[PATCH 0/8] ASoC: Intel: avs: New boards and fixes to existing ones
Series adds support for two boards: es8336 and rt5663. The former is utilized by some KBL-based tablets whereas the latter unlocks Chromebooks with rt5663 i2c codecs.
As existing implementation of es8336 (es8316.c) codec driver is not prepared to cope with KBL-based platforms, couple of small, clock-related changes precede anything avs-driver related.
The tail of patchset cleans up existing implementation of rt5682.
Amadeusz Sławiński (2): ASoC: Intel: avs: Add rt5663 machine board ASoC: Intel: avs: Load rt5663 board on KBL-based platforms
Cezary Rojewski (6): ASoC: codecs: es8316: Add support for 24 MHz MCLK ASoC: codecs: es8316: Add support for S24_3LE format ASoC: Intel: avs: Add es8336 machine board ASoC: Intel: avs: Load es8336 board on KBL-based platforms ASoC: Intel: avs: rt5682: Add missing components ASoC: Intel: avs: rt5682: Tidy up hw_params()
sound/soc/codecs/es8316.c | 5 +- sound/soc/intel/avs/board_selection.c | 16 ++ sound/soc/intel/avs/boards/Kconfig | 20 ++ sound/soc/intel/avs/boards/Makefile | 4 + sound/soc/intel/avs/boards/es8336.c | 315 ++++++++++++++++++++++++++ sound/soc/intel/avs/boards/rt5663.c | 254 +++++++++++++++++++++ sound/soc/intel/avs/boards/rt5682.c | 67 +++--- 7 files changed, 652 insertions(+), 29 deletions(-) create mode 100644 sound/soc/intel/avs/boards/es8336.c create mode 100644 sound/soc/intel/avs/boards/rt5663.c
MCLK operates on 24MHz on Intel KabyLake-based platforms. To support that frequency add new MCLK-LRCK ratio.
While at it, utilize ARRAY_SIZE rather than hardcode to improve robustness.
Cc: Zhu Ning zhuning@everest-semi.com Signed-off-by: Cezary Rojewski cezary.rojewski@intel.com --- sound/soc/codecs/es8316.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/es8316.c b/sound/soc/codecs/es8316.c index 34cf60769b62..5d1fd505d6ba 100644 --- a/sound/soc/codecs/es8316.c +++ b/sound/soc/codecs/es8316.c @@ -27,9 +27,9 @@ * MCLK/LRCK ratios, but we also add ratio 400, which is commonly used on * Intel Cherry Trail platforms (19.2MHz MCLK, 48kHz LRCK). */ -#define NR_SUPPORTED_MCLK_LRCK_RATIOS 6 +#define NR_SUPPORTED_MCLK_LRCK_RATIOS ARRAY_SIZE(supported_mclk_lrck_ratios) static const unsigned int supported_mclk_lrck_ratios[] = { - 256, 384, 400, 512, 768, 1024 + 256, 384, 400, 500, 512, 768, 1024 };
struct es8316_priv {
Codec supports words that are 16/18/20/24/32 bits long. In case of 24, it should be treated as 24/24 not 24/32 i.e.: 24 valid bit-depth in 24 bit-depth container.
For compatibility reasons, S24_LE is left as is.
Cc: Zhu Ning zhuning@everest-semi.com Signed-off-by: Cezary Rojewski cezary.rojewski@intel.com --- sound/soc/codecs/es8316.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/sound/soc/codecs/es8316.c b/sound/soc/codecs/es8316.c index 5d1fd505d6ba..7e5eb13af428 100644 --- a/sound/soc/codecs/es8316.c +++ b/sound/soc/codecs/es8316.c @@ -494,6 +494,7 @@ static int es8316_pcm_hw_params(struct snd_pcm_substream *substream, bclk_divider /= 20; break; case SNDRV_PCM_FORMAT_S24_LE: + case SNDRV_PCM_FORMAT_S24_3LE: wordlen = ES8316_SERDATA2_LEN_24; bclk_divider /= 24; break;
To support AVS-es8336 configuration add machine board connecting AVS platform component driver with es8316 codec one.
Signed-off-by: Cezary Rojewski cezary.rojewski@intel.com --- sound/soc/intel/avs/boards/Kconfig | 10 + sound/soc/intel/avs/boards/Makefile | 2 + sound/soc/intel/avs/boards/es8336.c | 315 ++++++++++++++++++++++++++++ 3 files changed, 327 insertions(+) create mode 100644 sound/soc/intel/avs/boards/es8336.c
diff --git a/sound/soc/intel/avs/boards/Kconfig b/sound/soc/intel/avs/boards/Kconfig index e4c230efe8d7..cb07498d779e 100644 --- a/sound/soc/intel/avs/boards/Kconfig +++ b/sound/soc/intel/avs/boards/Kconfig @@ -22,6 +22,16 @@ config SND_SOC_INTEL_AVS_MACH_DMIC Say Y or m if you have such a device. This is a recommended option. If unsure select "N".
