[alsa-devel] [PATCH] ARM: S5PV210: Add audio support to Goni and Aquila board
This patch the I2C board information for the WM8994 used in the Goni/Aquila as audio codec and adds the I2C/I2S platform drivers. Additionlly, to control power consumption have registerd the voltage consumer of WM8994 to the regulator framework. I initialize gpio settting relevant to operation of audio codec. I explain following comment concering gpio setting: - CODEC_XTAL_EN : This gpio enables that the main clock is provided to operate audio codec. (Only used on Aquila board) - ADC_EN : This gpio enable the ADC device which is used to detect the kind of jack. (SND_JACK_HEADPHONE/HEADSET/MECHANICAL/AVOUT) According to the kind of jack, an electric current is changed. (Only used on Aquila board) - MICBIAS_EN : This gpio enable the microphone to support capture.
Signed-off-by : Chanwoo Choi cw00.choi@samsung.com Signed-off-by : Joonyoung Shim jy0922.shim@samsung.com Signed-off-by : Kyungmin Park kyungmin.park@samsung.com --- arch/arm/mach-s5pv210/mach-aquila.c | 177 +++++++++++++++++++++++++++++++++++ arch/arm/mach-s5pv210/mach-goni.c | 165 ++++++++++++++++++++++++++++++++ 2 files changed, 342 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c index f0f960f..312ff76 100644 --- a/arch/arm/mach-s5pv210/mach-aquila.c +++ b/arch/arm/mach-s5pv210/mach-aquila.c @@ -17,9 +17,11 @@ #include <linux/i2c-gpio.h> #include <linux/i2c/mcs.h> #include <linux/mfd/max8998.h> +#include <linux/mfd/wm8994/pdata.h> #include <linux/gpio_keys.h> #include <linux/input.h> #include <linux/gpio.h> +#include <linux/regulator/fixed.h>
#include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -397,6 +399,120 @@ static struct max8998_platform_data aquila_max8998_pdata = { }; #endif
+static struct regulator_consumer_supply wm8994_fixed_voltage0_supplies[] = { + { + .dev_name = "5-001a", + .supply = "DBVDD", + }, { + .dev_name = "5-001a", + .supply = "AVDD2", + }, { + .dev_name = "5-001a", + .supply = "CPVDD", + }, + +}; + +static struct regulator_consumer_supply wm8994_fixed_voltage1_supplies[] = { + { + .dev_name = "5-001a", + .supply = "SPKVDD1", + }, { + .dev_name = "5-001a", + .supply = "SPKVDD2", + }, +}; + +static struct regulator_init_data wm8994_fixed_voltage0_init_data = { + .constraints = { + .always_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(wm8994_fixed_voltage0_supplies), + .consumer_supplies = wm8994_fixed_voltage0_supplies, +}; + +static struct regulator_init_data wm8994_fixed_voltage1_init_data = { + .constraints = { + .always_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(wm8994_fixed_voltage1_supplies), + .consumer_supplies = wm8994_fixed_voltage1_supplies, +}; + +static struct fixed_voltage_config wm8994_fixed_voltage0_config = { + .supply_name = "VCC_1.8V_PDA", + .microvolts = 1800000, + .gpio = -EINVAL, + .init_data = &wm8994_fixed_voltage0_init_data, +}; + +static struct fixed_voltage_config wm8994_fixed_voltage1_config = { + .supply_name = "V_BAT", + .microvolts = 3700000, + .gpio = -EINVAL, + .init_data = &wm8994_fixed_voltage1_init_data, +}; + +static