serial Port (McBSP) support" + depends on ARCH_OMAP || ARCH_OMAP1 || COMPILE_TEST + select SND_SOC_TI_SDMA_PCM + select SND_OMAP_SOC_MCBSP + help + Say Y or M here if you want to have support for McBSP IP found in + Texas Instruments OMAP1/2/3/4/5 SoCs. + +config SND_SOC_OMAP_MCPDM + tristate "Multichannel PDM Controller (McPDM) support" + depends on ARCH_OMAP4 || SOC_OMAP5 || COMPILE_TEST + select SND_SOC_TI_SDMA_PCM + help + Say Y or M here if you want to have support for McPDM IP found in + OMAP4 and OMAP5. + +comment "Audio support for boards with Texas Instruments SoCs" +config SND_SOC_NOKIA_N810 + tristate "SoC Audio support for Nokia N810" + depends on MACH_NOKIA_N810 && I2C + select SND_SOC_OMAP_MCBSP + select SND_SOC_TLV320AIC3X + help + Say Y or M if you want to add support for SoC audio on Nokia N810. + +config SND_SOC_NOKIA_RX51 + tristate "SoC Audio support for Nokia RX-51" + depends on ARCH_OMAP3 && I2C && GPIOLIB + select SND_SOC_OMAP_MCBSP + select SND_SOC_TLV320AIC3X + select SND_SOC_TPA6130A2 + help + Say Y or M if you want to add support for SoC audio on Nokia RX-51 + hardware. This is also known as Nokia N900 product. + +config SND_SOC_OMAP3_PANDORA + tristate "SoC Audio support for OMAP3 Pandora" + depends on ARCH_OMAP3 + depends on TWL4030_CORE + select SND_SOC_OMAP_MCBSP + select SND_SOC_TWL4030 + help + Say Y or M if you want to add support for SoC audio on the OMAP3 Pandora. + +config SND_SOC_OMAP3_TWL4030 + tristate "SoC Audio support for OMAP3 based boards with twl4030 codec" + depends on ARCH_OMAP3 || COMPILE_TEST + depends on TWL4030_CORE + select SND_SOC_OMAP_MCBSP + select SND_SOC_TWL4030 + help + Say Y or M if you want to add support for SoC audio on OMAP3 based + boards using twl4030 as codec. This driver currently supports: + - Beagleboard or Devkit8000 + - Gumstix Overo or CompuLab CM-T35/CM-T3730 + - IGEP v2 + - OMAP3EVM + - SDP3430 + - Zoom2 + +config SND_SOC_OMAP_ABE_TWL6040 + tristate "SoC Audio support for OMAP boards using ABE and twl6040 codec" + depends on TWL6040_CORE && COMMON_CLK + depends on ARCH_OMAP4 || (SOC_OMAP5 && MFD_PALMAS) || COMPILE_TEST + select SND_SOC_OMAP_DMIC + select SND_SOC_OMAP_MCPDM + select SND_SOC_TWL6040 + help + Say Y or M if you want to add support for SoC audio on OMAP boards + using ABE and twl6040 codec. This driver currently supports: + - SDP4430/Blaze boards + - PandaBoard (4430) + - PandaBoardES (4460) + - OMAP5 uEVM + +config SND_SOC_OMAP_AMS_DELTA + tristate "SoC Audio support for Amstrad E3 (Delta) videophone" + depends on MACH_AMS_DELTA && TTY + select SND_SOC_OMAP_MCBSP + select SND_SOC_CX20442 + help + Say Y or M if you want to add support for SoC audio device + connected to a handset and a speakerphone found on Amstrad E3 (Delta) + videophone. + + Note that in order to get those devices fully supported, you have to + build the kernel with standard serial port driver included and + configured for at least 4 ports. Then, from userspace, you must load + a line discipline #19 on the modem (ttyS3) serial line. The simplest + way to achieve this is to install util-linux-ng and use the included + ldattach utility. This can be started automatically from udev, + a simple rule like this one should do the trick (it does for me): + ACTION=="add", KERNEL=="controlC0", \ + RUN+="/usr/sbin/ldattach 19 /dev/ttyS3" + +config SND_SOC_OMAP_HDMI + tristate "OMAP4/5 HDMI audio support" + depends on OMAP4_DSS_HDMI || OMAP5_DSS_HDMI || COMPILE_TEST + select SND_SOC_TI_SDMA_PCM + help + For HDMI audio to work OMAPDSS HDMI support should be + enabled. + The hdmi audio driver implements cpu-dai component using the + callbacks provided by OMAPDSS and registers the component + under DSS HDMI device. Omap-pcm is registered for platform + component also under DSS HDMI device. Dummy codec is used as + as codec component. The hdmi audio driver implements also + the card and registers it under its own platform device. + The device for the driver is registered by OMAPDSS hdmi + driver. + +config SND_SOC_OMAP_OSK5912 + tristate "SoC