+config SND_SOC_INTEL_AVS_MACH_ES8336 + tristate "es8336 I2S board" + depends on X86 && I2C + depends on MFD_INTEL_LPSS || COMPILE_TEST + select SND_SOC_ES8316 + help + This adds support for AVS with ES8336 I2S codec configuration. + Say Y or m if you have such a device. This is a recommended option. + If unsure select "N". + config SND_SOC_INTEL_AVS_MACH_HDAUDIO tristate "HD-Audio generic board" select SND_SOC_HDA diff --git a/sound/soc/intel/avs/boards/Makefile b/sound/soc/intel/avs/boards/Makefile index b81343420370..a1c08c0cb170 100644 --- a/sound/soc/intel/avs/boards/Makefile +++ b/sound/soc/intel/avs/boards/Makefile @@ -2,6 +2,7 @@
snd-soc-avs-da7219-objs := da7219.o snd-soc-avs-dmic-objs := dmic.o +snd-soc-avs-es8336-objs := es8336.o snd-soc-avs-hdaudio-objs := hdaudio.o snd-soc-avs-i2s-test-objs := i2s_test.o snd-soc-avs-max98927-objs := max98927.o @@ -17,6 +18,7 @@ snd-soc-avs-ssm4567-objs := ssm4567.o
obj-$(CONFIG_SND_SOC_INTEL_AVS_MACH_DA7219) += snd-soc-avs-da7219.o obj-$(CONFIG_SND_SOC_INTEL_AVS_MACH_DMIC) += snd-soc-avs-dmic.o +obj-$(CONFIG_SND_SOC_INTEL_AVS_MACH_ES8336) += snd-soc-avs-es8336.o obj-$(CONFIG_SND_SOC_INTEL_AVS_MACH_HDAUDIO) += snd-soc-avs-hdaudio.o obj-$(CONFIG_SND_SOC_INTEL_AVS_MACH_I2S_TEST) += snd-soc-avs-i2s-test.o obj-$(CONFIG_SND_SOC_INTEL_AVS_MACH_MAX98927) += snd-soc-avs-max98927.o diff --git a/sound/soc/intel/avs/boards/es8336.c b/sound/soc/intel/avs/boards/es8336.c new file mode 100644 index 000000000000..0a023f871d93 --- /dev/null +++ b/sound/soc/intel/avs/boards/es8336.c @@ -0,0 +1,315 @@ +// SPDX-License-Identifier: GPL-2.0-only +// +// Copyright(c) 2023 Intel Corporation. All rights reserved. +// +// Authors: Cezary Rojewski cezary.rojewski@intel.com +// Amadeusz Slawinski amadeuszx.slawinski@linux.intel.com +// + +#include <linux/device.h> +#include <linux/gpio/consumer.h> +#include <linux/input.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/processor.h> +#include <linux/slab.h> +#include <sound/jack.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-acpi.h> +#include <asm/intel-family.h> + +#define ES8336_CODEC_DAI "ES8316 HiFi" + +struct avs_card_drvdata { + struct snd_soc_jack jack; + struct gpio_desc *gpiod; +}; + +static const struct acpi_gpio_params enable_gpio = { 0, 0, true }; + +static const struct acpi_gpio_mapping speaker_gpios[] = { + { "speaker-enable-gpios", &enable_gpio, 1, ACPI_GPIO_QUIRK_ONLY_GPIOIO }, + { } +}; + +static int avs_es8336_speaker_power_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_card *card = w->dapm->card; + struct avs_card_drvdata *data; + bool speaker_en; + + data = snd_soc_card_get_drvdata(card); + /* As enable_gpio has active_low=true, logic is inverted. */ + speaker_en = !SND_SOC_DAPM_EVENT_ON(event); + + gpiod_set_value_cansleep(data->gpiod, speaker_en); + return 0; +} + +static const struct snd_soc_dapm_widget card_widgets[] = { + SND_SOC_DAPM_SPK("Speaker", NULL), + SND_SOC_DAPM_HP("Headphone", NULL), + SND_SOC_DAPM_MIC("Headset Mic", NULL), + SND_SOC_DAPM_MIC("Internal Mic", NULL), + + SND_SOC_DAPM_SUPPLY("Speaker Power", SND_SOC_NOPM, 0, 0, + avs_es8336_speaker_power_event, + SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMU), +}; + +static const struct snd_soc_dapm_route card_routes[] = { + {"Headphone", NULL, "HPOL"}, + {"Headphone", NULL, "HPOR"}, + + /* + * There is no separate speaker output instead the speakers are muxed to + * the HP outputs. The mux is controlled by the "Speaker Power" widget. + */ + {"Speaker", NULL, "HPOL"}, + {"Speaker", NULL, "HPOR"}, + {"Speaker", NULL, "Speaker Power"}, + + /* Mic route map */ + {"MIC1", NULL, "Internal Mic"}, + {"MIC2", NULL, "Headset Mic"}, +}; + +static const struct snd_kcontrol_new card_controls[] = { + SOC_DAPM_PIN_SWITCH("Speaker"), + SOC_DAPM_PIN_SWITCH("Headphone"), + SOC_DAPM_PIN_SWITCH("Headset Mic"), + SOC_DAPM_PIN_SWITCH("Internal Mic"), +}; + +static struct snd_soc_jack_pin card_headset_pins[] = { + { + .pin = "Headphone", + .mask = SND_JACK_HEADPHONE, + }, + { + .pin = "Headset Mic", + .mask = SND_JACK_MICROPHONE, + }, +}; + +static