Re: [PATCH 1/2] dt-bindings: mediatek: mt6359: add ASoC mt6359 accdet document
Dear maintainers: Can you reply to me if any opinion? thanks
B.R. Argus
On Wed, 2021-01-06 at 20:19 +0800, Argus Lin wrote:
This patch adds MediaTek MT6359 accdet document.
Signed-off-by: Argus Lin argus.lin@mediatek.com
.../devicetree/bindings/sound/mt6359-accdet.yaml | 142 +++++++++++++++++++++ 1 file changed, 142 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/mt6359-accdet.yaml
diff --git a/Documentation/devicetree/bindings/sound/mt6359-accdet.yaml b/Documentation/devicetree/bindings/sound/mt6359-accdet.yaml new file mode 100644 index 0000000..fde0d29 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/mt6359-accdet.yaml @@ -0,0 +1,142 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/mt6359-accdet.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml#
+title: Mediatek Technologies Inc. MT6359 ASoC accdet driver bindings
+maintainers:
- Chipeng Chang chipeng.chang@mediatek.com
+description: |
- This binding describes the Mediatek Technologies MT6359 ASoC
- accdet driver.
+properties:
- compatible:
- enum:
- mediatek,mt6359-accdet
- mediatek,pmic-accdet
- accdet-name:
- maxItems: 1
- description: named as "mt6359-accdet" for snd_soc_card_jack.
- accdet-mic-vol:
- maxItems: 1
- description: |
accdet micbias1 voltage.
enum:
- 0x00 # 1.7v - micbias1 volage is 1.7v.
- 0x01 # 1.8v - micbias1 volage is 1.8v.
- 0x02 # 1.9v - micbias1 volage is 1.9v.
- 0x03 # 2.0v - micbias1 volage is 2.0v.
- 0x04 # 2.1v - micbias1 volage is 2.1v.
- 0x05 # 2.5v - micbias1 volage is 2.5v.
- 0x06 # 2.6v - micbias1 volage is 2.6v.
- 0x07 # 2.7v - micbias1 volage is 2.7v.
- 0x08 # 2.8v - micbias1 volage is 2.8v.
- 0x09 # 2.85v - micbias1 volage is 2.85v.
- accdet-plugout-debounce:
- maxItems: 1
- description: For using ap gpio eint only, it is sw debounce time.
- accdet-mic-mode:
- maxItems: 1
- description: |
value as 1, 2, 6 to indicate ACC/DCC mode. default is DCC mode 2.
enum:
- 0x01 # ACC - ACC mode.
- 0x02 # DCC - low cost without in bias.
- 0x06 # DCC - low cost with in bias.
- eint_use_ext_res:
- maxItems: 1
- description: select HP_EINT pull up resistance, default 0 use internal resistance.
- headset-mode-setting:
- maxItems: 15
- description: |
headset-mode-setting : Indicates customized pwm, debounce setting
accdet pwm_width, pwm_thresh, fall_delay, rise_delay
debounce0, debounce1, debounce3, debounce4
eint pwm_width, eint pwm_thresh
eint deb(debounce0, debounce1, debounce2, debounce3), inv_debounce.
- headset-use-ap-eint:
- maxItems: 1
- description: indicates to use ap gpio.
- headset-eint-num:
- maxItems: 1
- description: |
incicates pmic eint usage.
enum:
- 0x0 # PMIC_EINT0 - use pmic eint0 to trigger plug interrupt.
- 0x1 # PMIC_EINT1 - use pmic eint1 to trigger plug interrupt.
- 0x2 # PMIC_BI_EINT - use pmic eint0/1 to trigger plug interrupt.
- headset-eint-trig-mode:
- maxItems: 1
- description: |
incicates pmic eint trigger mode.
enum:
- 0x0 # PMIC_GPIO - use pmic gpio to detect plug status by setting polarity to high or low.
- 0x1 # PMIC_INVERTER - use pmic inverter to detect plug status.
- headset-key-mode:
- maxItems: 1
- description: |
incicates key mode type.
enum:
- 0x0 # THREE_KEY - support 3-key key mode.
- 0x1 # FOUR_KEY - support 4-key key mode.
- 0x1 # TRI_KEY_CDD - support 3-key google CDD key mode.
- headset-three-key-threshold:
- maxItems: 4
- description: |
3 key device detection threshold: 0--MD_MAX--UP_MAX--DW_MAX.
- headset-three-key-threshold-CDD:
- maxItems: 4
- description: |
3 key CDD device detection threshold: 0--MD_MAX--UP_MAX--DW_MAX.
- headset-four-key-threshold:
- maxItems: 4
- description: |
4 key device detection threshold: 0--MD_MAX--VOICE_MAX--UP_MAX--DW_MAX.
+additionalProperties: false
+examples:
- |
- accdet: accdet {
compatible = "mediatek,mt6359-accdet";
accdet-name = "mt6359-accdet";
accdet-mic-vol = <8>;
accdet-plugout-debounce = <1>;
accdet-mic-mode = <2>;
eint_use_ext_res = <0>;
headset-mode-setting = <0x500 0x500 1 0x1f0
0x800 0x800 0x20 0x44
0x4 0x1
0x5 0x3 0x3 0x5 0xe>;
headset-use-ap-eint = <0>;
headset-eint-num = <0>;
headset-eint-trig-mode = <1>;
headset-key-mode = <0>;
headset-three-key-threshold = <0 80 220 400>;
headset-three-key-threshold-CDD = <0 121 192 600>;
headset-four-key-threshold = <0 58 121 192 400>;
status = "okay";
- };
+...
1.8.1.1.dirty
participants (1)
-
Argus Lin