[alsa-devel] [PATCH 0/4] ASoC/OMAP: ASoC machine driver for simple SoC with twl4030
Hello,
Create new unified ASoC machine driver (with DT support) for boards using simple configuration for audio and using the twl4030 codec. This driver will replace the following machine drivers (since they are basically the same): igep0020, omap3beagle, omap3evm and overo.
This series will switch the boards I can identify to use the new unified ASoC machine driver.
Changes under arch/arm/mach-omap2/ are trivial, I don't expect merge issues later. If it is OK for the maintainers I would like this to go via audio tree (with the McBSP and the twl4030-audio stack DT support).
The series has been tested on BeagleBoard (with the McBSP and twl4030-audio DT support).
Regards, Peter --- Peter Ujfalusi (4): ASoC: omap-twl4030: Simple machine driver for TI SoC with twl4030 codec ARM: OMAP: twl-common: Add helper function to register the omap-twl4030 audio driver ARM: OMAP3: Switch to use the unified audio driver (omap-twl4030) for selected boards ASoC: Remove obsolete OMAP3 machine drivers
.../devicetree/bindings/sound/omap-twl4030.txt | 19 ++ arch/arm/mach-omap2/board-cm-t35.c | 1 + arch/arm/mach-omap2/board-devkit8000.c | 1 + arch/arm/mach-omap2/board-igep0020.c | 1 + arch/arm/mach-omap2/board-omap3beagle.c | 1 + arch/arm/mach-omap2/board-omap3evm.c | 1 + arch/arm/mach-omap2/board-overo.c | 1 + arch/arm/mach-omap2/twl-common.c | 28 +++ arch/arm/mach-omap2/twl-common.h | 2 + include/linux/platform_data/omap-twl4030.h | 33 +++ sound/soc/omap/Kconfig | 48 ++--- sound/soc/omap/Makefile | 10 +- sound/soc/omap/igep0020.c | 120 ----------- sound/soc/omap/omap-twl4030.c | 219 ++++++++++++++++++++ sound/soc/omap/omap3beagle.c | 150 ------------- sound/soc/omap/omap3evm.c | 118 ----------- sound/soc/omap/overo.c | 122 ----------- 17 files changed, 322 insertions(+), 553 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/omap-twl4030.txt create mode 100644 include/linux/platform_data/omap-twl4030.h delete mode 100644 sound/soc/omap/igep0020.c create mode 100644 sound/soc/omap/omap-twl4030.c delete mode 100644 sound/soc/omap/omap3beagle.c delete mode 100644 sound/soc/omap/omap3evm.c delete mode 100644 sound/soc/omap/overo.c
Machine driver to handle simple devices using twl4030 as audio codec. The driver supports the following boards: - Beagleboard or Devkit8000 - Gumstix Overo or CompuLab CM-T35/CM-T3730 - IGEP v2 - OMAP3EVM
All of these boards can be switched to use this driver since their setup is identical. Devicetree support for the omap-twl4030 machine driver also implemented.
Signed-off-by: Peter Ujfalusi peter.ujfalusi@ti.com --- .../devicetree/bindings/sound/omap-twl4030.txt | 19 ++ include/linux/platform_data/omap-twl4030.h | 33 +++ sound/soc/omap/Kconfig | 13 ++ sound/soc/omap/Makefile | 2 + sound/soc/omap/omap-twl4030.c | 219 ++++++++++++++++++++ 5 files changed, 286 insertions(+), 0 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/omap-twl4030.txt create mode 100644 include/linux/platform_data/omap-twl4030.h create mode 100644 sound/soc/omap/omap-twl4030.c
diff --git a/Documentation/devicetree/bindings/sound/omap-twl4030.txt b/Documentation/devicetree/bindings/sound/omap-twl4030.txt new file mode 100644 index 0000000..02e4e4e --- /dev/null +++ b/Documentation/devicetree/bindings/sound/omap-twl4030.txt @@ -0,0 +1,19 @@ +* Texas Instruments SoC with twl4030 based audio setups + +Required properties: +- compatible: "ti,omap-twl4030" +- ti,model: Name of the sound card (for example "omap3beagle") +- ti,codec_sysclk: Sysclk frequency of twl4030 codec +- ti,mcbsp: phandle for the McBSP node +- ti,codec: phandle for the twl4030 audio node + +Example: + +sound { + compatible = "ti,omap-twl4030"; + ti,model = "omap3beagle"; + + ti,mcbsp = <&mcbsp2>; + ti,codec = <&twl_audio>; + ti,codec_sysclk = <26000000>; +}; diff --git a/include/linux/platform_data/omap-twl4030.h b/include/linux/platform_data/omap-twl4030.h new file mode 100644 index 0000000..ee68473 --- /dev/null +++ b/include/linux/platform_data/omap-twl4030.h @@ -0,0 +1,33 @@ +/** + * omap-twl4030.h - ASoC machine driver for TI SoC based boards with twl4030 + * codec, header. + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com + * All rights reserved. + * + * Author: Peter Ujfalusi peter.ujfalusi@ti.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef _OMAP_TWL4030_H_ +#define _OMAP_TWL4030_H_ + +struct omap_tw4030_pdata { + const char *card_name; + int codec_sysclk; +}; + +#endif /* _OMAP_TWL4030_H_ */ diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig index 57a2fa7..fc83d74 100644 --- a/sound/soc/omap/Kconfig +++ b/sound/soc/omap/Kconfig @@ -95,6 +95,19 @@ config SND_OMAP_SOC_SDP3430 Say Y if you want to add support for SoC audio on Texas Instruments SDP3430.