int avs_es8336_codec_init(struct snd_soc_pcm_runtime *runtime) +{ + struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(runtime, 0); + struct snd_soc_component *component = codec_dai->component; + struct snd_soc_card *card = runtime->card; + struct snd_soc_jack_pin *pins; + struct avs_card_drvdata *data; + struct gpio_desc *gpiod; + int num_pins, ret; + + data = snd_soc_card_get_drvdata(card); + num_pins = ARRAY_SIZE(card_headset_pins); + + pins = devm_kmemdup(card->dev, card_headset_pins, sizeof(*pins) * num_pins, GFP_KERNEL); + if (!pins) + return -ENOMEM; + + ret = snd_soc_card_jack_new_pins(card, "Headset", SND_JACK_HEADSET | SND_JACK_BTN_0, + &data->jack, pins, num_pins); + if (ret) + return ret; + + ret = devm_acpi_dev_add_driver_gpios(codec_dai->dev, speaker_gpios); + if (ret) + dev_warn(codec_dai->dev, "Unable to add GPIO mapping table\n"); + + gpiod = gpiod_get_optional(codec_dai->dev, "speaker-enable", GPIOD_OUT_LOW); + if (IS_ERR(gpiod)) + return dev_err_probe(codec_dai->dev, PTR_ERR(gpiod), "Get gpiod failed: %ld\n", + PTR_ERR(gpiod)); + + data->gpiod = gpiod; + snd_jack_set_key(data->jack.jack, SND_JACK_BTN_0, KEY_PLAYPAUSE); + snd_soc_component_set_jack(component, &data->jack, NULL); + + card->dapm.idle_bias_off = true; + + return 0; +} + +static void avs_es8336_codec_exit(struct snd_soc_pcm_runtime *runtime) +{ + struct avs_card_drvdata *data = snd_soc_card_get_drvdata(runtime->card); + struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(runtime, 0); + + snd_soc_component_set_jack(codec_dai->component, NULL, NULL); + gpiod_put(data->gpiod); +} + +static int avs_es8336_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *runtime = asoc_substream_to_rtd(substream); + struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(runtime, 0); + int clk_freq; + int ret; + + switch (boot_cpu_data.x86_model) { + case INTEL_FAM6_KABYLAKE_L: + case INTEL_FAM6_KABYLAKE: + clk_freq = 24000000; + break; + default: + clk_freq = 19200000; + break; + } + + ret = snd_soc_dai_set_sysclk(codec_dai, 1, clk_freq, SND_SOC_CLOCK_OUT); + if (ret < 0) + dev_err(runtime->dev, "Set codec sysclk failed: %d\n", ret); + + return ret; +} + +static const struct snd_soc_ops avs_es8336_ops = { + .hw_params = avs_es8336_hw_params, +}; + +static int avs_es8336_be_fixup(struct snd_soc_pcm_runtime *runtime, + struct snd_pcm_hw_params *params) +{ + struct snd_interval *rate, *channels; + struct snd_mask *fmt; + + rate = hw_param_interval(params, SNDRV_PCM_HW_PARAM_RATE); + channels = hw_param_interval(params, SNDRV_PCM_HW_PARAM_CHANNELS); + fmt = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT); + + /* The ADSP will convert the FE rate to 48k, stereo */ + rate->min = rate->max = 48000; + channels->min = channels->max = 2; + + /* set SSPN to 24 bit */ + snd_mask_none(fmt); + snd_mask_set_format(fmt, SNDRV_PCM_FORMAT_S24_3LE); + + return 0; +} +static int avs_create_dai_link(struct device *dev, const char *platform_name, int ssp_port, + struct snd_soc_dai_link **dai_link) +{ + struct snd_soc_dai_link_component *platform; + struct snd_soc_dai_link *dl; + + dl = devm_kzalloc(dev, sizeof(*dl), GFP_KERNEL); + platform = devm_kzalloc(dev, sizeof(*platform), GFP_KERNEL); + if (!dl || !platform) + return -ENOMEM; + + platform->name = platform_name; + + dl->name = devm_kasprintf(dev, GFP_KERNEL, "SSP%d-Codec", ssp_port); + dl->cpus = devm_kzalloc(dev, sizeof(*dl->cpus), GFP_KERNEL); + dl->codecs = devm_kzalloc(dev, sizeof(*dl->codecs), GFP_KERNEL); + if (!dl->name || !dl->cpus || !dl->codecs) + return -ENOMEM; + + dl->cpus->dai_name = devm_kasprintf(dev, GFP_KERNEL, "SSP%d Pin", ssp_port); + dl->codecs->name = devm_kasprintf(dev, GFP_KERNEL, "i2c-ESSX8336:00"); + dl->codecs->dai_name = devm_kasprintf(dev, GFP_KERNEL, ES8336_CODEC_DAI); + if (!dl->cpus->dai_name || !dl->codecs->name || !dl->codecs->dai_name) + return -ENOMEM; + + dl->num_cpus = 1; + dl->num_codecs = 1; + dl->platforms = platform; + dl->num_platforms = 1; + dl->id = 0; + dl->dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBC_CFC; + dl->init = avs_es8336_codec_init; + dl->exit = avs_es8336_codec_exit; + dl->be_hw_params_fixup = avs_es8336_be_fixup; + dl->ops = &avs_es8336_ops; + dl->nonatomic = 1; + dl->no_pcm = 1; + dl->dpcm_capture = 1; + dl->dpcm_playback = 1; + + *dai_link = dl; + + return 0; +} + +static int avs_card_suspend_pre(struct snd_soc_card *card) +{ + struct snd_soc_dai *codec_dai = snd_soc_card_get_codec_dai(card, ES8336_CODEC_DAI); + + return snd_soc_component_set_jack(codec_dai->component, NULL, NULL); +} + +static int avs_card_resume_post(struct snd_soc_card *card) +{ + struct snd_soc_dai *codec_dai = snd_soc_card_get_codec_dai(card, ES8336_CODEC_DAI); + struct avs_card_drvdata *data = snd_soc_card_get_drvdata(card); + + return snd_soc_component_set_jack(codec_dai->component, &data->jack, NULL); +} + +static int avs_es8336_probe(struct platform_device *pdev) +{ + struct snd_soc_dai_link *dai_link; + struct snd_soc_acpi_mach *mach; + struct avs_card_drvdata *data; + struct snd_soc_card *card; + struct device *dev = &pdev->dev; + const char *pname; + int ssp_port, ret; + + mach = dev_get_platdata(dev); + pname = mach->mach_params.platform; + ssp_port = __ffs(mach->mach_params.i2s_link_mask); + + ret = avs_create_dai_link(dev, pname, ssp_port, &dai_link); + if (ret) { + dev_err(dev, "Failed to create dai link: %d", ret); + return ret; + } + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + card = devm_kzalloc(dev, sizeof(*card), GFP_KERNEL); + if (!data || !card) + return -ENOMEM; + + card->name = "avs_es8336"; + card->dev = dev; + card->owner = THIS_MODULE; + card->suspend_pre = avs_card_suspend_pre; + card->resume_post = avs_card_resume_post; + card->dai_link = dai_link; + card->num_links = 1; + card->controls = card_controls; + card->num_controls = ARRAY_SIZE(card_controls); + card->dapm_widgets = card_widgets; + card->num_dapm_widgets = ARRAY_SIZE(card_widgets); + card->dapm_routes = card_routes; + card->num_dapm_routes = ARRAY_SIZE(card_routes); + card->fully_routed = true; + snd_soc_card_set_drvdata(card, data); + + ret = snd_soc_fixup_dai_links_platform_name(card, pname); + if (ret) + return ret; + + return devm_snd_soc_register_card(dev, card); +} + +static struct platform_driver avs_es8336_driver = { + .probe = avs_es8336_probe, + .driver = { + .name = "avs_es8336", + .pm = &snd_soc_pm_ops, + }, +}; + +module_platform_driver(avs_es8336_driver); + +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:avs_es8336");
Update board-selection tables to account for es8336 on KBL-based platforms.
Signed-off-by: Cezary Rojewski cezary.rojewski@intel.com --- sound/soc/intel/avs/board_selection.c | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/sound/soc/intel/avs/board_selection.c b/sound/soc/intel/avs/board_selection.c index 60f8fb0bff95..5dc55f14b5a3 100644 --- a/sound/soc/intel/avs/board_selection.c +++ b/sound/soc/intel/avs/board_selection.c @@ -159,6 +159,14 @@ static struct snd_soc_acpi_mach avs_kbl_i2s_machines[] = { }, .tplg_filename = "da7219-tplg.bin", }, + { + .id = "ESSX8336", + .drv_name = "avs_es8336", + .mach_params = { + .i2s_link_mask = AVS_SSP(0), + }, + .tplg_filename = "es8336-tplg.bin", + }, {}, };
From: Amadeusz Sławiński amadeuszx.slawinski@linux.intel.com
To support AVS-rt5663 configuration add machine board connecting AVS platform component driver with rt5663 codec one.
Signed-off-by: Amadeusz Sławiński amadeuszx.slawinski@linux.intel.com Signed-off-by: Cezary Rojewski cezary.rojewski@intel.com --- sound/soc/intel/avs/boards/Kconfig | 10 ++ sound/soc/intel/avs/boards/Makefile | 2 + sound/soc/intel/avs/boards/rt5663.c | 254 ++++++++++++++++++++++++++++ 3 files changed, 266 insertions(+) create mode 100644 sound/soc/intel/avs/boards/rt5663.c
diff --git a/sound/soc/intel/avs/boards/Kconfig b/sound/soc/intel/avs/boards/Kconfig index cb07498d779e..07353d37ecae 100644 --- a/sound/soc/intel/avs/boards/Kconfig +++ b/sound/soc/intel/avs/boards/Kconfig @@ -125,6 +125,16 @@ config SND_SOC_INTEL_AVS_MACH_RT298 Say Y or m if you have such a device. This is a recommended option. If unsure select "N".
