The WM8993 only supports I2C so don't ifdef the I2C support in the driver.

Signed-off-by: Mark Brown broonie@opensource.wolfsonmicro.com --- sound/soc/codecs/wm8993.c | 6 ------ 1 files changed, 0 insertions(+), 6 deletions(-)

diff --git a/sound/soc/codecs/wm8993.c b/sound/soc/codecs/wm8993.c index b64fb91..36562ed 100644 --- a/sound/soc/codecs/wm8993.c +++ b/sound/soc/codecs/wm8993.c @@ -1654,7 +1654,6 @@ static struct snd_soc_codec_driver soc_codec_dev_wm8993 = { .set_bias_level = wm8993_set_bias_level, };

-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) static __devinit int wm8993_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { @@ -1758,27 +1757,22 @@ static struct i2c_driver wm8993_i2c_driver = { .remove = __devexit_p(wm8993_i2c_remove), .id_table = wm8993_i2c_id, }; -#endif

static int __init wm8993_modinit(void) { int ret = 0; -#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) ret = i2c_add_driver(&wm8993_i2c_driver); if (ret != 0) { pr_err("WM8993: Unable to register I2C driver: %d\n", ret); } -#endif return ret; } module_init(wm8993_modinit);

static void __exit wm8993_exit(void) { -#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) i2c_del_driver(&wm8993_i2c_driver); -#endif } module_exit(wm8993_exit);