The Iron Device SMA1303 is a boosted Class-D audio amplifier.

Signed-off-by: Kiseok Jo kiseok.jo@irondevice.com Reviewed-by: Gyuhwa Park gyuhwa.park@irondevice.com --- sound/soc/codecs/Kconfig | 7 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/sma1303.c | 2119 ++++++++++++++++++++++++++++++++++++ sound/soc/codecs/sma1303.h | 609 +++++++++++ 4 files changed, 2737 insertions(+) create mode 100644 sound/soc/codecs/sma1303.c create mode 100644 sound/soc/codecs/sma1303.h

diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 444cee829a26..79c28d663509 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -205,6 +205,7 @@ config SND_SOC_ALL_CODECS imply SND_SOC_SI476X imply SND_SOC_SIMPLE_AMPLIFIER imply SND_SOC_SIMPLE_MUX + imply SND_SOC_SMA1303 imply SND_SOC_SPDIF imply SND_SOC_SRC4XXX_I2C imply SND_SOC_SSM2305 @@ -1486,6 +1487,12 @@ config SND_SOC_SIMPLE_MUX tristate "Simple Audio Mux" depends on GPIOLIB

+config SND_SOC_SMA1303 + tristate "Iron Device SMA1303 Audio Amplifier" + depends on I2C + help + Enable support for Iron Device SMA1303 Boosted Class-D amplifier + config SND_SOC_SPDIF tristate "S/PDIF CODEC"

diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 9170ee1447dd..e185b8669e79 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -232,6 +232,7 @@ snd-soc-sigmadsp-objs := sigmadsp.o snd-soc-sigmadsp-i2c-objs := sigmadsp-i2c.o snd-soc-sigmadsp-regmap-objs := sigmadsp-regmap.o snd-soc-si476x-objs := si476x.o +snd-soc-sma1303-objs := sma1303.o snd-soc-spdif-tx-objs := spdif_transmitter.o snd-soc-spdif-rx-objs := spdif_receiver.o snd-soc-src4xxx-objs := src4xxx.o @@ -586,6 +587,7 @@ obj-$(CONFIG_SND_SOC_SIGMADSP) += snd-soc-sigmadsp.o obj-$(CONFIG_SND_SOC_SIGMADSP_I2C) += snd-soc-sigmadsp-i2c.o obj-$(CONFIG_SND_SOC_SIGMADSP_REGMAP) += snd-soc-sigmadsp-regmap.o obj-$(CONFIG_SND_SOC_SI476X) += snd-soc-si476x.o +obj-$(CONFIG_SND_SOC_SMA1303) += snd-soc-sma1303.o obj-$(CONFIG_SND_SOC_SPDIF) += snd-soc-spdif-rx.o snd-soc-spdif-tx.o obj-$(CONFIG_SND_SOC_SRC4XXX) += snd-soc-src4xxx.o obj-$(CONFIG_SND_SOC_SRC4XXX_I2C) += snd-soc-src4xxx-i2c.o diff --git a/sound/soc/codecs/sma1303.c b/sound/soc/codecs/sma1303.c new file mode 100644 index 000000000000..03c969a4891e --- /dev/null +++ b/sound/soc/codecs/sma1303.c @@ -0,0 +1,2119 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* sma1303.c -- sma1303 ALSA SoC Audio driver + * + * Copyright 2022 Iron Device Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pm.h> +#include <linux/i2c.h> +#include <linux/regmap.h> +#include <linux/version.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/initval.h> +#include <sound/tlv.h> +#include <linux/of_device.h> +#include <linux/slab.h> +#include <asm/div64.h> + +#include "sma1303.h" + +#define CHECK_PERIOD_TIME 1 /* sec per HZ */ + +#define PLL_MATCH(_input_clk_name, _output_clk_name, _input_clk,\ + _post_n, _n, _vco, _p_cp)\ +{\ + .input_clk_name = _input_clk_name,\ + .output_clk_name = _output_clk_name,\ + .input_clk = _input_clk,\ + .post_n = _post_n,\ + .n = _n,\ + .vco = _vco,\ + .p_cp = _p_cp,\ +} + +enum sma1303_type { + SMA1303, +}; + +struct sma1303_pll_match { + char *input_clk_name; + char *output_clk_name; + unsigned int input_clk; + unsigned int post_n; + unsigned int n; + unsigned int vco; + unsigned int p_cp; +}; + +struct sma1303_priv { + enum sma1303_type devtype; + struct device *dev; + struct attribute_group *attr_grp; + struct kobject *kobj; + struct regmap *regmap; + struct sma1303_pll_match *pll_matches; + struct mutex lock; + struct delayed_work check_fault_work; + bool amp_power_status; + bool usage_status; + int num_of_pll_matches; + unsigned int sys_clk_id; + unsigned int init_vol; + unsigned int cur_vol; + unsigned int tdm_slot_rx; + unsigned int tdm_slot_tx; + unsigned int tsdw_cnt; + unsigned int format; + unsigned int rev_num; + unsigned int last_over_temp; + unsigned int last_ocp_val; + unsigned int last_bclk; + unsigned int frame_size; + unsigned int amp_mode; + long check_fault_period; + long check_fault_status; +}; + +static struct sma1303_pll_match sma1303_pll_matches[] = { +PLL_MATCH("1.411MHz", "24.595MHz", 1411200, 0x07, 0xF4, 0x8B, 0x03), +PLL_MATCH("1.536MHz", "24.576MHz", 1536000, 0x07, 0xE0, 0x8B, 0x03), +PLL_MATCH("3.072MHz", "24.576MHz", 3072000, 0x07, 0x70, 0x8B, 0x03), +PLL_MATCH("6.144MHz", "24.576MHz", 6144000, 0x07, 0x70, 0x8B, 0x07), +PLL_MATCH("12.288MHz", "24.576MHz", 12288000, 0x07, 0x70, 0x8B, 0x0B), +PLL_MATCH("19.2MHz", "24.343MHz", 19200000, 0x07, 0x47, 0x8B, 0x0A), +PLL_MATCH("24.576MHz", "24.576MHz", 24576000, 0x07, 0x70, 0x8B, 0x0F), +}; + +static int sma1303_startup(struct snd_soc_component *); +static int sma1303_shutdown(struct snd_soc_component *); + +static const struct reg_default sma1303_reg_def[] = { + { 0x00, 0x80 }, + { 0x01, 0x00 }, + { 0x02, 0x00 }, + { 0x03, 0x11 }, + { 0x04, 0x17 }, + { 0x09, 0x00 }, + { 0x0A, 0x31 }, + { 0x0B, 0x98 }, + { 0x0C, 0x84 }, + { 0x0D, 0x07 }, + { 0x0E, 0x3F }, + { 0x10, 0x00 }, + { 0x11, 0x00 }, + { 0x12, 0x00 }, + { 0x14, 0x5C }, + { 0x15, 0x01 }, + { 0x16, 0x0F }, + { 0x17, 0x0F }, + { 0x18, 0x0F }, + { 0x19, 0x00 }, + { 0x1A, 0x00 }, + { 0x1B, 0x00 }, + { 0x23, 0x19 }, + { 0x24, 0x00 }, + { 0x25, 0x00 }, + { 0x26, 0x04 }, + { 0x33, 0x00 }, + { 0x36, 0x92 }, + { 0x37, 0x27 }, + { 0x3B, 0x5A }, + { 0x3C, 0x20 }, + { 0x3D, 0x00 }, + { 0x3E, 0x03 }, + { 0x3F, 0x0C }, + { 0x8B, 0x07 }, + { 0x8C, 0x70 }, + { 0x8D, 0x8B }, + { 0x8E, 0x6F }, + { 0x8F, 0x03 }, + { 0x90, 0x26 }, + { 0x91, 0x42 }, + { 0x92, 0xE0 }, + { 0x94, 0x35 }, + { 0x95, 0x0C }, + { 0x96, 0x42 }, + { 0x97, 0x95 }, + { 0xA0, 0x00 }, + { 0xA1, 0x3B }, + { 0xA2, 0xC8 }, + { 0xA3, 0x28 }, + { 0xA4, 0x40 }, + { 0xA5, 0x01 }, + { 0xA6, 0x41 }, + { 0xA7, 0x00 }, +}; + +static bool sma1303_readable_register(struct device *dev, unsigned int reg) +{ + bool result; + + if (reg > SMA1303_FF_DEVICE_INDEX) + return false; + + switch (reg) { + case SMA1303_00_SYSTEM_CTRL ... SMA1303_04_INPUT1_CTRL4: + case SMA1303_09_OUTPUT_CTRL ... SMA1303_0E_MUTE_VOL_CTRL: + case SMA1303_10_SYSTEM_CTRL1 ... SMA1303_12_SYSTEM_CTRL3: + case SMA1303_14_MODULATOR ... SMA1303_1B_BASS_SPK7: + case SMA1303_23_COMP_LIM1 ... SMA1303_26_COMP_LIM4: + case SMA1303_33_SDM_CTRL ... SMA1303_34_OTP_DATA1: + case SMA1303_36_PROTECTION ... SMA1303_38_OTP_TRM0: + case SMA1303_3B_TEST1 ... SMA1303_3F_ATEST2: + case SMA1303_8B_PLL_POST_N ... SMA1303_92_FDPEC_CTRL: + case SMA1303_94_BOOST_CTRL1 ... SMA1303_97_BOOST_CTRL4: + case SMA1303_A0_PAD_CTRL0 ... SMA1303_A7_CLK_MON: + case SMA1303_FA_STATUS1 ... SMA1303_FB_STATUS2: + result = true; + break; + case SMA1303_FF_DEVICE_INDEX: + result = true; + break; + default: + result = false; + } + return result; +} + +static bool sma1303_writeable_register(struct device *dev, unsigned int reg) +{ + bool result; + + if (reg > SMA1303_FF_DEVICE_INDEX) + return false; + + switch (reg) { + case SMA1303_00_SYSTEM_CTRL ... SMA1303_04_INPUT1_CTRL4: + case SMA1303_09_OUTPUT_CTRL ... SMA1303_0E_MUTE_VOL_CTRL: + case SMA1303_10_SYSTEM_CTRL1 ... SMA1303_12_SYSTEM_CTRL3: + case SMA1303_14_MODULATOR ... SMA1303_1B_BASS_SPK7: + case SMA1303_23_COMP_LIM1 ... SMA1303_26_COMP_LIM4: + case SMA1303_33_SDM_CTRL: + case SMA1303_36_PROTECTION ... SMA1303_37_SLOPE_CTRL: + case SMA1303_3B_TEST1 ... SMA1303_3F_ATEST2: + case SMA1303_8B_PLL_POST_N ... SMA1303_92_FDPEC_CTRL: + case SMA1303_94_BOOST_CTRL1 ... SMA1303_97_BOOST_CTRL4: + case SMA1303_A0_PAD_CTRL0 ... SMA1303_A7_CLK_MON: + result = true; + break; + default: + result = false; + } + return result; +} + +static bool sma1303_volatile_register(struct device *dev, unsigned int reg) +{ + bool result; + + switch (reg) { + case SMA1303_FA_STATUS1 ... SMA1303_FB_STATUS2: + result = true; + break; + case SMA1303_FF_DEVICE_INDEX: + result = true; + break; + default: + result = false; + } + return result; +} + +static const DECLARE_TLV_DB_SCALE(sma1303_spk_tlv, -6000, 50, 0); + +static int sma1303_regmap_write(struct regmap *map, struct device *dev, + unsigned int reg, unsigned int val) +{ + int ret = 0; + + ret = regmap_write(map, reg, val); + if (ret < 0) { + dev_err(dev, "Failed to write, register: 0x%02X, ret: %d\n", + reg, ret); + } + return ret; +} + +static int sma1303_regmap_update_bits(struct regmap *map, struct device *dev, + unsigned int reg, unsigned int mask, unsigned int val) +{ + int ret = 0; + + ret = regmap_update_bits(map, reg, mask, val); + if (ret < 0) { + dev_err(dev, "Failed to write, register: 0x%02X, ret: %d\n", + reg, ret); + } + return ret; +} + +static int bytes_ext_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol, int reg) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component); + struct soc_bytes_ext *params = (void *)kcontrol->private_value; + unsigned int i, reg_val; + u8 *val; + int ret = -1; + + if (component == NULL) { + pr_err("%s:component is NULL\n", __func__); + return ret; + } + if (sma1303 == NULL) { + pr_err("%s:sma1303 is NULL\n", __func__); + return ret; + } + val = (u8 *)ucontrol->value.bytes.data; + for (i = 0; i < params->max; i++) { + ret = regmap_read(sma1303->regmap, reg + i, &reg_val); + if (ret < 0) { + dev_err(component->dev, + "Failed to read, register: %x ret: %d\n", + reg + i, ret); + return ret; + } + if (sizeof(reg_val) > 2) + reg_val = cpu_to_le32(reg_val); + else + reg_val = cpu_to_le16(reg_val); + memcpy(val + i, &reg_val, sizeof(u8)); + } + + return 0; +} + +static int bytes_ext_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol, int reg) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component); + struct soc_bytes_ext *params = (void *)kcontrol->private_value; + void *data; + u8 *val; + int i, ret = -1; + + if (component == NULL) { + pr_err("%s:component is NULL\n", __func__); + return ret; + } + if (sma1303 == NULL) { + pr_err("%s:sma1303 is NULL\n", __func__); + return ret; + } + data = kmemdup(ucontrol->value.bytes.data, + params->max, GFP_KERNEL | GFP_DMA); + if (!data) + return -ENOMEM; + + val = (u8 *)data; + for (i = 0; i < params->max; i++) { + ret = sma1303_regmap_write( + sma1303->regmap, component->dev, + reg + i, *(val + i)); + if (ret < 0) { + kfree(data); + return ret; + } + } + kfree(data); + + return 0; +} + +static int amp_usage_status_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component); + int ret = -1; + + if (component == NULL) { + pr_err("%s:component is NULL\n", __func__); + return ret; + } + if (sma1303 == NULL) { + pr_err("%s:sma1303 is NULL\n", __func__); + return ret; + } + ucontrol->value.integer.value[0] = sma1303->usage_status; + + if (sma1303->usage_status) + dev_info(component->dev, "Amplifier Power Control Enabled\n"); + else + dev_info(component->dev, "Amplifier Power Control Disabled\n"); + + return 0; +} + +static int amp_usage_status_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component); + int ret = -1; + + if (component == NULL) { + pr_err("%s:component is NULL\n", __func__); + return ret; + } + if (sma1303 == NULL) { + pr_err("%s:sma1303 is NULL\n", __func__); + return ret; + } + + if ((sma1303->usage_status + != ucontrol->value.integer.value[0]) + && (!ucontrol->value.integer.value[0])) { + dev_info(component->dev, "%s\n", "Force AMP Power Down"); + ret = sma1303_shutdown(component); + if (ret < 0) { + ucontrol->value.integer.value[0] + = sma1303->usage_status; + return ret; + } + + } + sma1303->usage_status = ucontrol->value.integer.value[0]; + + return 0; +} + +static const char * const sma1303_amp_mode_text[] = { + "1 Chip", "Mono on 2 chips", "Left in 2 chips", "Right in 2chips"}; + +static const struct soc_enum sma1303_amp_mode_enum = + SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(sma1303_amp_mode_text), + sma1303_amp_mode_text); +static int sma1303_amp_mode_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component); + int ret = -1; + + if (component == NULL) { + pr_err("%s:component is NULL\n", __func__); + return ret; + } + if (sma1303 == NULL) { + pr_err("%s:sma1303 is NULL\n", __func__); + return ret; + } + ucontrol->value.integer.value[0] = sma1303->amp_mode; + + switch (sma1303->amp_mode) { + case ONE_CHIP_SOLUTION: + dev_info(component->dev, "Amplifier 1 Chip Solution\n"); + break; + case MONO_TWO_CHIP_SOLUTION: + dev_info(component->dev, "Amplifier Mono 2 Chips Solution\n"); + break; + case LEFT_TWO_CHIP_SOLUTION: + dev_info(component->dev, "Amplifier Stereo(Left) 2 Chips Solution\n"); + break; + case RIGHT_TWO_CHIP_SOLUTION: + dev_info(component->dev, "Amplifier Stereo(Right) 2 Chips Solution\n"); + break; + default: + dev_err(component->dev, "Invalid Value"); + return ret; + } + return 0; + +} + +static int sma1303_amp_mode_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component); + int ret = 0; + + if (component == NULL) { + pr_err("%s:component is NULL\n", __func__); + return -1; + } + if (sma1303 == NULL) { + pr_err("%s:sma1303 is NULL\n", __func__); + return -1; + } + + sma1303->amp_mode = ucontrol->value.integer.value[0]; + + switch (sma1303->amp_mode) { + case ONE_CHIP_SOLUTION: + case MONO_TWO_CHIP_SOLUTION: + ret += sma1303_regmap_update_bits( + sma1303->regmap, component->dev, + SMA1303_11_SYSTEM_CTRL2, + MONOMIX_MASK, MONOMIX_ON); + ret += sma1303_regmap_update_bits( + sma1303->regmap, component->dev, + SMA1303_11_SYSTEM_CTRL2, + LR_DATA_SW_MASK, LR_DATA_SW_NORMAL); + break; + case LEFT_TWO_CHIP_SOLUTION: + ret += sma1303_regmap_update_bits( + sma1303->regmap, component->dev, + SMA1303_11_SYSTEM_CTRL2, + MONOMIX_MASK, MONOMIX_OFF); + ret += sma1303_regmap_update_bits( + sma1303->regmap, component->dev, + SMA1303_11_SYSTEM_CTRL2, + LR_DATA_SW_MASK, LR_DATA_SW_NORMAL); + break; + case RIGHT_TWO_CHIP_SOLUTION: + ret += sma1303_regmap_update_bits( + sma1303->regmap, component->dev, + SMA1303_11_SYSTEM_CTRL2, + MONOMIX_MASK, MONOMIX_OFF); + ret += sma1303_regmap_update_bits( + sma1303->regmap, component->dev, + SMA1303_11_SYSTEM_CTRL2, + LR_DATA_SW_MASK, LR_DATA_SW_SWAP); + break; + default: + dev_err(component->dev, "Invalid Value"); + ret += -1; + } + + return ret; +} + +static const char * const sma1303_outport_config_text[] = { + "Enable", "Disable"}; + +static const struct soc_enum sma1303_outport_config_enum = + SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(sma1303_outport_config_text), + sma1303_outport_config_text); + +static int sma1303_outport_config_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component); + int ret = -1, data, val; + + if (component == NULL) { + pr_err("%s:component is NULL\n", __func__); + return ret; + } + if (sma1303 == NULL) { + pr_err("%s:sma1303 is NULL\n", __func__); + return ret; + } + + ret = regmap_read(sma1303->regmap, SMA1303_09_OUTPUT_CTRL, &data); + if (ret < 0) { + dev_err(component->dev, + "Failed to read, register: %x ret: %d\n", + SMA1303_09_OUTPUT_CTRL, ret); + return ret; + } + + val = data & PORT_CONFIG_MASK; + switch (val) { + case INPUT_PORT_ONLY: + ucontrol->value.integer.value[0] = 1; + break; + case OUTPUT_PORT_ENABLE: + ucontrol->value.integer.value[0] = 0; + break; + default: + dev_err(component->dev, + "Invalid value, register: %x value: %d\n", + SMA1303_09_OUTPUT_CTRL, val); + return ret; + } + + return 0; +} + +static int sma1303_outport_config_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component); + int sel = (int)ucontrol->value.integer.value[0]; + int val, ret = -1; + + if (component == NULL) { + pr_err("%s:component is NULL\n", __func__); + return ret; + } + if (sma1303 == NULL) { + pr_err("%s:sma1303 is NULL\n", __func__); + return ret; + } + + switch (sel) { + case 0: + val = OUTPUT_PORT_ENABLE; + break; + case 1: + val = INPUT_PORT_ONLY; + break; + default: + dev_err(component->dev, + "Invalid value, register: %x\n", + SMA1303_09_OUTPUT_CTRL); + return ret; + } + + return sma1303_regmap_update_bits(sma1303->regmap, component->dev, + SMA1303_09_OUTPUT_CTRL, PORT_CONFIG_MASK, val); +} + +static const char * const sma1303_spkmute_text[] = { + "Unmute", "Mute"}; + +static const struct soc_enum sma1303_spkmute_enum = + SOC_ENUM_SINGLE(SMA1303_0E_MUTE_VOL_CTRL, 0, + ARRAY_SIZE(sma1303_spkmute_text), + sma1303_spkmute_text); + +static const char * const sma1303_spkmode_text[] = { + "Off", "On"}; + +static const struct soc_enum sma1303_spkmode_enum = + SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(sma1303_spkmode_text), + sma1303_spkmode_text); + +static int sma1303_spkmode_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component); + int val, data, ret = -1; + + if (component == NULL) { + pr_err("%s:component is NULL\n", __func__); + return ret; + } + if (sma1303 == NULL) { + pr_err("%s:sma1303 is NULL\n", __func__); + return ret; + } + + ret = regmap_read(sma1303->regmap, SMA1303_10_SYSTEM_CTRL1, &data); + if (ret < 0) { + dev_err(component->dev, + "Failed to read, register: %x ret: %d\n", + SMA1303_10_SYSTEM_CTRL1, ret); + return ret; + } + + val = data & SPK_MODE_MASK; + if (sma1303->amp_mode == ONE_CHIP_SOLUTION) { + switch (val) { + case SPK_OFF: + ucontrol->value.integer.value[0] = 0; + break; + case SPK_MONO: + ucontrol->value.integer.value[0] = 1; + break; + default: + dev_err(component->dev, + "Invalid value, register: %x\n", + SMA1303_10_SYSTEM_CTRL1); + return ret; + } + } else { + switch (val) { + case SPK_OFF: + ucontrol->value.integer.value[0] = 0; + break; + case SPK_STEREO: + ucontrol->value.integer.value[0] = 1; + break; + default: + dev_err(component->dev, + "Invalid value, register: %x\n", + SMA1303_10_SYSTEM_CTRL1); + return ret; + } + } + + return 0; +} + +static int sma1303_spkmode_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component); + int sel = (int)ucontrol->value.integer.value[0]; + int val, ret = -1; + + if (component == NULL) { + pr_err("%s:component is NULL\n", __func__); + return ret; + } + if (sma1303 == NULL) { + pr_err("%s:sma1303 is NULL\n", __func__); + return ret; + } + + switch (sel) { + case 0: + val = SPK_OFF; + break; + case 1: + if (sma1303->amp_mode == ONE_CHIP_SOLUTION) + val = SPK_MONO; + else + val = SPK_STEREO; + break; + default: + dev_err(component->dev, + "Invalid value, register: %x\n", + SMA1303_10_SYSTEM_CTRL1); + return ret; + } + + return