+config SND_SOC_INTEL_AVS_MACH_RT5663 + tristate "rt5663 in I2S mode" + depends on I2C + depends on MFD_INTEL_LPSS || COMPILE_TEST + select SND_SOC_RT5663 + help + This adds support for ASoC machine driver with RT5663 I2S audio codec. + Say Y or m if you have such a device. This is a recommended option. + If unsure select "N". + config SND_SOC_INTEL_AVS_MACH_RT5682 tristate "rt5682 in I2S mode" depends on I2C diff --git a/sound/soc/intel/avs/boards/Makefile b/sound/soc/intel/avs/boards/Makefile index a1c08c0cb170..34347bcd1e7d 100644 --- a/sound/soc/intel/avs/boards/Makefile +++ b/sound/soc/intel/avs/boards/Makefile @@ -13,6 +13,7 @@ snd-soc-avs-probe-objs := probe.o snd-soc-avs-rt274-objs := rt274.o snd-soc-avs-rt286-objs := rt286.o snd-soc-avs-rt298-objs := rt298.o +snd-soc-avs-rt5663-objs := rt5663.o snd-soc-avs-rt5682-objs := rt5682.o snd-soc-avs-ssm4567-objs := ssm4567.o
@@ -29,5 +30,6 @@ obj-$(CONFIG_SND_SOC_INTEL_AVS_MACH_PROBE) += snd-soc-avs-probe.o obj-$(CONFIG_SND_SOC_INTEL_AVS_MACH_RT274) += snd-soc-avs-rt274.o obj-$(CONFIG_SND_SOC_INTEL_AVS_MACH_RT286) += snd-soc-avs-rt286.o obj-$(CONFIG_SND_SOC_INTEL_AVS_MACH_RT298) += snd-soc-avs-rt298.o +obj-$(CONFIG_SND_SOC_INTEL_AVS_MACH_RT5663) += snd-soc-avs-rt5663.o obj-$(CONFIG_SND_SOC_INTEL_AVS_MACH_RT5682) += snd-soc-avs-rt5682.o obj-$(CONFIG_SND_SOC_INTEL_AVS_MACH_SSM4567) += snd-soc-avs-ssm4567.o diff --git a/sound/soc/intel/avs/boards/rt5663.c b/sound/soc/intel/avs/boards/rt5663.c new file mode 100644 index 000000000000..770b36d05bf4 --- /dev/null +++ b/sound/soc/intel/avs/boards/rt5663.c @@ -0,0 +1,254 @@ +// SPDX-License-Identifier: GPL-2.0-only +// +// Copyright(c) 2022-2023 Intel Corporation. All rights reserved. +// +// Authors: Cezary Rojewski cezary.rojewski@intel.com +// Amadeusz Slawinski amadeuszx.slawinski@linux.intel.com +// + +#include <linux/clk.h> +#include <linux/input.h> +#include <linux/module.h> +#include <sound/jack.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-acpi.h> +#include "../../../codecs/rt5663.h" + +#define RT5663_CODEC_DAI "rt5663-aif" + +struct rt5663_private { + struct snd_soc_jack jack; +}; + +static const struct snd_kcontrol_new card_controls[] = { + SOC_DAPM_PIN_SWITCH("Headphone Jack"), + SOC_DAPM_PIN_SWITCH("Headset Mic"), +}; + +static const struct snd_soc_dapm_widget card_widgets[] = { + SND_SOC_DAPM_HP("Headphone Jack", NULL), + SND_SOC_DAPM_MIC("Headset Mic", NULL), +}; + +static const struct snd_soc_dapm_route card_routes[] = { + /* HP jack connectors */ + { "Headphone Jack", NULL, "HPOL" }, + { "Headphone Jack", NULL, "HPOR" }, + + /* Mic jacks */ + { "IN1P", NULL, "Headset Mic" }, + { "IN1N", NULL, "Headset Mic" }, +}; + +static struct snd_soc_jack_pin card_headset_pins[] = { + { + .pin = "Headphone Jack", + .mask = SND_JACK_HEADPHONE, + }, + { + .pin = "Headset Mic", + .mask = SND_JACK_MICROPHONE, + }, +}; + +static int avs_rt5663_codec_init(struct snd_soc_pcm_runtime *runtime) +{ + struct snd_soc_card *card = runtime->card; + struct rt5663_private *priv = snd_soc_card_get_drvdata(card); + struct snd_soc_jack_pin *pins; + struct snd_soc_jack *jack; + int num_pins, ret; + + jack = &priv->jack; + num_pins = ARRAY_SIZE(card_headset_pins); + + pins = devm_kmemdup(card->dev, card_headset_pins, sizeof(*pins) * num_pins, GFP_KERNEL); + if (!pins) + return -ENOMEM; + + ret = snd_soc_card_jack_new_pins(card, "Headset Jack", SND_JACK_HEADSET | SND_JACK_BTN_0 | + SND_JACK_BTN_1 | SND_JACK_BTN_2 | SND_JACK_BTN_3, jack, + pins, num_pins); + if (ret) + return ret; + + snd_jack_set_key(jack->jack, SND_JACK_BTN_0, KEY_PLAYPAUSE); + snd_jack_set_key(jack->jack, SND_JACK_BTN_1, KEY_VOICECOMMAND); + snd_jack_set_key(jack->jack, SND_JACK_BTN_2, KEY_VOLUMEUP); + snd_jack_set_key(jack->jack, SND_JACK_BTN_3, KEY_VOLUMEDOWN); + + snd_soc_component_set_jack(asoc_rtd_to_codec(runtime, 0)->component, jack, NULL); + + return 0; +} + +static void avs_rt5663_codec_exit(struct snd_soc_pcm_runtime *runtime) +{ + snd_soc_component_set_jack(asoc_rtd_to_codec(runtime, 0)->component, NULL, NULL); +} + +static int +avs_rt5663_be_fixup(struct snd_soc_pcm_runtime *runtime, struct snd_pcm_hw_params *params) +{ + struct snd_interval *rate, *channels; + struct snd_mask *fmt; + + rate = hw_param_interval(params, SNDRV_PCM_HW_PARAM_RATE); + channels = hw_param_interval(params, SNDRV_PCM_HW_PARAM_CHANNELS); + fmt = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT); + + /* The ADSP will convert the FE rate to 48k, stereo */ + rate->min = rate->max = 48000; + channels->min = channels->max = 2; + + /* set SSPN to 24 bit */ + snd_mask_none(fmt); + snd_mask_set_format(fmt, SNDRV_PCM_FORMAT_S24_LE); + + return 0; +} + +static int avs_rt5663_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream); + struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0); + int ret; + + /* use ASRC for internal clocks, as PLL rate isn't multiple of BCLK */ + rt5663_sel_asrc_clk_src(codec_dai->component, + RT5663_DA_STEREO_FILTER | RT5663_AD_STEREO_FILTER, + RT5663_CLK_SEL_I2S1_ASRC); + + ret = snd_soc_dai_set_sysclk(codec_dai, RT5663_SCLK_S_MCLK, 24576000, SND_SOC_CLOCK_IN); + + return ret; +} + +static const struct snd_soc_ops avs_rt5663_ops = { + .hw_params = avs_rt5663_hw_params, +}; + + +static int avs_create_dai_link(struct device *dev, const char *platform_name, int ssp_port, + struct snd_soc_dai_link **dai_link) +{ + struct snd_soc_dai_link_component *platform; + struct snd_soc_dai_link *dl; + + dl = devm_kzalloc(dev, sizeof(*dl), GFP_KERNEL); + platform = devm_kzalloc(dev, sizeof(*platform), GFP_KERNEL); + if (!dl || !platform) + return -ENOMEM; + + platform->name = platform_name; + + dl->name = devm_kasprintf(dev, GFP_KERNEL, "SSP%d-Codec", ssp_port); + dl->cpus = devm_kzalloc(dev, sizeof(*dl->cpus), GFP_KERNEL); + dl->codecs = devm_kzalloc(dev, sizeof(*dl->codecs), GFP_KERNEL); + if (!dl->name || !dl->cpus || !dl->codecs) + return -ENOMEM; + + dl->cpus->dai_name = devm_kasprintf(dev, GFP_KERNEL, "SSP%d Pin", ssp_port); + dl->codecs->name = devm_kasprintf(dev, GFP_KERNEL, "i2c-10EC5663:00"); + dl->codecs->dai_name = devm_kasprintf(dev, GFP_KERNEL, RT5663_CODEC_DAI); + if (!dl->cpus->dai_name || !dl->codecs->name || !dl->codecs->dai_name) + return -ENOMEM; + + dl->num_cpus = 1; + dl->num_codecs = 1; + dl->platforms = platform; + dl->num_platforms = 1; + dl->id = 0; + dl->dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBC_CFC; + dl->init = avs_rt5663_codec_init; + dl->exit = avs_rt5663_codec_exit; + dl->be_hw_params_fixup = avs_rt5663_be_fixup; + dl->nonatomic = 1; + dl->no_pcm = 1; + dl->dpcm_capture = 1; + dl->dpcm_playback = 1; + dl->ops = &avs_rt5663_ops; + + *dai_link = dl; + + return 0; +} + +static int avs_card_suspend_pre(struct snd_soc_card *card) +{ + struct snd_soc_dai *codec_dai = snd_soc_card_get_codec_dai(card, RT5663_CODEC_DAI); + + return snd_soc_component_set_jack(codec_dai->component, NULL, NULL); +} + +static int avs_card_resume_post(struct snd_soc_card *card) +{ + struct snd_soc_dai *codec_dai = snd_soc_card_get_codec_dai(card, RT5663_CODEC_DAI); + struct snd_soc_jack *jack = snd_soc_card_get_drvdata(card); + + return snd_soc_component_set_jack(codec_dai->component, jack, NULL); +} + +static int avs_rt5663_probe(struct platform_device *pdev) +{ + struct snd_soc_dai_link *dai_link; + struct snd_soc_acpi_mach *mach; + struct snd_soc_card *card; + struct rt5663_private *priv; + struct device *dev = &pdev->dev; + const char *pname; + int ssp_port, ret; + + mach = dev_get_platdata(dev); + pname = mach->mach_params.platform; + ssp_port = __ffs(mach->mach_params.i2s_link_mask); + + ret = avs_create_dai_link(dev, pname, ssp_port, &dai_link); + if (ret) { + dev_err(dev, "Failed to create dai link: %d", ret); + return ret; + } + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + card = devm_kzalloc(dev, sizeof(*card), GFP_KERNEL); + if (!priv || !card) + return -ENOMEM; + + card->name = "avs_rt5663"; + card->dev = dev; + card->owner = THIS_MODULE; + card->suspend_pre = avs_card_suspend_pre; + card->resume_post = avs_card_resume_post; + card->dai_link = dai_link; + card->num_links = 1; + card->controls = card_controls; + card->num_controls = ARRAY_SIZE(card_controls); + card->dapm_widgets = card_widgets; + card->num_dapm_widgets = ARRAY_SIZE(card_widgets); + card->dapm_routes = card_routes; + card->num_dapm_routes = ARRAY_SIZE(card_routes); + card->fully_routed = true; + snd_soc_card_set_drvdata(card, priv); + + ret = snd_soc_fixup_dai_links_platform_name(card, pname); + if (ret) + return ret; + + return devm_snd_soc_register_card(dev, card); +} + +static struct platform_driver avs_rt5663_driver = { + .probe = avs_rt5663_probe, + .driver = { + .name = "avs_rt5663", + .pm = &snd_soc_pm_ops, + }, +}; + +module_platform_driver(avs_rt5663_driver); + +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:avs_rt5663");
From: Amadeusz Sławiński amadeuszx.slawinski@linux.intel.com
Update board-selection tables to account for rt5663 on KBL-based platforms.
