[alsa-devel] [PATCH] ASoC: sun4i-codec: use consistent names for PA controls
The power amplifier for the headphone output is called "the PA" and "the headphone amplifier" in Allwinner's documentation for the A10 and A20. sun4i-codec calls it "PA" in some places and "Pre-Amplifier" (which isn't really accurate) in others, leading to user-visible controls with different names referring to the same device.
When this driver implements audio input, it'll also need to expose controls for the line and mic input preamps, so just referring to "the Pre-Amplifier" will be ambiguous.
Change it to use "PA" consistently for the power amplifier.
Signed-off-by: Adam Sampson ats@offog.org --- sound/soc/sunxi/sun4i-codec.c | 23 ++++++++++++----------- 1 file changed, 12 insertions(+), 11 deletions(-)
diff --git a/sound/soc/sunxi/sun4i-codec.c b/sound/soc/sunxi/sun4i-codec.c index bcbf4da..ff3304d 100644 --- a/sound/soc/sunxi/sun4i-codec.c +++ b/sound/soc/sunxi/sun4i-codec.c @@ -2,6 +2,7 @@ * Copyright 2014 Emilio López emilio@elopez.com.ar * Copyright 2014 Jon Smirl jonsmirl@gmail.com * Copyright 2015 Maxime Ripard maxime.ripard@free-electrons.com + * Copyright 2015 Adam Sampson ats@offog.org * * Based on the Allwinner SDK driver, released under the GPL. * @@ -452,12 +453,12 @@ static const struct snd_soc_dapm_widget sun4i_codec_dapm_widgets[] = { SND_SOC_DAPM_SUPPLY("Mixer Enable", SUN4I_CODEC_DAC_ACTL, SUN4I_CODEC_DAC_ACTL_MIXEN, 0, NULL, 0),
- /* Pre-Amplifier */ - SND_SOC_DAPM_MIXER("Pre-Amplifier", SUN4I_CODEC_ADC_ACTL, + /* Headphone output power amplifier */ + SND_SOC_DAPM_MIXER("PA", SUN4I_CODEC_ADC_ACTL, SUN4I_CODEC_ADC_ACTL_PA_EN, 0, sun4i_codec_pa_mixer_controls, ARRAY_SIZE(sun4i_codec_pa_mixer_controls)), - SND_SOC_DAPM_SWITCH("Pre-Amplifier Mute", SND_SOC_NOPM, 0, 0, + SND_SOC_DAPM_SWITCH("PA Mute", SND_SOC_NOPM, 0, 0, &sun4i_codec_pa_mute),
SND_SOC_DAPM_OUTPUT("HP Right"), @@ -480,16 +481,16 @@ static const struct snd_soc_dapm_route sun4i_codec_dapm_routes[] = { { "Left Mixer", NULL, "Mixer Enable" }, { "Left Mixer", "Left DAC Playback Switch", "Left DAC" },
- /* Pre-Amplifier Mixer Routes */ - { "Pre-Amplifier", "Mixer Playback Switch", "Left Mixer" }, - { "Pre-Amplifier", "Mixer Playback Switch", "Right Mixer" }, - { "Pre-Amplifier", "DAC Playback Switch", "Left DAC" }, - { "Pre-Amplifier", "DAC Playback Switch", "Right DAC" }, + /* PA Mixer Routes */ + { "PA", "Mixer Playback Switch", "Left Mixer" }, + { "PA", "Mixer Playback Switch", "Right Mixer" }, + { "PA", "DAC Playback Switch", "Left DAC" }, + { "PA", "DAC Playback Switch", "Right DAC" },
/* PA -> HP path */ - { "Pre-Amplifier Mute", "Switch", "Pre-Amplifier" }, - { "HP Right", NULL, "Pre-Amplifier Mute" }, - { "HP Left", NULL, "Pre-Amplifier Mute" }, + { "PA Mute", "Switch", "PA" }, + { "HP Right", NULL, "PA Mute" }, + { "HP Left", NULL, "PA Mute" }, };
static struct snd_soc_codec_driver sun4i_codec_codec = {
Hi,
On Sat, Oct 24, 2015 at 01:11:52PM +0100, Adam Sampson wrote:
The power amplifier for the headphone output is called "the PA" and "the headphone amplifier" in Allwinner's documentation for the A10 and A20. sun4i-codec calls it "PA" in some places and "Pre-Amplifier" (which isn't really accurate) in others, leading to user-visible controls with different names referring to the same device.
When this driver implements audio input, it'll also need to expose controls for the line and mic input preamps, so just referring to "the Pre-Amplifier" will be ambiguous.
Change it to use "PA" consistently for the power amplifier.
Just to avoid any ambiguity in the future, could you call that Power Amp(lifier?) instead?
Thanks! Maxime
participants (2)
-
Adam Sampson
-
Maxime Ripard