struct platform_device wm8994_fixed_voltage0 = { + .name = "reg-fixed-voltage", + .id = 0, + .dev = { + .platform_data = &wm8994_fixed_voltage0_config, + }, +}; + +static struct platform_device wm8994_fixed_voltage1 = { + .name = "reg-fixed-voltage", + .id = 1, + .dev = { + .platform_data = &wm8994_fixed_voltage1_config, + }, +}; + +static struct regulator_consumer_supply wm8994_avdd1_supply = { + .dev_name = "5-001a", + .supply = "AVDD1", +}; + +static struct regulator_consumer_supply wm8994_dcvdd_supply = { + .dev_name = "5-001a", + .supply = "DCVDD", +}; + +static struct regulator_init_data wm8994_ldo1_data = { + .constraints = { + .name = "AVDD1_3.0V", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &wm8994_avdd1_supply, +}; + +static struct regulator_init_data wm8994_ldo2_data = { + .constraints = { + .name = "DCVDD_1.0V", + }, + .num_consumer_supplies = 1, + .consumer_supplies = &wm8994_dcvdd_supply, +}; + +static struct wm8994_pdata wm8994_platform_data = { + /* configure gpio1 function: 0x0001(Logic level input/output) */ + .gpio_defaults[0] = 0x0001, + /* configure gpio3/4/5/7 function for AIF2 voice */ + .gpio_defaults[2] = 0x8100, + .gpio_defaults[3] = 0x8100, + .gpio_defaults[4] = 0x8100, + .gpio_defaults[6] = 0x0100, + /* configure gpio8/9/10/11 function for AIF3 BT */ + .gpio_defaults[7] = 0x8100, + .gpio_defaults[8] = 0x0100, + .gpio_defaults[9] = 0x0100, + .gpio_defaults[10] = 0x0100, + .ldo[0] = { S5PV210_MP03(6), NULL, &wm8994_ldo1_data }, /* XM0FRNB_2 */ + .ldo[1] = { 0, NULL, &wm8994_ldo2_data }, +}; + /* GPIO I2C PMIC */ #define AP_I2C_GPIO_PMIC_BUS_4 4 static struct i2c_gpio_platform_data aquila_i2c_gpio_pmic_data = { @@ -422,6 +538,58 @@ static struct i2c_board_info i2c_gpio_pmic_devs[] __initdata = { #endif };
+/* GPIO I2C AP 1.8V */ +#define AP_I2C_GPIO_BUS_5 5 +static struct i2c_gpio_platform_data i2c_gpio5_data = { + .sda_pin = S5PV210_MP05(3), /* XM0ADDR_11 */ + .scl_pin = S5PV210_MP05(2), /* XM0ADDR_10 */ +}; + +static struct platform_device i2c_gpio5 = { + .name = "i2c-gpio", + .id = AP_I2C_GPIO_BUS_5, + .dev = { + .platform_data = &i2c_gpio5_data, + }, +}; + +static struct i2c_board_info i2c_gpio5_devs[] __initdata = { + { + /* CS/ADDR = low 0x34 (FYI: high = 0x36) */ + I2C_BOARD_INFO("wm8994", 0x34 >> 1), + .platform_data = &wm8994_platform_data, + }, +}; + +static void __init aquila_sound_init(void) +{ + unsigned int gpio; + + /* CODEC_XTAL_EN */ + gpio = S5PV210_GPH3(2); /* XEINT_26 */ + gpio_request(gpio, "CODEC_XTAL_EN"); + s3c_gpio_cfgpin(gpio, S3C_GPIO_OUTPUT); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + gpio_direction_output(gpio, 1); + + /* CLKOUT[9:8] set to 0x3(XUSBXTI) of 0xE010E000(OTHERS) + * for 24MHZ + */ + writel(readl(S5P_OTHERS) | (0x3 << 8), S5P_OTHERS); + + /* MICBIAS_EN */ + gpio = S5PV210_GPJ4(2); /* XMSMRN */ + gpio_request(gpio, "MICBIAS_EN"); + s3c_gpio_cfgpin(gpio, S3C_GPIO_OUTPUT); + gpio_direction_output(gpio, 1); + + /* ADC_EN */ + gpio = S5PV210_GPJ3(2); + gpio_request(gpio, "ADC_EN"); + s3c_gpio_cfgpin(gpio, S3C_GPIO_OUTPUT); + gpio_direction_output(gpio, 1); +} + /* PMIC Power button */ static struct gpio_keys_button aquila_gpio_keys_table[] = { { @@ -523,6 +691,10 @@ static struct platform_device *aquila_devices[] __initdata = { &s5pc110_device_onenand, &samsung_device_keypad, &i2c_gpio10, + &i2c_gpio5, + &wm8994_fixed_voltage0, + &wm8994_fixed_voltage1, + &s5pv210_device_iis0, };
