[PATCH v2 0/4] ASoC: Intel: bytcht_es8316: Determine quirks/routing through ACPI DSM
Hi All,
This takes some of the work done to auto-configure quirks/routing for ESS83xx codecs by getting the info from ACPI from: https://github.com/thesofproject/linux/pull/4112
And then builds on top of this to add auto-configuration to the bytcht_es8316 board driver.
Changes in v2: - Move es83xx-dsm-common.c back to sound/soc/codecs like the original version from: https://github.com/thesofproject/linux/pull/4112/
Note compared to the pull-request, which deals with the ES8336, this series deals with the ES8316 (for which I have several devices to test on) and this moves handling of the _DSM from the codec driver to the board driver since with the ES8316 the board driver takes care of setting up various routes for things like the mic and speakers.
After this series audio now works properly on a CHT Chuwi Hi12 tablet without needing to add an extra quirk for that model.
This has also been tested on the following devices, where things are unchanged from before (the ACPI autoconfiguration gives the same results as the old defaults) :
Onda V80 plus (CHT) GP-electronic T701 (BYT)
I also tested this on a Nanote UMPC-01, here the _DSM result for PLATFORM_SPK_TYPE_ARG wrongly returns 1 (mono) while the device actually has 2 speakers, so this model needs to keep its DMI quirk.
I don't have an IRBIS NB41 nor a TECLAST X98 Plus II, so the DMI quirks for those are left in place too on a better safe then sorry basis.
Regards,
Hans
Hans de Goede (2): ASoC: Intel: bytcht_es8316: Add is_bytcr helper variable ASoC: Intel: bytcht_es8316: Determine quirks/routing with codec-dev ACPI DSM
Pierre-Louis Bossart (2): ASoC: es83xx: add ACPI DSM helper module ASoC: Intel: bytcht_es8316: Dump basic _DSM information
sound/soc/codecs/Kconfig | 4 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/es83xx-dsm-common.c | 89 ++++++ sound/soc/codecs/es83xx-dsm-common.h | 393 +++++++++++++++++++++++++ sound/soc/intel/boards/Kconfig | 1 + sound/soc/intel/boards/bytcht_es8316.c | 71 ++++- 6 files changed, 557 insertions(+), 3 deletions(-) create mode 100644 sound/soc/codecs/es83xx-dsm-common.c create mode 100644 sound/soc/codecs/es83xx-dsm-common.h
From: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com
Most of the ES83xx codec configuration is exposed in the DSDT table and accessible via a _DSM method. Start adding basic definitions and helpers to dump the information.
Reviewed-by: Mauro Carvalho Chehab mchehab@kernel.org Co-developed-by: David Yang yangxiaohua@everest-semi.com Signed-off-by: David Yang yangxiaohua@everest-semi.com Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Signed-off-by: Hans de Goede hdegoede@redhat.com --- Changes in v2: - Move es83xx-dsm-common.c back to sound/soc/codecs like the orignal version from: https://github.com/thesofproject/linux/pull/4112/ --- sound/soc/codecs/Kconfig | 4 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/es83xx-dsm-common.c | 89 ++++++ sound/soc/codecs/es83xx-dsm-common.h | 393 +++++++++++++++++++++++++++ 4 files changed, 488 insertions(+) create mode 100644 sound/soc/codecs/es83xx-dsm-common.c create mode 100644 sound/soc/codecs/es83xx-dsm-common.h
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 3429419ca694..59f9742e9ff4 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -1076,6 +1076,10 @@ config SND_SOC_ES7134 config SND_SOC_ES7241 tristate "Everest Semi ES7241 CODEC"
