From: Shuming Fan shumingf@realtek.com

This is the initial amplifier driver for rt1308-sdw.

Signed-off-by: Shuming Fan shumingf@realtek.com --- sound/soc/codecs/Kconfig | 6 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/rt1308-sdw.c | 736 ++++++++++++++++++++++++++++++++++ sound/soc/codecs/rt1308-sdw.h | 169 ++++++++ 4 files changed, 913 insertions(+) create mode 100644 sound/soc/codecs/rt1308-sdw.c create mode 100644 sound/soc/codecs/rt1308-sdw.h

diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 7761aeec4d07..1de31f88a324 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -167,6 +167,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_RT5682 if I2C select SND_SOC_RT700_SDW if SOUNDWIRE select SND_SOC_RT711_SDW if SOUNDWIRE + select SND_SOC_RT1308_SDW if SOUNDWIRE select SND_SOC_SGTL5000 if I2C select SND_SOC_SI476X if MFD_SI476X_CORE select SND_SOC_SIMPLE_AMPLIFIER @@ -1004,6 +1005,11 @@ config SND_SOC_RT1305 config SND_SOC_RT1308 tristate

+config SND_SOC_RT1308_SDW + tristate "Realtek RT1308 Codec - SDW" + depends on SOUNDWIRE + select REGMAP_SOUNDWIRE + config SND_SOC_RT5514 tristate

diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 288b7af354a0..d49138640e0e 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -154,6 +154,7 @@ snd-soc-rl6347a-objs := rl6347a.o snd-soc-rt1011-objs := rt1011.o snd-soc-rt1305-objs := rt1305.o snd-soc-rt1308-objs := rt1308.o +snd-soc-rt1308-sdw-objs := rt1308-sdw.o snd-soc-rt274-objs := rt274.o snd-soc-rt286-objs := rt286.o snd-soc-rt298-objs := rt298.o @@ -447,6 +448,7 @@ obj-$(CONFIG_SND_SOC_RL6347A) += snd-soc-rl6347a.o obj-$(CONFIG_SND_SOC_RT1011) += snd-soc-rt1011.o obj-$(CONFIG_SND_SOC_RT1305) += snd-soc-rt1305.o obj-$(CONFIG_SND_SOC_RT1308) += snd-soc-rt1308.o +obj-$(CONFIG_SND_SOC_RT1308_SDW) += snd-soc-rt1308-sdw.o obj-$(CONFIG_SND_SOC_RT274) += snd-soc-rt274.o obj-$(CONFIG_SND_SOC_RT286) += snd-soc-rt286.o obj-$(CONFIG_SND_SOC_RT298) += snd-soc-rt298.o diff --git a/sound/soc/codecs/rt1308-sdw.c b/sound/soc/codecs/rt1308-sdw.c new file mode 100644 index 000000000000..8a03dbfe7906 --- /dev/null +++ b/sound/soc/codecs/rt1308-sdw.c @@ -0,0 +1,736 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// rt1308-sdw.c -- rt1308 ALSA SoC audio driver +// +// Copyright(c) 2019 Realtek Semiconductor Corp. +// +// +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/pm_runtime.h> +#include <linux/mod_devicetable.h> +#include <linux/soundwire/sdw.h> +#include <linux/soundwire/sdw_type.h> +#include <linux/soundwire/sdw_registers.h> +#include <linux/module.h> +#include <linux/regmap.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/initval.h> + +#include "rt1308.h" +#include "rt1308-sdw.h" + +static bool rt1308_readable_register(struct device *dev, unsigned int reg) +{ + switch (reg) { + case 0x00e0: + case 0x00f0: + case 0x2f01 ... 0x2f07: + case 0x3000 ... 0x3001: + case 0x3004 ... 0x3005: + case 0x3008: + case 0x300a: + case 0xc000 ... 0xcff3: + return true; + default: + return false; + } +} + +static bool rt1308_volatile_register(struct device *dev, unsigned int reg) +{ + switch (reg) { + case 0x2f01 ... 0x2f07: + case 0x3000 ... 0x3001: + case 0x3004 ... 0x3005: + case 0x3008: + case 0x300a: + case 0xc000: + return true; + default: + return false; + } +} + +static const struct regmap_config rt1308_sdw_regmap = { + .reg_bits = 32, + .val_bits = 8, + .readable_reg = rt1308_readable_register, + .volatile_reg = rt1308_volatile_register, + .max_register = 0xcfff, + .reg_defaults = rt1308_reg_defaults, + .num_reg_defaults = ARRAY_SIZE(rt1308_reg_defaults), + .cache_type = REGCACHE_RBTREE, + .use_single_read = true, + .use_single_write = true, +}; + +/* Bus clock frequency */ +#define RT1308_CLK_FREQ_9600000HZ 9600000 +#define RT1308_CLK_FREQ_12000000HZ 12000000 +#define RT1308_CLK_FREQ_6000000HZ 6000000 +#define RT1308_CLK_FREQ_4800000HZ 4800000 +#define RT1308_CLK_FREQ_2400000HZ 2400000 +#define RT1308_CLK_FREQ_12288000HZ 12288000 + +static int rt1308_clock_config(struct device *dev) +{ + struct rt1308_sdw_priv *rt1308 = dev_get_drvdata(dev); + unsigned int clk_freq, value; + + clk_freq = (rt1308->params.curr_dr_freq >> 1); + + switch (clk_freq) { + case RT1308_CLK_FREQ_12000000HZ: + value = 0x0; + break; + case RT1308_CLK_FREQ_6000000HZ: + value = 0x1; + break; + case RT1308_CLK_FREQ_9600000HZ: + value = 0x2; + break; + case RT1308_CLK_FREQ_4800000HZ: + value = 0x3; + break; + case RT1308_CLK_FREQ_2400000HZ: + value = 0x4; + break; + case RT1308_CLK_FREQ_12288000HZ: + value = 0x5; + break; + default: + return -EINVAL; + } + + regmap_write(rt1308->regmap, 0xe0, value); + regmap_write(rt1308->regmap, 0xf0, value); + + dev_dbg(dev, "%s complete, clk_freq=%d\n", __func__, clk_freq); + + return 0; +} + +static int rt1308_read_prop(struct sdw_slave *slave) +{ + struct sdw_slave_prop *prop = &slave->prop; + int nval, i, num_of_ports = 1; + u32 bit; + unsigned long addr; + struct sdw_dpn_prop *dpn; + + prop->paging_support = true; + + /* first we need to allocate memory for set bits in port lists */ + prop->source_ports = 0x00; /* BITMAP: 00010100 (not enable yet) */ + prop->sink_ports = 0x2; /* BITMAP: 00000010 */ + + /* for sink */ + nval = hweight32(prop->sink_ports); + num_of_ports += nval; + prop->sink_dpn_prop = devm_kcalloc(&slave->dev, nval, + sizeof(*prop->sink_dpn_prop), + GFP_KERNEL); + if (!prop->sink_dpn_prop) + return -ENOMEM; + + i = 0; + dpn = prop->sink_dpn_prop; + addr = prop->sink_ports; + for_each_set_bit(bit, &addr, 32) { + dpn[i].num = bit; + dpn[i].type = SDW_DPN_FULL; + dpn[i].simple_ch_prep_sm = true; + dpn[i].ch_prep_timeout = 10; + i++; + } + + /* Allocate port_ready based on num_of_ports */ + slave->port_ready = devm_kcalloc(&slave->dev, num_of_ports, + sizeof(*slave->port_ready), + GFP_KERNEL); + if (!slave->port_ready) + return -ENOMEM; + + /* Initialize completion */ + for (i = 0; i < num_of_ports; i++) + init_completion(&slave->port_ready[i]); + + /* set the timeout values */ + prop->clk_stop_timeout = 20; + + dev_dbg(&slave->dev, "%s\n", __func__); + + return 0; +} + +static int rt1308_io_init(struct device *dev, struct sdw_slave *slave) +{ + struct rt1308_sdw_priv *rt1308 = dev_get_drvdata(dev); + int ret = 0; + unsigned int efuse_m_btl_l, efuse_m_btl_r, tmp; + unsigned int efuse_c_btl_l, efuse_c_btl_r; + + if (rt1308->hw_init) + return 0; + + ret = rt1308_read_prop(slave); + if (ret < 0) + goto _io_init_err_; + + if (rt1308->first_hw_init) { + regcache_cache_only(rt1308->regmap, false); + regcache_cache_bypass(rt1308->regmap, true); + } + + /* + * PM runtime is only enabled when a Slave reports as Attached + */ + if (!rt1308->first_hw_init) { + /* set autosuspend parameters */ + pm_runtime_set_autosuspend_delay(&slave->dev, 3000); + pm_runtime_use_autosuspend(&slave->dev); + + /* update count of parent 'active' children */ + pm_runtime_set_active(&slave->dev); + + /* make sure the device does not suspend immediately */ + pm_runtime_mark_last_busy(&slave->dev); + + pm_runtime_enable(&slave->dev); + } + + pm_runtime_get_noresume(&slave->dev); + + /* sw reset */ + regmap_write(rt1308->regmap, RT1308_SDW_RESET, 0); + + /* read efuse */ + regmap_write(rt1308->regmap, 0xc360, 0x01); + regmap_write(rt1308->regmap, 0xc361, 0x80); + regmap_write(rt1308->regmap, 0xc7f0, 0x04); + regmap_write(rt1308->regmap, 0xc7f1, 0xfe); + msleep(100); + regmap_write(rt1308->regmap, 0xc7f0, 0x44); + msleep(20); + regmap_write(rt1308->regmap, 0xc240, 0x10); + + regmap_read(rt1308->regmap, 0xc861, &tmp); + efuse_m_btl_l = tmp; + regmap_read(rt1308->regmap, 0xc860, &tmp); + efuse_m_btl_l = efuse_m_btl_l | (tmp << 8); + regmap_read(rt1308->regmap, 0xc863, &tmp); + efuse_c_btl_l = tmp; + regmap_read(rt1308->regmap, 0xc862, &tmp); + efuse_c_btl_l = efuse_c_btl_l | (tmp << 8); + regmap_read(rt1308->regmap, 0xc871, &tmp); + efuse_m_btl_r = tmp; + regmap_read(rt1308->regmap, 0xc870, &tmp); + efuse_m_btl_r = efuse_m_btl_r | (tmp << 8); + regmap_read(rt1308->regmap, 0xc873, &tmp); + efuse_c_btl_r = tmp; + regmap_read(rt1308->regmap, 0xc872, &tmp); + efuse_c_btl_r = efuse_c_btl_r | (tmp << 8); + dev_info(&slave->dev, "%s m_btl_l=0x%x, m_btl_r=0x%x\n", __func__, + efuse_m_btl_l, efuse_m_btl_r); + dev_info(&slave->dev, "%s c_btl_l=0x%x, c_btl_r=0x%x\n", __func__, + efuse_c_btl_l, efuse_c_btl_r); + + /* initial settings */ + regmap_write(rt1308->regmap, 0xc103, 0xc0); + regmap_write(rt1308->regmap, 0xc030, 0x17); + regmap_write(rt1308->regmap, 0xc031, 0x81); + regmap_write(rt1308->regmap, 0xc032, 0x26); + regmap_write(rt1308->regmap, 0xc040, 0x80); + regmap_write(rt1308->regmap, 0xc041, 0x80); + regmap_write(rt1308->regmap, 0xc042, 0x06); + regmap_write(rt1308->regmap, 0xc052, 0x0a); + regmap_write(rt1308->regmap, 0xc080, 0x0a); + regmap_write(rt1308->regmap, 0xc060, 0x02); + regmap_write(rt1308->regmap, 0xc061, 0x75); + regmap_write(rt1308->regmap, 0xc062, 0x05); + regmap_write(rt1308->regmap, 0xc171, 0x07); + regmap_write(rt1308->regmap, 0xc173, 0x0d); + regmap_write(rt1308->regmap, 0xc311, 0x7f); + regmap_write(rt1308->regmap, 0xc900, 0x90); + regmap_write(rt1308->regmap, 0xc1a0, 0x84); + regmap_write(rt1308->regmap, 0xc1a1, 0x01); + regmap_write(rt1308->regmap, 0xc360, 0x78); + regmap_write(rt1308->regmap, 0xc361, 0x87); + regmap_write(rt1308->regmap, 0xc0a1, 0x71); + regmap_write(rt1308->regmap, 0xc210, 0x00); + regmap_write(rt1308->regmap, 0xc070, 0x00); + regmap_write(rt1308->regmap, 0xc100, 0xd7); + regmap_write(rt1308->regmap, 0xc101, 0xd7); + regmap_write(rt1308->regmap, 0xc300, 0x09); + + if (rt1308->first_hw_init) { + regcache_cache_bypass(rt1308->regmap, false); + regcache_mark_dirty(rt1308->regmap); + } else + rt1308->first_hw_init = true; + + /* Mark Slave initialization complete */ + rt1308->hw_init = true; + + pm_runtime_mark_last_busy(&slave->dev); + pm_runtime_put_autosuspend(&slave->dev); + + dev_dbg(&slave->dev, "%s hw_init complete\n", __func__); + +_io_init_err_: + return ret; +} + +static int rt1308_update_status(struct sdw_slave *slave, + enum sdw_slave_status status) +{ + struct rt1308_sdw_priv *rt1308 = dev_get_drvdata(&slave->dev); + + /* Update the status */ + rt1308->status = status; + + if (status == SDW_SLAVE_UNATTACHED) + rt1308->hw_init = false; + + /* + * Perform initialization only if slave status is present and + * hw_init flag is false + */ + if (rt1308->hw_init || rt1308->status != SDW_SLAVE_ATTACHED) + return 0; + + /* perform I/O transfers required for Slave initialization */ + return rt1308_io_init(&slave->dev, slave); +} + +static int rt1308_bus_config(struct sdw_slave *slave, + struct sdw_bus_params *params) +{ + struct rt1308_sdw_priv *rt1308 = dev_get_drvdata(&slave->dev); + int ret; + + memcpy(&rt1308->params, params, sizeof(*params)); + + ret = rt1308_clock_config(&slave->dev); + if (ret < 0) + dev_err(&slave->dev, "Invalid clk config"); + + return ret; +} + +static int rt1308_interrupt_callback(struct sdw_slave *slave, + struct sdw_slave_intr_status *status) +{ + dev_dbg(&slave->dev, + "%s control_port_stat=%x", __func__, status->control_port); + + return 0; +} + +static int rt1308_classd_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = + snd_soc_dapm_to_component(w->dapm); + + switch (event) { + case SND_SOC_DAPM_POST_PMU: + msleep(30); + snd_soc_component_update_bits(component, + RT1308_SDW_OFFSET | (RT1308_POWER_STATUS << 4), + 0x3, 0x3); + msleep(40); + break; + case SND_SOC_DAPM_PRE_PMD: + snd_soc_component_update_bits(component, + RT1308_SDW_OFFSET | (RT1308_POWER_STATUS << 4), + 0x3, 0); + usleep_range(150000, 200000); + break; + + default: + break; + } + + return 0; +} + +static const char * const rt1308_rx_data_ch_select[] = { + "LR", + "LL", + "RL", + "RR", +}; + +static SOC_ENUM_SINGLE_DECL(rt1308_rx_data_ch_enum, + RT1308_SDW_OFFSET | (RT1308_DATA_PATH << 4), 0, + rt1308_rx_data_ch_select); + +static const struct snd_kcontrol_new rt1308_snd_controls[] = { + + /* I2S Data Channel Selection */ + SOC_ENUM("RX Channel Select", rt1308_rx_data_ch_enum), +}; + +static const struct snd_kcontrol_new rt1308_sto_dac_l = + SOC_DAPM_SINGLE_AUTODISABLE("Switch", + RT1308_SDW_OFFSET_BYTE3 | (RT1308_DAC_SET << 4), + RT1308_DVOL_MUTE_L_EN_SFT, 1, 1); + +static const struct snd_kcontrol_new rt1308_sto_dac_r = + SOC_DAPM_SINGLE_AUTODISABLE("Switch", + RT1308_SDW_OFFSET_BYTE3 | (RT1308_DAC_SET << 4), + RT1308_DVOL_MUTE_R_EN_SFT, 1, 1); + +static const struct snd_soc_dapm_widget rt1308_dapm_widgets[] = { + /* Audio Interface */ + SND_SOC_DAPM_AIF_IN("AIF1RX", "DP1 Playback", 0, SND_SOC_NOPM, 0, 0), + + /* Supply Widgets */ + SND_SOC_DAPM_SUPPLY("MBIAS20U", + RT1308_SDW_OFFSET | (RT1308_POWER << 4), 7, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("ALDO", + RT1308_SDW_OFFSET | (RT1308_POWER << 4), 6, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("DBG", + RT1308_SDW_OFFSET | (RT1308_POWER << 4), 5, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("DACL", + RT1308_SDW_OFFSET | (RT1308_POWER << 4), 4, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("CLK25M", + RT1308_SDW_OFFSET | (RT1308_POWER << 4), 2, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("ADC_R", + RT1308_SDW_OFFSET | (RT1308_POWER << 4), 1, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("ADC_L", + RT1308_SDW_OFFSET | (RT1308_POWER << 4), 0, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("DAC Power", + RT1308_SDW_OFFSET | (RT1308_POWER << 4), 3, 0, NULL, 0), + + SND_SOC_DAPM_SUPPLY("DLDO", + RT1308_SDW_OFFSET_BYTE1 | (RT1308_POWER << 4), 5, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("VREF", + RT1308_SDW_OFFSET_BYTE1 | (RT1308_POWER << 4), 4, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("MIXER_R", + RT1308_SDW_OFFSET_BYTE1 | (RT1308_POWER << 4), 2, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("MIXER_L", + RT1308_SDW_OFFSET_BYTE1 | (RT1308_POWER << 4), 1, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("MBIAS4U", + RT1308_SDW_OFFSET_BYTE1 | (RT1308_POWER << 4), 0, 0, NULL, 0), + + SND_SOC_DAPM_SUPPLY("PLL2_LDO", + RT1308_SDW_OFFSET_BYTE2 | (RT1308_POWER << 4), 4, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("PLL2B", + RT1308_SDW_OFFSET_BYTE2 | (RT1308_POWER << 4), 3, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("PLL2F", + RT1308_SDW_OFFSET_BYTE2 | (RT1308_POWER << 4), 2, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("PLL2F2", + RT1308_SDW_OFFSET_BYTE2 | (RT1308_POWER << 4), 1, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("PLL2B2", + RT1308_SDW_OFFSET_BYTE2 | (RT1308_POWER << 4), 0, 0, NULL, 0), + + /* Digital Interface */ + SND_SOC_DAPM_DAC("DAC", NULL, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_SWITCH("DAC L", SND_SOC_NOPM, 0, 0, &rt1308_sto_dac_l), + SND_SOC_DAPM_SWITCH("DAC R", SND_SOC_NOPM, 0, 0, &rt1308_sto_dac_r), + + /* Output Lines */ + SND_SOC_DAPM_PGA_E("CLASS D", SND_SOC_NOPM, 0, 0, NULL, 0, + rt1308_classd_event, + SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMU), + SND_SOC_DAPM_OUTPUT("SPOL"), + SND_SOC_DAPM_OUTPUT("SPOR"), +}; + +static const struct snd_soc_dapm_route rt1308_dapm_routes[] = { + + { "DAC", NULL, "AIF1RX" }, + + { "DAC", NULL, "MBIAS20U" }, + { "DAC", NULL, "ALDO" }, + { "DAC", NULL, "DBG" }, + { "DAC", NULL, "DACL" }, + { "DAC", NULL, "CLK25M" }, + { "DAC", NULL, "ADC_R" }, + { "DAC", NULL, "ADC_L" }, + { "DAC", NULL, "DLDO" }, + { "DAC", NULL, "VREF" }, + { "DAC", NULL, "MIXER_R" }, + { "DAC", NULL, "MIXER_L" }, + { "DAC", NULL, "MBIAS4U" }, + { "DAC", NULL, "PLL2_LDO" }, + { "DAC", NULL, "PLL2B" }, + { "DAC", NULL, "PLL2F" }, + { "DAC", NULL, "PLL2F2" }, + { "DAC", NULL, "PLL2B2" }, + + { "DAC L", "Switch", "DAC" }, + { "DAC R", "Switch", "DAC" }, + { "DAC L", NULL, "DAC Power" }, + { "DAC R", NULL, "DAC Power" }, + + { "CLASS D", NULL, "DAC L" }, + { "CLASS D", NULL, "DAC R" }, + { "SPOL", NULL, "CLASS D" }, + { "SPOR", NULL, "CLASS D" }, +}; + +static int rt1308_set_sdw_stream(struct snd_soc_dai *dai, void *sdw_stream, + int direction) +{ + struct sdw_stream_data *stream; + + stream = kzalloc(sizeof(*stream), GFP_KERNEL); + if (!stream) + return -ENOMEM; + + stream->sdw_stream = (struct sdw_stream_runtime *)sdw_stream; + + /* Use tx_mask or rx_mask to configure stream tag and set dma_data */ + if (direction == SNDRV_PCM_STREAM_PLAYBACK) + dai->playback_dma_data = stream; + else + dai->capture_dma_data = stream; + + return 0; +} + +static void rt1308_sdw_shutdown(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct sdw_stream_data *stream; + + stream = snd_soc_dai_get_dma_data(dai, substream); + snd_soc_dai_set_dma_data(dai, substream, NULL); + kfree(stream); +} + +static int rt1308_sdw_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct rt1308_sdw_priv *rt1308 = + snd_soc_component_get_drvdata(component); + struct sdw_stream_config stream_config; + struct sdw_port_config port_config; + enum sdw_data_direction direction; + struct sdw_stream_data *stream; + int retval, port, num_channels; + + dev_dbg(dai->dev, "%s %s", __func__, dai->name); + stream = snd_soc_dai_get_dma_data(dai, substream); + + if (!stream) + return -EINVAL; + + if (!rt1308->sdw_slave) + return -EINVAL; + + /* SoundWire specific configuration */ + /* port 1 for playback */ + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + direction = SDW_DATA_DIR_RX; + port = 1; + } else { + return -EINVAL; + } + + stream_config.frame_rate = params_rate(params); + stream_config.ch_count = params_channels(params); + stream_config.bps = snd_pcm_format_width(params_format(params)); + stream_config.direction = direction; + + num_channels = params_channels(params); + port_config.ch_mask = (1 << (num_channels)) - 1; + port_config.num = port; + + retval = sdw_stream_add_slave(rt1308->sdw_slave, &stream_config, + &port_config, 1, stream->sdw_stream); + if (retval) { + dev_err(dai->dev, "Unable to configure port\n"); + return retval; + } + + return retval; +} + +static int rt1308_sdw_pcm_hw_free(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct rt1308_sdw_priv *rt1308 = + snd_soc_component_get_drvdata(component); + struct sdw_stream_data *stream = + snd_soc_dai_get_dma_data(dai, substream); + + if (!rt1308->sdw_slave) + return -EINVAL; + + sdw_stream_remove_slave(rt1308->sdw_slave, stream->sdw_stream); + return 0; +} + +/* + * slave_ops: callbacks for get_clock_stop_mode, clock_stop and + * port_prep are not defined for now + */ +static struct sdw_slave_ops rt1308_slave_ops = { + .read_prop = rt1308_read_prop, + .interrupt_callback = rt1308_interrupt_callback, + .update_status = rt1308_update_status, + .bus_config = rt1308_bus_config, +}; + +static const struct snd_soc_component_driver soc_component_sdw_rt1308 = { + .controls = rt1308_snd_controls, + .num_controls = ARRAY_SIZE(rt1308_snd_controls), + .dapm_widgets = rt1308_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(rt1308_dapm_widgets), + .dapm_routes = rt1308_dapm_routes, + .num_dapm_routes = ARRAY_SIZE(rt1308_dapm_routes), +}; + +static const struct snd_soc_dai_ops rt1308_aif_dai_ops = { + .hw_params = rt1308_sdw_hw_params, + .hw_free = rt1308_sdw_pcm_hw_free, + .set_sdw_stream = rt1308_set_sdw_stream, + .shutdown = rt1308_sdw_shutdown, +}; + +#define RT1308_STEREO_RATES SNDRV_PCM_RATE_48000 +#define RT1308_FORMATS (SNDRV_PCM_FMTBIT_S8 | \ + SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S16_LE | \ + SNDRV_PCM_FMTBIT_S24_LE) + +static struct snd_soc_dai_driver rt1308_sdw_dai[] = { + { + .name = "rt1308-aif", + .playback = { + .stream_name = "DP1 Playback", + .channels_min = 1, + .channels_max = 2, + .rates = RT1308_STEREO_RATES, + .formats = RT1308_FORMATS, + }, + .ops = &rt1308_aif_dai_ops, + }, +}; + +static int rt1308_sdw_init(struct device *dev, struct regmap *regmap, + struct sdw_slave *slave) +{ + struct rt1308_sdw_priv *rt1308; + int ret; + + rt1308 = devm_kzalloc(dev, sizeof(*rt1308), GFP_KERNEL); + if (!rt1308) + return -ENOMEM; + + dev_set_drvdata(dev, rt1308); + rt1308->sdw_slave = slave; + rt1308->regmap = regmap; + + /* + * Mark hw_init to false + * HW init will be performed when device reports present + */ + rt1308->hw_init = false; + rt1308->first_hw_init = false; + + ret = devm_snd_soc_register_component(dev, + &soc_component_sdw_rt1308, + rt1308_sdw_dai, + ARRAY_SIZE(rt1308_sdw_dai)); + + dev_dbg(&slave->dev, "%s\n", __func__); + + return ret; +} + +static int rt1308_sdw_probe(struct sdw_slave *slave, + const struct sdw_device_id *id) +{ + struct regmap *regmap; + + /* Assign ops */ + slave->ops = &rt1308_slave_ops; + + /* Regmap Initialization */ + regmap = devm_regmap_init_sdw(slave, &rt1308_sdw_regmap); + if (!regmap) + return -EINVAL; + + rt1308_sdw_init(&slave->dev, regmap, slave); + + return 0; +} + +static const struct sdw_device_id rt1308_id[] = { + SDW_SLAVE_ENTRY(0x025d, 0x1308, 0), + {}, +}; +MODULE_DEVICE_TABLE(sdw, rt1308_id); + +static int rt1308_dev_suspend(struct device *dev) +{ + struct rt1308_sdw_priv *rt1308 = dev_get_drvdata(dev); + + if (!rt1308->hw_init) + return 0; + + regcache_cache_only(rt1308->regmap, true); + + return 0; +} + +#define RT1308_PROBE_TIMEOUT 2000 + +static int rt1308_dev_resume(struct device *dev) +{ + struct sdw_slave *slave = dev_to_sdw_dev(dev); + struct rt1308_sdw_priv *rt1308 = dev_get_drvdata(dev); + unsigned long time; + + if (!rt1308->hw_init) + return 0; + + if (!slave->unattach_request) + goto regmap_sync; + + time = wait_for_completion_timeout(&slave->initialization_complete, + msecs_to_jiffies(RT1308_PROBE_TIMEOUT)); + if (!time) { + dev_err(&slave->dev, "Initialization not complete, timed out\n"); + return -ETIMEDOUT; + } + +regmap_sync: + slave->unattach_request = 0; + regcache_cache_only(rt1308->regmap, false); + regcache_sync_region(rt1308->regmap, 0xc000, 0xcfff); + + return 0; +} + +static const struct dev_pm_ops rt1308_pm = { + SET_SYSTEM_SLEEP_PM_OPS(rt1308_dev_suspend, rt1308_dev_resume) + SET_RUNTIME_PM_OPS(rt1308_dev_suspend, rt1308_dev_resume, NULL) +}; + +static struct sdw_driver rt1308_sdw_driver = { + .driver = { + .name = "rt1308", + .owner = THIS_MODULE, + .pm = &rt1308_pm, + }, + .probe = rt1308_sdw_probe, + .ops = &rt1308_slave_ops, + .id_table = rt1308_id, +}; +module_sdw_driver(rt1308_sdw_driver); + +MODULE_DESCRIPTION("ASoC RT1308 driver SDW"); +MODULE_AUTHOR("Shuming Fan shumingf@realtek.com"); +MODULE_LICENSE("GPL v2"); diff --git a/sound/soc/codecs/rt1308-sdw.h b/sound/soc/codecs/rt1308-sdw.h new file mode 100644 index 000000000000..c9341e70d6cf --- /dev/null +++ b/sound/soc/codecs/rt1308-sdw.h @@ -0,0 +1,169 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * rt1308-sdw.h -- RT1308 ALSA SoC audio driver header + * + * Copyright(c) 2019 Realtek Semiconductor Corp. + */ + +#ifndef __RT1308_SDW_H__ +#define __RT1308_SDW_H__ + +static const struct reg_default rt1308_reg_defaults[] = { + { 0x0000, 0x00 }, + { 0x0001, 0x00 }, + { 0x0002, 0x00 }, + { 0x0003, 0x00 }, + { 0x0004, 0x00 }, + { 0x0005, 0x01 }, + { 0x0020, 0x00 }, + { 0x0022, 0x00 }, + { 0x0023, 0x00 }, + { 0x0024, 0x00 }, + { 0x0025, 0x00 }, + { 0x0026, 0x00 }, + { 0x0030, 0x00 }, + { 0x0032, 0x00 }, + { 0x0033, 0x00 }, + { 0x0034, 0x00 }, + { 0x0035, 0x00 }, + { 0x0036, 0x00 }, + { 0x0040, 0x00 }, + { 0x0041, 0x00 }, + { 0x0042, 0x00 }, + { 0x0043, 0x00 }, + { 0x0044, 0x20 }, + { 0x0045, 0x01 }, + { 0x0046, 0x01 }, + { 0x0048, 0x00 }, + { 0x0049, 0x00 }, + { 0x0050, 0x20 }, + { 0x0051, 0x02 }, + { 0x0052, 0x5D }, + { 0x0053, 0x13 }, + { 0x0054, 0x08 }, + { 0x0055, 0x00 }, + { 0x0060, 0x00 }, + { 0x0070, 0x00 }, + { 0x00E0, 0x00 }, + { 0x00F0, 0x00 }, + { 0x0100, 0x00 }, + { 0x0101, 0x00 }, + { 0x0102, 0x20 }, + { 0x0103, 0x00 }, + { 0x0104, 0x00 }, + { 0x0105, 0x03 }, + { 0x0120, 0x00 }, + { 0x0122, 0x00 }, + { 0x0123, 0x00 }, + { 0x0124, 0x00 }, + { 0x0125, 0x00 }, + { 0x0126, 0x00 }, + { 0x0127, 0x00 }, + { 0x0130, 0x00 }, + { 0x0132, 0x00 }, + { 0x0133, 0x00 }, + { 0x0134, 0x00 }, + { 0x0135, 0x00 }, + { 0x0136, 0x00 }, + { 0x0137, 0x00 }, + { 0x0200, 0x00 }, + { 0x0201, 0x00 }, + { 0x0202, 0x00 }, + { 0x0203, 0x00 }, + { 0x0204, 0x00 }, + { 0x0205, 0x03 }, + { 0x0220, 0x00 }, + { 0x0222, 0x00 }, + { 0x0223, 0x00 }, + { 0x0224, 0x00 }, + { 0x0225, 0x00 }, + { 0x0226, 0x00 }, + { 0x0227, 0x00 }, + { 0x0230, 0x00 }, + { 0x0232, 0x00 }, + { 0x0233, 0x00 }, + { 0x0234, 0x00 }, + { 0x0235, 0x00 }, + { 0x0236, 0x00 }, + { 0x0237, 0x00 }, + { 0x0400, 0x00 }, + { 0x0401, 0x00 }, + { 0x0402, 0x00 }, + { 0x0403, 0x00 }, + { 0x0404, 0x00 }, + { 0x0405, 0x03 }, + { 0x0420, 0x00 }, + { 0x0422, 0x00 }, + { 0x0423, 0x00 }, + { 0x0424, 0x00 }, + { 0x0425, 0x00 }, + { 0x0426, 0x00 }, + { 0x0427, 0x00 }, + { 0x0430, 0x00 }, + { 0x0432, 0x00 }, + { 0x0433, 0x00 }, + { 0x0434, 0x00 }, + { 0x0435, 0x00 }, + { 0x0436, 0x00 }, + { 0x0437, 0x00 }, + { 0x0f00, 0x00 }, + { 0x0f01, 0x00 }, + { 0x0f02, 0x00 }, + { 0x0f03, 0x00 }, + { 0x0f04, 0x00 }, + { 0x0f05, 0x00 }, + { 0x0f20, 0x00 }, + { 0x0f22, 0x00 }, + { 0x0f23, 0x00 }, + { 0x0f24, 0x00 }, + { 0x0f25, 0x00 }, + { 0x0f26, 0x00 }, + { 0x0f27, 0x00 }, + { 0x0f30, 0x00 }, + { 0x0f32, 0x00 }, + { 0x0f33, 0x00 }, + { 0x0f34, 0x00 }, + { 0x0f35, 0x00 }, + { 0x0f36, 0x00 }, + { 0x0f37, 0x00 }, + { 0x2f01, 0x01 }, + { 0x2f02, 0x09 }, + { 0x2f03, 0x00 }, + { 0x2f04, 0x0f }, + { 0x2f05, 0x0b }, + { 0x2f06, 0x01 }, + { 0x2f07, 0x8e }, + { 0x3000, 0x00 }, + { 0x3001, 0x00 }, + { 0x3004, 0x01 }, + { 0x3005, 0x23 }, + { 0x3008, 0x02 }, + { 0x300a, 0x00 }, + { 0xc003 | (RT1308_DAC_SET << 4), 0x00 }, + { 0xc001 | (RT1308_POWER << 4), 0x00 }, + { 0xc002 | (RT1308_POWER << 4), 0x00 }, +}; + +#define RT1308_SDW_OFFSET 0xc000 +#define RT1308_SDW_OFFSET_BYTE0 0xc000 +#define RT1308_SDW_OFFSET_BYTE1 0xc001 +#define RT1308_SDW_OFFSET_BYTE2 0xc002 +#define RT1308_SDW_OFFSET_BYTE3 0xc003 + +#define RT1308_SDW_RESET (RT1308_SDW_OFFSET | (RT1308_RESET << 4)) + +struct rt1308_sdw_priv { + struct snd_soc_component *component; + struct regmap *regmap; + struct sdw_slave *sdw_slave; + enum sdw_slave_status status; + struct sdw_bus_params params; + bool hw_init; + bool first_hw_init; +}; + +struct sdw_stream_data { + struct sdw_stream_runtime *sdw_stream; +}; + +#endif /* __RT1308_SDW_H__ */