Audio support for omap osk5912" + depends on MACH_OMAP_OSK && I2C + select SND_SOC_OMAP_MCBSP + select SND_SOC_TLV320AIC23_I2C + help + Say Y or M if you want to add support for SoC audio on osk5912. + +config SND_SOC_DAVINCI_EVM + tristate "SoC Audio support for DaVinci EVMs" + depends on ARCH_DAVINCI && I2C + select SND_SOC_DAVINCI_ASP if MACH_DAVINCI_DM355_EVM + select SND_SOC_DAVINCI_ASP if SND_SOC_DM365_AIC3X_CODEC + select SND_SOC_DAVINCI_VCIF if SND_SOC_DM365_VOICE_CODEC + select SND_SOC_DAVINCI_ASP if MACH_DAVINCI_EVM # DM6446 + select SND_SOC_DAVINCI_MCASP if MACH_DAVINCI_DM6467_EVM + select SND_SOC_SPDIF if MACH_DAVINCI_DM6467_EVM + select SND_SOC_DAVINCI_MCASP if MACH_DAVINCI_DA830_EVM + select SND_SOC_DAVINCI_MCASP if MACH_DAVINCI_DA850_EVM + select SND_SOC_TLV320AIC3X + help + Say Y if you want to add support for SoC audio on the following TI + DaVinci EVM platforms: + - DM355 + - DM365 + - DM6446 + - DM6447 + - DM830 + - DM850 + +choice + prompt "DM365 codec select" + depends on SND_SOC_DAVINCI_EVM + depends on MACH_DAVINCI_DM365_EVM + +config SND_SOC_DM365_AIC3X_CODEC + bool "Audio Codec - AIC3101" + help + Say Y if you want to add support for AIC3101 audio codec + +config SND_SOC_DM365_VOICE_CODEC + bool "Voice Codec - CQ93VC" + select MFD_DAVINCI_VOICECODEC + select SND_SOC_CQ0093VC + help + Say Y if you want to add support for SoC On-chip voice codec +endchoice + +menu "Deprecated kconfig options:" + +config SND_AM33XX_SOC_EVM + tristate "SoC Audio for the AM33XX chip based boards" + depends on SOC_AM33XX && I2C + select SND_SOC_TLV320AIC3X + select SND_SOC_DAVINCI_MCASP + help + Say Y or M if you want to add support for SoC audio on AM33XX + boards using McASP and TLV320AIC3X codec. For example AM335X-EVM, + AM335X-EVMSK, and BeagelBone with AudioCape boards have this + setup. + +config SND_DAVINCI_SOC_EVM + tristate "SoC Audio support for DaVinci DM6446, DM355 or DM365 EVM" + depends on ARCH_DAVINCI && I2C + depends on MACH_DAVINCI_EVM || MACH_DAVINCI_DM355_EVM || MACH_DAVINCI_DM365_EVM + select SND_SOC_DAVINCI_EVM + help + Say Y if you want to add support for SoC audio on TI + DaVinci DM6446, DM355 or DM365 EVM platforms. + +choice + prompt "DM365 codec select" + depends on SND_DAVINCI_SOC_EVM + depends on MACH_DAVINCI_DM365_EVM + +config SND_DM365_AIC3X_CODEC + tristate "Audio Codec - AIC3101" + select SND_SOC_DM365_AIC3X_CODEC + help + Say Y if you want to add support for AIC3101 audio codec + +config SND_DM365_VOICE_CODEC + tristate "Voice Codec - CQ93VC" + select SND_SOC_DM365_VOICE_CODEC + help + Say Y if you want to add support for SoC On-chip voice codec +endchoice + +config SND_DM6467_SOC_EVM + tristate "SoC Audio support for DaVinci DM6467 EVM" + depends on MACH_DAVINCI_DM6467_EVM && I2C + select SND_SOC_DAVINCI_EVM + + help + Say Y if you want to add support for SoC audio on TI + +config SND_DA830_SOC_EVM + tristate "SoC Audio support for DA830/OMAP-L137 EVM" + depends on MACH_DAVINCI_DA830_EVM && I2C + select SND_SOC_DAVINCI_EVM + + help + Say Y if you want to add support for SoC audio on TI + DA830/OMAP-L137 EVM + +config SND_DA850_SOC_EVM + tristate "SoC Audio support for DA850/OMAP-L138 EVM" + depends on MACH_DAVINCI_DA850_EVM && I2C + select SND_SOC_DAVINCI_EVM + help + Say Y if you want to add support for SoC audio on TI + DA850/OMAP-L138 EVM + +config SND_OMAP_SOC_HDMI_AUDIO + tristate "HDMI audio support for OMAP4+ based SoCs" + select SND_SOC_OMAP_HDMI + help + For HDMI audio to work OMAPDSS HDMI support should be + enabled. + The hdmi audio driver implements cpu-dai component using the + callbacks provided by OMAPDSS and registers the component + under DSS HDMI device. Omap-pcm is registered for platform + component also under DSS HDMI device. Dummy codec is used as + as codec component. The hdmi audio driver implements also + the card and registers it under its own platform device. + The device for the driver is registered by OMAPDSS hdmi + driver. + +config SND_OMAP_SOC_N810 + tristate "SoC Audio support for Nokia N810" + depends on MACH_NOKIA_N810 && I2C + select SND_SOC_NOKIA_N810 + help + Say Y if you want to add support for SoC audio on Nokia N810. + +config SND_OMAP_SOC_RX51 + tristate "SoC Audio support for Nokia N900 (RX-51)" + depends on ARM && I2C && GPIOLIB && ARCH_OMAP3 + select SND_SOC_NOKIA_RX51 + help + Say Y if you want to add support for SoC audio on Nokia N900 + cellphone. + +config SND_OMAP_SOC_AMS_DELTA + tristate "SoC Audio support for Amstrad E3 (Delta) videophone" + depends on MACH_AMS_DELTA && TTY + select SND_SOC_OMAP_AMS_DELTA + help + Say Y if you want to add support for SoC audio device connected to + a handset and a speakerphone found on Amstrad E3 (Delta) videophone. + + Note that in order to get those devices fully supported, you have to + build the kernel with standard serial port driver included and + configured for at least 4 ports. Then, from userspace, you must load + a line discipline #19 on the modem (ttyS3) serial line. The simplest + way to achieve this is to install util-linux-ng and use the included + ldattach utility. This can be started automatically from udev, + a simple rule like this one should do the trick (it does for me): + ACTION=="add", KERNEL=="controlC0", \ + RUN+="/usr/sbin/ldattach 19 /dev/ttyS3" + +config SND_OMAP_SOC_OSK5912 + tristate "SoC Audio support for omap osk5912" + depends on MACH_OMAP_OSK && I2C + select SND_SOC_OMAP_OSK5912 + help + Say Y if you want to add support for SoC audio on osk5912. + +config SND_OMAP_SOC_OMAP_TWL4030 + tristate "SoC Audio support for TI SoC based boards with twl4030 codec" + depends on TWL4030_CORE + select SND_SOC_OMAP3_TWL4030 + help + Say Y if you want to add support for SoC audio on TI SoC based boards + using twl4030 as c codec. This driver currently supports: + - Beagleboard or Devkit8000 + - Gumstix Overo or CompuLab CM-T35/CM-T3730 + - IGEP v2 + - OMAP3EVM + - SDP3430 + - Zoom2 + +config SND_OMAP_SOC_OMAP_ABE_TWL6040 + tristate "SoC Audio support for OMAP boards using ABE and twl6040 codec" + depends on TWL6040_CORE && COMMON_CLK + depends on ARCH_OMAP4 || (SOC_OMAP5 && MFD_PALMAS) || COMPILE_TEST + select SND_SOC_OMAP_ABE_TWL6040 + help + Say Y if you want to add support for SoC audio on OMAP boards using + ABE and twl6040 codec. This driver currently supports: + - SDP4430/Blaze boards + - PandaBoard (4430) + - PandaBoardES (4460) + - omap5-uevm (5432) + +config SND_OMAP_SOC_OMAP3_PANDORA + tristate "SoC Audio support for OMAP3 Pandora" + depends on TWL4030_CORE + select SND_SOC_OMAP3_PANDORA + help + Say Y if you want to add support for SoC audio on the OMAP3 Pandora. +endmenu + +endmenu + diff --git a/sound/soc/ti/Makefile b/sound/soc/ti/Makefile new file mode 100644 index 000000000000..08c44d56ef3e --- /dev/null +++ b/sound/soc/ti/Makefile @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: GPL-2.0 + +# Platform drivers +snd-soc-ti-edma-objs := edma-pcm.o +snd-soc-ti-sdma-objs := sdma-pcm.o + +obj-$(CONFIG_SND_SOC_TI_EDMA_PCM) += snd-soc-ti-edma.o +obj-$(CONFIG_SND_SOC_TI_SDMA_PCM) += snd-soc-ti-sdma.o + +# CPU DAI drivers +snd-soc-davinci-asp-objs := davinci-i2s.o +snd-soc-davinci-mcasp-objs := davinci-mcasp.o +snd-soc-davinci-vcif-objs := davinci-vcif.o +snd-soc-omap-dmic-objs := omap-dmic.o +snd-soc-omap-mcbsp-objs := omap-mcbsp.o omap-mcbsp-st.o +snd-soc-omap-mcpdm-objs := omap-mcpdm.o + +obj-$(CONFIG_SND_SOC_DAVINCI_ASP) += snd-soc-davinci-asp.o +obj-$(CONFIG_SND_SOC_DAVINCI_MCASP) += snd-soc-davinci-mcasp.o +obj-$(CONFIG_SND_SOC_DAVINCI_VCIF) += snd-soc-davinci-vcif.o +obj-$(CONFIG_SND_SOC_OMAP_DMIC) += snd-soc-omap-dmic.o +obj-$(CONFIG_SND_SOC_OMAP_MCBSP) += snd-soc-omap-mcbsp.o +obj-$(CONFIG_SND_SOC_OMAP_MCPDM) += snd-soc-omap-mcpdm.o + +# Machine drivers +snd-soc-davinci-evm-objs := davinci-evm.o +snd-soc-n810-objs := n810.o +snd-soc-rx51-objs := rx51.o +snd-soc-omap3pandora-objs := omap3pandora.o +snd-soc-omap-twl4030-objs := omap-twl4030.o +snd-soc-omap-abe-twl6040-objs := omap-abe-twl6040.o +snd-soc-ams-delta-objs := ams-delta.o +snd-soc-omap-hdmi-objs := omap-hdmi.o +snd-soc-osk5912-objs := osk5912.o + +obj-$(CONFIG_SND_SOC_DAVINCI_EVM) += snd-soc-davinci-evm.o +obj-$(CONFIG_SND_SOC_NOKIA_N810) += snd-soc-n810.o +obj-$(CONFIG_SND_SOC_NOKIA_RX51) += snd-soc-rx51.o +obj-$(CONFIG_SND_SOC_OMAP3_PANDORA) += snd-soc-omap3pandora.o +obj-$(CONFIG_SND_SOC_OMAP3_TWL4030) += snd-soc-omap-twl4030.o +obj-$(CONFIG_SND_SOC_OMAP_ABE_TWL6040) += snd-soc-omap-abe-twl6040.o +obj-$(CONFIG_SND_SOC_OMAP_AMS_DELTA) += snd-soc-ams-delta.o +obj-$(CONFIG_SND_SOC_OMAP_HDMI) += snd-soc-omap-hdmi.o +obj-$(CONFIG_SND_SOC_OMAP_OSK5912) += snd-soc-osk5912.o diff --git a/sound/soc/omap/ams-delta.c b/sound/soc/ti/ams-delta.c similarity index 100% rename from sound/soc/omap/ams-delta.c rename to sound/soc/ti/ams-delta.c diff --git a/sound/soc/davinci/davinci-evm.c b/sound/soc/ti/davinci-evm.c similarity index 99% rename from sound/soc/davinci/davinci-evm.c rename to sound/soc/ti/davinci-evm.c index 7a369e0f2093..4869d6311510 100644 --- a/sound/soc/davinci/davinci-evm.c +++ b/sound/soc/ti/davinci-evm.c @@ -170,7 +170,7 @@ static struct snd_soc_dai_link dm355_evm_dai = { };
static struct snd_soc_dai_link dm365_evm_dai = { -#ifdef CONFIG_SND_DM365_AIC3X_CODEC +#ifdef CONFIG_SND_SOC_DM365_AIC3X_CODEC .name = "TLV320AIC3X", .stream_name = "AIC3X", .cpu_dai_name = "davinci-mcbsp", @@ -181,7 +181,7 @@ static struct snd_soc_dai_link dm365_evm_dai = { .ops = &evm_ops, .dai_fmt = SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_CBM_CFM | SND_SOC_DAIFMT_IB_NF, -#elif defined(CONFIG_SND_DM365_VOICE_CODEC) +#elif defined(CONFIG_SND_SOC_DM365_VOICE_CODEC) .name = "Voice Codec - CQ93VC", .stream_name = "CQ93", .cpu_dai_name = "davinci-vcif", diff --git a/sound/soc/davinci/davinci-i2s.c b/sound/soc/ti/davinci-i2s.c similarity index 100% rename from sound/soc/davinci/davinci-i2s.c rename to sound/soc/ti/davinci-i2s.c diff --git a/sound/soc/davinci/davinci-i2s.h b/sound/soc/ti/davinci-i2s.h similarity index 100% rename from sound/soc/davinci/davinci-i2s.h rename to sound/soc/ti/davinci-i2s.h diff --git a/sound/soc/davinci/davinci-mcasp.c b/sound/soc/ti/davinci-mcasp.c similarity index 99% rename from sound/soc/davinci/davinci-mcasp.c rename to sound/soc/ti/davinci-mcasp.c index 40d3a916fb74..eeda6d5565bc 100644 --- a/sound/soc/davinci/davinci-mcasp.c +++ b/sound/soc/ti/davinci-mcasp.c @@ -39,7 +39,7 @@ #include <sound/dmaengine_pcm.h>
#include "edma-pcm.h" -#include "../omap/sdma-pcm.h" +#include "sdma-pcm.h" #include "davinci-mcasp.h"
#define MCASP_MAX_AFIFO_DEPTH 64 @@ -2149,9 +2149,9 @@ static int davinci_mcasp_probe(struct platform_device *pdev) ret = davinci_mcasp_get_dma_type(mcasp); switch (ret) { case PCM_EDMA: -#if IS_BUILTIN(CONFIG_SND_EDMA_SOC) || \ - (IS_MODULE(CONFIG_SND_DAVINCI_SOC_MCASP) && \ - IS_MODULE(CONFIG_SND_EDMA_SOC)) +#if IS_BUILTIN(CONFIG_SND_SOC_TI_EDMA_PCM) || \ + (IS_MODULE(CONFIG_SND_SOC_DAVINCI_MCASP) && \ + IS_MODULE(CONFIG_SND_SOC_TI_EDMA_PCM)) ret = edma_pcm_platform_register(&pdev->dev); #else dev_err(&pdev->dev, "Missing SND_EDMA_SOC\n"); @@ -2160,9 +2160,9 @@ static int davinci_mcasp_probe(struct platform_device *pdev) #endif break; case PCM_SDMA: -#if IS_BUILTIN(CONFIG_SND_SDMA_SOC) || \ - (IS_MODULE(CONFIG_SND_DAVINCI_SOC_MCASP) && \ - IS_MODULE(CONFIG_SND_SDMA_SOC)) +#if IS_BUILTIN(CONFIG_SND_SOC_TI_SDMA_PCM) || \ + (IS_MODULE(CONFIG_SND_SOC_DAVINCI_MCASP) && \ + IS_MODULE(CONFIG_SND_SOC_TI_SDMA_PCM)) ret = sdma_pcm_platform_register(&pdev->dev, NULL, NULL); #else dev_err(&pdev->dev, "Missing SND_SDMA_SOC\n"); diff --git a/sound/soc/davinci/davinci-mcasp.h b/sound/soc/ti/davinci-mcasp.h similarity index 100% rename from sound/soc/davinci/davinci-mcasp.h rename to sound/soc/ti/davinci-mcasp.h diff --git a/sound/soc/davinci/davinci-vcif.c b/sound/soc/ti/davinci-vcif.c similarity index 100% rename from sound/soc/davinci/davinci-vcif.c rename to sound/soc/ti/davinci-vcif.c diff --git a/sound/soc/davinci/edma-pcm.c b/sound/soc/ti/edma-pcm.c similarity index 100% rename from sound/soc/davinci/edma-pcm.c rename to sound/soc/ti/edma-pcm.c diff --git a/sound/soc/davinci/edma-pcm.h b/sound/soc/ti/edma-pcm.h similarity index 91% rename from sound/soc/davinci/edma-pcm.h rename to sound/soc/ti/edma-pcm.h index b0957744851c..8058bdb0f032 100644 --- a/sound/soc/davinci/edma-pcm.h +++ b/sound/soc/ti/edma-pcm.h @@ -20,13 +20,13 @@ #ifndef __EDMA_PCM_H__ #define __EDMA_PCM_H__