+config SND_SOC_ES83XX_DSM_COMMON + depends on ACPI + tristate + config SND_SOC_ES8316 tristate "Everest Semi ES8316 CODEC" depends on I2C diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 2078bb0d981e..f53baa2b9565 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -116,6 +116,7 @@ snd-soc-da9055-objs := da9055.o snd-soc-dmic-objs := dmic.o snd-soc-es7134-objs := es7134.o snd-soc-es7241-objs := es7241.o +snd-soc-es83xx-dsm-common-objs := es83xx-dsm-common.o snd-soc-es8316-objs := es8316.o snd-soc-es8326-objs := es8326.o snd-soc-es8328-objs := es8328.o @@ -505,6 +506,7 @@ obj-$(CONFIG_SND_SOC_DA9055) += snd-soc-da9055.o obj-$(CONFIG_SND_SOC_DMIC) += snd-soc-dmic.o obj-$(CONFIG_SND_SOC_ES7134) += snd-soc-es7134.o obj-$(CONFIG_SND_SOC_ES7241) += snd-soc-es7241.o +obj-$(CONFIG_SND_SOC_ES83XX_DSM_COMMON) += snd-soc-es83xx-dsm-common.o obj-$(CONFIG_SND_SOC_ES8316) += snd-soc-es8316.o obj-$(CONFIG_SND_SOC_ES8326) += snd-soc-es8326.o obj-$(CONFIG_SND_SOC_ES8328) += snd-soc-es8328.o diff --git a/sound/soc/codecs/es83xx-dsm-common.c b/sound/soc/codecs/es83xx-dsm-common.c new file mode 100644 index 000000000000..94fd7d54c53b --- /dev/null +++ b/sound/soc/codecs/es83xx-dsm-common.c @@ -0,0 +1,89 @@ +// SPDX-License-Identifier: GPL-2.0-only +// +// Copyright (c) Intel Corporation, 2022 +// Copyright Everest Semiconductor Co.,Ltd + +#include <linux/module.h> +#include <linux/acpi.h> +#include "es83xx-dsm-common.h" + +/* UUID ("a9800c04-e016-343e-41f4-6bcce70f4332") */ +static const guid_t es83xx_dsm_guid = + GUID_INIT(0xa9800c04, 0xe016, 0x343e, + 0x41, 0xf4, 0x6b, 0xcc, 0xe7, 0x0f, 0x43, 0x32); + +#define ES83xx_DSM_REVID 1 + +int es83xx_dsm(struct device *dev, int arg, int *value) +{ + acpi_handle dhandle; + union acpi_object *obj; + int ret = 0; + + dhandle = ACPI_HANDLE(dev); + if (!dhandle) + return -ENOENT; + + obj = acpi_evaluate_dsm(dhandle, &es83xx_dsm_guid, ES83xx_DSM_REVID, + arg, NULL); + if (!obj) { + dev_err(dev, "%s: acpi_evaluate_dsm() failed\n", __func__); + ret = -EINVAL; + goto out; + } + + if (obj->type != ACPI_TYPE_INTEGER) { + dev_err(dev, "%s: object is not ACPI_TYPE_INTEGER\n", __func__); + ret = -EINVAL; + goto err; + } + + *value = obj->integer.value; +err: + ACPI_FREE(obj); +out: + return ret; +} +EXPORT_SYMBOL_GPL(es83xx_dsm); + +int es83xx_dsm_dump(struct device *dev) +{ + int value; + int ret; + + ret = es83xx_dsm(dev, PLATFORM_MAINMIC_TYPE_ARG, &value); + if (ret < 0) + return ret; + dev_info(dev, "PLATFORM_MAINMIC_TYPE %#x\n", value); + + ret = es83xx_dsm(dev, PLATFORM_HPMIC_TYPE_ARG, &value); + if (ret < 0) + return ret; + dev_info(dev, "PLATFORM_HPMIC_TYPE %#x\n", value); + + ret = es83xx_dsm(dev, PLATFORM_SPK_TYPE_ARG, &value); + if (ret < 0) + return ret; + dev_info(dev, "PLATFORM_SPK_TYPE %#x\n", value); + + ret = es83xx_dsm(dev, PLATFORM_HPDET_INV_ARG, &value); + if (ret < 0) + return ret; + dev_info(dev, "PLATFORM_HPDET_INV %#x\n", value); + + ret = es83xx_dsm(dev, PLATFORM_PCM_TYPE_ARG, &value); + if (ret < 0) + return ret; + dev_info(dev, "PLATFORM_PCM_TYPE %#x\n", value); + + ret = es83xx_dsm(dev, PLATFORM_MIC_DE_POP_ARG, &value); + if (ret < 0) + return ret; + dev_info(dev, "PLATFORM_MIC_DE_POP %#x\n", value); + + return 0; +} +EXPORT_SYMBOL_GPL(es83xx_dsm_dump); + +MODULE_DESCRIPTION("Everest Semi ES83xx DSM helpers"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/es83xx-dsm-common.h b/sound/soc/codecs/es83xx-dsm-common.h new file mode 100644 index 000000000000..91c9a89e75e9 --- /dev/null +++ b/sound/soc/codecs/es83xx-dsm-common.h @@ -0,0 +1,393 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) Intel Corporation, 2022 + * Copyright Everest Semiconductor Co.,Ltd + */ + +/* Definitions extracted from ASL file provided at + * https://github.com/thesofproject/linux/files/9398723/ESSX8326.zip + */ + +#ifndef _ES83XX_DSM_COMMON_H +#define _ES83XX_DSM_COMMON_H + +/*************************************************** + * DSM arguments * + ***************************************************/ + +#define PLATFORM_MAINMIC_TYPE_ARG 0x00 +#define PLATFORM_HPMIC_TYPE_ARG 0x01 +#define