[PATCH 0/2] sound: fix USB message timeouts
A number of drivers throughout the tree were incorrectly specifying USB message timeout values in jiffies instead of milliseconds.
This series fixes the two sound drivers that got it wrong.
Johan
Johan Hovold (2): sound: 6fire: fix control and bulk message timeouts sound: line6: fix control and interrupt message timeouts
sound/usb/6fire/comm.c | 2 +- sound/usb/6fire/firmware.c | 6 +++--- sound/usb/line6/driver.c | 14 +++++++------- sound/usb/line6/driver.h | 2 +- sound/usb/line6/podhd.c | 6 +++--- sound/usb/line6/toneport.c | 2 +- 6 files changed, 16 insertions(+), 16 deletions(-)
USB control and bulk message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ.
Fixes: c6d43ba816d1 ("ALSA: usb/6fire - Driver for TerraTec DMX 6Fire USB") Cc: stable@vger.kernel.org # 2.6.39 Signed-off-by: Johan Hovold johan@kernel.org --- sound/usb/6fire/comm.c | 2 +- sound/usb/6fire/firmware.c | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/sound/usb/6fire/comm.c b/sound/usb/6fire/comm.c index 43a2a62d66f7..49629d4bb327 100644 --- a/sound/usb/6fire/comm.c +++ b/sound/usb/6fire/comm.c @@ -95,7 +95,7 @@ static int usb6fire_comm_send_buffer(u8 *buffer, struct usb_device *dev) int actual_len;
ret = usb_interrupt_msg(dev, usb_sndintpipe(dev, COMM_EP), - buffer, buffer[1] + 2, &actual_len, HZ); + buffer, buffer[1] + 2, &actual_len, 1000); if (ret < 0) return ret; else if (actual_len != buffer[1] + 2) diff --git a/sound/usb/6fire/firmware.c b/sound/usb/6fire/firmware.c index 8981e61f2da4..c51abc54d2f8 100644 --- a/sound/usb/6fire/firmware.c +++ b/sound/usb/6fire/firmware.c @@ -160,7 +160,7 @@ static int usb6fire_fw_ezusb_write(struct usb_device *device, { return usb_control_msg_send(device, 0, type, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - value, 0, data, len, HZ, GFP_KERNEL); + value, 0, data, len, 1000, GFP_KERNEL); }
static int usb6fire_fw_ezusb_read(struct usb_device *device, @@ -168,7 +168,7 @@ static int usb6fire_fw_ezusb_read(struct usb_device *device, { return usb_control_msg_recv(device, 0, type, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - value, 0, data, len, HZ, GFP_KERNEL); + value, 0, data, len, 1000, GFP_KERNEL); }
static int usb6fire_fw_fpga_write(struct usb_device *device, @@ -178,7 +178,7 @@ static int usb6fire_fw_fpga_write(struct usb_device *device, int ret;
ret = usb_bulk_msg(device, usb_sndbulkpipe(device, FPGA_EP), data, len, - &actual_len, HZ); + &actual_len, 1000); if (ret < 0) return ret; else if (actual_len != len)
USB control and interrupt message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ.
Fixes: 705ececd1c60 ("Staging: add line6 usb driver") Cc: stable@vger.kernel.org # 2.6.30 Signed-off-by: Johan Hovold johan@kernel.org --- sound/usb/line6/driver.c | 14 +++++++------- sound/usb/line6/driver.h | 2 +- sound/usb/line6/podhd.c | 6 +++--- sound/usb/line6/toneport.c | 2 +- 4 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/sound/usb/line6/driver.c b/sound/usb/line6/driver.c index 9602929b7de9..59faa5a9a714 100644 --- a/sound/usb/line6/driver.c +++ b/sound/usb/line6/driver.c @@ -113,12 +113,12 @@ int line6_send_raw_message(struct usb_line6 *line6, const char *buffer, retval = usb_interrupt_msg(line6->usbdev, usb_sndintpipe(line6->usbdev, properties->ep_ctrl_w), (char *)frag_buf, frag_size, - &partial, LINE6_TIMEOUT * HZ); + &partial, LINE6_TIMEOUT); } else { retval = usb_bulk_msg(line6->usbdev, usb_sndbulkpipe(line6->usbdev, properties->ep_ctrl_w), (char *)frag_buf, frag_size, - &partial, LINE6_TIMEOUT * HZ); + &partial, LINE6_TIMEOUT); }