-#if IS_ENABLED(CONFIG_SND_EDMA_SOC) +#if IS_ENABLED(CONFIG_SND_SOC_TI_EDMA_PCM) int edma_pcm_platform_register(struct device *dev); #else static inline int edma_pcm_platform_register(struct device *dev) { return 0; } -#endif /* CONFIG_SND_EDMA_SOC */ +#endif /* CONFIG_SND_SOC_TI_EDMA_PCM */
#endif /* __EDMA_PCM_H__ */ diff --git a/sound/soc/omap/n810.c b/sound/soc/ti/n810.c similarity index 100% rename from sound/soc/omap/n810.c rename to sound/soc/ti/n810.c diff --git a/sound/soc/omap/omap-abe-twl6040.c b/sound/soc/ti/omap-abe-twl6040.c similarity index 100% rename from sound/soc/omap/omap-abe-twl6040.c rename to sound/soc/ti/omap-abe-twl6040.c diff --git a/sound/soc/omap/omap-dmic.c b/sound/soc/ti/omap-dmic.c similarity index 100% rename from sound/soc/omap/omap-dmic.c rename to sound/soc/ti/omap-dmic.c diff --git a/sound/soc/omap/omap-dmic.h b/sound/soc/ti/omap-dmic.h similarity index 100% rename from sound/soc/omap/omap-dmic.h rename to sound/soc/ti/omap-dmic.h diff --git a/sound/soc/omap/omap-hdmi-audio.c b/sound/soc/ti/omap-hdmi.c similarity index 100% rename from sound/soc/omap/omap-hdmi-audio.c rename to sound/soc/ti/omap-hdmi.c diff --git a/sound/soc/omap/omap-mcbsp-priv.h b/sound/soc/ti/omap-mcbsp-priv.h similarity index 100% rename from sound/soc/omap/omap-mcbsp-priv.h rename to sound/soc/ti/omap-mcbsp-priv.h diff --git a/sound/soc/omap/omap-mcbsp-st.c b/sound/soc/ti/omap-mcbsp-st.c similarity index 100% rename from sound/soc/omap/omap-mcbsp-st.c rename to sound/soc/ti/omap-mcbsp-st.c diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/ti/omap-mcbsp.c similarity index 100% rename from sound/soc/omap/omap-mcbsp.c rename to sound/soc/ti/omap-mcbsp.c diff --git a/sound/soc/omap/omap-mcbsp.h b/sound/soc/ti/omap-mcbsp.h similarity index 100% rename from sound/soc/omap/omap-mcbsp.h rename to sound/soc/ti/omap-mcbsp.h diff --git a/sound/soc/omap/omap-mcpdm.c b/sound/soc/ti/omap-mcpdm.c similarity index 100% rename from sound/soc/omap/omap-mcpdm.c rename to sound/soc/ti/omap-mcpdm.c diff --git a/sound/soc/omap/omap-mcpdm.h b/sound/soc/ti/omap-mcpdm.h similarity index 100% rename from sound/soc/omap/omap-mcpdm.h rename to sound/soc/ti/omap-mcpdm.h diff --git a/sound/soc/omap/omap-twl4030.c b/sound/soc/ti/omap-twl4030.c similarity index 100% rename from sound/soc/omap/omap-twl4030.c rename to sound/soc/ti/omap-twl4030.c diff --git a/sound/soc/omap/omap3pandora.c b/sound/soc/ti/omap3pandora.c similarity index 100% rename from sound/soc/omap/omap3pandora.c rename to sound/soc/ti/omap3pandora.c diff --git a/sound/soc/omap/osk5912.c b/sound/soc/ti/osk5912.c similarity index 100% rename from sound/soc/omap/osk5912.c rename to sound/soc/ti/osk5912.c diff --git a/sound/soc/omap/rx51.c b/sound/soc/ti/rx51.c similarity index 100% rename from sound/soc/omap/rx51.c rename to sound/soc/ti/rx51.c diff --git a/sound/soc/omap/sdma-pcm.c b/sound/soc/ti/sdma-pcm.c similarity index 100% rename from sound/soc/omap/sdma-pcm.c rename to sound/soc/ti/sdma-pcm.c diff --git a/sound/soc/omap/sdma-pcm.h b/sound/soc/ti/sdma-pcm.h similarity index 85% rename from sound/soc/omap/sdma-pcm.h rename to sound/soc/ti/sdma-pcm.h index 34a7f90b2587..cb0627c8dd34 100644 --- a/sound/soc/omap/sdma-pcm.h +++ b/sound/soc/ti/sdma-pcm.h @@ -7,7 +7,7 @@ #ifndef __SDMA_PCM_H__ #define __SDMA_PCM_H__
-#if IS_ENABLED(CONFIG_SND_SDMA_SOC) +#if IS_ENABLED(CONFIG_SND_SOC_TI_SDMA_PCM) int sdma_pcm_platform_register(struct device *dev, char *txdmachan, char *rxdmachan); #else @@ -16,6 +16,6 @@ static inline int sdma_pcm_platform_register(struct device *dev, { return -ENODEV; } -#endif /* CONFIG_SND_SDMA_SOC */ +#endif /* CONFIG_SND_SOC_TI_SDMA_PCM */
#endif /* __SDMA_PCM_H__ */
The sound/soc/davinci and omap directories are merged under sound/soc/ti.