PLATFORM_SPK_TYPE_ARG 0x02 +#define PLATFORM_HPDET_INV_ARG 0x03 +#define PLATFORM_PCM_TYPE_ARG 0x04 + +#define PLATFORM_MIC_DE_POP_ARG 0x06 +#define PLATFORM_CODEC_TYPE_ARG 0x0E +#define PLATFORM_BUS_SLOT_ARG 0x0F + +#define HP_CODEC_LINEIN_PGA_GAIN_ARG 0x10 +#define MAIN_CODEC_LINEIN_PGA_GAIN_ARG 0x20 + +#define HP_CODEC_D2SEPGA_GAIN_ARG 0x11 +#define MAIN_CODEC_D2SEPGA_GAIN_ARG 0x21 + +#define HP_CODEC_ADC_VOLUME_ARG 0x12 +#define MAIN_CODEC_ADC_VOLUME_ARG 0x22 + +#define HP_CODEC_ADC_ALC_ENABLE_ARG 0x13 +#define MAIN_CODEC_ADC_ALC_ENABLE_ARG 0x23 + +#define HP_CODEC_ADC_ALC_TARGET_LEVEL_ARG 0x14 +#define MAIN_CODEC_ADC_ALC_TARGET_LEVEL_ARG 0x24 + +#define HP_CODEC_ADC_ALC_MAXGAIN_ARG 0x15 +#define MAIN_CODEC_ADC_ALC_MAXGAIN_ARG 0x25 + +#define HP_CODEC_ADC_ALC_MINGAIN_ARG 0x16 +#define MAIN_CODEC_ADC_ALC_MINGAIN_ARG 0x26 + +#define HP_CODEC_ADC_ALC_HLDTIME_ARG 0x17 +#define MAIN_CODEC_ADC_ALC_HLDTIME_ARG 0x27 + +#define HP_CODEC_ADC_ALC_DCYTIME_ARG 0x18 +#define MAIN_CODEC_ADC_ALC_DCYTIME_ARG 0x28 + +#define HP_CODEC_ADC_ALC_ATKTIME_ARG 0x19 +#define MAIN_CODEC_ADC_ALC_ATKTIME_ARG 0x29 + +#define HP_CODEC_ADC_ALC_NGTYPE_ARG 0x1a +#define MAIN_CODEC_ADC_ALC_NGTYPE_ARG 0x2a + +#define HP_CODEC_ADC_ALC_NGTHLD_ARG 0x1b +#define MAIN_CODEC_ADC_ALC_NGTHLD_ARG 0x2b + +#define MAIN_CODEC_ADC_GUI_STEP_ARG 0x2c +#define MAIN_CODEC_ADC_GUI_GAIN_RANGE_ARG 0x2c + +#define HEADPHONE_DUMMY_REMOVE_ENABLE_ARG 0x2e + +#define HP_CODEC_DAC_HPMIX_HIGAIN_ARG 0x40 +#define SPK_CODEC_DAC_HPMIX_HIGAIN_ARG 0x50 + +#define HP_CODEC_DAC_HPMIX_VOLUME_ARG 0x41 +#define SPK_CODEC_DAC_HPMIX_VOLUME_ARG 0x51 + +#define HP_CODEC_DAC_HPOUT_VOLUME_ARG 0x42 +#define SPK_CODEC_DAC_HPOUT_VOLUME_ARG 0x52 + +#define HP_CODEC_LDAC_VOLUME_ARG 0x44 +#define HP_CODEC_RDAC_VOLUME_ARG 0x54 + +#define SPK_CODEC_LDAC_VOLUME_ARG 0x45 +#define SPK_CODEC_RDAC_VOLUME_ARG 0x55 + +#define HP_CODEC_DAC_AUTOMUTE_ARG 0x46 +#define SPK_CODEC_DAC_AUTOMUTE_ARG 0x56 + +#define HP_CODEC_DAC_MONO_ARG 0x4A +#define SPK_CODEC_DAC_MONO_ARG 0x5A + +#define HP_CTL_IO_LEVEL_ARG 0x4B +#define SPK_CTL_IO_LEVEL_ARG 0x5B + +#define CODEC_GPIO0_FUNC_ARG 0x80 +#define CODEC_GPIO1_FUNC_ARG 0x81 +#define CODEC_GPIO2_FUNC_ARG 0x82 +#define CODEC_GPIO3_FUNC_ARG 0x83 +#define CODEC_GPIO4_FUNC_ARG 0x84 + +#define PLATFORM_MCLK_LRCK_FREQ_ARG 0x85 + +/*************************************************** + * Values for arguments * + ***************************************************/ + +/* Main and HP Mic */ +#define PLATFORM_MIC_DMIC_HIGH_LEVEL 0xAA +#define PLATFORM_MIC_DMIC_LOW_LEVEL 0x55 +#define PLATFORM_MIC_AMIC_LIN1RIN1 0xBB +#define PLATFORM_MIC_AMIC_LIN2RIN2 0xCC + +/* Speaker */ +#define PLATFORM_SPK_NONE 0x00 +#define PLATFORM_SPK_MONO 0x01 +#define PLATFORM_SPK_STEREO 0x02 + +/* Jack Detection */ +#define PLATFORM_HPDET_NORMAL 0x00 +#define PLATFORM_HPDET_INVERTED 0x01 + +/* PCM type (Port number + protocol) */ +/* + * RETURNED VALUE = 0x00, PCM PORT0, I2S + * 0x01, PCM PORT0, LJ + * 0x02, PCM PORT0, RJ + * 0x03, PCM PORT0, DSP-A + * 0x04, PCM PORT0, DSP-B + * 0x10, PCM PORT1, I2S + * 0x11, PCM PORT1, LJ + * 0x12, PCM PORT1, RJ + * 0x13, PCM PORT1, DSP-A + * 0x14, PCM PORT1, DSP-B + * 0xFF, Use default + * + * This is not used in Linux (defined by topology) and in + * Windows it's always DSP-A + */ + +/* Depop */ +#define PLATFORM_MIC_DE_POP_OFF 0x00 +#define PLATFORM_MIC_DE_POP_ON 0x01 + +/* Codec type */ +#define PLATFORM_CODEC_8316 16 +#define PLATFORM_CODEC_8326 26 +#define PLATFORM_CODEC_8336 36 +#define PLATFORM_CODEC_8395 95 +#define PLATFORM_CODEC_8396 96 + +/* Bus slot (on the host) */ +/* BIT[3:0] FOR BUS NUMBER, BIT[7:4] FOR SLOT NUMBER + * BIT[3:0] 0 for I2S0, 1 for IS21, 2 for I2S2. + * + * On Intel platforms this refers to SSP0..2. This information + * is not really useful