static void __init aquila_map_io(void) @@ -539,6 +711,11 @@ static void __init aquila_machine_init(void) i2c_register_board_info(AP_I2C_GPIO_PMIC_BUS_4, i2c_gpio_pmic_devs, ARRAY_SIZE(i2c_gpio_pmic_devs));
+ /* SOUND */ + aquila_sound_init(); + i2c_register_board_info(AP_I2C_GPIO_BUS_5, i2c_gpio5_devs, + ARRAY_SIZE(i2c_gpio5_devs)); + /* FB */ s3c_fb_set_platdata(&aquila_lcd_pdata);
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index 5fec4a0..944e600 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -17,9 +17,11 @@ #include <linux/i2c-gpio.h> #include <linux/i2c/mcs.h> #include <linux/mfd/max8998.h> +#include <linux/mfd/wm8994/pdata.h> #include <linux/gpio_keys.h> #include <linux/input.h> #include <linux/gpio.h> +#include <linux/regulator/fixed.h>
#include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -373,6 +375,120 @@ static struct max8998_regulator_data goni_regulators[] = { { MAX8998_BUCK4, &goni_buck4_data }, };
+static struct regulator_consumer_supply wm8994_fixed_voltage0_supplies[] = { + { + .dev_name = "5-001a", + .supply = "DBVDD", + }, { + .dev_name = "5-001a", + .supply = "AVDD2", + }, { + .dev_name = "5-001a", + .supply = "CPVDD", + }, + +}; + +static struct regulator_consumer_supply wm8994_fixed_voltage1_supplies[] = { + { + .dev_name = "5-001a", + .supply = "SPKVDD1", + }, { + .dev_name = "5-001a", + .supply = "SPKVDD2", + }, +}; + +static struct regulator_init_data wm8994_fixed_voltage0_init_data = { + .constraints = { + .always_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(wm8994_fixed_voltage0_supplies), + .consumer_supplies = wm8994_fixed_voltage0_supplies, +}; + +static struct regulator_init_data wm8994_fixed_voltage1_init_data = { + .constraints = { + .always_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(wm8994_fixed_voltage1_supplies), + .consumer_supplies = wm8994_fixed_voltage1_supplies, +}; + +static struct fixed_voltage_config wm8994_fixed_voltage0_config = { + .supply_name = "VCC_1.8V_PDA", + .microvolts = 1800000, + .gpio = -EINVAL, + .init_data = &wm8994_fixed_voltage0_init_data, +}; + +static struct fixed_voltage_config wm8994_fixed_voltage1_config = { + .supply_name = "V_BAT", + .microvolts = 3700000, + .gpio = -EINVAL, + .init_data = &wm8994_fixed_voltage1_init_data, +}; + +static struct platform_device wm8994_fixed_voltage0 = { + .name = "reg-fixed-voltage", + .id = 0, + .dev = { + .platform_data = &wm8994_fixed_voltage0_config, + }, +}; + +static struct platform_device wm8994_fixed_voltage1 = { + .name = "reg-fixed-voltage", + .id = 1, + .dev = { + .platform_data = &wm8994_fixed_voltage1_config, + }, +}; + +static struct regulator_consumer_supply wm8994_avdd1_supply = { + .dev_name = "5-001a", + .supply = "AVDD1", +}; + +static struct regulator_consumer_supply wm8994_dcvdd_supply = { + .dev_name = "5-001a", + .supply = "DCVDD", +}; + +static struct regulator_init_data wm8994_ldo1_data = { + .constraints = { + .name = "AVDD1_3.0V", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &wm8994_avdd1_supply, +}; + +static struct regulator_init_data wm8994_ldo2_data = { + .constraints = { + .name = "DCVDD_1.0V", + }, + .num_consumer_supplies = 1, + .consumer_supplies = &wm8994_dcvdd_supply, +}; + +static struct wm8994_pdata wm8994_platform_data = { + /* configure gpio1 function: 0x0001(Logic level input/output) */ + .gpio_defaults[0] = 0x0001, + /* configure gpio3/4/5/7 function for AIF2 voice */ + .gpio_defaults[2] = 0x8100, + .gpio_defaults[3] = 0x8100, + .gpio_defaults[4] = 0x8100, + .gpio_defaults[6] = 0x0100, + /* configure gpio8/9/10/11 function for AIF3 BT */ + .gpio_defaults[7] = 0x8100, + .gpio_defaults[8] = 0x0100, + .gpio_defaults[9] = 0x0100, + .gpio_defaults[10] = 0x0100, + .ldo[0] = { S5PV210_GPF3(4), NULL, &wm8994_ldo1_data }, /* XVVSYNC_LDI */ + .ldo[1] = { 0, NULL, &wm8994_ldo2_data }, +}; + static struct max8998_platform_data goni_max8998_pdata = { .num_regulators = ARRAY_SIZE(goni_regulators), .regulators = goni_regulators, @@ -404,6 +520,45 @@ static struct i2c_board_info i2c_gpio_pmic_devs[] __initdata = { #endif };
+/* GPIO I2C AP 1.8V */ +#define AP_I2C_GPIO_BUS_5 5 +static struct i2c_gpio_platform_data i2c_gpio5_data = { + .sda_pin = S5PV210_MP05(3), /* XM0ADDR_11 */ + .scl_pin = S5PV210_MP05(2), /* XM0ADDR_10 */ +}; + +static struct platform_device i2c_gpio5 = { + .name = "i2c-gpio", + .id = AP_I2C_GPIO_BUS_5, + .dev = { + .platform_data = &i2c_gpio5_data, + }, +}; + +static struct i2c_board_info i2c_gpio5_devs[] __initdata = { + { + /* CS/ADDR = low 0x34 (FYI: high = 0x36) */ + I2C_BOARD_INFO("wm8994", 0x34 >> 1), + .platform_data = &wm8994_platform_data, + }, +}; + +static void __init goni_sound_init(void) +{ + unsigned int gpio; + + /* CLKOUT[9:8] set to 0x3(XUSBXTI) of 0xE010E000(OTHERS) + * for 24MHZ + */ + writel(readl(S5P_OTHERS) | (0x3 << 8), S5P_OTHERS); + + /* MICBIAS_EN */ + gpio = S5PV210_GPJ4(2); /* XMSMRN */ + gpio_request(gpio, "MICBIAS_EN"); + s3c_gpio_cfgpin(gpio, S3C_GPIO_OUTPUT); + gpio_direction_output(gpio, 1); +} + /* PMIC Power button */ static struct gpio_keys_button goni_gpio_keys_table[] = { { @@ -504,7 +659,11 @@ static struct platform_device *goni_devices[] __initdata = { &samsung_device_keypad, &goni_i2c_gpio_pmic, &goni_device_gpiokeys, + &i2c_gpio5, &i2c_gpio10, + &wm8994_fixed_voltage0, + &wm8994_fixed_voltage1, + &s5pv210_device_iis0, };
static void __init goni_map_io(void) @@ -520,6 +679,12 @@ static void __init goni_machine_init(void) goni_pmic_init(); i2c_register_board_info(AP_I2C_GPIO_PMIC_BUS_4, i2c_gpio_pmic_devs, ARRAY_SIZE(i2c_gpio_pmic_devs)); + + /* SOUND */ + goni_sound_init(); + i2c_register_board_info(AP_I2C_GPIO_BUS_5, i2c_gpio5_devs, + ARRAY_SIZE(i2c_gpio5_devs)); + /* FB */ s3c_fb_set_platdata(&goni_lcd_pdata);
participants (1)
-
Chanwoo Choi