Add myself as maintainer and update the OMAP audio support section with the new path and file names.
Signed-off-by: Peter Ujfalusi peter.ujfalusi@ti.com --- MAINTAINERS | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/MAINTAINERS b/MAINTAINERS index 66183b24418d..d7c9530accce 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -10862,7 +10862,10 @@ M: Jarkko Nikula jarkko.nikula@bitmer.com L: alsa-devel@alsa-project.org (moderated for non-subscribers) L: linux-omap@vger.kernel.org S: Maintained -F: sound/soc/omap/ +F: sound/soc/ti/omap* +F: sound/soc/ti/rx51.c +F: sound/soc/ti/n810.c +F: sound/soc/ti/sdma-pcm.*
OMAP CLOCK FRAMEWORK SUPPORT M: Paul Walmsley paul@pwsan.com @@ -14958,6 +14961,12 @@ F: Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.txt F: drivers/irqchip/irq-ti-sci-intr.c F: drivers/irqchip/irq-ti-sci-inta.c
+Texas Instruments ASoC drivers +M: Peter Ujfalusi peter.ujfalusi@ti.com +L: alsa-devel@alsa-project.org (moderated for non-subscribers) +S: Maintained +F: sound/soc/ti/ + THANKO'S RAREMONO AM/FM/SW RADIO RECEIVER USB DRIVER M: Hans Verkuil hverkuil@xs4all.nl L: linux-media@vger.kernel.org
The MCBSP config option has been changed.
Signed-off-by: Peter Ujfalusi peter.ujfalusi@ti.com --- arch/arm/mach-omap1/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index e8ccf51c6f29..a7e9c6d19fb5 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -8,7 +8,7 @@ obj-y := io.o id.o sram-init.o sram.o time.o irq.o mux.o flash.o \ serial.o devices.o dma.o fb.o obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o timer.o
-ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),) +ifneq ($(CONFIG_SND_SOC_OMAP_MCBSP),) obj-y += mcbsp.o endif
The MCBSP config option has been changed.
Signed-off-by: Peter Ujfalusi peter.ujfalusi@ti.com --- arch/arm/mach-omap2/Makefile | 2 +- arch/arm/mach-omap2/pdata-quirks.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 01377c292db4..899c60fac159 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -24,7 +24,7 @@ obj-$(CONFIG_SOC_OMAP5) += $(hwmod-common) $(secure-common) obj-$(CONFIG_SOC_AM43XX) += $(hwmod-common) $(secure-common) obj-$(CONFIG_SOC_DRA7XX) += $(hwmod-common) $(secure-common)
-ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),) +ifneq ($(CONFIG_SND_SOC_OMAP_MCBSP),) obj-y += mcbsp.o endif
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index 9fec5f84bf77..8a5b6ed4ec36 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -524,7 +524,7 @@ void omap_auxdata_legacy_init(struct device *dev) dev->platform_data = &twl_gpio_auxdata; }
-#if IS_ENABLED(CONFIG_SND_OMAP_SOC_MCBSP) +#if IS_ENABLED(CONFIG_SND_SOC_OMAP_MCBSP) static struct omap_mcbsp_platform_data mcbsp_pdata; static void __init omap3_mcbsp_init(void) { @@ -572,7 +572,7 @@ static struct of_dev_auxdata omap_auxdata_lookup[] = { OF_DEV_AUXDATA("ti,am3517-emac", 0x5c000000, "davinci_emac.0", &am35xx_emac_pdata), /* McBSP modules with sidetone core */ -#if IS_ENABLED(CONFIG_SND_OMAP_SOC_MCBSP) +#if IS_ENABLED(CONFIG_SND_SOC_OMAP_MCBSP) OF_DEV_AUXDATA("ti,omap3-mcbsp", 0x49022000, "49022000.mcbsp", &mcbsp_pdata), OF_DEV_AUXDATA("ti,omap3-mcbsp", 0x49024000, "49024000.mcbsp", &mcbsp_pdata), #endif
The codec selection config options for DMA365 has been changed.
Signed-off-by: Peter Ujfalusi peter.ujfalusi@ti.com --- arch/arm/mach-davinci/board-dm365-evm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index 8143756ff38b..09e439d4abf5 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -794,9 +794,9 @@ static __init void dm365_evm_init(void) /* maybe setup mmc1/etc ... _after_ mmc0 */ evm_init_cpld();
-#ifdef CONFIG_SND_DM365_AIC3X_CODEC +#ifdef CONFIG_SND_SOC_DM365_AIC3X_CODEC dm365_init_asp(); -#elif defined(CONFIG_SND_DM365_VOICE_CODEC) +#elif defined(CONFIG_SND_SOC_DM365_VOICE_CODEC) dm365_init_vc(); #endif dm365_init_rtc();
Use the new options for default audio support and enable Nokia n900 audio as well.
