This patch adds DT bindings documentation for ROHM BD28623MUV class D speaker amplifier.

Signed-off-by: Katsuhiro Suzuki suzuki.katsuhiro@socionext.com --- .../devicetree/bindings/sound/rohm,bd28623.txt | 26 ++++++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/rohm,bd28623.txt

diff --git a/Documentation/devicetree/bindings/sound/rohm,bd28623.txt b/Documentation/devicetree/bindings/sound/rohm,bd28623.txt new file mode 100644 index 000000000000..954c689b5b08 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/rohm,bd28623.txt @@ -0,0 +1,26 @@ +ROHM BD28623MUV Class D speaker amplifier for digital input + +This codec does not have any control buses such as I2C, it detect format and +rate of I2S signal automatically. It has two signals that can be connected +to GPIOs: reset and mute. + +Required properties: +- compatible : should be "rohm,bd28623" +- #sound-dai-cells: should be 0. +- reset-gpios : GPIO specifier for the active low reset line +- mute-gpios : GPIO specifier for the active low mute line + +Optional properties: +- VCCA-supply : regulator phandle for the VCCA supply +- VCCP1-supply: regulator phandle for the VCCP1 supply +- VCCP2-supply: regulator phandle for the VCCP2 supply + +Example: + + codec { + compatible = "rohm,bd28623"; + #sound-dai-cells = <0>; + + reset-gpios = <&gpio 0 GPIO_ACTIVE_LOW>; + mute-gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + };

This patch adds support of the ROHM BD28623MUV Class D speaker amplifier for Flat-panel TVs. This IC delivers an output power of 20W + 20W.

Signed-off-by: Katsuhiro Suzuki suzuki.katsuhiro@socionext.com --- sound/soc/codecs/Kconfig | 8 ++ sound/soc/codecs/Makefile | 2 + sound/soc/codecs/bd28623.c | 258 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 268 insertions(+) create mode 100644 sound/soc/codecs/bd28623.c

diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index f72a90104a58..6a53e188ead6 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -47,6 +47,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_ALC5623 if I2C select SND_SOC_ALC5632 if I2C select SND_SOC_BT_SCO + select SND_SOC_BD28623 select SND_SOC_CQ0093VC select SND_SOC_CS35L32 if I2C select SND_SOC_CS35L33 if I2C @@ -418,6 +419,13 @@ config SND_SOC_ALC5623 config SND_SOC_ALC5632 tristate

+config SND_SOC_BD28623 + tristate "ROHM BD28623 CODEC" + help + Enable support for ROHM BD28623MUV Class D speaker amplifier. + This codec does not have any control buses such as I2C, it + detect format of I2S automatically. + config SND_SOC_BT_SCO tristate "Dummy BT SCO codec driver"

diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 56c3252820d2..f2c710e16557 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -37,6 +37,7 @@ snd-soc-ak4671-objs := ak4671.o snd-soc-ak5386-objs := ak5386.o snd-soc-ak5558-objs := ak5558.o snd-soc-arizona-objs := arizona.o +snd-soc-bd28623-objs := bd28623.o snd-soc-bt-sco-objs := bt-sco.o snd-soc-cq93vc-objs := cq93vc.o snd-soc-cs35l32-objs := cs35l32.o @@ -285,6 +286,7 @@ obj-$(CONFIG_SND_SOC_AK5558) += snd-soc-ak5558.o obj-$(CONFIG_SND_SOC_ALC5623) += snd-soc-alc5623.o obj-$(CONFIG_SND_SOC_ALC5632) += snd-soc-alc5632.o obj-$(CONFIG_SND_SOC_ARIZONA) += snd-soc-arizona.o +obj-$(CONFIG_SND_SOC_BD28623) += snd-soc-bd28623.o obj-$(CONFIG_SND_SOC_BT_SCO) += snd-soc-bt-sco.o obj-$(CONFIG_SND_SOC_CQ0093VC) += snd-soc-cq93vc.o obj-$(CONFIG_SND_SOC_CS35L32) += snd-soc-cs35l32.o diff --git a/sound/soc/codecs/bd28623.c b/sound/soc/codecs/bd28623.c new file mode 100644 index 000000000000..672c8e790e24 --- /dev/null +++ b/sound/soc/codecs/bd28623.c @@ -0,0 +1,258 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * ROHM BD28623MUV class D speaker amplifier codec driver. + * + * Copyright (c) 2018 Socionext Inc. + */ + +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/regulator/consumer.h> +#include <sound/pcm.h> +#include <sound/soc.h> + +#define BD28623_NUM_SUPPLIES 3 + +static const char *const bd28623_supply_names[BD28623_NUM_SUPPLIES] = { + "VCCA", + "VCCP1", + "VCCP2", +}; + +struct bd28623_priv { + struct platform_device *pdev; + struct regulator_bulk_data supplies[BD28623_NUM_SUPPLIES]; + struct gpio_desc *reset_gpio; + struct gpio_desc *mute_gpio; + + int switch_spk; +}; + +static const struct snd_soc_dapm_widget bd28623_widgets[] = { + SND_SOC_DAPM_DAC("DAC", "Playback", SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_OUTPUT("OUT1P"), + SND_SOC_DAPM_OUTPUT("OUT1N"), + SND_SOC_DAPM_OUTPUT("OUT2P"), + SND_SOC_DAPM_OUTPUT("OUT2N"), +}; + +static const struct snd_soc_dapm_route bd28623_routes[] = { + { "OUT1P", NULL, "DAC" }, + { "OUT1N", NULL, "DAC" }, + { "OUT2P", NULL, "DAC" }, + { "OUT2N", NULL, "DAC" }, +}; + +static int bd28623_power_on(struct bd28623_priv *bd) +{ + struct device *dev = &bd->pdev->dev; + int ret; + + ret = regulator_bulk_enable(ARRAY_SIZE(bd->supplies), bd->supplies); + if (ret) { + dev_err(dev, "Failed to enable supplies: %d\n", ret); + return ret; + } + + gpiod_set_value(bd->reset_gpio, 0); + usleep_range(300000, 400000); + + return 0; +} + +static void bd28623_power_off(struct bd28623_priv *bd) +{ + gpiod_set_value(bd->reset_gpio, 1); + + regulator_bulk_disable(ARRAY_SIZE(bd->supplies), bd->supplies); +} + +static int bd28623_update_switch_spk(struct bd28623_priv *bd) +{ + if (bd->switch_spk) + gpiod_set_value(bd->mute_gpio, 0); + else + gpiod_set_value(bd->mute_gpio, 1); + + return 0; +} + +static int bd28623_get_switch_spk(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct bd28623_priv *bd = snd_soc_component_get_drvdata(component); + + ucontrol->value.integer.value[0] = bd->switch_spk; + + return 0; +} + +static int bd28623_set_switch_spk(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct bd28623_priv *bd = snd_soc_component_get_drvdata(component); + + if (bd->switch_spk == ucontrol->value.integer.value[0]) + return 0; + + bd->switch_spk = ucontrol->value.integer.value[0]; + + return bd28623_update_switch_spk(bd); +} + +static const struct snd_kcontrol_new bd28623_controls[] = { + SOC_SINGLE_BOOL_EXT("Speaker Switch", 0, + bd28623_get_switch_spk, bd28623_set_switch_spk), +}; + +static