for Linux, the information is already + * inferred from NHLT but can be used to double-check NHLT + */ + +/* Volume - Gain */ +#define LINEIN_GAIN_0db 0x00 /* gain = 0db */ +#define LINEIN_GAIN_3db 0x01 /* gain = +3db */ +#define LINEIN_GAIN_6db 0x02 /* gain = +6db */ +#define LINEIN_GAIN_9db 0x03 /* gain = +9db */ +#define LINEIN_GAIN_12db 0x04 /* gain = +12db */ +#define LINEIN_GAIN_15db 0x05 /* gain = +15db */ +#define LINEIN_GAIN_18db 0x06 /* gain = +18db */ +#define LINEIN_GAIN_21db 0x07 /* gain = +21db */ +#define LINEIN_GAIN_24db 0x08 /* gain = +24db */ +#define LINEIN_GAIN_27db 0x09 /* gain = +27db */ +#define LINEIN_GAIN_30db 0x0a /* gain = +30db */ + +#define ADC_GUI_STEP_3db 0x03 /* gain = +3db */ +#define ADC_GUI_STEP_6db 0x06 /* gain = +6db */ +#define ADC_GUI_STEP_10db 0x0a /* gain = +10db */ + +#define D2SEPGA_GAIN_0db 0x00 /* gain = 0db */ +#define D2SEPGA_GAIN_15db 0x01 /* gain = +15db */ + +/* ADC volume: base = 0db, -0.5db/setp, 0xc0 <-> -96db */ + +#define ADC_ALC_DISABLE 0x00 +#define ADC_ALC_ENABLE 0x01 + +#define ADC_ALC_TARGET_LEVEL_m16_5db 0x00 /* gain = -16.5db */ +#define ADC_ALC_TARGET_LEVEL_m15db 0x01 /* gain = -15db */ +#define ADC_ALC_TARGET_LEVEL_m13_5db 0x02 /* gain = -13.5db */ +#define ADC_ALC_TARGET_LEVEL_m12db 0x03 /* gain = -12db */ +#define ADC_ALC_TARGET_LEVEL_m10_5db 0x04 /* gain = -10.5db */ +#define ADC_ALC_TARGET_LEVEL_m9db 0x05 /* gain = -9db */ +#define ADC_ALC_TARGET_LEVEL_m7_5db 0x06 /* gain = -7.5db */ +#define ADC_ALC_TARGET_LEVEL_m6db 0x07 /* gain = -6db */ +#define ADC_ALC_TARGET_LEVEL_m4_5db 0x08 /* gain = -4.5db */ +#define ADC_ALC_TARGET_LEVEL_m_3db 0x09 /* gain = -3db */ +#define ADC_ALC_TARGET_LEVEL_m1_5db 0x0a /* gain = -1.5db */ + +#define ADC_ALC_MAXGAIN_m6_5db 0x00 /* gain = -6.5db */ +#define ADC_ALC_MAXGAIN_m5db 0x01 /* gain = -5db */ +#define ADC_ALC_MAXGAIN_m3_5db 0x02 /* gain = -3.5db */ +#define ADC_ALC_MAXGAIN_m2db 0x03 /* gain = -2db */ +#define ADC_ALC_MAXGAIN_m0_5db 0x04 /* gain = -0.5db */ +#define ADC_ALC_MAXGAIN_1db 0x05 /* gain = +1db */ +#define ADC_ALC_MAXGAIN_2_5db 0x06 /* gain = +2.5db */ +#define ADC_ALC_MAXGAIN_4db 0x07 /* gain = +4db */ +#define ADC_ALC_MAXGAIN_5_5db 0x08 /* gain = +5.5db */ +#define ADC_ALC_MAXGAIN_7db 0x09 /* gain = +7db */ +#define ADC_ALC_MAXGAIN_8_5db 0x0a /* gain = +8.5db */ +#define ADC_ALC_MAXGAIN_10db 0x0b /* gain = +10db */ +#define ADC_ALC_MAXGAIN_11_5db 0x0c /* gain = +11.5db */ +#define ADC_ALC_MAXGAIN_13db 0x0d /* gain = +13db */ +#define ADC_ALC_MAXGAIN_14_5db 0x0e /* gain = +14.5db */ +#define ADC_ALC_MAXGAIN_16db 0x0f /* gain = +16db */ +#define ADC_ALC_MAXGAIN_17_5db 0x10 /* gain = +17.5db */ +#define ADC_ALC_MAXGAIN_19db 0x11 /* gain = +19db */ +#define ADC_ALC_MAXGAIN_20_5db 0x12 /* gain = +20.5db */ +#define ADC_ALC_MAXGAIN_22db 0x13 /* gain = +22db */ +#define ADC_ALC_MAXGAIN_23_5db 0x14 /* gain = +23.5db */ +#define ADC_ALC_MAXGAIN_25db 0x15 /* gain = +25db */ +#define ADC_ALC_MAXGAIN_26_5db 0x16 /* gain = +26.5db */ +#define ADC_ALC_MAXGAIN_28db 0x17 /* gain = +28db */ +#define ADC_ALC_MAXGAIN_29_5db 0x18 /* gain = +29.5db */ +#define ADC_ALC_MAXGAIN_31db 0x19 /* gain = +31db */ +#define ADC_ALC_MAXGAIN_32_5db 0x1a /* gain = +32.5db */ +#define ADC_ALC_MAXGAIN_34db 0x1b /* gain = +34db */ +#define ADC_ALC_MAXGAIN_35_5db 0x1c /* gain = +35.5db */ + +#define ADC_ALC_MINGAIN_m12db 0x00 /* gain = -12db */ +#define ADC_ALC_MINGAIN_m10_5db 0x01 /* gain = -10.5db */ +#define ADC_ALC_MINGAIN_m9db 0x02 /* gain = -9db */ +#define ADC_ALC_MINGAIN_m7_5db 0x03 /* gain = -7.5db */ +#define ADC_ALC_MINGAIN_m6db 0x04 /* gain = -6db */ +#define ADC_ALC_MINGAIN_m4_51db 0x05 /* gain = -4.51db */ +#define ADC_ALC_MINGAIN_m3db 0x06 /* gain = -3db */ +#define ADC_ALC_MINGAIN_m1_5db 0x07 /* gain = -1.5db */ +#define