[alsa-devel] [PATCH 01/12] ASoC: ak4535: Cleanup manual bias level transitions
Set the CODEC driver's suspend_bias_off flag rather than manually going to SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes the code a bit shorter and cleaner.
Since the ASoC core now takes care of setting the bias level to SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually anymore either.
The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe() can also be removed as the core will automatically do this after the CODEC has been probed.
Signed-off-by: Lars-Peter Clausen lars@metafoo.de --- sound/soc/codecs/ak4535.c | 21 ++------------------- 1 file changed, 2 insertions(+), 19 deletions(-)
diff --git a/sound/soc/codecs/ak4535.c b/sound/soc/codecs/ak4535.c index 30e2978..eced46d 100644 --- a/sound/soc/codecs/ak4535.c +++ b/sound/soc/codecs/ak4535.c @@ -373,36 +373,19 @@ static struct snd_soc_dai_driver ak4535_dai = { .ops = &ak4535_dai_ops, };
-static int ak4535_suspend(struct snd_soc_codec *codec) -{ - ak4535_set_bias_level(codec, SND_SOC_BIAS_OFF); - return 0; -} - static int ak4535_resume(struct snd_soc_codec *codec) { snd_soc_cache_sync(codec); - ak4535_set_bias_level(codec, SND_SOC_BIAS_STANDBY); return 0; }
static int ak4535_probe(struct snd_soc_codec *codec) { - /* power on device */ - ak4535_set_bias_level(codec, SND_SOC_BIAS_STANDBY); - snd_soc_add_codec_controls(codec, ak4535_snd_controls, ARRAY_SIZE(ak4535_snd_controls)); return 0; }
-/* power down chip */ -static int ak4535_remove(struct snd_soc_codec *codec) -{ - ak4535_set_bias_level(codec, SND_SOC_BIAS_OFF); - return 0; -} - static const struct regmap_config ak4535_regmap = { .reg_bits = 8, .val_bits = 8, @@ -417,10 +400,10 @@ static const struct regmap_config ak4535_regmap = {
static struct snd_soc_codec_driver soc_codec_dev_ak4535 = { .probe = ak4535_probe, - .remove = ak4535_remove, - .suspend = ak4535_suspend, .resume = ak4535_resume, .set_bias_level = ak4535_set_bias_level, + .suspend_bias_off = true, + .dapm_widgets = ak4535_dapm_widgets, .num_dapm_widgets = ARRAY_SIZE(ak4535_dapm_widgets), .dapm_routes = ak4535_audio_map,
Makes the code slightly shorter and cleaner.
Signed-off-by: Lars-Peter Clausen lars@metafoo.de --- sound/soc/codecs/ak4535.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-)
diff --git a/sound/soc/codecs/ak4535.c b/sound/soc/codecs/ak4535.c index eced46d..9130d91 100644 --- a/sound/soc/codecs/ak4535.c +++ b/sound/soc/codecs/ak4535.c @@ -379,13 +379,6 @@ static int ak4535_resume(struct snd_soc_codec *codec) return 0; }
-static int ak4535_probe(struct snd_soc_codec *codec) -{ - snd_soc_add_codec_controls(codec, ak4535_snd_controls, - ARRAY_SIZE(ak4535_snd_controls)); - return 0; -} - static const struct regmap_config ak4535_regmap = { .reg_bits = 8, .val_bits = 8, @@ -399,11 +392,12 @@ static const struct regmap_config ak4535_regmap = { };
static struct snd_soc_codec_driver soc_codec_dev_ak4535 = { - .probe = ak4535_probe, .resume = ak4535_resume, .set_bias_level = ak4535_set_bias_level, .suspend_bias_off = true,
+ .controls = ak4535_snd_controls, + .num_controls = ARRAY_SIZE(ak4535_snd_controls), .dapm_widgets = ak4535_dapm_widgets, .num_dapm_widgets = ARRAY_SIZE(ak4535_dapm_widgets), .dapm_routes = ak4535_audio_map,
Set the CODEC driver's suspend_bias_off flag rather than manually going to SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes the code a bit shorter and cleaner.