sma1303_regmap_update_bits(sma1303->regmap, component->dev, + SMA1303_10_SYSTEM_CTRL1, SPK_MODE_MASK, val); +} + +static int postscaler_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + return bytes_ext_get(kcontrol, ucontrol, SMA1303_90_POSTSCALER); +} + +static int postscaler_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + return bytes_ext_put(kcontrol, ucontrol, SMA1303_90_POSTSCALER); +} + +static const char * const sma1303_postscaler_config_text[] = { + "Enable", "Disable"}; + +static const struct soc_enum sma1303_postscaler_config_enum = + SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(sma1303_postscaler_config_text), + sma1303_postscaler_config_text); + +static int sma1303_postscaler_config_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component); + int ret = -1, data, val; + + if (component == NULL) { + pr_err("%s:component is NULL\n", __func__); + return ret; + } + if (sma1303 == NULL) { + pr_err("%s:sma1303 is NULL\n", __func__); + return ret; + } + + ret = regmap_read(sma1303->regmap, SMA1303_90_POSTSCALER, &data); + if (ret < 0) { + dev_err(component->dev, + "Failed to read, register: %x ret: %d\n", + SMA1303_90_POSTSCALER, ret); + return ret; + } + + val = data & BYP_POST_MASK; + switch (val) { + case BYP_POST_SCALER: + ucontrol->value.integer.value[0] = 1; + break; + case EN_POST_SCALER: + ucontrol->value.integer.value[0] = 0; + break; + default: + dev_err(component->dev, + "Invalid value, register: %x value: %d\n", + SMA1303_90_POSTSCALER, val); + return ret; + } + + return 0; +} + +static int sma1303_postscaler_config_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component); + int sel = (int)ucontrol->value.integer.value[0]; + int val, ret = -1; + + if (component == NULL) { + pr_err("%s:component is NULL\n", __func__); + return ret; + } + if (sma1303 == NULL) { + pr_err("%s:sma1303 is NULL\n", __func__); + return ret; + } + + switch (sel) { + case 0: + val = EN_POST_SCALER; + break; + case 1: + val = BYP_POST_SCALER; + break; + default: + dev_err(component->dev, + "Invalid value, register: %x\n", + SMA1303_90_POSTSCALER); + return ret; + } + + return sma1303_regmap_update_bits(sma1303->regmap, component->dev, + SMA1303_90_POSTSCALER, BYP_POST_MASK, val); +} + +static const char * const sma1303_o_format_text[] = { + "LJ", "I2S", "TDM"}; + +static const struct soc_enum sma1303_o_format_enum = +SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(sma1303_o_format_text), sma1303_o_format_text); + +static int sma1303_o_format_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component); + int val, data, ret = -1; + + if (component == NULL) { + pr_err("%s:component is NULL\n", __func__); + return ret; + } + if (sma1303 == NULL) { + pr_err("%s:sma1303 is NULL\n", __func__); + return ret; + } + + ret = regmap_read(sma1303->regmap, SMA1303_A4_TOP_MAN3, &data); + val = data & O_FORMAT_MASK; + switch (val) { + case O_FMT_LJ: + ucontrol->value.integer.value[0] = 0; + break; + case O_FMT_I2S: + ucontrol->value.integer.value[0] = 1; + break; + case O_FMT_TDM: + ucontrol->value.integer.value[0] = 2; + break; + default: + dev_err(component->dev, + "Invalid value, register: %x\n", + SMA1303_A4_TOP_MAN3); + return ret; + } + + return 0; +} +static int sma1303_o_format_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component); + int sel = (int)ucontrol->value.integer.value[0]; + int val, ret = -1; + + if (component == NULL) { + pr_err("%s:component is NULL\n", __func__); + return ret; + } + if (sma1303 == NULL) { + pr_err("%s:sma1303 is NULL\n", __func__); + return ret; + } + + switch (sel) { + case 0: + val = O_FMT_LJ; + break; + case 1: + val = O_FMT_I2S; + break; + case 2: + val = O_FMT_TDM; + break; + default: + dev_err(component->dev, + "Invalid value, register: %x\n", + SMA1303_A4_TOP_MAN3); + return ret; + } + + return sma1303_regmap_update_bits(sma1303->regmap, component->dev, + SMA1303_A4_TOP_MAN3, O_FORMAT_MASK, val); +} + +static const char * const sma1303_sdo_source_texts[] = { + "Disable", "Format_C", "Mixer_Out", "After_DSP", "After_Post"}; +static const unsigned int sma1303_sdo_source_values[] = { + OUT_SEL_DISABLE, + FORMAT_CONVERTER, + MIXER_OUTPUT, + SPEAKER_PATH, + POSTSCALER_OUTPUT}; +static SOC_VALUE_ENUM_SINGLE_DECL(sma1303_sdo_source_enum, + SMA1303_09_OUTPUT_CTRL, + 0, PORT_OUT_SEL_MASK, + sma1303_sdo_source_texts, + sma1303_sdo_source_values); +static const struct snd_kcontrol_new sma1303_sdo_source_mux = + SOC_DAPM_ENUM("SDO Source", sma1303_sdo_source_enum); + +static const struct snd_kcontrol_new sma1303_snd_controls[] = { +SOC_SINGLE_EXT("Amplifier Usage", SND_SOC_NOPM, 0, 1, 0, + amp_usage_status_get, amp_usage_status_put), +SOC_ENUM_EXT("Amplifier Mode", sma1303_amp_mode_enum, + sma1303_amp_mode_get, sma1303_amp_mode_put), +SOC_ENUM_EXT("Outport config", sma1303_outport_config_enum, + sma1303_outport_config_get, sma1303_outport_config_put), +SOC_SINGLE_TLV("Speaker Volume", SMA1303_0A_SPK_VOL, + 0, 167, 1, sma1303_spk_tlv), +SOC_ENUM("Speaker Mute Switch", sma1303_spkmute_enum), +SOC_ENUM_EXT("Speaker Output", sma1303_spkmode_enum, + sma1303_spkmode_get, sma1303_spkmode_put), +SND_SOC_BYTES_EXT("Postscaler Set", 1, + postscaler_get, postscaler_put), +SOC_ENUM_EXT("Postscaler Config", sma1303_postscaler_config_enum, + sma1303_postscaler_config_get, sma1303_postscaler_config_put), +SOC_ENUM_EXT("Output Format", sma1303_o_format_enum, + sma1303_o_format_get, sma1303_o_format_put), +}; + +static int sma1303_startup(struct snd_soc_component *component) +{ + struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component); + int ret = 0; + + if (sma1303->amp_power_status) { + dev_info(component->dev, "%s : %s\n", + __func__, "Already AMP Power on"); + return ret; + } + + ret += sma1303_regmap_update_bits(sma1303->regmap, component->dev, + SMA1303_8E_PLL_CTRL, PLL_PD2_MASK, PLL_OPERATION2); + + ret += sma1303_regmap_update_bits(sma1303->regmap, component->dev, + SMA1303_00_SYSTEM_CTRL, POWER_MASK, POWER_ON); + + if (sma1303->amp_mode == ONE_CHIP_SOLUTION) + ret += sma1303_regmap_update_bits(sma1303->regmap, component->dev, + SMA1303_10_SYSTEM_CTRL1, SPK_MODE_MASK, SPK_MONO); + else + ret += sma1303_regmap_update_bits(sma1303->regmap, component->dev, + SMA1303_10_SYSTEM_CTRL1, SPK_MODE_MASK, SPK_STEREO); + + if (sma1303->check_fault_status) { + if (sma1303->check_fault_period > 0) + queue_delayed_work(system_freezable_wq, + &sma1303->check_fault_work, + sma1303->check_fault_period * HZ); + else + queue_delayed_work(system_freezable_wq, + &sma1303->check_fault_work, + CHECK_PERIOD_TIME * HZ); + } + + ret += sma1303_regmap_update_bits(sma1303->regmap, component->dev, + SMA1303_0E_MUTE_VOL_CTRL, SPK_MUTE_MASK, SPK_UNMUTE); + + sma1303->amp_power_status = true; + + return ret; +} + +static int sma1303_shutdown(struct snd_soc_component *component) +{ + struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component); + int ret = 0; + + if (!(sma1303->amp_power_status)) { + dev_info(component->dev, "%s : %s\n", + __func__, "Already AMP Shutdown"); + return ret; + } + + ret += sma1303_regmap_update_bits(sma1303->regmap, component->dev, + SMA1303_0E_MUTE_VOL_CTRL, SPK_MUTE_MASK, SPK_MUTE); + + cancel_delayed_work_sync(&sma1303->check_fault_work); + + msleep(55); + + ret += sma1303_regmap_update_bits(sma1303->regmap, component->dev, + SMA1303_10_SYSTEM_CTRL1, SPK_MODE_MASK, SPK_OFF); + + ret += sma1303_regmap_update_bits(sma1303->regmap, component->dev, + SMA1303_00_SYSTEM_CTRL, POWER_MASK, POWER_OFF); + + ret += sma1303_regmap_update_bits(sma1303->regmap, component->dev, + SMA1303_8E_PLL_CTRL, PLL_PD2_MASK, PLL_PD2); + + sma1303->amp_power_status = false; + + return ret; +} + +static int sma1303_clk_supply_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = + snd_soc_dapm_to_component(w->dapm); + + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + dev_info(component->dev, "%s : PRE_PMU\n", __func__); + break; + + case SND_SOC_DAPM_POST_PMD: + dev_info(component->dev, "%s : POST_PMD\n", __func__); + break; + } + + return 0; +} + +static int sma1303_dac_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = + snd_soc_dapm_to_component(w->dapm); + struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component); + + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + dev_info(component->dev, "%s : PRE_PMU\n", __func__); + + if (sma1303->usage_status) + sma1303_startup(component); + + break; + + case SND_SOC_DAPM_POST_PMU: + dev_info(component->dev, "%s : POST_PMU\n", __func__); + + break; + + case SND_SOC_DAPM_PRE_PMD: + dev_info(component->dev, "%s : PRE_PMD\n", __func__); + + sma1303_shutdown(component); + + break; + + case SND_SOC_DAPM_POST_PMD: + dev_info(component->dev, "%s : POST_PMD\n", __func__); + + break; + } + + return 0; +} + +static int sma1303_dac_feedback_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = + snd_soc_dapm_to_component(w->dapm); + struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component); + int ret = 0; + + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + dev_info(component->dev, + "%s : DAC