[alsa-devel] [PATCH v3] ASoC: docs: add clocking examples for DAI formats
Provide *our* view of what the rules are for the different DAI formats, so that we do not have to trust external interpretations for this crucial bit of interoperability.
Signed-off-by: Peter Rosin peda@axentia.se --- Documentation/sound/alsa/soc/clocking.txt | 146 +++++++++++++++++++++++++++++- 1 file changed, 144 insertions(+), 2 deletions(-)
Changed PCM mode A to start left word one BCLK after positive LRC edge. Added link to I2S spec as indicated by Mark Brown.
Cheers, Peter
diff --git a/Documentation/sound/alsa/soc/clocking.txt b/Documentation/sound/alsa/soc/clocking.txt index b1300162e01c..7eb02f0758e7 100644 --- a/Documentation/sound/alsa/soc/clocking.txt +++ b/Documentation/sound/alsa/soc/clocking.txt @@ -47,5 +47,147 @@ rate, number of channels and word size) to save on power. It is also desirable to use the codec (if possible) to drive (or master) the audio clocks as it usually gives more accurate sample rates than the CPU.
- - +The below diagrams all have BCLK as the first signal, LRC as the second signal +and DATA as the third. Below that is an indication about which DATA bits belong +in what channel. + +A "..." marking as DATA indicates that there may be more bits that are not +shown. Also, all DATA bits marked X may or may not be present. DAI +transmitters must add them should LRC not match the word size exactly and DAI +receivers must be prepared to ignore them. DAI transmitters must insert zeros +for I2S and Left Justified modes, and preferably not drive DATA for the DSP +modes for these extra X bits. + + +I2S + +LRC should have its flanks synchronized with a negative flank of BCLK. +The left channel word starts one BCLK cycle after a negative flank of LRC, and +the right channel word starts one BCLK cycle after a positive flank of LRC. The +words start with the MSB. Receivers must truncate words if more bits per word +are transmitted than they can use, and transmitters must pad words with zeros +if LRC is not matching the word size. Also, see +https://www.sparkfun.com/datasheets/BreakoutBoards/I2SBUS.pdf + + .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. +-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '- +---. .-------------------------------. + '-------------------------------' '----- +---.---.---.---.---.---.---.---.---.---.---.---.---.---.---.---.---.---.- + | |MSB| |...| |LSB| X |...| X |MSB| |...| |LSB| X |...| X | +---'---'---'---'---'---'---'---'---'---'---'---'---'---'---'---'---'---'- + | Left channel | Right channel | + + +Left Justified (aka MSB) + +LRC should have its flanks synchronized with a negative flank of BCLK. +The left channel word starts directly after a positive flank of LRC, and the +right channel word starts directly after a negative flank of LRC. The words +start with the MSB. Receivers must truncate words if more bits per word are +transmitted than they can use, and transmitters must pad words with zeros if +LRC is not matching the word size. + + .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. +-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '- + .-------------------------------. .----- +---' '-------------------------------' +---.---.---.---.---.---.---.---.---.---.---.---.---.---.---.---.---.---.- + |MSB| |...| |LSB| X |...| X |MSB| |...| |LSB| X |...| X | | +---'---'---'---'---'---'---'---'---'---'---'---'---'---'---'---'---'---'- + | Left channel | Right channel | + + +Right Justified (aka LSB) + +LRC should have its flanks synchronized with a negative flank of BCLK. +The left channel word end right before a negative flank of LRC, and the right +channel word ends right before a positive flank of LRC. The words end with LSB. +Transmitters must pad words if LRC is not matching the word size and the +transmitter and the receiver have to agree on the word leghth. + + .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. +-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '- + .-------------------------------. .----- +---' '-------------------------------' +---.---.---.---.---.---.---.---.---.---.---.---.---.---.---.---.---.---.- + | X |...| X |MSB| |...| |LSB| X |...| X |MSB| |...| |LSB| | +---'---'---'---'---'---'---'---'---'---'---'---'---'---'---'---'---'---'- + | Left channel | Right channel | + + +DSP mode A + +LRC should have positive flanks synchronized with a negative flank of BCLK. +The left channel word starts one BCLK after a positive flank of LRC, and the +right channel word starts directly after the left channel word. The words +start with MSB. + + .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. +-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '- + .- .- + -' -' +---.---.---.---.---.---.---.---.---.---.---.---.---.---.---.---.---.---.- + | |MSB| |...| |LSB|MSB| |...| |LSB| X | |...| | X | | +---'---'---'---'---'---'---'---'---'---'---'---'---'---'---'---'---'---'- + | Left channel | Right channel | | + +LRC examples for DSP mode A + .---. .