[PATCH v2] dt-bindings: soundwire: Convert text file to yaml format

18 Oct 2022

Update soundwire bindings with yaml formats.
Signed-off-by: Srinivasa Rao Mandadapu quic_srivasam@quicinc.com
Co-developed-by: Ratna Deepthi Kudaravalli quic_rkudarav@quicinc.com
Signed-off-by: Ratna Deepthi Kudaravalli quic_rkudarav@quicinc.com
---
This patch depends on:
    https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?i...
Changes since V1:
  -- Remove the status field in example.
  -- Remove interrupt-names property in the required list.
  -- Add the wakeup-source property.
.../devicetree/bindings/soundwire/qcom,sdw.txt     | 214 ---------------------
 .../devicetree/bindings/soundwire/qcom,sdw.yaml    | 186 ++++++++++++++++++
 2 files changed, 186 insertions(+), 214 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/soundwire/qcom,sdw.txt
 create mode 100644 Documentation/devicetree/bindings/soundwire/qcom,sdw.yaml

diff --git a/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt b/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt
deleted file mode 100644
index c85c257..0000000
--- a/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt
+++ /dev/null
@@ -1,214 +0,0 @@
-Qualcomm SoundWire Controller Bindings
-
-
-This binding describes the Qualcomm SoundWire Controller along with its
-board specific bus parameters.
-
-- compatible:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be "qcom,soundwire-v<MAJOR>.<MINOR>.<STEP>",
-		    Example:
-			"qcom,soundwire-v1.3.0"
-			"qcom,soundwire-v1.5.0"
-			"qcom,soundwire-v1.5.1"
-			"qcom,soundwire-v1.6.0"
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: the base address and size of SoundWire controller
-		    address space.
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: should specify the SoundWire Controller core and optional
-		    wake IRQ
-
-- interrupt-names:
-	Usage: Optional
-	Value type: boolean
-	Value type: <stringlist>
-	Definition: should be "core" for core and "wakeup" for wake interrupt.
-
-- wakeup-source:
-	Usage: Optional
-	Value type: boolean
-	Definition: should specify if SoundWire Controller is wake up capable.
-
-- clock-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: should be "iface" for SoundWire Controller interface clock
-
-- clocks:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: should specify the SoundWire Controller interface clock
-
-- #sound-dai-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: must be 1 for digital audio interfaces on the controller.
-
-- qcom,dout-ports:
-	Usage: required
-	Value type: <u32>
-	Definition: must be count of data out ports
-
-- qcom,din-ports:
-	Usage: required
-	Value type: <u32>
-	Definition: must be count of data in ports
-
-- qcom,ports-offset1:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: should specify payload transport window offset1 of each
-		    data port. Out ports followed by In ports.
-		    Value of 0xFF indicates that this option is not implemented
-		    or applicable for the respective data port.
-		    More info in MIPI Alliance SoundWire 1.0 Specifications.
-
-- qcom,ports-offset2:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: should specify payload transport window offset2 of each
-		    data port. Out ports followed by In ports.
-		    Value of 0xFF indicates that this option is not implemented
-		    or applicable for the respective data port.
-		    More info in MIPI Alliance SoundWire 1.0 Specifications.
-
-- qcom,ports-sinterval-low:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: should be sample interval low of each data port.
-		    Out ports followed by In ports. Used for Sample Interval
-		    calculation.
-		    Value of 0xFF indicates that this option is not implemented
-		    or applicable for the respective data port.
-		    More info in MIPI Alliance SoundWire 1.0 Specifications.
-
-- qcom,ports-word-length:
-	Usage: optional
-	Value type: <prop-encoded-array>
-	Definition: should be size of payload channel sample.
-		    Value of 0xFF indicates that this option is not implemented
-		    or applicable for the respective data port.
-		    More info in MIPI Alliance SoundWire 1.0 Specifications.
-
-- qcom,ports-block-pack-mode:
-	Usage: optional
-	Value type: <prop-encoded-array>
-	Definition: should be 0 or 1 to indicate the block packing mode.
-		    0 to indicate Blocks are per Channel
-		    1 to indicate Blocks are per Port.
-		    Out ports followed by In ports.
-		    Value of 0xFF indicates that this option is not implemented