Since the ASoC core now takes care of setting the bias level to SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually anymore either.
The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe() can also be removed as the core will automatically do this after the CODEC has been probed.
Signed-off-by: Lars-Peter Clausen lars@metafoo.de --- sound/soc/codecs/ak4641.c | 33 +-------------------------------- 1 file changed, 1 insertion(+), 32 deletions(-)
diff --git a/sound/soc/codecs/ak4641.c b/sound/soc/codecs/ak4641.c index 7afe8f4..70861c7 100644 --- a/sound/soc/codecs/ak4641.c +++ b/sound/soc/codecs/ak4641.c @@ -505,39 +505,7 @@ static struct snd_soc_dai_driver ak4641_dai[] = { }, };
-static int ak4641_suspend(struct snd_soc_codec *codec) -{ - ak4641_set_bias_level(codec, SND_SOC_BIAS_OFF); - return 0; -} - -static int ak4641_resume(struct snd_soc_codec *codec) -{ - ak4641_set_bias_level(codec, SND_SOC_BIAS_STANDBY); - return 0; -} - -static int ak4641_probe(struct snd_soc_codec *codec) -{ - /* power on device */ - ak4641_set_bias_level(codec, SND_SOC_BIAS_STANDBY); - - return 0; -} - -static int ak4641_remove(struct snd_soc_codec *codec) -{ - ak4641_set_bias_level(codec, SND_SOC_BIAS_OFF); - - return 0; -} - - static struct snd_soc_codec_driver soc_codec_dev_ak4641 = { - .probe = ak4641_probe, - .remove = ak4641_remove, - .suspend = ak4641_suspend, - .resume = ak4641_resume, .controls = ak4641_snd_controls, .num_controls = ARRAY_SIZE(ak4641_snd_controls), .dapm_widgets = ak4641_dapm_widgets, @@ -545,6 +513,7 @@ static struct snd_soc_codec_driver soc_codec_dev_ak4641 = { .dapm_routes = ak4641_audio_map, .num_dapm_routes = ARRAY_SIZE(ak4641_audio_map), .set_bias_level = ak4641_set_bias_level, + .suspend_bias_off = true, };
static const struct regmap_config ak4641_regmap = {
Since the ASoC core now takes care of setting the bias level to SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually anymore either.
The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe() can also be removed as the core will automatically do this after the CODEC has been probed.
Signed-off-by: Lars-Peter Clausen lars@metafoo.de --- sound/soc/codecs/ak4642.c | 16 ---------------- 1 file changed, 16 deletions(-)
diff --git a/sound/soc/codecs/ak4642.c b/sound/soc/codecs/ak4642.c index 0417125..dde8b49 100644 --- a/sound/soc/codecs/ak4642.c +++ b/sound/soc/codecs/ak4642.c @@ -491,23 +491,7 @@ static int ak4642_resume(struct snd_soc_codec *codec) return 0; }
- -static int ak4642_probe(struct snd_soc_codec *codec) -{ - ak4642_set_bias_level(codec, SND_SOC_BIAS_STANDBY); - - return 0; -} - -static int ak4642_remove(struct snd_soc_codec *codec) -{ - ak4642_set_bias_level(codec, SND_SOC_BIAS_OFF); - return 0; -} - static struct snd_soc_codec_driver soc_codec_dev_ak4642 = { - .probe = ak4642_probe, - .remove = ak4642_remove, .resume = ak4642_resume, .set_bias_level = ak4642_set_bias_level, .controls = ak4642_snd_controls,
Since the ASoC core now takes care of setting the bias level to SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually anymore either.
The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe() can also be removed as the core will automatically do this after the CODEC has been probed.
