[PATCH] arm64: dts: SC7280: Remove unused sleep pin control nodes
Remove Unused and redundant sleep pin control entries in herobrine device tree variants.
Signed-off-by: Srinivasa Rao Mandadapu quic_srivasam@quicinc.com --- .../qcom/sc7280-herobrine-audio-rt5682-3mic.dtsi | 8 ----- .../dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi | 20 ----------- arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 20 ----------- arch/arm64/boot/dts/qcom/sc7280.dtsi | 40 ---------------------- 4 files changed, 88 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682-3mic.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682-3mic.dtsi index cf34334..1ca11a1 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682-3mic.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682-3mic.dtsi @@ -148,10 +148,6 @@ hp_i2c: &i2c2 { bias-disable; };
-&lpass_dmic01_clk_sleep { - drive-strength = <2>; -}; - &lpass_dmic01_data { bias-pull-down; }; @@ -161,10 +157,6 @@ hp_i2c: &i2c2 { bias-disable; };
-&lpass_dmic23_clk_sleep { - drive-strength = <2>; -}; - &lpass_dmic23_data { bias-pull-down; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi index c72e53a..ae25520 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi @@ -167,10 +167,6 @@ bias-disable; };
-&lpass_dmic01_clk_sleep { - drive-strength = <2>; -}; - &lpass_dmic01_data { bias-pull-down; }; @@ -180,10 +176,6 @@ bias-disable; };
-&lpass_dmic23_clk_sleep { - drive-strength = <2>; -}; - &lpass_dmic23_data { bias-pull-down; }; @@ -194,30 +186,18 @@ bias-disable; };
-&lpass_rx_swr_clk_sleep { - bias-pull-down; -}; - &lpass_rx_swr_data { drive-strength = <2>; slew-rate = <1>; bias-bus-hold; };
-&lpass_rx_swr_data_sleep { - bias-pull-down; -}; - &lpass_tx_swr_clk { drive-strength = <2>; slew-rate = <1>; bias-disable; };
-&lpass_tx_swr_clk_sleep { - bias-pull-down; -}; - &lpass_tx_swr_data { drive-strength = <2>; slew-rate = <1>; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi index 8ca2281..f7efb99 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi @@ -576,10 +576,6 @@ bias-disable; };
-&lpass_dmic01_clk_sleep { - drive-strength = <2>; -}; - &lpass_dmic01_data { bias-pull-down; }; @@ -589,10 +585,6 @@ bias-disable; };
-&lpass_dmic23_clk_sleep { - drive-strength = <2>; -}; - &lpass_dmic23_data { bias-pull-down; }; @@ -603,30 +595,18 @@ bias-disable; };
-&lpass_rx_swr_clk_sleep { - bias-pull-down; -}; - &lpass_rx_swr_data { drive-strength = <2>; slew-rate = <1>; bias-bus-hold; };
-&lpass_rx_swr_data_sleep { - bias-pull-down; -}; - &lpass_tx_swr_clk { drive-strength = <2>; slew-rate = <1>; bias-disable; };
-&lpass_tx_swr_clk_sleep { - bias-pull-down; -}; - &lpass_tx_swr_data { drive-strength = <2>; slew-rate = <1>; diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 448879d..4970864 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -2483,80 +2483,40 @@ function = "dmic1_clk"; };
- lpass_dmic01_clk_sleep: dmic01-clk-sleep-state { - pins = "gpio6"; - function = "dmic1_clk"; - }; - lpass_dmic01_data: dmic01-data-state { pins = "gpio7"; function = "dmic1_data"; };
- lpass_dmic01_data_sleep: dmic01-data-sleep-state { - pins = "gpio7"; - function = "dmic1_data"; - }; - lpass_dmic23_clk: dmic23-clk-state { pins = "gpio8"; function = "dmic2_clk"; };
- lpass_dmic23_clk_sleep: dmic23-clk-sleep-state { - pins = "gpio8"; - function = "dmic2_clk"; - }; - lpass_dmic23_data: dmic23-data-state { pins = "gpio9"; function = "dmic2_data"; };
- lpass_dmic23_data_sleep: dmic23-data-sleep-state { - pins = "gpio9"; - function = "dmic2_data"; - }; - lpass_rx_swr_clk: rx-swr-clk-state { pins = "gpio3"; function = "swr_rx_clk"; };
- lpass_rx_swr_clk_sleep: rx-swr-clk-sleep-state { - pins = "gpio3"; - function = "swr_rx_clk"; - }; - lpass_rx_swr_data: rx-swr-data-state { pins = "gpio4", "gpio5"; function = "swr_rx_data"; };
- lpass_rx_swr_data_sleep: rx-swr-data-sleep-state { - pins = "gpio4", "gpio5"; - function = "swr_rx_data"; - }; - lpass_tx_swr_clk: tx-swr-clk-state { pins = "gpio0"; function = "swr_tx_clk"; };
- lpass_tx_swr_clk_sleep: tx-swr-clk-sleep-state { - pins = "gpio0"; - function = "swr_tx_clk"; - }; - lpass_tx_swr_data: tx-swr-data-state { pins = "gpio1", "gpio2", "gpio14"; function = "swr_tx_data"; }; - - lpass_tx_swr_data_sleep: tx-swr-data-sleep-state { - pins = "gpio1", "gpio2", "gpio14"; - function = "swr_tx_data"; - }; };
gpu: gpu@3d00000 {
On 15/11/2022 12:09, Srinivasa Rao Mandadapu wrote:
Remove Unused and redundant sleep pin control entries in herobrine device tree variants.
And these are redundant because... ? E.g. not referenced anywhere thus not used?
Use subject prefixes matching the subsystem (git log --oneline -- ...).
Best regards, Krzysztof
participants (2)
-
Krzysztof Kozlowski
-
Srinivasa Rao Mandadapu