At Wed, 23 Sep 2009 14:13:52 +0300, Simos Xenitellis wrote:

Hi All, I am helping a user with the following hardware,

http://www.alsa-project.org/db/?f=7f926200ee31b5b22222336b9e25bb0e60671a90 (Desktop computer Compaq Evo D510 SFF, with onboard sound card)

lspci -vvc shows: 00:1f.5 0401: 8086:24c5 (rev 01) Subsystem: 0e11:00ad Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium

...

TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

    Latency: 0
    Interrupt: pin B routed to IRQ 17
    Region 0: I/O ports at 2000 [size=256]
    Region 1: I/O ports at 2400 [size=64]
    Region 2: Memory at fc480400 (32-bit, non-prefetchable) [size=512]
    Region 3: Memory at fc480600 (32-bit, non-prefetchable) [size=256]
    Capabilities: [50] Power Management version 2
            Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA

PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: Intel ICH Kernel modules: snd-intel8x0

What does not work:

1. Jack sense. Audio plays on onboard speakers (the computer has

in-built speakers) but does not work with headset.

Try to turn on/off "Headphone Jack Sense" and "Line Jack Sense" mixer switches.

2. Recording. Only a 'Capture' control is shown in the recording tab.

No other controls for recording are available.

This is odd. Try to run "alsamixer -c0".

When trying to record with gnome-sound-recorder, the application hangs, which then kills pulseaudio.

This is rather the application setup issue.

Takashi