Signed-off-by: Peter Ujfalusi peter.ujfalusi@ti.com --- arch/arm/configs/omap2plus_defconfig | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 21cabb7ad970..9c6f436d1b12 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -381,13 +381,13 @@ CONFIG_SND_VERBOSE_PRINTK=y CONFIG_SND_DEBUG=y CONFIG_SND_USB_AUDIO=m CONFIG_SND_SOC=m -CONFIG_SND_EDMA_SOC=m -CONFIG_SND_AM33XX_SOC_EVM=m -CONFIG_SND_OMAP_SOC=m -CONFIG_SND_OMAP_SOC_HDMI_AUDIO=m -CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m -CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=m -CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m +CONFIG_SND_SOC_TLV320AIC3X=m +CONFIG_SND_SOC_DAVINCI_MCASP=m +CONFIG_SND_SOC_NOKIA_RX51=m +CONFIG_SND_SOC_OMAP_HDMI=m +CONFIG_SND_SOC_OMAP_ABE_TWL6040=m +CONFIG_SND_SOC_OMAP3_PANDORA=m +CONFIG_SND_SOC_OMAP3_TWL4030=m CONFIG_SND_SOC_CPCAP=m CONFIG_SND_SOC_TLV320AIC23_I2C=m CONFIG_SND_SIMPLE_CARD=m
No audio support is enabled by default via ASoC, disable the code as well.
Signed-off-by: Peter Ujfalusi peter.ujfalusi@ti.com --- arch/arm/configs/omap1_defconfig | 2 -- 1 file changed, 2 deletions(-)
diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig index 72f4bc83f467..cfc00b0961ec 100644 --- a/arch/arm/configs/omap1_defconfig +++ b/arch/arm/configs/omap1_defconfig @@ -175,8 +175,6 @@ CONFIG_SND_PCM_OSS=y # CONFIG_SND_VERBOSE_PROCFS is not set CONFIG_SND_DUMMY=y CONFIG_SND_USB_AUDIO=y -CONFIG_SND_SOC=y -CONFIG_SND_OMAP_SOC=y # CONFIG_USB_HID is not set CONFIG_USB=y CONFIG_USB_PHY=y
Use the new options for default audio support.
Signed-off-by: Peter Ujfalusi peter.ujfalusi@ti.com --- arch/arm/configs/davinci_all_defconfig | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index 07b2eadac3dd..207962a656a2 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -167,8 +167,9 @@ CONFIG_SOUND=m CONFIG_SND=m CONFIG_SND_USB_AUDIO=m CONFIG_SND_SOC=m -CONFIG_SND_EDMA_SOC=m -CONFIG_SND_DA850_SOC_EVM=m +CONFIG_SND_SOC_TLV320AIC3X=m +CONFIG_SND_SOC_DAVINCI_MCASP=m +CONFIG_SND_SOC_DAVINCI_EVM=m CONFIG_SND_SIMPLE_CARD=m CONFIG_HID=m CONFIG_HID_A4TECH=m
We no longer have these options used anywhere.
Signed-off-by: Peter Ujfalusi peter.ujfalusi@ti.com --- sound/soc/ti/Kconfig | 159 ------------------------------------------- 1 file changed, 159 deletions(-)
diff --git a/sound/soc/ti/Kconfig b/sound/soc/ti/Kconfig index 698810c770f0..4bf3c15d4e51 100644 --- a/sound/soc/ti/Kconfig +++ b/sound/soc/ti/Kconfig @@ -46,14 +46,10 @@ config SND_SOC_OMAP_DMIC Say Y or M here if you want to have support for DMIC IP found in OMAP4 and OMAP5.
-config SND_OMAP_SOC_MCBSP - tristate - config SND_SOC_OMAP_MCBSP tristate "Multichannel Buffered Serial Port (McBSP) support" depends on ARCH_OMAP || ARCH_OMAP1 || COMPILE_TEST select SND_SOC_TI_SDMA_PCM - select SND_OMAP_SOC_MCBSP help Say Y or M here if you want to have support for McBSP IP found in Texas Instruments OMAP1/2/3/4/5 SoCs. @@ -209,160 +205,5 @@ config SND_SOC_DM365_VOICE_CODEC Say Y if you want to add support for SoC On-chip voice codec endchoice
-menu "Deprecated kconfig options:" - -config SND_AM33XX_SOC_EVM - tristate "SoC Audio for the AM33XX chip based boards" - depends on SOC_AM33XX && I2C - select SND_SOC_TLV320AIC3X - select SND_SOC_DAVINCI_MCASP - help - Say Y or M if you want to add support for SoC audio on AM33XX - boards using McASP and TLV320AIC3X codec. For example AM335X-EVM, - AM335X-EVMSK, and BeagelBone with AudioCape boards have this - setup. - -config SND_DAVINCI_SOC_EVM - tristate "SoC Audio support for DaVinci DM6446, DM355 or DM365 EVM" - depends on ARCH_DAVINCI && I2C - depends on MACH_DAVINCI_EVM || MACH_DAVINCI_DM355_EVM || MACH_DAVINCI_DM365_EVM - select SND_SOC_DAVINCI_EVM - help - Say Y if you want to add support for SoC audio on TI - DaVinci DM6446, DM355 or DM365 EVM platforms. - -choice - prompt "DM365 codec select" - depends on SND_DAVINCI_SOC_EVM - depends on MACH_DAVINCI_DM365_EVM - -config SND_DM365_AIC3X_CODEC - tristate "Audio Codec - AIC3101" - select SND_SOC_DM365_AIC3X_CODEC - help - Say Y if you want to add support for AIC3101 audio codec - -config SND_DM365_VOICE_CODEC - tristate "Voice Codec - CQ93VC" - select SND_SOC_DM365_VOICE_CODEC - help - Say Y if you want to add support for SoC On-chip voice codec -endchoice - -config SND_DM6467_SOC_EVM - tristate "SoC Audio support for DaVinci DM6467 EVM" - depends on MACH_DAVINCI_DM6467_EVM && I2C - select SND_SOC_DAVINCI_EVM - - help - Say Y if you want to add support for SoC audio on TI - -config SND_DA830_SOC_EVM - tristate "SoC Audio support for