Signed-off-by: Lars-Peter Clausen lars@metafoo.de --- sound/soc/codecs/ak4671.c | 13 ------------- 1 file changed, 13 deletions(-)
diff --git a/sound/soc/codecs/ak4671.c b/sound/soc/codecs/ak4671.c index 998fa0c..686cacb 100644 --- a/sound/soc/codecs/ak4671.c +++ b/sound/soc/codecs/ak4671.c @@ -611,20 +611,7 @@ static struct snd_soc_dai_driver ak4671_dai = { .ops = &ak4671_dai_ops, };
-static int ak4671_probe(struct snd_soc_codec *codec) -{ - return ak4671_set_bias_level(codec, SND_SOC_BIAS_STANDBY); -} - -static int ak4671_remove(struct snd_soc_codec *codec) -{ - ak4671_set_bias_level(codec, SND_SOC_BIAS_OFF); - return 0; -} - static struct snd_soc_codec_driver soc_codec_dev_ak4671 = { - .probe = ak4671_probe, - .remove = ak4671_remove, .set_bias_level = ak4671_set_bias_level, .controls = ak4671_snd_controls, .num_controls = ARRAY_SIZE(ak4671_snd_controls),
Set the CODEC driver's suspend_bias_off flag rather than manually going to SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes the code a bit shorter and cleaner.
Since the ASoC core now takes care of setting the bias level to SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually anymore either.
The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe() can also be removed as the core will automatically do this after the CODEC has been probed.
Signed-off-by: Lars-Peter Clausen lars@metafoo.de --- sound/soc/codecs/max98088.c | 27 ++------------------------- 1 file changed, 2 insertions(+), 25 deletions(-)
diff --git a/sound/soc/codecs/max98088.c b/sound/soc/codecs/max98088.c index 2cd3e54..bb892b3 100644 --- a/sound/soc/codecs/max98088.c +++ b/sound/soc/codecs/max98088.c @@ -1887,25 +1887,6 @@ static void max98088_handle_pdata(struct snd_soc_codec *codec) max98088_handle_eq_pdata(codec); }
-#ifdef CONFIG_PM -static int max98088_suspend(struct snd_soc_codec *codec) -{ - max98088_set_bias_level(codec, SND_SOC_BIAS_OFF); - - return 0; -} - -static int max98088_resume(struct snd_soc_codec *codec) -{ - max98088_set_bias_level(codec, SND_SOC_BIAS_STANDBY); - - return 0; -} -#else -#define max98088_suspend NULL -#define max98088_resume NULL -#endif - static int max98088_probe(struct snd_soc_codec *codec) { struct max98088_priv *max98088 = snd_soc_codec_get_drvdata(codec); @@ -1946,9 +1927,6 @@ static int max98088_probe(struct snd_soc_codec *codec)
snd_soc_write(codec, M98088_REG_51_PWR_SYS, M98088_PWRSV);
- /* initialize registers cache to hardware default */ - max98088_set_bias_level(codec, SND_SOC_BIAS_STANDBY); - snd_soc_write(codec, M98088_REG_0F_IRQ_ENABLE, 0x00);
snd_soc_write(codec, M98088_REG_22_MIX_DAC, @@ -1974,7 +1952,6 @@ static int max98088_remove(struct snd_soc_codec *codec) { struct max98088_priv *max98088 = snd_soc_codec_get_drvdata(codec);
- max98088_set_bias_level(codec, SND_SOC_BIAS_OFF); kfree(max98088->eq_texts);
return 0; @@ -1983,9 +1960,9 @@ static int max98088_remove(struct snd_soc_codec *codec) static struct snd_soc_codec_driver soc_codec_dev_max98088 = { .probe = max98088_probe, .remove = max98088_remove, - .suspend = max98088_suspend, - .resume = max98088_resume, .set_bias_level = max98088_set_bias_level, + .suspend_bias_off = true, + .controls = max98088_snd_controls, .num_controls = ARRAY_SIZE(max98088_snd_controls), .dapm_widgets = max98088_dapm_widgets,
Since the ASoC core now takes care of setting the bias level to SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually anymore either.
The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe() can also be removed as the core will automatically do this after the CODEC has been probed.
Signed-off-by: Lars-Peter Clausen lars@metafoo.de --- sound/soc/codecs/max98095.c | 5 ----- 1 file changed, 5 deletions(-)
diff --git a/sound/soc/codecs/max98095.c b/sound/soc/codecs/max98095.c index 0ee6797..42103ca 100644 --- a/sound/soc/codecs/max98095.c +++ b/sound/soc/codecs/max98095.c @@ -2317,9 +2317,6 @@ static int max98095_probe(struct snd_soc_codec *codec)
snd_soc_write(codec, M98095_097_PWR_SYS, M98095_PWRSV);
- /* initialize registers cache to hardware default */ - max98095_set_bias_level(codec, SND_SOC_BIAS_STANDBY); - snd_soc_write(codec, M98095_048_MIX_DAC_LR, M98095_DAI1L_TO_DACL|M98095_DAI1R_TO_DACR);
@@ -2359,8 +2356,6 @@ static int max98095_remove(struct snd_soc_codec *codec) struct max98095_priv *max98095 = snd_soc_codec_get_drvdata(codec); struct i2c_client *client = to_i2c_client(codec->dev);
- max98095_set_bias_level(codec, SND_SOC_BIAS_OFF); - if (max98095->headphone_jack || max98095->mic_jack) max98095_jack_detect_disable(codec);
Set the CODEC driver's suspend_bias_off flag rather than manually going to SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes the code a bit shorter and cleaner.
Signed-off-by: Lars-Peter Clausen lars@metafoo.de --- sound/soc/codecs/max9850.c | 22 +--------------------- 1 file changed, 1 insertion(+), 21 deletions(-)
diff --git a/sound/soc/codecs/max9850.c b/sound/soc/codecs/max9850.c index 4fdf5aa..10f8e47 100644 --- a/sound/soc/codecs/max9850.c +++ b/sound/soc/codecs/max9850.c @@ -291,25 +291,6 @@ static struct snd_soc_dai_driver max9850_dai = { .ops = &max9850_dai_ops, };
-#ifdef CONFIG_PM -static int max9850_suspend(struct snd_soc_codec *codec) -{ - max9850_set_bias_level(codec, SND_SOC_BIAS_OFF); - - return 0; -} - -static int max9850_resume(struct snd_soc_codec *codec) -{ - max9850_set_bias_level(codec, SND_SOC_BIAS_STANDBY); - - return 0; -} -#else -#define max9850_suspend NULL -#define max9850_resume NULL -#endif - static int max9850_probe(struct snd_soc_codec *codec) { /* enable zero-detect */ @@ -324,9 +305,8 @@ static int max9850_probe(struct snd_soc_codec *codec)
static struct snd_soc_codec_driver soc_codec_dev_max9850 = { .probe = max9850_probe, - .suspend = max9850_suspend, - .resume = max9850_resume, .set_bias_level = max9850_set_bias_level, + .suspend_bias_off = true,
.controls = max9850_controls, .num_controls = ARRAY_SIZE(max9850_controls),
Set the CODEC driver's suspend_bias_off flag rather than manually going to SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes the code a bit shorter and cleaner.
Since the ASoC core now takes care of setting the bias level to SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually anymore either.
