[PATCH] ASoC: wm8524: remove rate constraint for FE-BE case
The constraint is propagate to Front End Bitstream for Front End and Back End share same snd_soc_pcm_runtime.
The constraint is not needed for Back End Bitstream when there is be_hw_params_fixup() defined.
Signed-off-by: Shengjiu Wang shengjiu.wang@nxp.com Tested-by: Fabio Estevam festevam@denx.de --- sound/soc/codecs/wm8524.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/sound/soc/codecs/wm8524.c b/sound/soc/codecs/wm8524.c index 81f858f6bd67..442a59857875 100644 --- a/sound/soc/codecs/wm8524.c +++ b/sound/soc/codecs/wm8524.c @@ -61,6 +61,7 @@ static int wm8524_startup(struct snd_pcm_substream *substream, { struct snd_soc_component *component = dai->component; struct wm8524_priv *wm8524 = snd_soc_component_get_drvdata(component); + struct snd_soc_pcm_runtime *rtd = substream->private_data;
/* The set of sample rates that can be supported depends on the * MCLK supplied to the CODEC - enforce this. @@ -71,9 +72,10 @@ static int wm8524_startup(struct snd_pcm_substream *substream, return -EINVAL; }
- snd_pcm_hw_constraint_list(substream->runtime, 0, - SNDRV_PCM_HW_PARAM_RATE, - &wm8524->rate_constraint); + if (!rtd->dai_link->be_hw_params_fixup) + snd_pcm_hw_constraint_list(substream->runtime, 0, + SNDRV_PCM_HW_PARAM_RATE, + &wm8524->rate_constraint);
gpiod_set_value_cansleep(wm8524->mute, 1);
On Tue, Apr 12, 2022 at 05:13:46PM +0800, Shengjiu Wang wrote:
The constraint is propagate to Front End Bitstream for Front End and Back End share same snd_soc_pcm_runtime.
The constraint is not needed for Back End Bitstream when there is be_hw_params_fixup() defined.
- snd_pcm_hw_constraint_list(substream->runtime, 0,
SNDRV_PCM_HW_PARAM_RATE,&wm8524->rate_constraint);
- if (!rtd->dai_link->be_hw_params_fixup)
snd_pcm_hw_constraint_list(substream->runtime, 0,SNDRV_PCM_HW_PARAM_RATE,&wm8524->rate_constraint);
This applies in general to constraints set by the CODEC, it's not something that should be fixed at the driver level. Peering into the runtime to see if DPCM is doing anything isn't a great solution here, nor is having to open code it into the driver. I already had it in the back of my head to generalise the set constraints based on sysclk pattern into the core, that might be productive here.
On Tue, Apr 12, 2022 at 8:39 PM Mark Brown broonie@kernel.org wrote:
On Tue, Apr 12, 2022 at 05:13:46PM +0800, Shengjiu Wang wrote:
The constraint is propagate to Front End Bitstream for Front End and Back End share same snd_soc_pcm_runtime.
The constraint is not needed for Back End Bitstream when there is be_hw_params_fixup() defined.
snd_pcm_hw_constraint_list(substream->runtime, 0,SNDRV_PCM_HW_PARAM_RATE,&wm8524->rate_constraint);
if (!rtd->dai_link->be_hw_params_fixup)snd_pcm_hw_constraint_list(substream->runtime, 0,SNDRV_PCM_HW_PARAM_RATE,&wm8524->rate_constraint);This applies in general to constraints set by the CODEC, it's not something that should be fixed at the driver level. Peering into the runtime to see if DPCM is doing anything isn't a great solution here, nor is having to open code it into the driver. I already had it in the back of my head to generalise the set constraints based on sysclk pattern into the core, that might be productive here.
I also hesitate to add this in the codec driver. I agree that it is better to be put in the core.
When will you have a patch for this?
Best regards Wang Shengjiu
On Tue, Apr 12, 2022 at 09:18:16PM +0800, Shengjiu Wang wrote:
On Tue, Apr 12, 2022 at 8:39 PM Mark Brown broonie@kernel.org wrote:
nor is having to open code it into the driver. I already had it in the back of my head to generalise the set constraints based on sysclk pattern into the core, that might be productive here.
I also hesitate to add this in the codec driver. I agree that it is better to be put in the core.
When will you have a patch for this?
Dunno, no fixed plans - it partly depends on how gummed up other stuff I'm doing is waiting for review.
participants (3)
-
Mark Brown -
Shengjiu Wang -
Shengjiu Wang