-------- Forwarded Message -------- From: Peter Matthias PeterMatthias@web.de To: Tobin Davis tdavis@dsl-only.net Subject: Re: [alsa-devel] default setting not fully working with new ALSA device Date: Thu, 5 Jul 2007 18:34:08 +0200

The Board is a MSI K9AGM2-FIH, Sockel AM2, ATI RS690G, mATX, PCIe

The script gave following output: "Your ALSA information is located at http://pastebin.ca/604529"

Other drivers are statically linked in my kernel.

Thank you for your work! In case of any questions, contact me.

Peter

Am Mittwoch, 4. Juli 2007 schrieben Sie:

Could you post the output from http://bulletproof.servebeer.com/alsa/scripts/alsa-info.sh ? This script will give us more detailed information on what sound chip it is. We will also need to know the brand of board, for the driver file.

Thanks,

Tobin

On Wed, 2007-07-04 at 16:48 +0200, Peter Matthias wrote:

...

Hello,

I have got a 690G board with following lspic -nv output:

01:05.2 0403: 1002:7919 Subsystem: 1002:7919 Flags: bus master, fast devsel, latency 64, IRQ 19 Memory at fe9e8000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-

With the default setting, microphone does not work. With module parameter "modprobe -i snd-hda-intel model=6stack-dig" microphone works well. Please add to default setting. It was written in Linux Kernel documentation to report this issue here.

Thank you, Peter _______________________________________________ Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel