On Thu, Mar 10, 2016 at 12:25:00PM +0100, Petr Kulhavy wrote:

This adds the TAS5721 into the TAS571x binding.

Signed-off-by: Petr Kulhavy petr@barix.com

Documentation/devicetree/bindings/sound/tas571x.txt | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/sound/tas571x.txt b/Documentation/devicetree/bindings/sound/tas571x.txt index 0ac31d8..f1aade3 100644 --- a/Documentation/devicetree/bindings/sound/tas571x.txt +++ b/Documentation/devicetree/bindings/sound/tas571x.txt @@ -1,4 +1,4 @@ -Texas Instruments TAS5711/TAS5717/TAS5719 stereo power amplifiers +Texas Instruments TAS5711/TAS5717/TAS5719/TAS5721 stereo power amplifiers

The codec is controlled through an I2C interface. It also has two other signals that can be wired up to GPIOs: reset (strongly recommended), and @@ -6,7 +6,7 @@ powerdown (optional).

Required properties:

-- compatible: "ti,tas5711", "ti,tas5717", or "ti,tas5719" +- compatible: "ti,tas5711", "ti,tas5717", or "ti,tas5719", "ti,tas5721"

The "or" is in the wrong place. Please reformat to 1 compatible per line (unless more than 1 in the DT is valid).

• reg: The I2C address of the device
• #sound-dai-cells: must be equal to 0

@@ -25,6 +25,8 @@ Optional properties:

• PVDD_B-supply: regulator phandle for the PVDD_B supply (5711)
• PVDD_C-supply: regulator phandle for the PVDD_C supply (5711)
• PVDD_D-supply: regulator phandle for the PVDD_D supply (5711)

+- DRVDD-supply: regulator phandle for the DRVDD supply (5721) +- PVDD-supply: regulator phandle for the PVDD supply (5721)

Example:

-- 1.9.1