-		    or applicable for the respective data port.
-		    More info in MIPI Alliance SoundWire 1.0 Specifications.
-
-- qcom,ports-block-group-count:
-	Usage: optional
-	Value type: <prop-encoded-array>
-	Definition: should be in range 1 to 4 to indicate how many sample
-		    intervals are combined into a payload.
-		    Out ports followed by In ports.
-		    Value of 0xFF indicates that this option is not implemented
-		    or applicable for the respective data port.
-		    More info in MIPI Alliance SoundWire 1.0 Specifications.
-
-- qcom,ports-lane-control:
-	Usage: optional
-	Value type: <prop-encoded-array>
-	Definition: should be in range 0 to 7 to identify which	data lane
-		    the data port uses.
-		    Out ports followed by In ports.
-		    Value of 0xFF indicates that this option is not implemented
-		    or applicable for the respective data port.
-		    More info in MIPI Alliance SoundWire 1.0 Specifications.
-
-- qcom,ports-hstart:
-	Usage: optional
-	Value type: <prop-encoded-array>
-	Definition: should be number identifying lowerst numbered coloum in
-		    SoundWire Frame, i.e. left edge of the Transport sub-frame
-		    for each port. Values between 0 and 15 are valid.
-		    Out ports followed by In ports.
-		    Value of 0xFF indicates that this option is not implemented
-		    or applicable for the respective data port.
-		    More info in MIPI Alliance SoundWire 1.0 Specifications.
-
-- qcom,ports-hstop:
-	Usage: optional
-	Value type: <prop-encoded-array>
-	Definition: should be number identifying highest numbered coloum in
-		    SoundWire Frame, i.e. the right edge of the Transport
-		    sub-frame for each port. Values between 0 and 15 are valid.
-		    Out ports followed by In ports.
-		    Value of 0xFF indicates that this option is not implemented
-		    or applicable for the respective data port.
-		    More info in MIPI Alliance SoundWire 1.0 Specifications.
-
-- qcom,dports-type:
-	Usage: optional
-	Value type: <prop-encoded-array>
-	Definition: should be one of the following types
-		    0 for reduced port
-		    1 for simple ports
-		    2 for full port
-		    Out ports followed by In ports.
-		    Value of 0xFF indicates that this option is not implemented
-		    or applicable for the respective data port.
-		    More info in MIPI Alliance SoundWire 1.0 Specifications.
-
-- reset:
-	Usage: optional
-	Value type: <prop-encoded-array>
-	Definition: Should specify the SoundWire audio CSR reset controller interface,
-		    which is required for SoundWire version 1.6.0 and above.
-
-- reset-names:
-	Usage: optional
-	Value type: <stringlist>
-	Definition: should be "swr_audio_cgcr" for SoundWire audio CSR reset
-		    controller interface.
-
-Note:
-	More Information on detail of encoding of these fields can be
-found in MIPI Alliance SoundWire 1.0 Specifications.
-
-= SoundWire devices
-Each subnode of the bus represents SoundWire device attached to it.
-The properties of these nodes are defined by the individual bindings.
-
-= EXAMPLE
-The following example represents a SoundWire controller on DB845c board
-which has controller integrated inside WCD934x codec on SDM845 SoC.
-
-soundwire: soundwire@c85 {
-	compatible = "qcom,soundwire-v1.3.0";
-	reg = <0xc85 0x20>;
-	interrupts = <20 IRQ_TYPE_EDGE_RISING>;
-	clocks = <&wcc>;
-	clock-names = "iface";
-	resets = <&lpass_audiocc LPASS_AUDIO_SWR_TX_CGCR>;
-	reset-names = "swr_audio_cgcr";
-	#sound-dai-cells = <1>;
-	qcom,dports-type = <0>;
-	qcom,dout-ports	= <6>;
-	qcom,din-ports	= <2>;
-	qcom,ports-sinterval-low = /bits/ 8  <0x07 0x1F 0x3F 0x7 0x1F 0x3F 0x0F 0x0F>;
-	qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0C 0x6 0x12 0x0D 0x07 0x0A >;
-	qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x1F 0x00 0x00 0x1F 0x00 0x00>;
-
-	/* Left Speaker */
-	left{
-		....
-	};
-
-	/* Right Speaker */
-	right{
-		....
-	};
-};
diff --git a/Documentation/devicetree/bindings/soundwire/qcom,sdw.yaml b/Documentation/devicetree/bindings/soundwire/qcom,sdw.yaml
new file mode 100644
index 0000000..65bff91
--- /dev/null
+++ b/Documentation/devicetree/bindings/soundwire/qcom,sdw.yaml
@@ -0,0 +1,186 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soundwire/qcom,sdw.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SoundWire Controller
+
+maintainers:
+  - Srinivas Kandagatla srinivas.kandagatla@linaro.org
+  - Srinivasa Rao Mandadapu quic_srivasam@quicinc.com
+
+description:
+  This binding describes the Qualcomm SoundWire controller along with its
+  board specific bus parameters.
+
+properties:
+  compatible:
+    enum:
+      - qcom,soundwire-v1.3.0
+      - qcom,soundwire-v1.5.0
+      - qcom,soundwire-v1.5.1
+      - qcom,soundwire-v1.6.0
+
+  reg:
+    items:
+      - description: the base address and size of SoundWire controller
+                   address space.
+
+  interrupts:
+    items:
+      - description: specify the SoundWire controller core and optional
+                   wake IRQ.
+
+  interrupt-names:
+    items:
+      - const: wakeup
+
+  clocks:
+    items:
+      - description: iface clock
+
+  clock-names:
+    items:
+      - const: iface
+
+  resets:
+    items:
+      - description: SWR_AUDIO_CGCR RESET
+
+  reset-names:
+    items:
+      - const: swr_audio_cgcr
+
+  '#sound-dai-cells':
+    const: 1
+
+  '#address-cells':
+    const: 2
+
+  '#size-cells':
+    const: 0
+
+  wakeup-source:
+    description: specify the Soundwire Controller is wakeup Capable.
+    type: boolean
+
+  qcom,din-ports:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: count of data in ports
+
+  qcom,dout-ports:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: count of data out ports
+
+  qcom,ports-word-length:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: size of payload channel sample.
+    minItems: 5
+    maxItems: 5
+
+  qcom,ports-sinterval-low:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: sample interval low of each data port.
+    minItems: 5
+    maxItems: 5
+
+  qcom,ports-offset1:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: payload transport window offset1 of each data port.
+    minItems: 5
+    maxItems: 5
+
+  qcom,ports-offset2:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: payload transport window offset2 of each data port.
+    minItems: 5
+    maxItems: 5
+
+  qcom,ports-lane-control:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: identify which data lane the data port uses.
+    minItems: 5
+    maxItems: 5
+
+  qcom,ports-block-pack-mode:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: indicate the block packing mode.
+    minItems: 5
+    maxItems: 5
+
+  qcom,ports-hstart:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: identifying lowerst numbered coloum in SoundWire frame.
+    minItems: 5
+    maxItems: 5
+
+  qcom,ports-hstop:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: identifying highest numbered coloum in SoundWire frame.
+    minItems: 5
+    maxItems: 5
+
+  qcom,ports-block-group-count:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: indicate how many sample intervals are combined into a payload.
+    minItems: 5
+    maxItems: 5
+
+required:
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - '#sound-dai-cells'
+  - '#address-cells'
+  - '#size-cells'
+  - qcom,dout-ports
+  - qcom,din-ports
+  - qcom,ports-word-length
+  - qcom,ports-sinterval-low
+  - qcom,ports-offset1
+  - qcom,ports-offset2
+  - qcom,ports-lane-control
+  - qcom,ports-block-pack-mode
+  - qcom,ports-hstart
+  - qcom,ports-block-group-count
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
+
+    soundwire@3210000 {
+        compatible = "qcom,soundwire-v1.6.0";
+        reg = <0x03210000 0x2000>;
+
+        interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&lpass_rx_macro>;
+        clock-names = "iface";
+
+        qcom,din-ports = <0>;
+        qcom,dout-ports = <5>;
+
+        resets = <&lpass_audiocc LPASS_AUDIO_SWR_RX_CGCR>;
+        reset-names = "swr_audio_cgcr";
+
+        qcom,ports-word-length =        /bits/ 8 <0x01 0x07 0x04 0xff 0xff>;
+        qcom,ports-sinterval-low =      /bits/ 8 <0x03 0x3f 0x1f 0x03 0x03>;
+        qcom,ports-offset1 =            /bits/ 8 <0x00 0x00 0x0b 0x01 0x01>;
+        qcom,ports-offset2 =            /bits/ 8 <0x00 0x00 0x0b 0x00 0x00>;
+        qcom,ports-lane-control =       /bits/ 8 <0x01 0x00 0x00 0x00 0x00>;
+        qcom,ports-block-pack-mode =    /bits/ 8 <0xff 0x00 0x01 0xff 0xff>;
+        qcom,ports-hstart =             /bits/ 8 <0xff 0x03 0xff 0xff 0xff>;
+        qcom,ports-hstop =              /bits/ 8 <0xff 0x06 0xff 0xff 0xff>;
+        qcom,ports-block-group-count =  /bits/ 8 <0xff 0xff 0xff 0xff 0x00>;
+
+        #sound-dai-cells = <1>;
+        #address-cells = <2>;
+        #size-cells = <0>;
+    };
-- 
2.7.4


    

Srinivasa Rao Mandadapu

Krzysztof Kozlowski

Srinivasa Rao Mandadapu

Vinod Koul

Srinivasa Rao Mandadapu

tags (0)

participants (3)