feedback ON\n", __func__); + ret += sma1303_regmap_update_bits( + sma1303->regmap, component->dev, + SMA1303_09_OUTPUT_CTRL, + PORT_CONFIG_MASK|PORT_OUT_SEL_MASK, + OUTPUT_PORT_ENABLE|SPEAKER_PATH); + + ret += sma1303_regmap_update_bits( + sma1303->regmap, component->dev, + SMA1303_A3_TOP_MAN2, + SDO_OUTPUT_MASK, NORMAL_OUT); + break; + + case SND_SOC_DAPM_PRE_PMD: + dev_info(component->dev, + "%s : DAC feedback OFF\n", __func__); + ret += sma1303_regmap_update_bits( + sma1303->regmap, component->dev, + SMA1303_09_OUTPUT_CTRL, + PORT_OUT_SEL_MASK, OUT_SEL_DISABLE); + + ret += sma1303_regmap_update_bits( + sma1303->regmap, component->dev, + SMA1303_A3_TOP_MAN2, SDO_OUTPUT_MASK, + HIGH_Z_OUT); + break; + } + + return ret; +} + +static const struct snd_soc_dapm_widget sma1303_dapm_widgets[] = { +SND_SOC_DAPM_SUPPLY("CLK_SUPPLY", SND_SOC_NOPM, 0, 0, sma1303_clk_supply_event, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), +SND_SOC_DAPM_DAC_E("DAC", "Playback", SND_SOC_NOPM, 0, 0, sma1303_dac_event, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU | + SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD), +SND_SOC_DAPM_ADC_E("DAC_FEEDBACK", "Capture", SND_SOC_NOPM, 0, 0, + sma1303_dac_feedback_event, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD), +SND_SOC_DAPM_OUTPUT("SPK"), +SND_SOC_DAPM_INPUT("SDO"), +SND_SOC_DAPM_MUX("SDO Source", SND_SOC_NOPM, 0, 0, &sma1303_sdo_source_mux), +}; + +static const struct snd_soc_dapm_route sma1303_audio_map[] = { +{"DAC", NULL, "CLK_SUPPLY"}, +{"SPK", NULL, "DAC"}, +{"SDO Source", "Disable", "SDO"}, +{"SDO Source", "Format_C", "SDO"}, +{"SDO Source", "Mixer_Out", "SDO"}, +{"SDO Source", "After_DSP", "SDO"}, +{"SDO Source", "After_Post", "SDO"}, +{"DAC_FEEDBACK", NULL, "SDO Source"}, +}; + +static int sma1303_setup_pll(struct snd_soc_component *component, + unsigned int bclk) +{ + struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component); + + int i = 0, ret = 0; + + dev_info(component->dev, "%s : BCLK = %dHz\n", + __func__, bclk); + + if (sma1303->sys_clk_id == SMA1303_PLL_CLKIN_MCLK) { + dev_info(component->dev, "%s : MCLK is not supported\n", + __func__); + } else if (sma1303->sys_clk_id == SMA1303_PLL_CLKIN_BCLK) { + for (i = 0; i < sma1303->num_of_pll_matches; i++) { + if (sma1303->pll_matches[i].input_clk == bclk) + break; + } + if (i == sma1303->num_of_pll_matches) { + dev_info(component->dev, "%s : No matching value between pll table and SCK\n", + __func__); + return -EINVAL; + } + + ret += sma1303_regmap_update_bits( + sma1303->regmap, component->dev, + SMA1303_A2_TOP_MAN1, + PLL_PD_MASK|PLL_REF_CLK_MASK, + PLL_OPERATION|PLL_SCK); + } + + ret += sma1303_regmap_write(sma1303->regmap, component->dev, + SMA1303_8B_PLL_POST_N, + sma1303->pll_matches[i].post_n); + + ret += sma1303_regmap_write(sma1303->regmap, component->dev, + SMA1303_8C_PLL_N, + sma1303->pll_matches[i].n); + + ret += sma1303_regmap_write(sma1303->regmap, component->dev, + SMA1303_8D_PLL_A_SETTING, + sma1303->pll_matches[i].vco); + + ret += sma1303_regmap_write(sma1303->regmap, component->dev, + SMA1303_8F_PLL_P_CP, + sma1303->pll_matches[i].p_cp); + + return ret; +} + +static int sma1303_dai_hw_params_amp(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component); + unsigned int input_format = 0; + unsigned int bclk = 0; + int ret = 0; + + if (sma1303->format == SND_SOC_DAIFMT_DSP_A) + bclk = params_rate(params) * sma1303->frame_size; + else + bclk = params_rate(params) * params_physical_width(params) + * params_channels(params); + + dev_info(component->dev, + "%s : rate = %d : bit size = %d : channel = %d\n", + __func__, params_rate(params), params_width(params), + params_channels(params)); + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + + if (sma1303->usage_status && + (sma1303->sys_clk_id == SMA1303_PLL_CLKIN_MCLK + || sma1303->sys_clk_id == SMA1303_PLL_CLKIN_BCLK)) { + + if (sma1303->last_bclk != bclk) { + if (sma1303->amp_power_status) { + sma1303_shutdown(component); + sma1303_setup_pll(component, bclk); + sma1303_startup(component); + } else + sma1303_setup_pll(component, bclk); + + sma1303->last_bclk = bclk; + } + } + + switch (params_rate(params)) { + case 8000: + case 12000: + case 16000: + case 24000: + case 32000: + case 44100: + case 48000: + case 96000: + ret += sma1303_regmap_update_bits( + sma1303->regmap, component->dev, + SMA1303_A2_TOP_MAN1, + DAC_DN_CONV_MASK, DAC_DN_CONV_DISABLE); + + ret += sma1303_regmap_update_bits( + sma1303->regmap, component->dev, + SMA1303_01_INPUT1_CTRL1, + LEFTPOL_MASK, LOW_FIRST_CH); + break; + + case 192000: + ret += sma1303_regmap_update_bits( + sma1303->regmap, component->dev, + SMA1303_A2_TOP_MAN1, + DAC_DN_CONV_MASK, DAC_DN_CONV_ENABLE); + + ret += sma1303_regmap_update_bits( + sma1303->regmap, component->dev, + SMA1303_01_INPUT1_CTRL1, + LEFTPOL_MASK, HIGH_FIRST_CH); + break; + + default: + dev_err(component->dev, "%s not support rate : %d\n", + __func__, params_rate(params)); + + return -EINVAL; + } + + } else { + + switch (params_format(params)) { + + case SNDRV_PCM_FORMAT_S16_LE: + dev_info(component->dev, + "%s set format SNDRV_PCM_FORMAT_S16_LE\n", + __func__); + ret += sma1303_regmap_update_bits( + sma1303->regmap, component->dev, + SMA1303_A4_TOP_MAN3, + SCK_RATE_MASK, SCK_32FS); + break; + + case SNDRV_PCM_FORMAT_S24_LE: + dev_info(component->dev, + "%s set format SNDRV_PCM_FORMAT_S24_LE\n", + __func__); + ret += sma1303_regmap_update_bits( + sma1303->regmap, component->dev, + SMA1303_A4_TOP_MAN3, + SCK_RATE_MASK, SCK_64FS); + break; + case SNDRV_PCM_FORMAT_S32_LE: + dev_info(component->dev, + "%s set format SNDRV_PCM_FORMAT_S32_LE\n", + __func__); + ret += sma1303_regmap_update_bits( + sma1303->regmap, component->dev, + SMA1303_A4_TOP_MAN3, + SCK_RATE_MASK, SCK_64FS); + break; + default: + dev_err(component->dev, + "%s not support data bit : %d\n", __func__, + params_format(params)); + return -EINVAL; + } + } + + switch (params_width(params)) { + case 16: + switch (sma1303->format) { + case SND_SOC_DAIFMT_I2S: + input_format |= STANDARD_I2S; + break; + case SND_SOC_DAIFMT_LEFT_J: + input_format |= LJ; + break; + case SND_SOC_DAIFMT_RIGHT_J: + input_format |= RJ_16BIT; + break; + } + break; + case 24: + case 32: + switch (sma1303->format) { + case SND_SOC_DAIFMT_I2S: + input_format |= STANDARD_I2S; + break; + case SND_SOC_DAIFMT_LEFT_J: + input_format |= LJ; + break; + case SND_SOC_DAIFMT_RIGHT_J: + input_format |= RJ_24BIT; + break; + } + break; + + default: + dev_err(component->dev, + "%s not support data bit : %d\n", __func__, + params_format(params)); + return -EINVAL; + } + + ret += sma1303_regmap_update_bits( + sma1303->regmap, component->dev, + SMA1303_01_INPUT1_CTRL1, + I2S_MODE_MASK, input_format); + return ret; +} + +static int sma1303_dai_set_sysclk_amp(struct snd_soc_dai *dai, + int clk_id, unsigned int freq, int dir) +{ + struct snd_soc_component *component = dai->component; + struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component); + + switch (clk_id) { + case SMA1303_EXTERNAL_CLOCK_19_2: + break; + case SMA1303_EXTERNAL_CLOCK_24_576: + break; + case SMA1303_PLL_CLKIN_MCLK: + break; + case SMA1303_PLL_CLKIN_BCLK: + break; + default: + dev_err(component->dev, "Invalid clk id: %d\n", clk_id); + return -EINVAL; + } + sma1303->sys_clk_id = clk_id; + return 0; +} + +static int sma1303_dai_mute(struct snd_soc_dai *dai, int mute, int stream) +{ + struct snd_soc_component *component = dai->component; + struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component); + int ret = 0; + + if (stream == SNDRV_PCM_STREAM_CAPTURE) + return ret; + + if (!(sma1303->amp_power_status)) { + dev_info(component->dev, "%s : %s\n", + __func__, "Already AMP Shutdown"); + return ret; + } + + if (mute) { + dev_info(component->dev, "%s : %s\n", __func__, "MUTE"); + + ret += sma1303_regmap_update_bits( + sma1303->regmap, component->dev, + SMA1303_0E_MUTE_VOL_CTRL, + SPK_MUTE_MASK, SPK_MUTE); + } else { + dev_info(component->dev, "%s : %s\n", __func__, "UNMUTE"); + + ret += sma1303_regmap_update_bits( + sma1303->regmap, component->dev, + SMA1303_0E_MUTE_VOL_CTRL, + SPK_MUTE_MASK, SPK_UNMUTE); + } + + return ret; +} + +static int sma1303_dai_set_fmt_amp(struct snd_soc_dai *dai, + unsigned int fmt) +{ + struct snd_soc_component *component = dai->component; + struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component); + int ret = 0; + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + + case SND_SOC_DAIFMT_CBS_CFS: + dev_info(component->dev, + "%s : %s\n", __func__, "I2S/TDM Device mode"); + ret += sma1303_regmap_update_bits( + sma1303->regmap, component->dev, + SMA1303_01_INPUT1_CTRL1, + CONTROLLER_DEVICE_MASK, DEVICE_MODE); + break; + + case SND_SOC_DAIFMT_CBM_CFM: + dev_info(component->dev, + "%s : %s\n", __func__, "I2S/TDM Controller mode"); + ret += sma1303_regmap_update_bits( + sma1303->regmap, component->dev, + SMA1303_01_INPUT1_CTRL1, + CONTROLLER_DEVICE_MASK, CONTROLLER_MODE); + break; + + default: + dev_err(component->dev, + "Unsupported Controller/Device : 0x%x\n", fmt); + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + + case SND_SOC_DAIFMT_I2S: + case SND_SOC_DAIFMT_RIGHT_J: + case SND_SOC_DAIFMT_LEFT_J: + case SND_SOC_DAIFMT_DSP_A: + case SND_SOC_DAIFMT_DSP_B: + sma1303->format = fmt & SND_SOC_DAIFMT_FORMAT_MASK; + break; + default: + dev_err(component->dev, + "Unsupported Audio Interface Format : 0x%x\n", fmt); + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + + case SND_SOC_DAIFMT_IB_NF: + dev_info(component->dev, "%s : %s\n", + __func__, "Invert BCLK + Normal Frame"); + ret += sma1303_regmap_update_bits( + sma1303->regmap, component->dev, + SMA1303_01_INPUT1_CTRL1, + SCK_RISING_MASK, SCK_RISING_EDGE); + break; + case SND_SOC_DAIFMT_IB_IF: + dev_info(component->dev, "%s : %s\n", + __func__, "Invert BCLK + Invert Frame"); + ret += sma1303_regmap_update_bits( + sma1303->regmap, component->dev, + SMA1303_01_INPUT1_CTRL1, + LEFTPOL_MASK|SCK_RISING_MASK, + HIGH_FIRST_CH|SCK_RISING_EDGE); + break; + case SND_SOC_DAIFMT_NB_IF: + dev_info(component->dev, "%s : %s\n", + __func__, "Normal BCLK + Invert Frame"); + ret += sma1303_regmap_update_bits( + sma1303->regmap, component->dev, + SMA1303_01_INPUT1_CTRL1, + LEFTPOL_MASK, HIGH_FIRST_CH); + break; + case SND_SOC_DAIFMT_NB_NF: + dev_info(component->dev, "%s : %s\n", + __func__, "Normal BCLK + Normal Frame"); + break; + default: + dev_err(component->dev, + "Unsupported Bit & Frameclock : 0x%x\n", fmt); + return -EINVAL; + } + + return ret; +} + +static int sma1303_dai_set_tdm_slot(struct snd_soc_dai *dai, + unsigned int tx_mask, unsigned int rx_mask, + int slots, int slot_width) +{ + struct snd_soc_component *component = dai->component; + struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component); + int ret = 0; + + dev_info(component->dev, "%s : slots = %d, slot_width - %d\n", + __func__, slots, slot_width); + + sma1303->frame_size = slot_width * slots; + + ret += sma1303_regmap_update_bits( + sma1303->regmap, component->dev, + SMA1303_A4_TOP_MAN3, + O_FORMAT_MASK, O_FMT_TDM); + + switch (slot_width) { + case 16: + ret += sma1303_regmap_update_bits( + sma1303->regmap, component->dev, + SMA1303_A6_TDM2, + TDM_DL_MASK, TDM_DL_16); + break; + case 32: + ret += sma1303_regmap_update_bits( + sma1303->regmap, component->dev, + SMA1303_A6_TDM2, + TDM_DL_MASK, TDM_DL_32); + break; + default: + dev_err(component->dev, "%s not support TDM %d slot_width\n", + __func__, slot_width); + } + + switch (slots) { + case 4: + ret += sma1303_regmap_update_bits( + sma1303->regmap, component->dev, + SMA1303_A6_TDM2, + TDM_N_SLOT_MASK, TDM_N_SLOT_4); + break; + case 8: + ret += sma1303_regmap_update_bits( + sma1303->regmap, component->dev, + SMA1303_A6_TDM2, + TDM_N_SLOT_MASK, TDM_N_SLOT_8); + break; + default: + dev_err(component->dev, "%s not support TDM %d slots\n", + __func__, slots); + } + + if (sma1303->tdm_slot_rx < slots) + ret += sma1303_regmap_update_bits( + sma1303->regmap, component->dev, + SMA1303_A5_TDM1, TDM_SLOT1_RX_POS_MASK, + (sma1303->tdm_slot_rx) << 3); + else + dev_err(component->dev, "%s Incorrect tdm-slot-rx %d set\n", + __func__, sma1303->tdm_slot_rx); + + ret += sma1303_regmap_update_bits( + sma1303->regmap, component->dev, + SMA1303_A5_TDM1, + TDM_CLK_POL_MASK, TDM_CLK_POL_RISE); + + ret += sma1303_regmap_update_bits( + sma1303->regmap, component->dev, + SMA1303_A5_TDM1, + TDM_TX_MODE_MASK, TDM_TX_MONO); + + if (sma1303->tdm_slot_tx < slots) + ret += sma1303_regmap_update_bits( + sma1303->regmap, component->dev, + SMA1303_A6_TDM2, TDM_SLOT1_TX_POS_MASK, + (sma1303->tdm_slot_tx) << 3); + else + dev_err(component->dev, "%s Incorrect tdm-slot-tx %d set\n", + __func__, sma1303->tdm_slot_tx); + + return ret; +} + +static const struct snd_soc_dai_ops sma1303_dai_ops_amp = { + .set_sysclk = sma1303_dai_set_sysclk_amp, + .set_fmt = sma1303_dai_set_fmt_amp, + .hw_params = sma1303_dai_hw_params_amp, + .mute_stream = sma1303_dai_mute, + .set_tdm_slot = sma1303_dai_set_tdm_slot, +}; + +#define SMA1303_RATES SNDRV_PCM_RATE_8000_192000 +#define SMA1303_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE | \ + SNDRV_PCM_FMTBIT_S32_LE) + +static struct snd_soc_dai_driver sma1303_dai[] = { +{ + .name = "sma1303-amplifier", + .id = 0, + .playback = { + .stream_name = "Playback", + .channels_min = 1, + .channels_max = 2, + .rates = SMA1303_RATES, + .formats = SMA1303_FORMATS, + }, + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = 2, + .rates = SMA1303_RATES, + .formats = SMA1303_FORMATS, + }, + .ops = &sma1303_dai_ops_amp, +} +}; + +static void sma1303_check_fault_worker(struct work_struct *work) +{ + struct sma1303_priv *sma1303 = + container_of(work, struct sma1303_priv, check_fault_work.work); + int ret = 0; + unsigned int over_temp, ocp_val, uvlo_val; + + mutex_lock(&sma1303->lock); + + if (sma1303->tsdw_cnt) + ret = regmap_read(sma1303->regmap, + SMA1303_0A_SPK_VOL, &sma1303->cur_vol); + else + ret = regmap_read(sma1303->regmap, + SMA1303_0A_SPK_VOL, &sma1303->init_vol); + + if (ret != 0) { + dev_err(sma1303->dev, + "failed to read SMA1303_0A_SPK_VOL : %d\n", ret); + mutex_unlock(&sma1303->lock); + return; + } + + ret = regmap_read(sma1303->regmap, SMA1303_FA_STATUS1, &over_temp); + if (ret != 0) { + dev_err(sma1303->dev, + "failed to read SMA1303_FA_STATUS1 : %d\n", ret); + mutex_unlock(&sma1303->lock); + return; + } + + ret = regmap_read(sma1303->regmap, SMA1303_FB_STATUS2, &ocp_val); + if (ret != 0) { + dev_err(sma1303->dev, + "failed to read SMA1303_FB_STATUS2 : %d\n", ret); + mutex_unlock(&sma1303->lock); + return; + } + + ret = regmap_read(sma1303->regmap, SMA1303_FF_DEVICE_INDEX, &uvlo_val); + if (ret != 0) { + dev_err(sma1303->dev, + "failed to read SMA1303_FF_DEVICE_INDEX : %d\n", ret); + mutex_unlock(&sma1303->lock); + return; + } + + if (~over_temp & OT1_OK_STATUS) { + dev_crit(sma1303->dev, + "%s : OT1(Over Temperature Level 1)\n", __func__); + + if ((sma1303->cur_vol + 6) <= 0xFF) + sma1303_regmap_write( + sma1303->regmap, sma1303->dev, + SMA1303_0A_SPK_VOL, sma1303->cur_vol + 6); + + sma1303->tsdw_cnt++; + } else if (sma1303->tsdw_cnt) { + sma1303_regmap_write( + sma1303->regmap, sma1303->dev, + SMA1303_0A_SPK_VOL, sma1303->init_vol); + sma1303->tsdw_cnt = 0; + sma1303->cur_vol = sma1303->init_vol; + } + + if (~over_temp & OT2_OK_STATUS) { + dev_crit(sma1303->dev, + "%s : OT2(Over Temperature Level 2)\n", __func__); + } + if (ocp_val & OCP_SPK_STATUS) { + dev_crit(sma1303->dev, + "%s : OCP_SPK(Over Current Protect SPK)\n", __func__); + } + if (ocp_val & OCP_BST_STATUS) { + dev_crit(sma1303->dev, + "%s : OCP_BST(Over Current Protect Boost)\n", __func__); + } + if ((ocp_val & CLK_MON_STATUS) && (sma1303->amp_power_status)) { + dev_crit(sma1303->dev, + "%s : CLK_FAULT(No clock input)\n", __func__); + } + if (uvlo_val & UVLO_BST_STATUS) { + dev_crit(sma1303->dev, + "%s : UVLO(Under Voltage Lock Out)\n", __func__); + } + + if ((over_temp != sma1303->last_over_temp) || + (ocp_val != sma1303->last_ocp_val)) { + + dev_crit(sma1303->dev, "Please check AMP status"); + dev_info(sma1303->dev, "STATUS1=0x%02X : STATUS2=0x%02X\n", + over_temp, ocp_val); + sma1303->last_over_temp = over_temp; + sma1303->last_ocp_val = ocp_val; + } + + if (sma1303->check_fault_status) { + if (sma1303->check_fault_period > 0) + queue_delayed_work(system_freezable_wq, + &sma1303->check_fault_work, + sma1303->check_fault_period * HZ); + else + queue_delayed_work(system_freezable_wq, + &sma1303->check_fault_work, + CHECK_PERIOD_TIME * HZ); + } + + if (!(~over_temp & OT1_OK_STATUS) && !(~over_temp & OT2_OK_STATUS) + && !(ocp_val & OCP_SPK_STATUS) + && !(ocp_val & OCP_BST_STATUS) + && !(ocp_val & CLK_MON_STATUS) + && !(uvlo_val & UVLO_BST_STATUS)) { + } + + mutex_unlock(&sma1303->lock); +} + +#ifdef CONFIG_PM +static int sma1303_suspend(struct snd_soc_component *component) +{ + return 0; +} + +static int sma1303_resume(struct snd_soc_component *component) +{ + return 0; +} +#else +#define sma1303_suspend NULL +#define sma1303_resume NULL +#endif + +static int sma1303_probe(struct snd_soc_component *component) +{ + struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component); + struct snd_soc_dapm_context *dapm = + snd_soc_component_get_dapm(component); + char *dapm_widget_str = NULL; + int prefix_len = 0, str_max = 30, ret = 0, i = 0; + unsigned int status, otp_stat; + + if (component->name_prefix != NULL) { + dev_info(component->dev, "%s : component name prefix - %s\n", + __func__, component->name_prefix); + + prefix_len = strlen(component->name_prefix); + dapm_widget_str = kzalloc(prefix_len + str_max, GFP_KERNEL); + + if (!dapm_widget_str) { + kfree(dapm_widget_str); + return -ENOMEM; + } + + strcpy(dapm_widget_str, component->name_prefix); + strcat(dapm_widget_str, " Playback"); + + snd_soc_dapm_ignore_suspend(dapm, dapm_widget_str); + + memset(dapm_widget_str + prefix_len, 0, str_max); + + strcpy(dapm_widget_str, component->name_prefix); + strcat(dapm_widget_str, " SPK"); + + snd_soc_dapm_ignore_suspend(dapm, dapm_widget_str); + + kfree(dapm_widget_str); + } else { + snd_soc_dapm_ignore_suspend(dapm, "Playback"); + snd_soc_dapm_ignore_suspend(dapm, "SPK"); + } + + snd_soc_dapm_sync(dapm); + + ret += sma1303_regmap_update_bits( + sma1303->regmap, component->dev, + SMA1303_00_SYSTEM_CTRL, + RESETBYI2C_MASK, RESETBYI2C_RESET); + + ret += regmap_read(sma1303->regmap, SMA1303_FF_DEVICE_INDEX, &status); + if (ret < 0) { + dev_err(sma1303->dev, + "failed to read, register: %02X, ret: %d\n", + SMA1303_FF_DEVICE_INDEX, ret); + return ret; + } + sma1303->rev_num = status & REV_NUM_STATUS; + if (sma1303->rev_num == REV_NUM_TV0) + dev_info(component->dev, "SMA1303 Trimming Version 0\n"); + else if (sma1303->rev_num == REV_NUM_TV1) + dev_info(component->dev, "SMA1303 Trimming Version 1\n"); + + ret += regmap_read(sma1303->regmap, SMA1303_FB_STATUS2, &otp_stat); + if (ret < 0) + dev_err(sma1303->dev, + "failed to read, register: %02X, ret: %d\n", + SMA1303_FF_DEVICE_INDEX, ret); + + if (((sma1303->rev_num == REV_NUM_TV0) && + ((otp_stat & 0x0E) == OTP_STAT_OK_0)) || + ((sma1303->rev_num != REV_NUM_TV0) && + ((otp_stat & 0x0C) == OTP_STAT_OK_1))) + dev_info(component->dev, "SMA1303 OTP Status Successful\n"); + else + dev_info(component->dev, "SMA1303 OTP Status Fail\n"); + + for (i = 0; i < (unsigned int)ARRAY_SIZE(sma1303_reg_def); i++) + ret += sma1303_regmap_write( + sma1303->regmap, component->dev, + sma1303_reg_def[i].reg, + sma1303_reg_def[i].def); + + ret += sma1303_regmap_write(sma1303->regmap, component->dev, + SMA1303_0A_SPK_VOL, sma1303->init_vol); + + dev_info(component->dev, + "%s init_vol is 0x%x\n", __func__, sma1303->init_vol); + + return ret; +} + +static void sma1303_remove(struct snd_soc_component *component) +{ + struct sma1303_priv *sma1303 = snd_soc_component_get_drvdata(component); + + cancel_delayed_work_sync(&sma1303->check_fault_work); +} + +static const struct snd_soc_component_driver sma1303_component = { + .probe = sma1303_probe, + .remove = sma1303_remove, + .suspend = sma1303_suspend, + .resume = sma1303_resume, + .controls = sma1303_snd_controls, + .num_controls = ARRAY_SIZE(sma1303_snd_controls), + .dapm_widgets = sma1303_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(sma1303_dapm_widgets), + .dapm_routes = sma1303_audio_map, + .num_dapm_routes = ARRAY_SIZE(sma1303_audio_map), +}; + +const struct regmap_config sma_i2c_regmap = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = SMA1303_FF_DEVICE_INDEX, + .readable_reg = sma1303_readable_register, + .writeable_reg = sma1303_writeable_register, + .volatile_reg = sma1303_volatile_register, + + .cache_type = REGCACHE_NONE, + .reg_defaults = sma1303_reg_def, + .num_reg_defaults = ARRAY_SIZE(sma1303_reg_def), +}; + +static ssize_t check_fault_period_show(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct sma1303_priv *sma1303 = dev_get_drvdata(dev); + int rc; + + rc = (int)snprintf(buf, PAGE_SIZE, + "%ld\n", sma1303->check_fault_period); + + return (ssize_t)rc; +} + +static ssize_t check_fault_period_store(struct device *dev, + struct device_attribute *devattr, const char *buf, size_t count) +{ + struct sma1303_priv *sma1303 = dev_get_drvdata(dev); + int ret; + + ret = kstrtol(buf, 10, &sma1303->check_fault_period); + + if (ret) + return -EINVAL; + + return (ssize_t)count; +} + +static DEVICE_ATTR_RW(check_fault_period); + +static ssize_t check_fault_status_show(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct sma1303_priv *sma1303 = dev_get_drvdata(dev); + int rc; + + rc = (int)snprintf(buf, PAGE_SIZE, + "%ld\n", sma1303->check_fault_status); + + return (ssize_t)rc; +} + +static ssize_t check_fault_status_store(struct device *dev, + struct device_attribute *devattr, const char *buf, size_t count) +{ + struct sma1303_priv *sma1303 = dev_get_drvdata(dev); + int ret; + + ret = kstrtol(buf, 10, &sma1303->check_fault_status); + + if (ret) + return -EINVAL; + + if (sma1303->check_fault_status) { + if (sma1303->check_fault_period > 0) + queue_delayed_work(system_freezable_wq, + &sma1303->check_fault_work, + sma1303->check_fault_period * HZ); + else + queue_delayed_work(system_freezable_wq, + &sma1303->check_fault_work, + CHECK_PERIOD_TIME * HZ); + } + + return (ssize_t)count; +} + +static DEVICE_ATTR_RW(check_fault_status); + +static struct attribute *sma1303_attr[] = { + &dev_attr_check_fault_period.attr, + &dev_attr_check_fault_status.attr, + NULL, +}; + +static struct attribute_group sma1303_attr_group = { + .attrs = sma1303_attr, +}; + +static int sma1303_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct sma1303_priv *sma1303; + struct device_node *np = client->dev.of_node; + int ret; + u32 value; + unsigned int device_info; + + dev_info(&client->dev, "%s is here. Driver version REV018\n", __func__); + + sma1303 = devm_kzalloc(&client->dev, sizeof(struct sma1303_priv), + GFP_KERNEL); + + if (!sma1303) + return -ENOMEM; + + sma1303->regmap = devm_regmap_init_i2c(client, &sma_i2c_regmap); + + if (IS_ERR(sma1303->regmap)) { + ret = PTR_ERR(sma1303->regmap); + dev_err(&client->dev, + "Failed to allocate register map: %d\n", ret); + + devm_kfree(&client->dev, sma1303); + + return ret; + } + + if (np) { + if (!of_property_read_u32(np, "tdm-slot-rx", &value)) { + dev_info(&client->dev, + "tdm slot rx is '%d' from DT\n", value); + sma1303->tdm_slot_rx = value; + } else { + dev_info(&client->dev, + "Default setting of tdm slot rx is '0'\n"); + sma1303->tdm_slot_rx = 0; + } + if (!of_property_read_u32(np, "tdm-slot-tx", &value)) { + dev_info(&client->dev, + "tdm slot tx is '%d' from DT\n", value); + sma1303->tdm_slot_tx = value; + } else { + dev_info(&client->dev, + "Default setting of tdm slot tx is '0'\n"); + sma1303->tdm_slot_tx = 0; + } + if (!of_property_read_u32(np, "sys-clk-id", &value)) { + switch (value) { + case SMA1303_EXTERNAL_CLOCK_19_2: + case SMA1303_EXTERNAL_CLOCK_24_576: + case SMA1303_PLL_CLKIN_MCLK: + dev_info(&client->dev, "MCLK is not supported\n"); + break; + case SMA1303_PLL_CLKIN_BCLK: + dev_info(&client->dev, + "Take an BCLK(SCK) and covert it to an internal PLL for use\n"); + break; + default: + dev_err(&client->dev, + "Invalid sys-clk-id: %d\n", value); + return -EINVAL; + } + sma1303->sys_clk_id = value; + } else { + dev_info(&client->dev, "Use the internal PLL clock by default\n"); + sma1303->sys_clk_id = SMA1303_PLL_CLKIN_BCLK; + } + } else { + dev_err(&client->dev, + "device node initialization error\n"); + devm_kfree(&client->dev, sma1303); + return -ENODEV; + } + + ret = regmap_read(sma1303->regmap, + SMA1303_FF_DEVICE_INDEX, &device_info); + + if ((ret != 0) || ((device_info & 0xF8) != DEVICE_ID)) { + dev_err(&client->dev, "device initialization error (%d 0x%02X)", + ret, device_info); + } + dev_info(&client->dev, "chip version 0x%02X\n", device_info); + + sma1303->last_over_temp = 0xC0; + sma1303->last_ocp_val = 0x0A; + sma1303->tsdw_cnt = 0; + sma1303->init_vol = 0x31; + sma1303->cur_vol = sma1303->init_vol; + sma1303->last_bclk = 0; + + INIT_DELAYED_WORK(&sma1303->check_fault_work, + sma1303_check_fault_worker); + + mutex_init(&sma1303->lock); + sma1303->check_fault_period = CHECK_PERIOD_TIME; + + sma1303->devtype = id->driver_data; + sma1303->dev = &client->dev; + sma1303->kobj = &client->dev.kobj; + + i2c_set_clientdata(client, sma1303); + + sma1303->amp_mode = ONE_CHIP_SOLUTION; + sma1303->usage_status = true; + sma1303->amp_power_status = false; + sma1303->check_fault_status = true; + sma1303->pll_matches = sma1303_pll_matches; + sma1303->num_of_pll_matches = + ARRAY_SIZE(sma1303_pll_matches); + + ret = devm_snd_soc_register_component(&client->dev, + &sma1303_component, sma1303_dai, 1); + + if (ret) { + dev_err(&client->dev, "Failed to register component"); + snd_soc_unregister_component(&client->dev); + + if (sma1303) + devm_kfree(&client->dev, sma1303); + + return ret; + } + + sma1303->attr_grp = &sma1303_attr_group; + ret = sysfs_create_group(sma1303->kobj, sma1303->attr_grp); + + if (ret) { + dev_err(&client->dev, + "failed to create attribute group [%d]\n", ret); + sma1303->attr_grp = NULL; + } + + return ret; +} + +static int sma1303_i2c_remove(struct i2c_client *client) +{ + struct sma1303_priv *sma1303 = + (struct sma1303_priv *) i2c_get_clientdata(client); + + cancel_delayed_work_sync(&sma1303->check_fault_work); + + snd_soc_unregister_component(&client->dev); + + if (sma1303) + devm_kfree(&client->dev, sma1303); + + return 0; +} + +static const struct i2c_device_id sma1303_i2c_id[] = { + {"sma1303", 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, sma1303_i2c_id); + +static const struct of_device_id sma1303_of_match[] = { + { .compatible = "irondevice,sma1303", }, + { } +}; +MODULE_DEVICE_TABLE(of, sma1303_of_match); + +static struct i2c_driver sma1303_i2c_driver = { + .driver = { + .name = "sma1303", + .of_match_table = sma1303_of_match, + }, + .probe = sma1303_i2c_probe, + .remove = sma1303_i2c_remove, + .id_table = sma1303_i2c_id, +}; + +static int __init sma1303_init(void) +{ + int ret; + + ret = i2c_add_driver(&sma1303_i2c_driver); + + if (ret) + pr_err("Failed to register sma1303 I2C driver: %d\n", ret); + + return ret; +} + +static void __exit