if (retval) { @@ -347,7 +347,7 @@ int line6_read_data(struct usb_line6 *line6, unsigned address, void *data, ret = usb_control_msg_send(usbdev, 0, 0x67, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, (datalen << 8) | 0x21, address, NULL, 0, - LINE6_TIMEOUT * HZ, GFP_KERNEL); + LINE6_TIMEOUT, GFP_KERNEL); if (ret) { dev_err(line6->ifcdev, "read request failed (error %d)\n", ret); goto exit; @@ -360,7 +360,7 @@ int line6_read_data(struct usb_line6 *line6, unsigned address, void *data, ret = usb_control_msg_recv(usbdev, 0, 0x67, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, 0x0012, 0x0000, &len, 1, - LINE6_TIMEOUT * HZ, GFP_KERNEL); + LINE6_TIMEOUT, GFP_KERNEL); if (ret) { dev_err(line6->ifcdev, "receive length failed (error %d)\n", ret); @@ -387,7 +387,7 @@ int line6_read_data(struct usb_line6 *line6, unsigned address, void *data, /* receive the result: */ ret = usb_control_msg_recv(usbdev, 0, 0x67, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - 0x0013, 0x0000, data, datalen, LINE6_TIMEOUT * HZ, + 0x0013, 0x0000, data, datalen, LINE6_TIMEOUT, GFP_KERNEL); if (ret) dev_err(line6->ifcdev, "read failed (error %d)\n", ret); @@ -417,7 +417,7 @@ int line6_write_data(struct usb_line6 *line6, unsigned address, void *data,
ret = usb_control_msg_send(usbdev, 0, 0x67, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, - 0x0022, address, data, datalen, LINE6_TIMEOUT * HZ, + 0x0022, address, data, datalen, LINE6_TIMEOUT, GFP_KERNEL); if (ret) { dev_err(line6->ifcdev, @@ -430,7 +430,7 @@ int line6_write_data(struct usb_line6 *line6, unsigned address, void *data,
ret = usb_control_msg_recv(usbdev, 0, 0x67, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - 0x0012, 0x0000, status, 1, LINE6_TIMEOUT * HZ, + 0x0012, 0x0000, status, 1, LINE6_TIMEOUT, GFP_KERNEL); if (ret) { dev_err(line6->ifcdev, diff --git a/sound/usb/line6/driver.h b/sound/usb/line6/driver.h index 71d3da1db8c8..ecf3a2b39c7e 100644 --- a/sound/usb/line6/driver.h +++ b/sound/usb/line6/driver.h @@ -27,7 +27,7 @@ #define LINE6_FALLBACK_INTERVAL 10 #define LINE6_FALLBACK_MAXPACKETSIZE 16
-#define LINE6_TIMEOUT 1 +#define LINE6_TIMEOUT 1000 #define LINE6_BUFSIZE_LISTEN 64 #define LINE6_MIDI_MESSAGE_MAXLEN 256
diff --git a/sound/usb/line6/podhd.c b/sound/usb/line6/podhd.c index 28794a35949d..b24bc82f89e3 100644 --- a/sound/usb/line6/podhd.c +++ b/sound/usb/line6/podhd.c @@ -190,7 +190,7 @@ static int podhd_dev_start(struct usb_line6_podhd *pod) ret = usb_control_msg_send(usbdev, 0, 0x67, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, 0x11, 0, - NULL, 0, LINE6_TIMEOUT * HZ, GFP_KERNEL); + NULL, 0, LINE6_TIMEOUT, GFP_KERNEL); if (ret) { dev_err(pod->line6.ifcdev, "read request failed (error %d)\n", ret); goto exit; @@ -200,7 +200,7 @@ static int podhd_dev_start(struct usb_line6_podhd *pod) ret = usb_control_msg_recv(usbdev, 0, 0x67, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, 0x11, 0x0, - init_bytes, 3, LINE6_TIMEOUT * HZ, GFP_KERNEL); + init_bytes, 3, LINE6_TIMEOUT, GFP_KERNEL); if (ret) { dev_err(pod->line6.ifcdev, "receive length failed (error %d)\n", ret); @@ -220,7 +220,7 @@ static int podhd_dev_start(struct usb_line6_podhd *pod) USB_REQ_SET_FEATURE, USB_TYPE_STANDARD | USB_RECIP_DEVICE | USB_DIR_OUT, 1, 0, - NULL, 0, LINE6_TIMEOUT * HZ, GFP_KERNEL); + NULL, 0, LINE6_TIMEOUT, GFP_KERNEL); exit: return ret; } diff --git a/sound/usb/line6/toneport.c b/sound/usb/line6/toneport.c index 4e5693c97aa4..e33df58740a9 100644 --- a/sound/usb/line6/toneport.c +++ b/sound/usb/line6/toneport.c @@ -128,7 +128,7 @@ static int toneport_send_cmd(struct usb_device *usbdev, int cmd1, int cmd2)
ret = usb_control_msg_send(usbdev, 0, 0x67, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, - cmd1, cmd2, NULL, 0, LINE6_TIMEOUT * HZ, + cmd1, cmd2, NULL, 0, LINE6_TIMEOUT, GFP_KERNEL);
if (ret) {
On Mon, 25 Oct 2021 14:11:40 +0200, Johan Hovold wrote:
A number of drivers throughout the tree were incorrectly specifying USB message timeout values in jiffies instead of milliseconds.
This series fixes the two sound drivers that got it wrong.
Johan
Johan Hovold (2): sound: 6fire: fix control and bulk message timeouts sound: line6: fix control and interrupt message timeouts
Applied both patches now. Thanks!
Takashi
participants (2)
-
Johan Hovold -
Takashi Iwai