The patch

ASoC: rt5640: Add devicetree-bindings for dmic, jack-detect

has been applied to the asoc tree at

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks, Mark

From e9e7a3bdcdf41efe9137dcf225b021e0b6fd2dc3 Mon Sep 17 00:00:00 2001

From: Hans de Goede hdegoede@redhat.com Date: Tue, 8 May 2018 17:35:47 +0200 Subject: [PATCH] ASoC: rt5640: Add devicetree-bindings for dmic, jack-detect

Add devicetree-bindings for the dmic, jack-detect source and overcurrent- detect threshold settings.

The dmic bindings mirror the existing bindings for the rt5645. The jd-src and ovcd bindings mirror the existing bindings for the rt5651.

Cc devicetree@vger.kernel.org Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Mark Brown broonie@kernel.org --- .../devicetree/bindings/sound/rt5640.txt | 35 +++++++++++++++++++ include/dt-bindings/sound/rt5640.h | 25 +++++++++++++ 2 files changed, 60 insertions(+) create mode 100644 include/dt-bindings/sound/rt5640.h

diff --git a/Documentation/devicetree/bindings/sound/rt5640.txt b/Documentation/devicetree/bindings/sound/rt5640.txt index 57fe64643050..e40e4893eed8 100644 --- a/Documentation/devicetree/bindings/sound/rt5640.txt +++ b/Documentation/devicetree/bindings/sound/rt5640.txt @@ -22,6 +22,41 @@ Optional properties:

- realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin.

+- realtek,dmic1-data-pin + 0: dmic1 is not used + 1: using IN1P pin as dmic1 data pin + 2: using GPIO3 pin as dmic1 data pin + +- realtek,dmic2-data-pin + 0: dmic2 is not used + 1: using IN1N pin as dmic2 data pin + 2: using GPIO4 pin as dmic2 data pin + +- realtek,jack-detect-source + u32. Valid values: + 0: jack-detect is not used + 1: Use GPIO1 for jack-detect + 2: Use JD1_IN4P for jack-detect + 3: Use JD2_IN4N for jack-detect + 4: Use GPIO2 for jack-detect + 5: Use GPIO3 for jack-detect + 6: Use GPIO4 for jack-detect + +- realtek,jack-detect-not-inverted + bool. Normal jack-detect switches give an inverted signal, set this bool + in the rare case you've a jack-detect switch which is not inverted. + +- realtek,over-current-threshold-microamp + u32, micbias over-current detection threshold in µA, valid values are + 600, 1500 and 2000µA. + +- realtek,over-current-scale-factor + u32, micbias over-current detection scale-factor, valid values are: + 0: Scale current by 0.5 + 1: Scale current by 0.75 + 2: Scale current by 1.0 + 3: Scale current by 1.5 + Pins on the device (for linking into audio routes) for RT5639/RT5640:

* DMIC1 diff --git a/include/dt-bindings/sound/rt5640.h b/include/dt-bindings/sound/rt5640.h new file mode 100644 index 000000000000..154c9b4414f2 --- /dev/null +++ b/include/dt-bindings/sound/rt5640.h @@ -0,0 +1,25 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __DT_RT5640_H +#define __DT_RT5640_H + +#define RT5640_DMIC1_DATA_PIN_NONE 0 +#define RT5640_DMIC1_DATA_PIN_IN1P 1 +#define RT5640_DMIC1_DATA_PIN_GPIO3 2 + +#define RT5640_DMIC2_DATA_PIN_NONE 0 +#define RT5640_DMIC2_DATA_PIN_IN1N 1 +#define RT5640_DMIC2_DATA_PIN_GPIO4 2 + +#define RT5640_JD_SRC_GPIO1 1 +#define RT5640_JD_SRC_JD1_IN4P 2 +#define RT5640_JD_SRC_JD2_IN4N 3 +#define RT5640_JD_SRC_GPIO2 4 +#define RT5640_JD_SRC_GPIO3 5 +#define RT5640_JD_SRC_GPIO4 6 + +#define RT5640_OVCD_SF_0P5 0 +#define RT5640_OVCD_SF_0P75 1 +#define RT5640_OVCD_SF_1P0 2 +#define RT5640_OVCD_SF_1P5 3 + +#endif /* __DT_RT5640_H */