sma1303_exit(void) +{ + i2c_del_driver(&sma1303_i2c_driver); +} + +module_init(sma1303_init); +module_exit(sma1303_exit); + +MODULE_DESCRIPTION("ALSA SoC SMA1303 driver"); +MODULE_AUTHOR("Gyuhwa Park, gyuhwa.park@irondevice.com"); +MODULE_AUTHOR("Kiseok Jo, kiseok.jo@irondevice.com"); +MODULE_LICENSE("GPL v2"); diff --git a/sound/soc/codecs/sma1303.h b/sound/soc/codecs/sma1303.h new file mode 100644 index 000000000000..d1fa2acaba85 --- /dev/null +++ b/sound/soc/codecs/sma1303.h @@ -0,0 +1,609 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later + * sma1303.h -- sma1303 ALSA SoC Audio driver + * + * Copyright 2022 Iron Device Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _SMA1303_H +#define _SMA1303_H + +#define SMA1303_I2C_ADDR_00 0x1e +#define SMA1303_I2C_ADDR_01 0x3e +#define SMA1303_I2C_ADDR_10 0x5e +#define SMA1303_I2C_ADDR_11 0x7e + +#define SMA1303_EXTERNAL_CLOCK_19_2 0x00 +#define SMA1303_EXTERNAL_CLOCK_24_576 0x01 +#define SMA1303_PLL_CLKIN_MCLK 0x02 +#define SMA1303_PLL_CLKIN_BCLK 0x03 + +#define ONE_CHIP_SOLUTION 0x00 +#define MONO_TWO_CHIP_SOLUTION 0x01 +#define LEFT_TWO_CHIP_SOLUTION 0x02 +#define RIGHT_TWO_CHIP_SOLUTION 0x03 + +/* + * SMA1303 Register Definition + */ + +/* SMA1303 Register Addresses */ +#define SMA1303_00_SYSTEM_CTRL 0x00 +#define SMA1303_01_INPUT1_CTRL1 0x01 +#define SMA1303_02_INPUT1_CTRL2 0x02 +#define SMA1303_03_INPUT1_CTRL3 0x03 +#define SMA1303_04_INPUT1_CTRL4 0x04 +/* 0x05 ~ 0x08 : Reserved */ +#define SMA1303_09_OUTPUT_CTRL 0x09 +#define SMA1303_0A_SPK_VOL 0x0a +#define SMA1303_0B_BST_TEST 0x0b +#define SMA1303_0C_BST_TEST1 0x0c +#define SMA1303_0D_SPK_TEST 0x0d +#define SMA1303_0E_MUTE_VOL_CTRL 0x0e +/* 0x0F : Reserved */ +#define SMA1303_10_SYSTEM_CTRL1 0x10 +#define SMA1303_11_SYSTEM_CTRL2 0x11 +#define SMA1303_12_SYSTEM_CTRL3 0x12 +/* 0x13 : Reserved */ +#define SMA1303_14_MODULATOR 0x14 +#define SMA1303_15_BASS_SPK1 0x15 +#define SMA1303_16_BASS_SPK2 0x16 +#define SMA1303_17_BASS_SPK3 0x17 +#define SMA1303_18_BASS_SPK4 0x18 +#define SMA1303_19_BASS_SPK5 0x19 +#define SMA1303_1A_BASS_SPK6 0x1a +#define SMA1303_1B_BASS_SPK7 0x1b +/* 0x1C ~ 0x22 : Reserved */ +#define SMA1303_23_COMP_LIM1 0x23 +#define SMA1303_24_COMP_LIM2 0x24 +#define SMA1303_25_COMP_LIM3 0x25 +#define SMA1303_26_COMP_LIM4 0x26 +/* 0x27 ~ 0x32 : Reserved */ +#define SMA1303_33_SDM_CTRL 0x33 +#define SMA1303_34_OTP_DATA1 0x34 +/* 0x35 : Reserved */ +#define SMA1303_36_PROTECTION 0x36 +#define SMA1303_37_SLOPE_CTRL 0x37 +#define SMA1303_38_OTP_TRM0 0x38 +/* 0x39 ~ 0x3A : Reserved */ +#define SMA1303_3B_TEST1 0x3b +#define SMA1303_3C_TEST2 0x3c +#define SMA1303_3D_TEST3 0x3d +#define SMA1303_3E_ATEST1 0x3e +#define SMA1303_3F_ATEST2 0x3f +/* 0x40 ~ 0x8A : Reserved */ +#define SMA1303_8B_PLL_POST_N 0x8b +#define SMA1303_8C_PLL_N 0x8c +#define SMA1303_8D_PLL_A_SETTING 0x8d +#define SMA1303_8E_PLL_CTRL 0x8e +#define SMA1303_8F_PLL_P_CP 0x8f +#define SMA1303_90_POSTSCALER 0x90 +#define SMA1303_91_CLASS_G_CTRL 0x91 +#define SMA1303_92_FDPEC_CTRL 0x92 +/* 0x93 : Reserved */ +#define SMA1303_94_BOOST_CTRL1 0x94 +#define SMA1303_95_BOOST_CTRL2 0x95 +#define SMA1303_96_BOOST_CTRL3 0x96 +#define SMA1303_97_BOOST_CTRL4 0x97 +/* 0x98 ~ 0x9F : Reserved */ +#define SMA1303_A0_PAD_CTRL0 0xa0 +#define SMA1303_A1_PAD_CTRL1 0xa1 +#define SMA1303_A2_TOP_MAN1 0xa2 +#define SMA1303_A3_TOP_MAN2 0xa3 +#define SMA1303_A4_TOP_MAN3 0xa4 +#define SMA1303_A5_TDM1 0xa5 +#define SMA1303_A6_TDM2 0xa6 +#define SMA1303_A7_CLK_MON 0xa7 +/* 0xA8 ~ 0xF9 : Reserved */ +#define SMA1303_FA_STATUS1 0xfa +#define SMA1303_FB_STATUS2 0xfb +/* 0xFC ~ 0xFE : Reserved */ +#define SMA1303_FF_DEVICE_INDEX 0xff + +/* SMA1303 Registers Bit Fields */ + +/* SYSTEM_CTRL : 0x00 */ +#define RESETBYI2C_MASK (1<<1) +#define RESETBYI2C_NORMAL (0<<1) +#define RESETBYI2C_RESET (1<<1) + +#define POWER_MASK (1<<0) +#define POWER_OFF (0<<0) +#define POWER_ON (1<<0) + +/* INTPUT CTRL1 : 0x01 */ +#define CONTROLLER_DEVICE_MASK (1<<7) +#define DEVICE_MODE (0<<7) +#define CONTROLLER_MODE (1<<7) + +#define I2S_MODE_MASK (7<<4) +#define STANDARD_I2S (0<<4) +#define LJ (1<<4) +#define RJ_16BIT (4<<4) +#define RJ_18BIT (5<<4) +#define RJ_20BIT (6<<4) +#define RJ_24BIT (7<<4) + +#define LEFTPOL_MASK (1<<3) +#define LOW_FIRST_CH (0<<3) +#define HIGH_FIRST_CH (1<<3) + +#define SCK_RISING_MASK (1<<2) +#define SCK_FALLING_EDGE (0<<2) +#define SCK_RISING_EDGE (1<<2) + +/* INTPUT CTRL2 : 0x02 */ +#define IMODE_MASK (3<<6) +#define I2S (0<<6) +#define PCM_SHORT (1<<6) +#define PCM_LONG (2<<6) + +#define RIGHT_FIRST_MASK (1<<5) +#define LEFT_NORMAL (0<<5) +#define RIGHT_INVERTED (1<<5) + +#define PCM_ALAW_MASK (1<<4) +#define PCM_U_DECODING (0<<4) +#define PCM_A_DECODING (1<<4) + +#define PCM_COMP_MASK (1<<3) +#define PCM_LINEAR (0<<3) +#define PCM_COMPANDING (1<<3) + +#define INPUTSEL_MASK (1<<2) +#define PCM_8KHZ (0<<2) +#define PCM_16KHZ (1<<2) + +#define PCM_STEREO_MASK (1<<1) +#define PCM_MONO (0<<1) +#define PCM_STEREO (1<<1) + +#define PCM_DL_MASK (1<<0) +#define PCM_8BIT (0<<0) +#define PCM_16BIT (1<<0) + +/* INTPUT CTRL3 : 0x03 */ +#define PCM_N_SLOT_MASK (15<<0) +#define PCM_N_SLOT1 (0<<0) +#define PCM_N_SLOT2 (1<<0) +#define PCM_N_SLOT3 (2<<0) +#define PCM_N_SLOT4 (3<<0) +#define PCM_N_SLOT5 (4<<0) +#define PCM_N_SLOT6 (5<<0) +#define PCM_N_SLOT7 (6<<0) +#define PCM_N_SLOT8 (7<<0) +#define PCM_N_SLOT9 (8<<0) +#define PCM_N_SLOT10 (9<<0) +#define PCM_N_SLOT11 (10<<0) +#define PCM_N_SLOT12 (11<<0) +#define PCM_N_SLOT13 (12<<0) +#define PCM_N_SLOT14 (13<<0) +#define PCM_N_SLOT15 (14<<0) +#define PCM_N_SLOT16 (15<<0) + +/* INTPUT CTRL4 : 0x04 */ +#define PCM1_SLOT_MASK (15<<4) +#define PCM1_SLOT1 (0<<4) +#define PCM1_SLOT2 (1<<4) +#define PCM1_SLOT3 (2<<4) +#define PCM1_SLOT4 (3<<4) +#define PCM1_SLOT5 (4<<4) +#define PCM1_SLOT6 (5<<4) +#define PCM1_SLOT7 (6<<4) +#define PCM1_SLOT8 (7<<4) +#define PCM1_SLOT9 (8<<4) +#define PCM1_SLOT10 (9<<4) +#define PCM1_SLOT11 (10<<4) +#define PCM1_SLOT12 (11<<4) +#define PCM1_SLOT13 (12<<4) +#define PCM1_SLOT14 (13<<4) +#define PCM1_SLOT15 (14<<4) +#define PCM1_SLOT16 (15<<4) + +#define PCM2_SLOT_MASK (15<<0) +#define PCM2_SLOT1 (0<<0) +#define PCM2_SLOT2 (1<<0) +#define PCM2_SLOT3 (2<<0) +#define PCM2_SLOT4 (3<<0) +#define PCM2_SLOT5 (4<<0) +#define PCM2_SLOT6 (5<<0) +#define PCM2_SLOT7 (6<<0) +#define PCM2_SLOT8 (7<<0) +#define PCM2_SLOT9 (8<<0) +#define PCM2_SLOT10 (9<<0) +#define PCM2_SLOT11 (10<<0) +#define PCM2_SLOT12 (11<<0) +#define PCM2_SLOT13 (12<<0) +#define PCM2_SLOT14 (13<<0) +#define PCM2_SLOT15 (14<<0) +#define PCM2_SLOT16 (15<<0) + +/* OUTPUT CTRL : 0x09 */ +#define PORT_CONFIG_MASK (3<<5) +#define INPUT_PORT_ONLY (0<<5) +#define OUTPUT_PORT_ENABLE (2<<5) + +#define PORT_OUT_SEL_MASK (7<<0) +#define OUT_SEL_DISABLE (0<<0) +#define FORMAT_CONVERTER (1<<0) +#define MIXER_OUTPUT (2<<0) +#define SPEAKER_PATH (3<<0) +#define POSTSCALER_OUTPUT (4<<0) + +/* BST_TEST : 0x0B */ +#define BST_OFF_SLOPE_MASK (3<<6) +#define BST_OFF_SLOPE_6_7ns (0<<6) +#define BST_OFF_SLOPE_4_8ns (1<<6) +#define BST_OFF_SLOPE_2_6ns (2<<6) +#define BST_OFF_SLOPE_1_2ns (3<<6) + +#define OCP_TEST_MASK (1<<5) +#define OCP_NORMAL_MODE (0<<5) +#define OCP_TEST_MODE (1<<5) + +#define BST_FAST_LEBN_MASK (1<<4) +#define BST_SHORT_LEB (0<<4) +#define BST_LONG_LEB (1<<4) + +#define HIGH_PGAIN_MASK (1<<3) +#define NORMAL_P_GAIN (0<<3) +#define HIGH_P_GAIN (1<<3) + +#define VCOMP_MASK (1<<2) +#define VCOMP_NORMAL_MODE (0<<2) +#define VCOMP_V_MON_MODE (1<<2) + +#define PMOS_ON_MASK (1<<1) +#define PMOS_NORMAL_MODE (0<<1) +#define PMOS_TEST_MODE (1<<1) + +#define NMOS_ON_MASK (1<<0) +#define NMOS_NORMAL_MODE (0<<0) +#define NMOS_TEST_MODE (1<<0) + +/* BST_TEST1 : 0x0C */ +#define SET_OCP_H_MASK (3<<6) +#define HIGH_OCP_4_5_LVL (0<<6) +#define HIGH_OCP_3_2_LVL (1<<6) +#define HIGH_OCP_2_1_LVL (2<<6) +#define HIGH_OCP_0_9_LVL (3<<6) + +#define OCL_TEST_MASK (1<<5) +#define OCL_NORMAL_MODE (0<<5) +#define OCL_TEST_MODE (1<<5) + +#define LOOP_CHECK_MASK (1<<4) +#define BST_LOOP_NORMAL_MODE (0<<4) +#define BST_LOOP_CHECK_MODE (1<<4) + +#define EN_SH_PRT_MASK (1<<3) +#define EN_SH_PRT_DISABLE (0<<3) +#define EN_SH_PRT_ENABLE (1<<3) + +/* SPK_TEST : 0x0D */ +#define VREF_MON_MASK (1<<3) +#define VREF_NORMAL_MODE (0<<3) +#define VREF_V_MON_MODE (1<<3) + +#define SPK_OCP_DLYN_MASK (1<<2) +#define SPK_OCP_LONG_DELAY (0<<2) +#define SPK_OCP_NORMAL (1<<2) + +#define SPK_OFF_SLOPE_MASK (3<<0) +#define SPK_OFF_SLOPE_SLOW (0<<0) +#define SPK_OFF_SLOPE_FAST (3<<0) + +/* MUTE_VOL_CTRL : 0x0E */ +#define VOL_SLOPE_MASK (3<<6) +#define VOL_SLOPE_OFF (0<<6) +#define VOL_SLOPE_SLOW (1<<6) +#define VOL_SLOPE_MID (2<<6) +#define VOL_SLOPE_FAST (3<<6) + +#define MUTE_SLOPE_MASK (3<<4) +#define MUTE_SLOPE_OFF (0<<4) +#define MUTE_SLOPE_SLOW (1<<4) +#define MUTE_SLOPE_MID (2<<4) +#define MUTE_SLOPE_FAST (3<<4) + +#define SPK_MUTE_MASK (1<<0) +#define SPK_UNMUTE (0<<0) +#define SPK_MUTE (1<<0) + +/* SYSTEM_CTRL1 :0x10 */ +#define SPK_MODE_MASK (7<<2) +#define SPK_OFF (0<<2) +#define SPK_MONO (1<<2) +#define SPK_STEREO (4<<2) + +/* SYSTEM_CTRL2 : 0x11 */ +#define SPK_BS_MASK (1<<6) +#define SPK_BS_BYP (0<<6) +#define SPK_BS_EN (1<<6) +#define SPK_LIM_MASK (1<<5) +#define SPK_LIM_BYP (0<<5) +#define SPK_LIM_EN (1<<5) + +#define LR_DATA_SW_MASK (1<<4) +#define LR_DATA_SW_NORMAL (0<<4) +#define LR_DATA_SW_SWAP (1<<4) + +#define MONOMIX_MASK (1<<0) +#define MONOMIX_OFF (0<<0) +#define MONOMIX_ON (1<<0) + +/* SYSTEM_CTRL3 : 0x12 */ +#define INPUT_MASK (3<<6) +#define INPUT_0_DB (0<<6) +#define INPUT_M6_DB (1<<6) +#define INPUT_M12_DB (2<<6) +#define INPUT_INFI_DB (3<<6) +#define INPUT_R_MASK (3<<4) +#define INPUT_R_0_DB (0<<4) +#define INPUT_R_M6_DB (1<<4) +#define INPUT_R_M12_DB (2<<4) +#define INPUT_R_INFI_DB (3<<4) + +/* Modulator : 0x14 */ +#define SPK_HYSFB_MASK (3<<6) +#define HYSFB_625K (0<<6) +#define HYSFB_414K (1<<6) +#define HYSFB_297K (2<<6) +#define HYSFB_226K (3<<6) +#define SPK_BDELAY_MASK (63<<0) + +/* SDM CONTROL : 0x33 */ +#define SDM_Q_SEL_MASK (1<<2) +#define QUART_SEL_1_DIV_4 (0<<2) +#define QUART_SEL_1_DIV_8 (1<<2) + +/* OTP_DATA1 : 0x34 */ +#define OTP_LVL_MASK (1<<5) +#define OTP_LVL_NORMAL (0<<5) +#define OTP_LVL_LOW (1<<5) + +/* PROTECTION : 0x36 */ +#define EDGE_DIS_MASK (1<<7) +#define EDGE_DIS_ENABLE (0<<7) +#define EDGE_DIS_DISABLE (1<<7) + +#define SPK_OCP_DIS_MASK (1<<3) +#define SPK_OCP_ENABLE (0<<3) +#define SPK_OCP_DISABLE (1<<3) + +#define OCP_MODE_MASK (1<<2) +#define AUTO_RECOVER (0<<2) +#define SHUT_DOWN_PERMANENT (1<<2) + +#define OTP_MODE_MASK (3<<0) +#define OTP_MODE_DISABLE (0<<0) +#define IG_THR1_SHUT_THR2 (1<<0) +#define REC_THR1_SHUT_THR2 (2<<0) +#define SHUT_THR1_SHUT_THR2 (3<<0) + +/* TEST2 : 0x3C */ +#define SPK_HSDM_BP_MASK (1<<4) +#define SPK_HSDM_ENABLE (0<<4) +#define SPK_HSDM_BYPASS (1<<4) + +#define SDM_SYNC_DIS_MASK (1<<5) +#define SDM_SYNC_NORMAL (0<<5) +#define SDM_SYNC_DISABLE (1<<5) + +/* ATEST2 : 0x3F */ +#define SPK_OUT_FREQ_MASK (1<<2) +#define SPK_OUT_FREQ_360K (0<<2) +#define SPK_OUT_FREQ_410K (1<<2) + +#define LOW_POWER_MODE_MASK (1<<3) +#define LOW_POWER_MODE_DISABLE (0<<3) +#define LOW_POWER_MODE_ENABLE (1<<3) + +#define THERMAL_ADJUST_MASK (3<<5) +#define THERMAL_150_110 (0<<5) +#define THERMAL_160_120 (1<<5) +#define THERMAL_140_100 (2<<5) + +#define FAST_OFF_DRIVE_SPK_MASK (1<<0) +#define FAST_OFF_DRIVE_SPK_DISABLE (0<<0) +#define FAST_OFF_DRIVE_SPK_ENABLE (1<<0) + +/* PLL_CTRL : 0x8E */ +#define TRM_LVL_MASK (1<<4) +#define TRM_LVL_NORMAL (0<<4) +#define TRM_LVL_LOW (1<<4) + +#define LOW_OCL_MODE_MASK (1<<3) +#define LOW_OCL_MODE (0<<3) +#define NORMAL_OCL_MODE (1<<3) + +#define PLL_PD2_MASK (7<<0) +#define PLL_PD2 (7<<0) +#define PLL_OPERATION2 (0<<0) + +/* POSTSCALER : 0x90 */ +#define BYP_POST_MASK (1<<0) +#define EN_POST_SCALER (0<<0) +#define BYP_POST_SCALER (1<<0) + +/* FDPEC CONTROL : 0x92 */ +#define FLT_VDD_GAIN_MASK (15<<4) +#define FLT_VDD_GAIN_2P40 (0<<4) +#define FLT_VDD_GAIN_2P45 (1<<4) +#define FLT_VDD_GAIN_2P50 (2<<4) +#define FLT_VDD_GAIN_2P55 (3<<4) +#define FLT_VDD_GAIN_2P60 (4<<4) +#define FLT_VDD_GAIN_2P65 (5<<4) +#define FLT_VDD_GAIN_2P70 (6<<4) +#define FLT_VDD_GAIN_2P75 (7<<4) +#define FLT_VDD_GAIN_2P80 (8<<4) +#define FLT_VDD_GAIN_2P85 (9<<4) +#define FLT_VDD_GAIN_2P90 (10<<4) +#define FLT_VDD_GAIN_2P95 (11<<4) +#define FLT_VDD_GAIN_3P00 (12<<4) +#define FLT_VDD_GAIN_3P05 (13<<4) +#define FLT_VDD_GAIN_3P10 (14<<4) +#define FLT_VDD_GAIN_3P15 (15<<4) + +#define DIS_FCHG_MASK (1<<2) +#define EN_FAST_CHARGE (0<<2) +#define DIS_FAST_CHARGE (1<<2) + +/* BOOST_CONTROL4 : 0x97 */ +#define TRM_VBST_MASK (7<<2) +#define TRM_VBST_5P5 (0<<2) +#define TRM_VBST_5P6 (1<<2) +#define TRM_VBST_5P7 (2<<2) +#define TRM_VBST_5P8 (3<<2) +#define TRM_VBST_5P9 (4<<2) +#define TRM_VBST_6P0 (5<<2) +#define TRM_VBST_6P1 (6<<2) +#define TRM_VBST_6P2 (7<<2) + +/* TOP_MAN1 : 0xA2 */ +#define PLL_LOCK_SKIP_MASK (1<<7) +#define PLL_LOCK_ENABLE (0<<7) +#define PLL_LOCK_DISABLE (1<<7) + +#define PLL_PD_MASK (1<<6) +#define PLL_OPERATION (0<<6) +#define PLL_PD (1<<6) + +#define PLL_DIV_MASK (3<<4) +#define PLL_OUT (0<<4) +#define PLL_OUT_2 (1<<4) +#define PLL_OUT_4 (2<<4) +#define PLL_OUT_8 (3<<4) + +#define PLL_REF_CLK_MASK (1<<3) +#define PLL_REF_CLK1 (0<<3) +#define PLL_SCK (1<<3) + +#define DAC_DN_CONV_MASK (1<<2) +#define DAC_DN_CONV_DISABLE (0<<2) +#define DAC_DN_CONV_ENABLE (1<<2) + +#define SDO_IO_MASK (1<<1) +#define HIGH_Z_LRCK_H (0<<1) +#define HIGH_Z_LRCK_L (1<<1) + +#define SDO_OUTPUT2_MASK (1<<0) +#define SDO_NORMAL (0<<0) +#define SDO_OUTPUT_ONLY (1<<0) + +/* TOP_MAN2 : 0xA3 */ +#define MON_OSC_PLL_MASK (1<<7) +#define PLL_SDO (0<<7) +#define PLL_OSC (1<<7) + +#define TEST_CLKO_EN_MASK (1<<6) +#define NORMAL_SDO (0<<6) +#define CLK_OUT_SDO (1<<6) + +#define SDO_OUTPUT_MASK (1<<3) +#define NORMAL_OUT (0<<3) +#define HIGH_Z_OUT (1<<3) + +#define CLOCK_MON_MASK (1<<1) +#define CLOCK_MON (0<<1) +#define CLOCK_NOT_MON (1<<1) + +#define OSC_PD_MASK (1<<0) +#define NORMAL_OPERATION_OSC (0<<0) +#define POWER_DOWN_OSC (1<<0) + +/* TOP_MAN3 0xA4 */ +#define O_FORMAT_MASK (7<<5) +#define O_FMT_LJ (1<<5) +#define O_FMT_I2S (2<<5) +#define O_FMT_TDM (4<<5) + +#define SCK_RATE_MASK (1<<3) +#define SCK_64FS (0<<3) +#define SCK_32FS (2<<3) + +#define LRCK_POL_MASK (1<<0) +#define L_VALID (0<<0) +#define R_VALID (1<<0) + +/* TDM1 FORMAT : 0xA5 */ +#define TDM_CLK_POL_MASK (1<<7) +#define TDM_CLK_POL_RISE (0<<7) +#define TDM_CLK_POL_FALL (1<<7) + +#define TDM_TX_MODE_MASK (1<<6) +#define TDM_TX_MONO (0<<6) +#define TDM_TX_STEREO (1<<6) + +#define TDM_SLOT1_RX_POS_MASK (7<<3) +#define TDM_SLOT1_RX_POS_0 (0<<3) +#define TDM_SLOT1_RX_POS_1 (1<<3) +#define TDM_SLOT1_RX_POS_2 (2<<3) +#define TDM_SLOT1_RX_POS_3 (3<<3) +#define TDM_SLOT1_RX_POS_4 (4<<3) +#define TDM_SLOT1_RX_POS_5 (5<<3) +#define TDM_SLOT1_RX_POS_6 (6<<3) +#define TDM_SLOT1_RX_POS_7 (7<<3) + +#define TDM_SLOT2_RX_POS_MASK (7<<0) +#define TDM_SLOT2_RX_POS_0 (0<<0) +#define TDM_SLOT2_RX_POS_1 (1<<0) +#define TDM_SLOT2_RX_POS_2 (2<<0) +#define TDM_SLOT2_RX_POS_3 (3<<0) +#define TDM_SLOT2_RX_POS_4 (4<<0) +#define TDM_SLOT2_RX_POS_5 (5<<0) +#define TDM_SLOT2_RX_POS_6 (6<<0) +#define TDM_SLOT2_RX_POS_7 (7<<0) + +/* TDM2 FORMAT : 0xA6 */ +#define TDM_DL_MASK (1<<7) +#define TDM_DL_16 (0<<7) +#define TDM_DL_32 (1<<7) + +#define TDM_N_SLOT_MASK (1<<6) +#define TDM_N_SLOT_4 (0<<6) +#define TDM_N_SLOT_8 (1<<6) + +#define TDM_SLOT1_TX_POS_MASK (7<<3) +#define TDM_SLOT1_TX_POS_0 (0<<3) +#define TDM_SLOT1_TX_POS_1 (1<<3) +#define TDM_SLOT1_TX_POS_2 (2<<3) +#define TDM_SLOT1_TX_POS_3 (3<<3) +#define TDM_SLOT1_TX_POS_4 (4<<3) +#define TDM_SLOT1_TX_POS_5 (5<<3) +#define TDM_SLOT1_TX_POS_6 (6<<3) +#define TDM_SLOT1_TX_POS_7 (7<<3) + +#define TDM_SLOT2_TX_POS_MASK (7<<0) +#define TDM_SLOT2_TX_POS_0 (0<<0) +#define TDM_SLOT2_TX_POS_1 (1<<0) +#define TDM_SLOT2_TX_POS_2 (2<<0) +#define TDM_SLOT2_TX_POS_3 (3<<0) +#define TDM_SLOT2_TX_POS_4 (4<<0) +#define TDM_SLOT2_TX_POS_5 (5<<0) +#define TDM_SLOT2_TX_POS_6 (6<<0) +#define TDM_SLOT2_TX_POS_7 (7<<0) + +/* STATUS1 : 0xFA */ +#define OT1_OK_STATUS (1<<7) +#define OT2_OK_STATUS (1<<6) + +/* STATUS2 : 0xFB */ +#define OCP_SPK_STATUS (1<<5) +#define OCP_BST_STATUS (1<<4) +#define OTP_STAT_OK_0 (5<<1) +#define OTP_STAT_OK_1 (2<<2) + +#define CLK_MON_STATUS (1<<0) + +/* DEVICE_INFO : 0xFF */ +#define DEVICE_ID (2<<3) +#define UVLO_BST_STATUS (1<<2) +#define REV_NUM_STATUS (3<<0) +#define REV_NUM_TV0 (0<<0) +#define REV_NUM_TV1 (1<<0) + +#endif

This adds the schema binding for the Iron Device SMA1303 amplifier.

Signed-off-by: Kiseok Jo kiseok.jo@irondevice.com --- .../bindings/sound/irondevice,sma1303.yaml | 40 +++++++++++++++++++ .../devicetree/bindings/vendor-prefixes.yaml | 2 + 2 files changed, 42 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/irondevice,sma1303.yaml

diff --git a/Documentation/devicetree/bindings/sound/irondevice,sma1303.yaml b/Documentation/devicetree/bindings/sound/irondevice,sma1303.yaml new file mode 100644 index 000000000000..8c3b85f962ff --- /dev/null +++ b/Documentation/devicetree/bindings/sound/irondevice,sma1303.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/irondevice,sma1303.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Iron Device SMA1303 Audio Amplifier + +maintainers: + - Kiseok Jo kiseok.jo@irondevice.com + +description: + SMA1303 digital class-D audio amplifier with an integrated boost converter. + +allOf: + - $ref: name-prefix.yaml# + +properties: + compatible: + const: irondevice,sma1303 + + reg: + description: + I2C address of the amplifier. See the datasheet for possible values. + +required: + - compatible + - reg + +additionalProperties: true + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c_bus { + sma1303_amp: sma1303@1e { + compatible = "irondevice,sma1303"; + reg = <0x1e>; + }; + }; \ No newline at end of file diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 2f0151e9f6be..00ade1489f62 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -621,6 +621,8 @@ patternProperties: description: Inverse Path "^iom,.*": description: Iomega Corporation + "^irondevice,.*": + description: Iron Device Corporation "^isee,.*": description: ISEE 2007 S.L. "^isil,.*":