ADC_ALC_MINGAIN_0db 0x08 /* gain = 0db */ +#define ADC_ALC_MINGAIN_1_5db 0x09 /* gain = +1.5db */ +#define ADC_ALC_MINGAIN_3db 0x0a /* gain = +3db */ +#define ADC_ALC_MINGAIN_4_5db 0x0b /* gain = +4.5db */ +#define ADC_ALC_MINGAIN_6db 0x0c /* gain = +6db */ +#define ADC_ALC_MINGAIN_7_5db 0x0d /* gain = +7.5db */ +#define ADC_ALC_MINGAIN_9db 0x0e /* gain = +9db */ +#define ADC_ALC_MINGAIN_10_5db 0x0f /* gain = +10.5db */ +#define ADC_ALC_MINGAIN_12db 0x10 /* gain = +12db */ +#define ADC_ALC_MINGAIN_13_5db 0x11 /* gain = +13.5db */ +#define ADC_ALC_MINGAIN_15db 0x12 /* gain = +15db */ +#define ADC_ALC_MINGAIN_16_5db 0x13 /* gain = +16.5db */ +#define ADC_ALC_MINGAIN_18db 0x14 /* gain = +18db */ +#define ADC_ALC_MINGAIN_19_5db 0x15 /* gain = +19.5db */ +#define ADC_ALC_MINGAIN_21db 0x16 /* gain = +21db */ +#define ADC_ALC_MINGAIN_22_5db 0x17 /* gain = +22.5db */ +#define ADC_ALC_MINGAIN_24db 0x18 /* gain = +24db */ +#define ADC_ALC_MINGAIN_25_5db 0x19 /* gain = +25.5db */ +#define ADC_ALC_MINGAIN_27db 0x1a /* gain = +27db */ +#define ADC_ALC_MINGAIN_28_5db 0x1b /* gain = +28.5db */ +#define ADC_ALC_MINGAIN_30db 0x1c /* gain = +30db */ + +/* ADC volume: step 1dB */ + +/* ALC Hold, Decay, Attack */ +#define ADC_ALC_HLDTIME_0_US 0x00 +#define ADC_ALC_HLDTIME_0000266_US 0x01 //time = 2.67ms +#define ADC_ALC_HLDTIME_0000533_US 0x02 //time = 5.33ms +#define ADC_ALC_HLDTIME_0001066_US 0x03 //time = 10.66ms +#define ADC_ALC_HLDTIME_0002132_US 0x04 //time = 21.32ms +#define ADC_ALC_HLDTIME_0004264_US 0x05 //time = 42.64ms +#define ADC_ALC_HLDTIME_0008538_US 0x06 //time = 85.38ms +#define ADC_ALC_HLDTIME_0017076_US 0x07 //time = 170.76ms +#define ADC_ALC_HLDTIME_0034152_US 0x08 //time = 341.52ms +#define ADC_ALC_HLDTIME_0680000_US 0x09 //time = 0.68s +#define ADC_ALC_HLDTIME_1360000_US 0x0a //time = 1.36s + +#define ADC_ALC_DCYTIME_000410_US 0x00 //time = 410us +#define ADC_ALC_DCYTIME_000820_US 0x01 //time = 820us +#define ADC_ALC_DCYTIME_001640_US 0x02 //time = 1.64ms +#define ADC_ALC_DCYTIME_003280_US 0x03 //time = 3.28ms +#define ADC_ALC_DCYTIME_006560_US 0x04 //time = 6.56ms +#define ADC_ALC_DCYTIME_013120_US 0x05 //time = 13.12ms +#define ADC_ALC_DCYTIME_026240_US 0x06 //time = 26.24ms +#define ADC_ALC_DCYTIME_058480_US 0x07 //time = 52.48ms +#define ADC_ALC_DCYTIME_104960_US 0x08 //time = 104.96ms +#define ADC_ALC_DCYTIME_209920_US 0x09 //time = 209.92ms +#define ADC_ALC_DCYTIME_420000_US 0x0a //time = 420ms + +#define ADC_ALC_ATKTIME_000104_US 0x00 //time = 104us +#define ADC_ALC_ATKTIME_000208_US 0x01 //time = 208us +#define ADC_ALC_ATKTIME_000416_US 0x02 //time = 416ms +#define ADC_ALC_ATKTIME_003832_US 0x03 //time = 832ms +#define ADC_ALC_ATKTIME_001664_US 0x04 //time = 1.664ms +#define ADC_ALC_ATKTIME_003328_US 0x05 //time = 3.328ms +#define ADC_ALC_ATKTIME_006656_US 0x06 //time = 6.656ms +#define ADC_ALC_ATKTIME_013312_US 0x07 //time = 13.312ms +#define ADC_ALC_ATKTIME_026624_US 0x08 //time = 26.624ms +#define ADC_ALC_ATKTIME_053248_US 0x09 //time = 53.248ms +#define ADC_ALC_ATKTIME_106496_US 0x0a //time = 106.496ms + +/* ALC Noise Gate */ +#define ADC_ALC_NGTYPE_DISABLE 0x00 //noise gate disable +#define ADC_ALC_NGTYPE_ENABLE_HOLD 0x01 //noise gate enable, hold gain type +#define ADC_ALC_NGTYPE_ENABLE_MUTE 0x03 //noise gate enable, mute type + +#define ADC_ALC_NGTHLD_m76_5db 0x00 /* Threshold = -76.5db */ +#define ADC_ALC_NGTHLD_m75db 0x01 /* Threshold = -75db */ +#define ADC_ALC_NGTHLD_m73_5db 0x02 /* Threshold = -73.5db */ +#define ADC_ALC_NGTHLD_m72db 0x03 /* Threshold = -72db */ +#define ADC_ALC_NGTHLD_m70_5db 0x04 /* Threshold = -70.5db */ +#define ADC_ALC_NGTHLD_m69db 0x05 /* Threshold = -69db */ +#define ADC_ALC_NGTHLD_m67_5db 0x06 /* Threshold = -67.5db */ +#define ADC_ALC_NGTHLD_m66db 0x07 /* Threshold = -66db */ +#define ADC_ALC_NGTHLD_m64_5db 0x08 /* Threshold = -64.5db */ +#define ADC_ALC_NGTHLD_m63db 0x09 /* Threshold = -63db */ +#define ADC_ALC_NGTHLD_m61_5db 0x0a /* Threshold = -61.5db */ +#define ADC_ALC_NGTHLD_m60db 0x0b /* Threshold = -60db */ +#define ADC_ALC_NGTHLD_m58_5db 0x0c /* Threshold = -58.5db */ +#define ADC_ALC_NGTHLD_m57db 0x0d /* Threshold = -57db */ +#define ADC_ALC_NGTHLD_m55_5db 0x0e /* Threshold = -55.5db */ +#define ADC_ALC_NGTHLD_m54db 0x0f /* Threshold = -54db */ +#define ADC_ALC_NGTHLD_m52_5db 0x10 /* Threshold = -52.5db */ +#define ADC_ALC_NGTHLD_m51db 0x11 /* Threshold = -51db */ +#define ADC_ALC_NGTHLD_m49_5db 0x12 /* Threshold = -49.5db */ +#define ADC_ALC_NGTHLD_m48db 0x13 /* Threshold = -48db */ +#define ADC_ALC_NGTHLD_m46_5db 0x14 /* Threshold = -46.5db */ +#define ADC_ALC_NGTHLD_m45db 0x15 /* Threshold = -45db */ +#define ADC_ALC_NGTHLD_m43_5db 0x16 /* Threshold = -43.5db */ +#define ADC_ALC_NGTHLD_m42db 0x17 /* Threshold = -42db */ +#define ADC_ALC_NGTHLD_m40_5db 0x18 /* Threshold = -40.5db */ +#define ADC_ALC_NGTHLD_m39db 0x19 /* Threshold = -39db */ +#define ADC_ALC_NGTHLD_m37_5db 0x1a /* Threshold = -37.5db */ +#define ADC_ALC_NGTHLD_m36db 0x1b /* Threshold = -36db */ +#define ADC_ALC_NGTHLD_m34_5db 0x1c /* Threshold = -34.5db */ +#define ADC_ALC_NGTHLD_m33db 0x1d /* Threshold = -33db */ +#define ADC_ALC_NGTHLD_m31_5db 0x1e /* Threshold = -31.5db */ +#define ADC_ALC_NGTHLD_m30db 0x1f /* Threshold = -30db */ + +/* Headphone dummy - Windows Specific flag, not needed for Linux */ + +/* HPMIX HIGAIN and VOLUME */ +#define DAC_HPMIX_HIGAIN_0db 0x00 /* gain = 0db */ +#define DAC_HPMIX_HIGAIN_m6db 0x88 /* gain = -6db */ + +#define DAC_HPMIX_VOLUME_m12db 0x00 /* volume = -12db */ +#define DAC_HPMIX_VOLUME_m10_5db 0x11 /* volume = -10.5db */ +#define DAC_HPMIX_VOLUME_m9db 0x22 /* volume = -9db */ +#define DAC_HPMIX_VOLUME_m7_5db 0x33 /* volume = -7.5db */ +#define DAC_HPMIX_VOLUME_m6db 0x44 /* volume = -6db */ +#define DAC_HPMIX_VOLUME_m4_5db 0x88 /* volume = -4.5db */ +#define DAC_HPMIX_VOLUME_m3db 0x99 /* volume = -3db */ +#define DAC_HPMIX_VOLUME_m1_5db 0xaa /* volume = -1.5db */ +#define DAC_HPMIX_VOLUME_0db 0xbb /* volume = 0db */ + +/* HPOUT VOLUME */ +#define DAC_HPOUT_VOLUME_0db 0x00 /* volume = 0db */ +#define DAC_HPOUT_VOLUME_m12db 0x11 /* volume = -12db */ +#define DAC_HPOUT_VOLUME_m24db 0x22 /* volume = -24db */ +#define DAC_HPOUT_VOLUME_m48db 0x33 /* volume = -48db */ + +/* LDAC/RDAC volume = 0db, -0.5db/setp, 0xc0 <-> -96db */ + +/* Automute */ +#define DAC_AUTOMUTE_NONE 0x00 /* no automute */ +#define DAC_AUTOMUTE_DIGITAL 0x01 /* digital mute */ +#define DAC_AUTOMUTE_ANALOG 0x02 /* analog mute */ + +/* Mono - Windows specific, on Linux the information comes from DAI/topology */ +#define HEADPHONE_MONO 0x01 /* on channel */ +#define HEADPHONE_STEREO 0x00 /* stereo */ + +/* Speaker and headphone GPIO control */ +#define GPIO_CTL_IO_LEVEL_LOW 0x00 /* low level enable */ +#define GPIO_CTL_IO_LEVEL_HIGH 0x01 /* high level enable */ + +/* GPIO */ +/* FIXME: for ES8396, no need to use */ + +/* Platform clocks */ +/* + * BCLK AND MCLK FREQ + * BIT[7:4] MCLK FREQ + * 0 - 19.2MHz + * 1 - 24MHz + * 2 - 12.288MHz + * F - Default for 19.2MHz + * + * BIT[3:0] BCLK FREQ + * 0 - 4.8MHz + * 1 - 2.4MHz + * 2 - 2.304MHz + * 3 - 3.072MHz + * 4 - 4.096MHz + * F - Default for 4.8MHz + */ + +int es83xx_dsm(struct device *dev, int arg, int *value); +int es83xx_dsm_dump(struct device *dev); + +#endif
From: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com
Instead of adding DMI quirks for each new tablet model which uses the ESS8316 codec, the plan is to switch to querying the same ACPI Device-Specific-Method (DSM) as Windows uses to determine things like speaker and mic routing.