---. +---' '-------------------------------------------------------' '----- + .-. .-. +---' '---------------------------------------------------------' '------- +-. .---------------------------------------------------------. .--------- + '-' '-' + + +DSP mode B + +LRC should have positive flanks synchronized with a negative flank of BCLK. +The left channel word starts directly after a positive flank of LRC, and the +right channel word starts directly after the left channel word. The words +start with MSB. + + .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. +-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '- + .- .- + -' -' +---.---.---.---.---.---.---.---.---.---.---.---.---.---.---.---.---.---.- + |MSB| |...| |LSB|MSB| |...| |LSB| X | |...| | X | | | +---'---'---'---'---'---'---'---'---'---'---'---'---'---'---'---'---'---'- + | Left channel | Right channel | | + +LRC examples for DSP mode B + .---. .---. +---' '-------------------------------------------------------' '----- +-. .---------------------------------------------------------. .--------- + '-' '-' + + +The above diagrams show normal BCLK and LRC clocking where DAI transmitters +change DATA on the falling edge of BCLK and DAI receivers read DATA on the +rising edge. For inverted BCLK it is naturally the other way around. Inverted +LRC is just that. Note that DSP mode A is compatible with DSP mode B with +inverted LRC, and vice versa. + + +Left Justified, inverted BCLK +-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .- + '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' + .-------------------------------. .----- +---' '-------------------------------' +---.---.---.---.---.---.---.---.---.---.---.---.---.---.---.---.---.---.- + |MSB| |...| |LSB| X |...| X |MSB| |...| |LSB| X |...| X | | +---'---'---'---'---'---'---'---'---'---'---'---'---'---'---'---'---'---'- + | Left channel | Right channel | + + +Left Justified, inverted LRC + .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. +-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '-' '- +---. .-------------------------------. + '-------------------------------' '----- +---.---.---.---.---.---.---.---.---.---.---.---.---.---.---.---.---.---.- + |MSB| |...| |LSB| X |...| X |MSB| |...| |LSB| X |...| X | | +---'---'---'---'---'---'---'---'---'---'---'---'---'---'---'---'---'---'- + | Left channel | Right channel |
On Tue, Apr 19, 2016 at 12:11:28PM +0200, Peter Rosin wrote:
+I2S
+LRC should have its flanks synchronized with a negative flank of BCLK. +The left channel word starts one BCLK cycle after a negative flank of LRC, and
Clock edges are normally referred to as such and have rising and falling edges, please don't invent new terminology. In general this is using really strange language which makes it hard to follow. Note also that except for modes where clocks need to be exactly synchronized like left justified the important thing is usually when the data can be sampled. It takes time for changes to propagate so there's a distinction between setting a state and when the state is looked at.
+if LRC is not matching the word size. Also, see +https://www.sparkfun.com/datasheets/BreakoutBoards/I2SBUS.pdf
Please make it clear that this is the official spec (there must be a better link for it, this was literally the first hit on Google).
+Left Justified (aka MSB)
+LRC should have its flanks synchronized with a negative flank of BCLK. +The left channel word starts directly after a positive flank of LRC, and the +right channel word starts directly after a negative flank of LRC. The words
This is unclear - what does "directly after" mean? Is it the clock after or do you mean that the data signal needs to change at the same time as the falling edge of the LRCLK? It should be the latter.
+start with the MSB. Receivers must truncate words if more bits per word are +transmitted than they can use, and transmitters must pad words with zeros if +LRC is not matching the word size.
Neither of these is really true, both things are undefined behaviour (this is how TDM works). Transmitters can send anything or tristate and it doesn't make much practical difference what happens on the recieve side unless there's TDM.
+Right Justified (aka LSB)
+LRC should have its flanks synchronized with a negative flank of BCLK. +The left channel word end right before a negative flank of LRC, and the right
Again, this is unclear - what is "right before"? The final bit needs to be sent on the BCLK edge preceeding the LRCLK transition.
+DSP mode A
+LRC should have positive flanks synchronized with a negative flank of BCLK.
LRCLK needs to rise before BCLK, it's good to do it on the preceeding falling edge such that the timing is as relaxed as possible for the reciever but not 100% a requirement.
+The left channel word starts one BCLK after a positive flank of LRC, and the
It can be sampled...
+right channel word starts directly after the left channel word. The words +start with MSB.
This isn't a stereo format, there can be any number of channels.
participants (2)
-
Mark Brown -
Peter Rosin