Signed-off-by: Amadeusz Sławiński amadeuszx.slawinski@linux.intel.com Signed-off-by: Cezary Rojewski cezary.rojewski@intel.com --- sound/soc/intel/avs/board_selection.c | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/sound/soc/intel/avs/board_selection.c b/sound/soc/intel/avs/board_selection.c index 5dc55f14b5a3..f91ef6c9612f 100644 --- a/sound/soc/intel/avs/board_selection.c +++ b/sound/soc/intel/avs/board_selection.c @@ -135,6 +135,14 @@ static struct snd_soc_acpi_mach avs_kbl_i2s_machines[] = { }, .tplg_filename = "max98927-tplg.bin", }, + { + .id = "10EC5663", + .drv_name = "avs_rt5663", + .mach_params = { + .i2s_link_mask = AVS_SSP(1), + }, + .tplg_filename = "rt5663-tplg.bin", + }, { .id = "MX98373", .drv_name = "avs_max98373",
Align with what's done for all other boards and allocate jacks pins dynamically and explicitly specify ->dai_fmt for the DAI link.
The latter clears any ambiguity - given the current implementation of the codec driver, specifying format is optional but should the implementation change, the sound card behaviour may be undesired.
Signed-off-by: Cezary Rojewski cezary.rojewski@intel.com --- sound/soc/intel/avs/boards/rt5682.c | 32 +++++++++++++++++++++-------- 1 file changed, 24 insertions(+), 8 deletions(-)
diff --git a/sound/soc/intel/avs/boards/rt5682.c b/sound/soc/intel/avs/boards/rt5682.c index 7142a67900bf..bd0902bb5a37 100644 --- a/sound/soc/intel/avs/boards/rt5682.c +++ b/sound/soc/intel/avs/boards/rt5682.c @@ -79,14 +79,31 @@ static const struct snd_soc_dapm_route card_base_routes[] = { { "IN1P", NULL, "Headset Mic" }, };
+static struct snd_soc_jack_pin card_jack_pins[] = { + { + .pin = "Headphone Jack", + .mask = SND_JACK_HEADPHONE, + }, + { + .pin = "Headset Mic", + .mask = SND_JACK_MICROPHONE, + }, +}; + static int avs_rt5682_codec_init(struct snd_soc_pcm_runtime *runtime) { struct snd_soc_component *component = asoc_rtd_to_codec(runtime, 0)->component; - struct snd_soc_jack *jack; struct snd_soc_card *card = runtime->card; - int ret; + struct snd_soc_jack_pin *pins; + struct snd_soc_jack *jack; + int num_pins, ret;
jack = snd_soc_card_get_drvdata(card); + num_pins = ARRAY_SIZE(card_jack_pins); + + pins = devm_kmemdup(card->dev, card_jack_pins, sizeof(*pins) * num_pins, GFP_KERNEL); + if (!pins) + return -ENOMEM;
/* Need to enable ASRC function for 24MHz mclk rate */ if ((avs_rt5682_quirk & AVS_RT5682_MCLK_EN) && @@ -95,12 +112,10 @@ static int avs_rt5682_codec_init(struct snd_soc_pcm_runtime *runtime) RT5682_AD_STEREO1_FILTER, RT5682_CLK_SEL_I2S1_ASRC); }
- /* - * Headset buttons map to the google Reference headset. - * These can be configured by userspace. - */ - ret = snd_soc_card_jack_new(card, "Headset", SND_JACK_HEADSET | SND_JACK_BTN_0 | - SND_JACK_BTN_1 | SND_JACK_BTN_2 | SND_JACK_BTN_3, jack); + + ret = snd_soc_card_jack_new_pins(card, "Headset Jack", SND_JACK_HEADSET | SND_JACK_BTN_0 | + SND_JACK_BTN_1 | SND_JACK_BTN_2 | SND_JACK_BTN_3, jack, + pins, num_pins); if (ret) { dev_err(card->dev, "Headset Jack creation failed: %d\n", ret); return ret; @@ -220,6 +235,7 @@ static int avs_create_dai_link(struct device *dev, const char *platform_name, in dl->platforms = platform; dl->num_platforms = 1; dl->id = 0; + dl->dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBC_CFC; dl->init = avs_rt5682_codec_init; dl->exit = avs_rt5682_codec_exit; dl->be_hw_params_fixup = avs_rt5682_be_fixup;
To improve readability, reword several local variables to better match their counterparts in declarations of soc-dai.h. For similar reasons, wording for few comments is streamlined while redundant comments are removed.