Call the new es83xx_dsm_dump() helper which logs various basic settings which can be queried through the ACPI DSM method on the codec ACPI device, this is intended to help with developing a DSM based solution to replace most DMI quirks.
Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com [hdegoede@redhat.com: improve commit message] Signed-off-by: Hans de Goede hdegoede@redhat.com --- sound/soc/intel/boards/Kconfig | 1 + sound/soc/intel/boards/bytcht_es8316.c | 3 +++ 2 files changed, 4 insertions(+)
diff --git a/sound/soc/intel/boards/Kconfig b/sound/soc/intel/boards/Kconfig index 9e427f00deac..7368628e7781 100644 --- a/sound/soc/intel/boards/Kconfig +++ b/sound/soc/intel/boards/Kconfig @@ -229,6 +229,7 @@ config SND_SOC_INTEL_BYT_CHT_ES8316_MACH depends on GPIOLIB || COMPILE_TEST select SND_SOC_ACPI select SND_SOC_ES8316 + select SND_SOC_ES83XX_DSM_COMMON help This adds support for ASoC machine driver for Intel(R) Baytrail & Cherrytrail platforms with ES8316 audio codec. diff --git a/sound/soc/intel/boards/bytcht_es8316.c b/sound/soc/intel/boards/bytcht_es8316.c index 8a0b0e864fbb..e6ab1ee6ab29 100644 --- a/sound/soc/intel/boards/bytcht_es8316.c +++ b/sound/soc/intel/boards/bytcht_es8316.c @@ -27,6 +27,7 @@ #include <sound/pcm_params.h> #include <sound/soc.h> #include <sound/soc-acpi.h> +#include "../../codecs/es83xx-dsm-common.h" #include "../atom/sst-atom-controls.h" #include "../common/soc-intel-quirks.h"
@@ -520,6 +521,8 @@ static int snd_byt_cht_es8316_mc_probe(struct platform_device *pdev) return ret; }
+ es83xx_dsm_dump(priv->codec_dev); + /* Check for BYTCR or other platform and setup quirks */ dmi_id = dmi_first_match(byt_cht_es8316_quirk_table); if (dmi_id) {
Add a is_bytcr helper variable to probe().
This is a preparation patch for determining the quirks through querying the ACPI Device-Specific-Method (DSM) on the codec-device.
Signed-off-by: Hans de Goede hdegoede@redhat.com --- sound/soc/intel/boards/bytcht_es8316.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/sound/soc/intel/boards/bytcht_es8316.c b/sound/soc/intel/boards/bytcht_es8316.c index e6ab1ee6ab29..0d6574678317 100644 --- a/sound/soc/intel/boards/bytcht_es8316.c +++ b/sound/soc/intel/boards/bytcht_es8316.c @@ -471,10 +471,10 @@ static int snd_byt_cht_es8316_mc_probe(struct platform_device *pdev) struct byt_cht_es8316_private *priv; const struct dmi_system_id *dmi_id; struct fwnode_handle *fwnode; + bool sof_parent, is_bytcr; const char *platform_name; struct acpi_device *adev; struct device *codec_dev; - bool sof_parent; unsigned int cnt = 0; int dai_index = 0; int i; @@ -524,11 +524,11 @@ static int snd_byt_cht_es8316_mc_probe(struct platform_device *pdev) es83xx_dsm_dump(priv->codec_dev);
/* Check for BYTCR or other platform and setup quirks */ + is_bytcr = soc_intel_is_byt() && mach->mach_params.acpi_ipc_irq_index == 0; dmi_id = dmi_first_match(byt_cht_es8316_quirk_table); if (dmi_id) { quirk = (unsigned long)dmi_id->driver_data; - } else if (soc_intel_is_byt() && - mach->mach_params.acpi_ipc_irq_index == 0) { + } else if (is_bytcr) { /* On BYTCR default to SSP0, internal-mic-in2-map, mono-spk */ quirk = BYT_CHT_ES8316_SSP0 | BYT_CHT_ES8316_INTMIC_IN2_MAP | BYT_CHT_ES8316_MONO_SPEAKER;
Add support for querying the same ACPI Device-Specific-Method (DSM) as Windows uses to determine things like speaker and mic routing.
This avoids the need to add DMI quirks for each new ESS8316 tablet model.
This has been tested on the following devices:
1. Chuwi Hi12 CHT with stereo speakers and IN2-mic-map, this avoids the need to add a DMI quirk for this model.
2. Nanote UMPC-01 CHT with stereo speakers and IN1-mic-map, the existing DMI quirk is still necessary because of a bug in the DSM return values for the speakers (it returns mono).
