Re: [PATCH v8] ASoc: dt-bindings: tas27xx: revise tas27xx format
On Fri, Jul 22, 2022 at 06:55:12PM +0800, Raphael-Xu wrote:
revise the format
Complete sentences. And this is not v8. Each new change is v1.
Signed-off-by: Raphael-Xu <13691752556@139.com> --- .../devicetree/bindings/sound/tas27xx.yaml | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/sound/tas27xx.yaml b/Documentation/devicetree/bindings/sound/tas27xx.yaml index 66a0df8850ea..573652577462 100644 --- a/Documentation/devicetree/bindings/sound/tas27xx.yaml +++ b/Documentation/devicetree/bindings/sound/tas27xx.yaml @@ -8,7 +8,7 @@ $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Texas Instruments TAS2764/TAS2780 Smart PA
maintainers: - - Shenghao Ding <shenghao-ding@ti.com> + - Raphael Xu <raphael-xu@ti.com>
description: | The TAS2764/TAS2780 is a mono, digital input Class-D audio amplifier @@ -23,17 +23,19 @@ properties: - ti,tas2780
reg: - maxItems: 1 description: | - I2C address of the device can be between 0x38 to 0x45.
0x40-0x45 is no longer valid?
+ I2C address of the device can be between 0x38 to 0x3f. + minimum: 0x38 + maximum: 0x3f
reset-gpios: - maxItems: 1 description: GPIO used to reset the device. + maxItems: 1
Unnecessary change.
shutdown-gpios: + description: |
Don't need '|' if no formatting.
+ GPIO used to control the state of the device.Only for TAS2764.
Space needed after period.
maxItems: 1 - description: GPIO used to control the state of the device.
interrupts: maxItems: 1 @@ -41,10 +43,14 @@ properties: ti,imon-slot-no: $ref: /schemas/types.yaml#/definitions/uint32 description: TDM TX current sense time slot. + minimum: 0 + maximum: 3
ti,vmon-slot-no: $ref: /schemas/types.yaml#/definitions/uint32 description: TDM TX voltage sense time slot. + minimum: 0 + maximum: 3
'#sound-dai-cells': const: 1 -- 2.35.1
participants (1)
-
Rob Herring