[PATCH v2] ASoC: qcom: Fix for DMA interrupt clear reg overwriting
The DMA interrupt clear register overwritten during simultaneous playback and capture in lpass platform interrupt handler. It's causing playback or capture stuck in similtaneous plaback on speaker and capture on dmic test. Update appropriate reg fields of corresponding channel instead of entire register write.
Fixes: commit c5c8635a04711 ("ASoC: qcom: Add LPASS platform driver")
Signed-off-by: Srinivasa Rao Mandadapu srivasam@codeaurora.org --- sound/soc/qcom/lpass-platform.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-)
diff --git a/sound/soc/qcom/lpass-platform.c b/sound/soc/qcom/lpass-platform.c index 0df9481ea4c6..f220a2739ac3 100644 --- a/sound/soc/qcom/lpass-platform.c +++ b/sound/soc/qcom/lpass-platform.c @@ -526,7 +526,7 @@ static int lpass_platform_pcmops_trigger(struct snd_soc_component *component, return -EINVAL; }
- ret = regmap_write(map, reg_irqclr, val_irqclr); + ret = regmap_update_bits(map, reg_irqclr, val_irqclr, val_irqclr); if (ret) { dev_err(soc_runtime->dev, "error writing to irqclear reg: %d\n", ret); return ret; @@ -650,7 +650,7 @@ static irqreturn_t lpass_dma_interrupt_handler( struct lpass_variant *v = drvdata->variant; irqreturn_t ret = IRQ_NONE; int rv; - unsigned int reg = 0, val = 0; + unsigned int reg, val, val_clr, val_mask; struct regmap *map; unsigned int dai_id = cpu_dai->driver->id;
@@ -676,8 +676,9 @@ static irqreturn_t lpass_dma_interrupt_handler( return -EINVAL; } if (interrupts & LPAIF_IRQ_PER(chan)) { - - rv = regmap_write(map, reg, LPAIF_IRQ_PER(chan) | val); + val_clr = LPAIF_IRQ_PER(chan) | val; + val_mask = LPAIF_IRQ_ALL(chan); + rv = regmap_update_bits(map, reg, val_mask, val_clr); if (rv) { dev_err(soc_runtime->dev, "error writing to irqclear reg: %d\n", rv); @@ -688,7 +689,9 @@ static irqreturn_t lpass_dma_interrupt_handler( }
if (interrupts & LPAIF_IRQ_XRUN(chan)) { - rv = regmap_write(map, reg, LPAIF_IRQ_XRUN(chan) | val); + val_clr = (LPAIF_IRQ_XRUN(chan) | val); + val_mask = LPAIF_IRQ_ALL(chan); + rv = regmap_update_bits(map, reg, val_mask, val_clr); if (rv) { dev_err(soc_runtime->dev, "error writing to irqclear reg: %d\n", rv); @@ -700,7 +703,9 @@ static irqreturn_t lpass_dma_interrupt_handler( }
if (interrupts & LPAIF_IRQ_ERR(chan)) { - rv = regmap_write(map, reg, LPAIF_IRQ_ERR(chan) | val); + val_clr = (LPAIF_IRQ_ERR(chan) | val); + val_mask = LPAIF_IRQ_ALL(chan); + rv = regmap_update_bits(map, reg, val_mask, val_clr); if (rv) { dev_err(soc_runtime->dev, "error writing to irqclear reg: %d\n", rv);
On 05/06/2021 12:38, Srinivasa Rao Mandadapu wrote:
The DMA interrupt clear register overwritten during simultaneous playback and capture in lpass platform interrupt handler. It's causing playback or capture stuck in similtaneous plaback on speaker and capture on dmic test. Update appropriate reg fields of corresponding channel instead of entire register write.
Fixes: commit c5c8635a04711 ("ASoC: qcom: Add LPASS platform driver")
Signed-off-by: Srinivasa Rao Mandadapu srivasam@codeaurora.org
sound/soc/qcom/lpass-platform.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-)
diff --git a/sound/soc/qcom/lpass-platform.c b/sound/soc/qcom/lpass-platform.c index 0df9481ea4c6..f220a2739ac3 100644 --- a/sound/soc/qcom/lpass-platform.c +++ b/sound/soc/qcom/lpass-platform.c @@ -526,7 +526,7 @@ static int lpass_platform_pcmops_trigger(struct snd_soc_component *component, return -EINVAL; }
ret = regmap_write(map, reg_irqclr, val_irqclr);
ret = regmap_update_bits(map, reg_irqclr, val_irqclr, val_irqclr);@@ -650,7 +650,7 @@ static irqreturn_t lpass_dma_interrupt_handler( struct lpass_variant *v = drvdata->variant; irqreturn_t ret = IRQ_NONE; int rv;
- unsigned int reg = 0, val = 0;
- unsigned int reg, val, val_clr, val_mask;
minor nit here, variable name val_clr is pretty confusing to readers, It might be okay for irq clr register but we are using the same name of writing to other registers. So can I suggest you to reuse val variable.
other thing is val_mask, please rename this to mask and just set it in the start of function so you can avoid 3 extra lines below.
Other than that patch looks good to me!