3. Onda V80 plus CHT with mono speaker and IN1-mic-map, DSM set quirks match the previously used defaults.
4. GP-electronic T701 BYT with mono speaker and IN2-mic-map, DSM set quirks match the previously used defaults.
Signed-off-by: Hans de Goede hdegoede@redhat.com --- sound/soc/intel/boards/bytcht_es8316.c | 62 ++++++++++++++++++++++++++ 1 file changed, 62 insertions(+)
diff --git a/sound/soc/intel/boards/bytcht_es8316.c b/sound/soc/intel/boards/bytcht_es8316.c index 0d6574678317..1564a88a885e 100644 --- a/sound/soc/intel/boards/bytcht_es8316.c +++ b/sound/soc/intel/boards/bytcht_es8316.c @@ -462,6 +462,66 @@ static const struct dmi_system_id byt_cht_es8316_quirk_table[] = { {} };
+static int byt_cht_es8316_get_quirks_from_dsm(struct byt_cht_es8316_private *priv, + bool is_bytcr) +{ + int ret, val1, val2, dsm_quirk = 0; + + if (is_bytcr) + dsm_quirk |= BYT_CHT_ES8316_SSP0; + + ret = es83xx_dsm(priv->codec_dev, PLATFORM_MAINMIC_TYPE_ARG, &val1); + if (ret < 0) + return ret; + + ret = es83xx_dsm(priv->codec_dev, PLATFORM_HPMIC_TYPE_ARG, &val2); + if (ret < 0) + return ret; + + if (val1 == PLATFORM_MIC_AMIC_LIN1RIN1 && val2 == PLATFORM_MIC_AMIC_LIN2RIN2) { + dsm_quirk |= BYT_CHT_ES8316_INTMIC_IN1_MAP; + } else if (val1 == PLATFORM_MIC_AMIC_LIN2RIN2 && val2 == PLATFORM_MIC_AMIC_LIN1RIN1) { + dsm_quirk |= BYT_CHT_ES8316_INTMIC_IN2_MAP; + } else { + dev_warn(priv->codec_dev, "Unknown mic settings mainmic 0x%02x hpmic 0x%02x\n", + val1, val2); + return -EINVAL; + } + + ret = es83xx_dsm(priv->codec_dev, PLATFORM_SPK_TYPE_ARG, &val1); + if (ret < 0) + return ret; + + switch (val1) { + case PLATFORM_SPK_MONO: + dsm_quirk |= BYT_CHT_ES8316_MONO_SPEAKER; + break; + case PLATFORM_SPK_STEREO: + break; + default: + dev_warn(priv->codec_dev, "Unknown speaker setting 0x%02x\n", val1); + return -EINVAL; + } + + ret = es83xx_dsm(priv->codec_dev, PLATFORM_HPDET_INV_ARG, &val1); + if (ret < 0) + return ret; + + switch (val1) { + case PLATFORM_HPDET_NORMAL: + break; + case PLATFORM_HPDET_INVERTED: + dsm_quirk |= BYT_CHT_ES8316_JD_INVERTED; + break; + default: + dev_warn(priv->codec_dev, "Unknown hpdet-inv setting 0x%02x\n", val1); + return -EINVAL; + } + + quirk = dsm_quirk; + return 0; +} + static int snd_byt_cht_es8316_mc_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -528,6 +588,8 @@ static int snd_byt_cht_es8316_mc_probe(struct platform_device *pdev) dmi_id = dmi_first_match(byt_cht_es8316_quirk_table); if (dmi_id) { quirk = (unsigned long)dmi_id->driver_data; + } else if (!byt_cht_es8316_get_quirks_from_dsm(priv, is_bytcr)) { + dev_info(dev, "Using ACPI DSM info for quirks\n"); } else if (is_bytcr) { /* On BYTCR default to SSP0, internal-mic-in2-map, mono-spk */ quirk = BYT_CHT_ES8316_SSP0 | BYT_CHT_ES8316_INTMIC_IN2_MAP |
On 12/2/23 06:39, Hans de Goede wrote:
Hi All,
This takes some of the work done to auto-configure quirks/routing for ESS83xx codecs by getting the info from ACPI from: https://github.com/thesofproject/linux/pull/4112
And then builds on top of this to add auto-configuration to the bytcht_es8316 board driver.
Changes in v2:
- Move es83xx-dsm-common.c back to sound/soc/codecs like the original version from: https://github.com/thesofproject/linux/pull/4112/
Note compared to the pull-request, which deals with the ES8336, this series deals with the ES8316 (for which I have several devices to test on) and this moves handling of the _DSM from the codec driver to the board driver since with the ES8316 the board driver takes care of setting up various routes for things like the mic and speakers.
After this series audio now works properly on a CHT Chuwi Hi12 tablet without needing to add an extra quirk for that model.
This has also been tested on the following devices, where things are unchanged from before (the ACPI autoconfiguration gives the same results as the old defaults) :
Onda V80 plus (CHT) GP-electronic T701 (BYT)
I also tested this on a Nanote UMPC-01, here the _DSM result for PLATFORM_SPK_TYPE_ARG wrongly returns 1 (mono) while the device actually has 2 speakers, so this model needs to keep its DMI quirk.
I don't have an IRBIS NB41 nor a TECLAST X98 Plus II, so the DMI quirks for those are left in place too on a better safe then sorry basis.
Thanks Hans!
Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com
On Sat, 02 Dec 2023 13:39:42 +0100, Hans de Goede wrote:
This takes some of the work done to auto-configure quirks/routing for ESS83xx codecs by getting the info from ACPI from: https://github.com/thesofproject/linux/pull/4112
And then builds on top of this to add auto-configuration to the bytcht_es8316 board driver.
[...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/4] ASoC: es83xx: add ACPI DSM helper module commit: 9c8bec3b63255ca04e5dad87471a35790aec06dc [2/4] ASoC: Intel: bytcht_es8316: Dump basic _DSM information commit: b71e1d3789946a20e0e34349f4a874604ac65c3e [3/4] ASoC: Intel: bytcht_es8316: Add is_bytcr helper variable commit: e8acf91a4013202934313f3c2968e6962daaffff [4/4] ASoC: Intel: bytcht_es8316: Determine quirks/routing with codec-dev ACPI DSM commit: 7650862f4e72d2533356ec001b8ea8d5839aced0
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
participants (3)
-
Hans de Goede -
Mark Brown -
Pierre-Louis Bossart