[alsa-devel] [PATCH RESEND] ASoC: rt1011: Add R0 temperature and TDM1 ADC2DAT Swap control
From: Shuming Fan shumingf@realtek.com
- The user level application could set the R0 temperature after booting system. The degree Celsius of R0 temperature store in the non-volatile space when doing R0 calibration. - TDM1 ADC2DAT Swap controls use to control TDM slot2/3 data
Signed-off-by: Shuming Fan shumingf@realtek.com --- sound/soc/codecs/rt1011.c | 9 ++++++++- sound/soc/codecs/rt1011.h | 1 + 2 files changed, 9 insertions(+), 1 deletion(-)
diff --git a/sound/soc/codecs/rt1011.c b/sound/soc/codecs/rt1011.c index 0a6ff13d76e1..b25b4c1127ca 100644 --- a/sound/soc/codecs/rt1011.c +++ b/sound/soc/codecs/rt1011.c @@ -1029,6 +1029,8 @@ static const char * const rt1011_tdm_adc_swap_select[] = {
static SOC_ENUM_SINGLE_DECL(rt1011_tdm_adc1_1_enum, RT1011_TDM1_SET_3, 6, rt1011_tdm_adc_swap_select); +static SOC_ENUM_SINGLE_DECL(rt1011_tdm_adc2_1_enum, RT1011_TDM1_SET_3, 4, + rt1011_tdm_adc_swap_select);
static void rt1011_reset(struct regmap *regmap) { @@ -1333,7 +1335,8 @@ static const struct snd_kcontrol_new rt1011_snd_controls[] = { /* TDM1 Data Out Selection */ SOC_ENUM("TDM1 DOUT Source", rt1011_tdm1_adc1_dat_enum), SOC_ENUM("TDM1 DOUT Location", rt1011_tdm1_adc1_loc_enum), - SOC_ENUM("TDM1 ADCDAT Swap Select", rt1011_tdm_adc1_1_enum), + SOC_ENUM("TDM1 ADC1DAT Swap Select", rt1011_tdm_adc1_1_enum), + SOC_ENUM("TDM1 ADC2DAT Swap Select", rt1011_tdm_adc2_1_enum),
/* Data Out Mode */ SOC_ENUM("I2S ADC DOUT Mode", rt1011_adc_dout_mode_enum), @@ -1355,6 +1358,10 @@ static const struct snd_kcontrol_new rt1011_snd_controls[] = { SOC_SINGLE_EXT("R0 Calibration", SND_SOC_NOPM, 0, 1, 0, rt1011_r0_cali_get, rt1011_r0_cali_put), RT1011_R0_LOAD("R0 Load Mode"), + + /* R0 temperature */ + SOC_SINGLE("R0 Temperature", RT1011_STP_INITIAL_RESISTANCE_TEMP, + 2, 255, 0), };
static int rt1011_is_sys_clk_from_pll(struct snd_soc_dapm_widget *source, diff --git a/sound/soc/codecs/rt1011.h b/sound/soc/codecs/rt1011.h index 98a38800c4df..5d431d7f1d16 100644 --- a/sound/soc/codecs/rt1011.h +++ b/sound/soc/codecs/rt1011.h @@ -227,6 +227,7 @@ #define RT1011_STP_CALIB_RS_TEMP 0x152a #define RT1011_INIT_RECIPROCAL_REG_24_16 0x1538 #define RT1011_INIT_RECIPROCAL_REG_15_0 0x1539 +#define RT1011_STP_INITIAL_RESISTANCE_TEMP 0x153c #define RT1011_STP_ALPHA_RECIPROCAL_MSB 0x153e #define RT1011_SPK_RESISTANCE_1 0x1544 #define RT1011_SPK_RESISTANCE_2 0x1546
The patch
ASoC: rt1011: Add R0 temperature and TDM1 ADC2DAT Swap control
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-5.4
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
From 3403b808a0eb6d25883b72a6c4d2a4a452f8a233 Mon Sep 17 00:00:00 2001