--srini
struct regmap *map; unsigned int dai_id = cpu_dai->driver->id;
@@ -676,8 +676,9 @@ static irqreturn_t lpass_dma_interrupt_handler( return -EINVAL; } if (interrupts & LPAIF_IRQ_PER(chan)) {
rv = regmap_write(map, reg, LPAIF_IRQ_PER(chan) | val);
val_clr = LPAIF_IRQ_PER(chan) | val;val_mask = LPAIF_IRQ_ALL(chan);rv = regmap_update_bits(map, reg, val_mask, val_clr);@@ -688,7 +689,9 @@ static irqreturn_t lpass_dma_interrupt_handler( }
if (interrupts & LPAIF_IRQ_XRUN(chan)) {
rv = regmap_write(map, reg, LPAIF_IRQ_XRUN(chan) | val);
val_clr = (LPAIF_IRQ_XRUN(chan) | val);val_mask = LPAIF_IRQ_ALL(chan);rv = regmap_update_bits(map, reg, val_mask, val_clr);@@ -700,7 +703,9 @@ static irqreturn_t lpass_dma_interrupt_handler( }
if (interrupts & LPAIF_IRQ_ERR(chan)) {
rv = regmap_write(map, reg, LPAIF_IRQ_ERR(chan) | val);
val_clr = (LPAIF_IRQ_ERR(chan) | val);val_mask = LPAIF_IRQ_ALL(chan);rv = regmap_update_bits(map, reg, val_mask, val_clr);
Hi Srini,
Thanks for your review comments!!!
On 6/7/2021 8:20 PM, Srinivas Kandagatla wrote:
On 05/06/2021 12:38, Srinivasa Rao Mandadapu wrote:
The DMA interrupt clear register overwritten during simultaneous playback and capture in lpass platform interrupt handler. It's causing playback or capture stuck in similtaneous plaback on speaker and capture on dmic test. Update appropriate reg fields of corresponding channel instead of entire register write.
Fixes: commit c5c8635a04711 ("ASoC: qcom: Add LPASS platform driver")
Signed-off-by: Srinivasa Rao Mandadapu srivasam@codeaurora.org
sound/soc/qcom/lpass-platform.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-)
diff --git a/sound/soc/qcom/lpass-platform.c b/sound/soc/qcom/lpass-platform.c index 0df9481ea4c6..f220a2739ac3 100644 --- a/sound/soc/qcom/lpass-platform.c +++ b/sound/soc/qcom/lpass-platform.c @@ -526,7 +526,7 @@ static int lpass_platform_pcmops_trigger(struct snd_soc_component *component, return -EINVAL; } - ret = regmap_write(map, reg_irqclr, val_irqclr); + ret = regmap_update_bits(map, reg_irqclr, val_irqclr, val_irqclr); if (ret) { dev_err(soc_runtime->dev, "error writing to irqclear reg: %d\n", ret); return ret; @@ -650,7 +650,7 @@ static irqreturn_t lpass_dma_interrupt_handler( struct lpass_variant *v = drvdata->variant; irqreturn_t ret = IRQ_NONE; int rv; - unsigned int reg = 0, val = 0; + unsigned int reg, val, val_clr, val_mask;
minor nit here, variable name val_clr is pretty confusing to readers, It might be okay for irq clr register but we are using the same name of writing to other registers. So can I suggest you to reuse val variable.
other thing is val_mask, please rename this to mask and just set it in the start of function so you can avoid 3 extra lines below.
Ok will do accordingly and repost patch.
Other than that patch looks good to me!
--srini
struct regmap *map; unsigned int dai_id = cpu_dai->driver->id; @@ -676,8 +676,9 @@ static irqreturn_t lpass_dma_interrupt_handler( return -EINVAL; } if (interrupts & LPAIF_IRQ_PER(chan)) {
- rv = regmap_write(map, reg, LPAIF_IRQ_PER(chan) | val); + val_clr = LPAIF_IRQ_PER(chan) | val; + val_mask = LPAIF_IRQ_ALL(chan); + rv = regmap_update_bits(map, reg, val_mask, val_clr); if (rv) { dev_err(soc_runtime->dev, "error writing to irqclear reg: %d\n", rv); @@ -688,7 +689,9 @@ static irqreturn_t lpass_dma_interrupt_handler( } if (interrupts & LPAIF_IRQ_XRUN(chan)) { - rv = regmap_write(map, reg, LPAIF_IRQ_XRUN(chan) | val); + val_clr = (LPAIF_IRQ_XRUN(chan) | val); + val_mask = LPAIF_IRQ_ALL(chan); + rv = regmap_update_bits(map, reg, val_mask, val_clr); if (rv) { dev_err(soc_runtime->dev, "error writing to irqclear reg: %d\n", rv); @@ -700,7 +703,9 @@ static irqreturn_t lpass_dma_interrupt_handler( } if (interrupts & LPAIF_IRQ_ERR(chan)) { - rv = regmap_write(map, reg, LPAIF_IRQ_ERR(chan) | val); + val_clr = (LPAIF_IRQ_ERR(chan) | val); + val_mask = LPAIF_IRQ_ALL(chan); + rv = regmap_update_bits(map, reg, val_mask, val_clr); if (rv) { dev_err(soc_runtime->dev, "error writing to irqclear reg: %d\n", rv);
participants (2)
-
Srinivas Kandagatla -
Srinivasa Rao Mandadapu