DA830/OMAP-L137 EVM" - depends on MACH_DAVINCI_DA830_EVM && I2C - select SND_SOC_DAVINCI_EVM - - help - Say Y if you want to add support for SoC audio on TI - DA830/OMAP-L137 EVM - -config SND_DA850_SOC_EVM - tristate "SoC Audio support for DA850/OMAP-L138 EVM" - depends on MACH_DAVINCI_DA850_EVM && I2C - select SND_SOC_DAVINCI_EVM - help - Say Y if you want to add support for SoC audio on TI - DA850/OMAP-L138 EVM - -config SND_OMAP_SOC_HDMI_AUDIO - tristate "HDMI audio support for OMAP4+ based SoCs" - select SND_SOC_OMAP_HDMI - help - For HDMI audio to work OMAPDSS HDMI support should be - enabled. - The hdmi audio driver implements cpu-dai component using the - callbacks provided by OMAPDSS and registers the component - under DSS HDMI device. Omap-pcm is registered for platform - component also under DSS HDMI device. Dummy codec is used as - as codec component. The hdmi audio driver implements also - the card and registers it under its own platform device. - The device for the driver is registered by OMAPDSS hdmi - driver. - -config SND_OMAP_SOC_N810 - tristate "SoC Audio support for Nokia N810" - depends on MACH_NOKIA_N810 && I2C - select SND_SOC_NOKIA_N810 - help - Say Y if you want to add support for SoC audio on Nokia N810. - -config SND_OMAP_SOC_RX51 - tristate "SoC Audio support for Nokia N900 (RX-51)" - depends on ARM && I2C && GPIOLIB && ARCH_OMAP3 - select SND_SOC_NOKIA_RX51 - help - Say Y if you want to add support for SoC audio on Nokia N900 - cellphone. - -config SND_OMAP_SOC_AMS_DELTA - tristate "SoC Audio support for Amstrad E3 (Delta) videophone" - depends on MACH_AMS_DELTA && TTY - select SND_SOC_OMAP_AMS_DELTA - help - Say Y if you want to add support for SoC audio device connected to - a handset and a speakerphone found on Amstrad E3 (Delta) videophone. - - Note that in order to get those devices fully supported, you have to - build the kernel with standard serial port driver included and - configured for at least 4 ports. Then, from userspace, you must load - a line discipline #19 on the modem (ttyS3) serial line. The simplest - way to achieve this is to install util-linux-ng and use the included - ldattach utility. This can be started automatically from udev, - a simple rule like this one should do the trick (it does for me): - ACTION=="add", KERNEL=="controlC0", \ - RUN+="/usr/sbin/ldattach 19 /dev/ttyS3" - -config SND_OMAP_SOC_OSK5912 - tristate "SoC Audio support for omap osk5912" - depends on MACH_OMAP_OSK && I2C - select SND_SOC_OMAP_OSK5912 - help - Say Y if you want to add support for SoC audio on osk5912. - -config SND_OMAP_SOC_OMAP_TWL4030 - tristate "SoC Audio support for TI SoC based boards with twl4030 codec" - depends on TWL4030_CORE - select SND_SOC_OMAP3_TWL4030 - help - Say Y if you want to add support for SoC audio on TI SoC based boards - using twl4030 as c codec. This driver currently supports: - - Beagleboard or Devkit8000 - - Gumstix Overo or CompuLab CM-T35/CM-T3730 - - IGEP v2 - - OMAP3EVM - - SDP3430 - - Zoom2 - -config SND_OMAP_SOC_OMAP_ABE_TWL6040 - tristate "SoC Audio support for OMAP boards using ABE and twl6040 codec" - depends on TWL6040_CORE && COMMON_CLK - depends on ARCH_OMAP4 || (SOC_OMAP5 && MFD_PALMAS) || COMPILE_TEST - select SND_SOC_OMAP_ABE_TWL6040 - help - Say Y if you want to add support for SoC audio on OMAP boards using - ABE and twl6040 codec. This driver currently supports: - - SDP4430/Blaze boards - - PandaBoard (4430) - - PandaBoardES (4460) - - omap5-uevm (5432) - -config SND_OMAP_SOC_OMAP3_PANDORA - tristate "SoC Audio support for OMAP3 Pandora" - depends on TWL4030_CORE - select SND_SOC_OMAP3_PANDORA - help - Say Y if you want to add support for SoC audio on the OMAP3 Pandora. -endmenu - endmenu
* Peter Ujfalusi peter.ujfalusi@ti.com [181217 12:20]:
Mark, Tony, Sekhar: This series - as I mentioned - is based on next-20181210. Not sure what tag, branch, commit I should base this, but I can resend v2 if needed.
Good to see this clean-up happen :) Best to merge this all via the Alsa ASoC tree, it should not conflict with anything if it already applies against next:
Acked-by: Tony Lindgren tony@atomide.com
On 17/12/18 5:51 PM, Peter Ujfalusi wrote:
Mark, Tony, Sekhar: This series - as I mentioned - is based on next-20181210. Not sure what tag, branch, commit I should base this, but I can resend v2 if needed.
For the series:
Acked-by: Sekhar Nori nsekhar@ti.com
Looks like Mark has already applied it, but just for the record.
Thanks, Sekhar
participants (3)
-
Peter Ujfalusi -
Sekhar Nori -
Tony Lindgren