From: Shuming Fan shumingf@realtek.com Date: Tue, 6 Aug 2019 17:14:35 +0800 Subject: [PATCH] ASoC: rt1011: Add R0 temperature and TDM1 ADC2DAT Swap control
- The user level application could set the R0 temperature after booting system. The degree Celsius of R0 temperature store in the non-volatile space when doing R0 calibration. - TDM1 ADC2DAT Swap controls use to control TDM slot2/3 data
Signed-off-by: Shuming Fan shumingf@realtek.com Link: https://lore.kernel.org/r/20190806091435.14329-1-shumingf@realtek.com Signed-off-by: Mark Brown broonie@kernel.org --- sound/soc/codecs/rt1011.c | 9 ++++++++- sound/soc/codecs/rt1011.h | 1 + 2 files changed, 9 insertions(+), 1 deletion(-)
diff --git a/sound/soc/codecs/rt1011.c b/sound/soc/codecs/rt1011.c index 0a6ff13d76e1..b25b4c1127ca 100644 --- a/sound/soc/codecs/rt1011.c +++ b/sound/soc/codecs/rt1011.c @@ -1029,6 +1029,8 @@ static const char * const rt1011_tdm_adc_swap_select[] = {
static SOC_ENUM_SINGLE_DECL(rt1011_tdm_adc1_1_enum, RT1011_TDM1_SET_3, 6, rt1011_tdm_adc_swap_select); +static SOC_ENUM_SINGLE_DECL(rt1011_tdm_adc2_1_enum, RT1011_TDM1_SET_3, 4, + rt1011_tdm_adc_swap_select);
static void rt1011_reset(struct regmap *regmap) { @@ -1333,7 +1335,8 @@ static const struct snd_kcontrol_new rt1011_snd_controls[] = { /* TDM1 Data Out Selection */ SOC_ENUM("TDM1 DOUT Source", rt1011_tdm1_adc1_dat_enum), SOC_ENUM("TDM1 DOUT Location", rt1011_tdm1_adc1_loc_enum), - SOC_ENUM("TDM1 ADCDAT Swap Select", rt1011_tdm_adc1_1_enum), + SOC_ENUM("TDM1 ADC1DAT Swap Select", rt1011_tdm_adc1_1_enum), + SOC_ENUM("TDM1 ADC2DAT Swap Select", rt1011_tdm_adc2_1_enum),
/* Data Out Mode */ SOC_ENUM("I2S ADC DOUT Mode", rt1011_adc_dout_mode_enum), @@ -1355,6 +1358,10 @@ static const struct snd_kcontrol_new rt1011_snd_controls[] = { SOC_SINGLE_EXT("R0 Calibration", SND_SOC_NOPM, 0, 1, 0, rt1011_r0_cali_get, rt1011_r0_cali_put), RT1011_R0_LOAD("R0 Load Mode"), + + /* R0 temperature */ + SOC_SINGLE("R0 Temperature", RT1011_STP_INITIAL_RESISTANCE_TEMP, + 2, 255, 0), };
static int rt1011_is_sys_clk_from_pll(struct snd_soc_dapm_widget *source, diff --git a/sound/soc/codecs/rt1011.h b/sound/soc/codecs/rt1011.h index 98a38800c4df..5d431d7f1d16 100644 --- a/sound/soc/codecs/rt1011.h +++ b/sound/soc/codecs/rt1011.h @@ -227,6 +227,7 @@ #define RT1011_STP_CALIB_RS_TEMP 0x152a #define RT1011_INIT_RECIPROCAL_REG_24_16 0x1538 #define RT1011_INIT_RECIPROCAL_REG_15_0 0x1539 +#define RT1011_STP_INITIAL_RESISTANCE_TEMP 0x153c #define RT1011_STP_ALPHA_RECIPROCAL_MSB 0x153e #define RT1011_SPK_RESISTANCE_1 0x1544 #define RT1011_SPK_RESISTANCE_2 0x1546
participants (2)
-
Mark Brown -
shumingf＠realtek.com