int bd28623_codec_probe(struct snd_soc_component *component) +{ + struct bd28623_priv *bd = snd_soc_component_get_drvdata(component); + int ret; + + bd->switch_spk = 1; + + ret = bd28623_power_on(bd); + if (ret) + return ret; + + bd28623_update_switch_spk(bd); + + return 0; +} + +static int bd28623_codec_suspend(struct snd_soc_component *component) +{ + struct bd28623_priv *bd = snd_soc_component_get_drvdata(component); + + bd28623_power_off(bd); + + return 0; +} + +static int bd28623_codec_resume(struct snd_soc_component *component) +{ + struct bd28623_priv *bd = snd_soc_component_get_drvdata(component); + int ret; + + ret = bd28623_power_on(bd); + if (ret) + return ret; + + bd28623_update_switch_spk(bd); + + return 0; +} + +static const struct snd_soc_component_driver soc_codec_bd = { + .probe = bd28623_codec_probe, + .suspend = bd28623_codec_suspend, + .resume = bd28623_codec_resume, + .dapm_widgets = bd28623_widgets, + .num_dapm_widgets = ARRAY_SIZE(bd28623_widgets), + .dapm_routes = bd28623_routes, + .num_dapm_routes = ARRAY_SIZE(bd28623_routes), + .controls = bd28623_controls, + .num_controls = ARRAY_SIZE(bd28623_controls), + .idle_bias_on = 1, + .use_pmdown_time = 1, + .endianness = 1, + .non_legacy_dai_naming = 1, +}; + +static struct snd_soc_dai_driver soc_dai_bd = { + .name = "bd28623-speaker", + .playback = { + .stream_name = "Playback", + .formats = SNDRV_PCM_FMTBIT_S32_LE | + SNDRV_PCM_FMTBIT_S24_LE | + SNDRV_PCM_FMTBIT_S16_LE, + .rates = SNDRV_PCM_RATE_48000 | + SNDRV_PCM_RATE_44100 | + SNDRV_PCM_RATE_32000, + .channels_min = 2, + .channels_max = 2, + }, +}; + +static int bd28623_probe(struct platform_device *pdev) +{ + struct bd28623_priv *bd; + struct device *dev = &pdev->dev; + int i, ret; + + bd = devm_kzalloc(&pdev->dev, sizeof(struct bd28623_priv), GFP_KERNEL); + if (!bd) + return -ENOMEM; + + for (i = 0; i < ARRAY_SIZE(bd->supplies); i++) + bd->supplies[i].supply = bd28623_supply_names[i]; + + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(bd->supplies), + bd->supplies); + if (ret) { + dev_err(dev, "Failed to get supplies: %d\n", ret); + return ret; + } + + bd->reset_gpio = devm_gpiod_get_optional(dev, "reset", + GPIOD_OUT_HIGH); + if (IS_ERR(bd->reset_gpio)) { + dev_err(dev, "Failed to request reset_gpio: %ld\n", + PTR_ERR(bd->reset_gpio)); + return PTR_ERR(bd->reset_gpio); + } + + bd->mute_gpio = devm_gpiod_get_optional(dev, "mute", + GPIOD_OUT_HIGH); + if (IS_ERR(bd->mute_gpio)) { + dev_err(dev, "Failed to request mute_gpio: %ld\n", + PTR_ERR(bd->mute_gpio)); + return PTR_ERR(bd->mute_gpio); + } + + platform_set_drvdata(pdev, bd); + bd->pdev = pdev; + + ret = devm_snd_soc_register_component(dev, &soc_codec_bd, + &soc_dai_bd, 1); + if (ret) + return ret; + + return 0; +} + +static int bd28623_remove(struct platform_device *pdev) +{ + struct bd28623_priv *bd = platform_get_drvdata(pdev); + + regulator_bulk_disable(ARRAY_SIZE(bd->supplies), bd->supplies); + + return 0; +} + +static const struct of_device_id bd28623_of_match[] = { + { .compatible = "rohm,bd28623", }, + {} +}; +MODULE_DEVICE_TABLE(of, bd28623_of_match); + +static struct platform_driver bd28623_codec_driver = { + .driver = { + .name = "bd28623", + .of_match_table = of_match_ptr(bd28623_of_match), + }, + .probe = bd28623_probe, + .remove = bd28623_remove, +}; +module_platform_driver(bd28623_codec_driver); + +MODULE_AUTHOR("Katsuhiro Suzuki suzuki.katsuhiro@socionext.com"); +MODULE_DESCRIPTION("ROHM BD28623 speaker amplifier driver"); +MODULE_LICENSE("GPL v2");