Signed-off-by: Lars-Peter Clausen lars@metafoo.de --- sound/soc/codecs/sta32x.c | 21 +-------------------- 1 file changed, 1 insertion(+), 20 deletions(-)
diff --git a/sound/soc/codecs/sta32x.c b/sound/soc/codecs/sta32x.c index 4874085..7e18200 100644 --- a/sound/soc/codecs/sta32x.c +++ b/sound/soc/codecs/sta32x.c @@ -833,23 +833,6 @@ static struct snd_soc_dai_driver sta32x_dai = { .ops = &sta32x_dai_ops, };
-#ifdef CONFIG_PM -static int sta32x_suspend(struct snd_soc_codec *codec) -{ - sta32x_set_bias_level(codec, SND_SOC_BIAS_OFF); - return 0; -} - -static int sta32x_resume(struct snd_soc_codec *codec) -{ - sta32x_set_bias_level(codec, SND_SOC_BIAS_STANDBY); - return 0; -} -#else -#define sta32x_suspend NULL -#define sta32x_resume NULL -#endif - static int sta32x_probe(struct snd_soc_codec *codec) { struct sta32x_priv *sta32x = snd_soc_codec_get_drvdata(codec); @@ -936,7 +919,6 @@ static int sta32x_remove(struct snd_soc_codec *codec) struct sta32x_priv *sta32x = snd_soc_codec_get_drvdata(codec);
sta32x_watchdog_stop(sta32x); - sta32x_set_bias_level(codec, SND_SOC_BIAS_OFF); regulator_bulk_disable(ARRAY_SIZE(sta32x->supplies), sta32x->supplies);
return 0; @@ -955,9 +937,8 @@ static bool sta32x_reg_is_volatile(struct device *dev, unsigned int reg) static const struct snd_soc_codec_driver sta32x_codec = { .probe = sta32x_probe, .remove = sta32x_remove, - .suspend = sta32x_suspend, - .resume = sta32x_resume, .set_bias_level = sta32x_set_bias_level, + .suspend_bias_off = true, .controls = sta32x_snd_controls, .num_controls = ARRAY_SIZE(sta32x_snd_controls), .dapm_widgets = sta32x_dapm_widgets,
Set the CODEC driver's suspend_bias_off flag rather than manually going to SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes the code a bit shorter and cleaner.
Since the ASoC core now takes care of setting the bias level to SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually anymore either.
Signed-off-by: Lars-Peter Clausen lars@metafoo.de --- sound/soc/codecs/sta350.c | 21 +-------------------- 1 file changed, 1 insertion(+), 20 deletions(-)
diff --git a/sound/soc/codecs/sta350.c b/sound/soc/codecs/sta350.c index cc97dd5..bda2ee1 100644 --- a/sound/soc/codecs/sta350.c +++ b/sound/soc/codecs/sta350.c @@ -912,23 +912,6 @@ static struct snd_soc_dai_driver sta350_dai = { .ops = &sta350_dai_ops, };
-#ifdef CONFIG_PM -static int sta350_suspend(struct snd_soc_codec *codec) -{ - sta350_set_bias_level(codec, SND_SOC_BIAS_OFF); - return 0; -} - -static int sta350_resume(struct snd_soc_codec *codec) -{ - sta350_set_bias_level(codec, SND_SOC_BIAS_STANDBY); - return 0; -} -#else -#define sta350_suspend NULL -#define sta350_resume NULL -#endif - static int sta350_probe(struct snd_soc_codec *codec) { struct sta350_priv *sta350 = snd_soc_codec_get_drvdata(codec); @@ -1065,7 +1048,6 @@ static int sta350_remove(struct snd_soc_codec *codec) { struct sta350_priv *sta350 = snd_soc_codec_get_drvdata(codec);
- sta350_set_bias_level(codec, SND_SOC_BIAS_OFF); regulator_bulk_disable(ARRAY_SIZE(sta350->supplies), sta350->supplies);
return 0; @@ -1074,9 +1056,8 @@ static int sta350_remove(struct snd_soc_codec *codec) static const struct snd_soc_codec_driver sta350_codec = { .probe = sta350_probe, .remove = sta350_remove, - .suspend = sta350_suspend, - .resume = sta350_resume, .set_bias_level = sta350_set_bias_level, + .suspend_bias_off = true, .controls = sta350_snd_controls, .num_controls = ARRAY_SIZE(sta350_snd_controls), .dapm_widgets = sta350_dapm_widgets,
Set the CODEC driver's suspend_bias_off flag rather than manually going to SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes the code a bit shorter and cleaner.
Since the ASoC core now takes care of setting the bias level to SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually anymore either.
The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe() can also be removed as the core will automatically do this after the CODEC has been probed.
Signed-off-by: Lars-Peter Clausen lars@metafoo.de --- sound/soc/codecs/sta529.c | 35 ++--------------------------------- 1 file changed, 2 insertions(+), 33 deletions(-)
diff --git a/sound/soc/codecs/sta529.c b/sound/soc/codecs/sta529.c index 89c748d..b0f436d 100644 --- a/sound/soc/codecs/sta529.c +++ b/sound/soc/codecs/sta529.c @@ -319,41 +319,10 @@ static struct snd_soc_dai_driver sta529_dai = { .ops = &sta529_dai_ops, };
-static int sta529_probe(struct snd_soc_codec *codec) -{ - sta529_set_bias_level(codec, SND_SOC_BIAS_STANDBY); - - return 0; -} - -/* power down chip */ -static int sta529_remove(struct snd_soc_codec *codec) -{ - sta529_set_bias_level(codec, SND_SOC_BIAS_OFF); - - return 0; -} - -static int sta529_suspend(struct snd_soc_codec *codec) -{ - sta529_set_bias_level(codec, SND_SOC_BIAS_OFF); - - return 0; -} - -static int sta529_resume(struct snd_soc_codec *codec) -{ - sta529_set_bias_level(codec, SND_SOC_BIAS_STANDBY); - - return 0; -} - static const struct snd_soc_codec_driver sta529_codec_driver = { - .probe = sta529_probe, - .remove = sta529_remove, .set_bias_level = sta529_set_bias_level, - .suspend = sta529_suspend, - .resume = sta529_resume, + .suspend_bias_off = true, + .controls = sta529_snd_controls, .num_controls = ARRAY_SIZE(sta529_snd_controls), };
Set the CODEC driver's suspend_bias_off flag rather than manually going to SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes the code a bit shorter and cleaner.
The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe() can also be removed as the core will automatically do this after the CODEC has been probed.
Signed-off-by: Lars-Peter Clausen lars@metafoo.de --- sound/soc/codecs/stac9766.c | 11 +---------- 1 file changed, 1 insertion(+), 10 deletions(-)
diff --git a/sound/soc/codecs/stac9766.c b/sound/soc/codecs/stac9766.c index 53b810d..9878534 100644 --- a/sound/soc/codecs/stac9766.c +++ b/sound/soc/codecs/stac9766.c @@ -254,12 +254,6 @@ static int stac9766_reset(struct snd_soc_codec *codec, int try_warm) return 0; }
-static int stac9766_codec_suspend(struct snd_soc_codec *codec) -{ - stac9766_set_bias_level(codec, SND_SOC_BIAS_OFF); - return 0; -} - static int stac9766_codec_resume(struct snd_soc_codec *codec) { u16 id, reset; @@ -278,7 +272,6 @@ reset: reset++; goto reset; } - stac9766_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
return 0; } @@ -349,8 +342,6 @@ static int stac9766_codec_probe(struct snd_soc_codec *codec) goto codec_err; }
- stac9766_set_bias_level(codec, SND_SOC_BIAS_STANDBY); - snd_soc_add_codec_controls(codec, stac9766_snd_ac97_controls, ARRAY_SIZE(stac9766_snd_ac97_controls));
@@ -371,9 +362,9 @@ static struct snd_soc_codec_driver soc_codec_dev_stac9766 = { .write = stac9766_ac97_write, .read = stac9766_ac97_read, .set_bias_level = stac9766_set_bias_level, + .suspend_bias_off = true, .probe = stac9766_codec_probe, .remove = stac9766_codec_remove, - .suspend = stac9766_codec_suspend, .resume = stac9766_codec_resume, .reg_cache_size = ARRAY_SIZE(stac9766_reg), .reg_word_size = sizeof(u16),
On Mon, Oct 20, 2014 at 10:56:28AM +0200, Lars-Peter Clausen wrote:
Set the CODEC driver's suspend_bias_off flag rather than manually going to SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes the code a bit shorter and cleaner.
Applied all, thanks.
participants (2)
-
Lars-Peter Clausen -
Mark Brown