[alsa-devel] [PATCH] ASoC: fsl: p1022ds: tell the WM8776 codec driver that it's the master
The WM8776 codec driver requires the machine driver to set one of the SND_SOC_DAIFMT_CBx_xxx values. The P1022DS machine driver should be setting SND_SOC_DAIFMT_CBM_CFM, but since that value was zero, no one noticed.
Commit 75d9ac46 ("ASoC: Allow DAI formats to be specified in the dai_link"), however, changed the value of SND_SOC_DAIFMT_CBM_CFM from zero to a non-zero value, which means that it now needs to be specifically set by the machine driver.
We also set SND_SOC_DAIFMT_NB_NF, for the same reason.
Signed-off-by: Timur Tabi timur@freescale.com ---
This patch should be applied on top of Shawn's patchset "[PATCH v5] ASoC: add imx-sgtl5000 machine driver working with fsl_ssi", but it may also need to be back-ported to kernel 3.3.
sound/soc/fsl/p1022_ds.c | 24 ++++++++++++++++-------- 1 file changed, 16 insertions(+), 8 deletions(-)
diff --git a/sound/soc/fsl/p1022_ds.c b/sound/soc/fsl/p1022_ds.c index 0f42f31..2022985 100644 --- a/sound/soc/fsl/p1022_ds.c +++ b/sound/soc/fsl/p1022_ds.c @@ -255,7 +255,8 @@ static int p1022_ds_probe(struct platform_device *pdev) }
if (strcasecmp(sprop, "i2s-slave") == 0) { - mdata->dai_format = SND_SOC_DAIFMT_I2S; + mdata->dai_format = SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM; mdata->codec_clk_direction = SND_SOC_CLOCK_OUT; mdata->cpu_clk_direction = SND_SOC_CLOCK_IN;
@@ -272,31 +273,38 @@ static int p1022_ds_probe(struct platform_device *pdev) } mdata->clk_frequency = be32_to_cpup(iprop); } else if (strcasecmp(sprop, "i2s-master") == 0) { - mdata->dai_format = SND_SOC_DAIFMT_I2S; + mdata->dai_format = SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS; mdata->codec_clk_direction = SND_SOC_CLOCK_IN; mdata->cpu_clk_direction = SND_SOC_CLOCK_OUT; } else if (strcasecmp(sprop, "lj-slave") == 0) { - mdata->dai_format = SND_SOC_DAIFMT_LEFT_J; + mdata->dai_format = SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBM_CFM; mdata->codec_clk_direction = SND_SOC_CLOCK_OUT; mdata->cpu_clk_direction = SND_SOC_CLOCK_IN; } else if (strcasecmp(sprop, "lj-master") == 0) { - mdata->dai_format = SND_SOC_DAIFMT_LEFT_J; + mdata->dai_format = SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBS_CFS; mdata->codec_clk_direction = SND_SOC_CLOCK_IN; mdata->cpu_clk_direction = SND_SOC_CLOCK_OUT; } else if (strcasecmp(sprop, "rj-slave") == 0) { - mdata->dai_format = SND_SOC_DAIFMT_RIGHT_J; + mdata->dai_format = SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_RIGHT_J | SND_SOC_DAIFMT_CBM_CFM; mdata->codec_clk_direction = SND_SOC_CLOCK_OUT; mdata->cpu_clk_direction = SND_SOC_CLOCK_IN; } else if (strcasecmp(sprop, "rj-master") == 0) { - mdata->dai_format = SND_SOC_DAIFMT_RIGHT_J; + mdata->dai_format = SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_RIGHT_J | SND_SOC_DAIFMT_CBS_CFS; mdata->codec_clk_direction = SND_SOC_CLOCK_IN; mdata->cpu_clk_direction = SND_SOC_CLOCK_OUT; } else if (strcasecmp(sprop, "ac97-slave") == 0) { - mdata->dai_format = SND_SOC_DAIFMT_AC97; + mdata->dai_format = SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_AC97 | SND_SOC_DAIFMT_CBM_CFM; mdata->codec_clk_direction = SND_SOC_CLOCK_OUT; mdata->cpu_clk_direction = SND_SOC_CLOCK_IN; } else if (strcasecmp(sprop, "ac97-master") == 0) { - mdata->dai_format = SND_SOC_DAIFMT_AC97; + mdata->dai_format = SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_AC97 | SND_SOC_DAIFMT_CBS_CFS; mdata->codec_clk_direction = SND_SOC_CLOCK_IN; mdata->cpu_clk_direction = SND_SOC_CLOCK_OUT; } else {
On Fri, Mar 16, 2012 at 04:32:52PM -0500, Timur Tabi wrote:
The WM8776 codec driver requires the machine driver to set one of the SND_SOC_DAIFMT_CBx_xxx values. The P1022DS machine driver should be setting SND_SOC_DAIFMT_CBM_CFM, but since that value was zero, no one noticed.
Applied, thanks.
participants (2)
-
Mark Brown
-
Timur Tabi