No functional changes.
Signed-off-by: Cezary Rojewski cezary.rojewski@intel.com --- sound/soc/intel/avs/boards/rt5682.c | 35 +++++++++++++---------------- 1 file changed, 16 insertions(+), 19 deletions(-)
diff --git a/sound/soc/intel/avs/boards/rt5682.c b/sound/soc/intel/avs/boards/rt5682.c index bd0902bb5a37..b93468ae0977 100644 --- a/sound/soc/intel/avs/boards/rt5682.c +++ b/sound/soc/intel/avs/boards/rt5682.c @@ -145,39 +145,36 @@ avs_rt5682_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_para { struct snd_soc_pcm_runtime *runtime = asoc_substream_to_rtd(substream); struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(runtime, 0); - int clk_id, clk_freq; - int pll_out, ret; + int pll_source, freq_in, freq_out; + int ret;
if (avs_rt5682_quirk & AVS_RT5682_MCLK_EN) { - clk_id = RT5682_PLL1_S_MCLK; + pll_source = RT5682_PLL1_S_MCLK; if (avs_rt5682_quirk & AVS_RT5682_MCLK_24MHZ) - clk_freq = 24000000; + freq_in = 24000000; else - clk_freq = 19200000; + freq_in = 19200000; } else { - clk_id = RT5682_PLL1_S_BCLK1; - clk_freq = params_rate(params) * 50; + pll_source = RT5682_PLL1_S_BCLK1; + freq_in = params_rate(params) * 50; }
- pll_out = params_rate(params) * 512; + freq_out = params_rate(params) * 512;
- ret = snd_soc_dai_set_pll(codec_dai, 0, clk_id, clk_freq, pll_out); + ret = snd_soc_dai_set_pll(codec_dai, RT5682_PLL1, pll_source, freq_in, freq_out); if (ret < 0) - dev_err(runtime->dev, "snd_soc_dai_set_pll err = %d\n", ret); + dev_err(runtime->dev, "Set PLL failed: %d\n", ret);
- /* Configure sysclk for codec */ - ret = snd_soc_dai_set_sysclk(codec_dai, RT5682_SCLK_S_PLL1, pll_out, SND_SOC_CLOCK_IN); + ret = snd_soc_dai_set_sysclk(codec_dai, RT5682_SCLK_S_PLL1, freq_out, SND_SOC_CLOCK_IN); if (ret < 0) - dev_err(runtime->dev, "snd_soc_dai_set_sysclk err = %d\n", ret); + dev_err(runtime->dev, "Set sysclk failed: %d\n", ret);
- /* slot_width should equal or large than data length, set them be the same */ + /* slot_width should be equal or larger than data length. */ ret = snd_soc_dai_set_tdm_slot(codec_dai, 0x0, 0x0, 2, params_width(params)); - if (ret < 0) { - dev_err(runtime->dev, "set TDM slot err:%d\n", ret); - return ret; - } + if (ret < 0) + dev_err(runtime->dev, "Set TDM slot failed: %d\n", ret);
- return 0; + return ret; }
static const struct snd_soc_ops avs_rt5682_ops = {
On Thu, 29 Jun 2023 13:24:41 +0200, Cezary Rojewski wrote:
Series adds support for two boards: es8336 and rt5663. The former is utilized by some KBL-based tablets whereas the latter unlocks Chromebooks with rt5663 i2c codecs.
As existing implementation of es8336 (es8316.c) codec driver is not prepared to cope with KBL-based platforms, couple of small, clock-related changes precede anything avs-driver related.
[...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/8] ASoC: codecs: es8316: Add support for 24 MHz MCLK commit: be7dc10ab0bc247c2abbdefdaa9d5196df88e9d1 [2/8] ASoC: codecs: es8316: Add support for S24_3LE format commit: c30d10aeb398cf71662cb8c6b0090ed9ab38dd8e [3/8] ASoC: Intel: avs: Add es8336 machine board commit: 32e40c8d6ff920354fde36299198c80e7a7d3b76 [4/8] ASoC: Intel: avs: Load es8336 board on KBL-based platforms commit: d55bb0f1c1a365c42d8b4032cb965a255692a400 [5/8] ASoC: Intel: avs: Add rt5663 machine board commit: 05c5d4e326cc41221a9c065c1e6fee4cdca549b1 [6/8] ASoC: Intel: avs: Load rt5663 board on KBL-based platforms commit: 3ed180ac3cec77fe193573adcbaaca34bbc63551 [7/8] ASoC: Intel: avs: rt5682: Add missing components commit: 27cd41698de49c8afbcc148a0d76c35da3271519 [8/8] ASoC: Intel: avs: rt5682: Tidy up hw_params() commit: 7012fa7d56b7b3e100e4ff0c8d8d7a183f09130d
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
participants (2)
-
Cezary Rojewski
-
Mark Brown