+config SND_OMAP_SOC_OMAP_TWL4030 + tristate "SoC Audio support for TI SoC based boards with twl4030 codec" + depends on TWL4030_CORE && SND_OMAP_SOC + select SND_OMAP_SOC_MCBSP + select SND_SOC_TWL4030 + help + Say Y if you want to add support for SoC audio on TI SoC based boards + using twl4030 as c codec. This driver currently supports: + - Beagleboard or Devkit8000 + - Gumstix Overo or CompuLab CM-T35/CM-T3730 + - IGEP v2 + - OMAP3EVM + config SND_OMAP_SOC_OMAP_ABE_TWL6040 tristate "SoC Audio support for OMAP boards using ABE and twl6040 codec" depends on TWL6040_CORE && SND_OMAP_SOC && ARCH_OMAP4 diff --git a/sound/soc/omap/Makefile b/sound/soc/omap/Makefile index 0e14dd3..861e640 100644 --- a/sound/soc/omap/Makefile +++ b/sound/soc/omap/Makefile @@ -21,6 +21,7 @@ snd-soc-omap3evm-objs := omap3evm.o snd-soc-am3517evm-objs := am3517evm.o snd-soc-sdp3430-objs := sdp3430.o snd-soc-omap-abe-twl6040-objs := omap-abe-twl6040.o +snd-soc-omap-twl4030-objs := omap-twl4030.o snd-soc-omap3pandora-objs := omap3pandora.o snd-soc-omap3beagle-objs := omap3beagle.o snd-soc-zoom2-objs := zoom2.o @@ -37,6 +38,7 @@ obj-$(CONFIG_SND_OMAP_SOC_OMAP3EVM) += snd-soc-omap3evm.o obj-$(CONFIG_SND_OMAP_SOC_AM3517EVM) += snd-soc-am3517evm.o obj-$(CONFIG_SND_OMAP_SOC_SDP3430) += snd-soc-sdp3430.o obj-$(CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040) += snd-soc-omap-abe-twl6040.o +obj-$(CONFIG_SND_OMAP_SOC_OMAP_TWL4030) += snd-soc-omap-twl4030.o obj-$(CONFIG_SND_OMAP_SOC_OMAP3_PANDORA) += snd-soc-omap3pandora.o obj-$(CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE) += snd-soc-omap3beagle.o obj-$(CONFIG_SND_OMAP_SOC_ZOOM2) += snd-soc-zoom2.o diff --git a/sound/soc/omap/omap-twl4030.c b/sound/soc/omap/omap-twl4030.c new file mode 100644 index 0000000..22ec08d --- /dev/null +++ b/sound/soc/omap/omap-twl4030.c @@ -0,0 +1,219 @@ +/* + * omap-twl4030.c -- SoC audio for TI SoC based boards with twl4030 codec + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com + * All rights reserved. + * + * Author: Peter Ujfalusi peter.ujfalusi@ti.com + * + * This driver replaces the following machine drivers: + * omap3beagle (Author: Steve Sakoman steve@sakoman.com) + * omap3evm (Author: Anuj Aggarwal anuj.aggarwal@ti.com) + * overo (Author: Steve Sakoman steve@sakoman.com) + * igep0020 (Author: Enric Balletbo i Serra eballetbo@iseebcn.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include <linux/platform_device.h> +#include <linux/platform_data/omap-twl4030.h> +#include <linux/module.h> +#include <linux/of.h> + +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/soc.h> + +#include "omap-mcbsp.h" +#include "omap-pcm.h" + +struct omap_twl4030_priv { + int codec_sysclk; +}; + +static int omap_twl4030_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->codec_dai; + struct snd_soc_dai *cpu_dai = rtd->cpu_dai; + struct snd_soc_codec *codec = rtd->codec; + struct snd_soc_card *card = codec->card; + struct omap_twl4030_priv *priv = snd_soc_card_get_drvdata(card); + unsigned int fmt; + int ret; + + switch (params_channels(params)) { + case 2: /* Stereo I2S mode */ + fmt = SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBM_CFM; + break; + case 4: /* Four channel TDM mode */ + fmt = SND_SOC_DAIFMT_DSP_A | + SND_SOC_DAIFMT_IB_NF | + SND_SOC_DAIFMT_CBM_CFM; + break; + default: + return -EINVAL; + } + + /* Set codec DAI configuration */ + ret = snd_soc_dai_set_fmt(codec_dai, fmt); + if (ret < 0) { + dev_err(card->dev, "can't set codec DAI configuration\n"); + return ret; + } + + /* Set cpu DAI configuration */ + ret = snd_soc_dai_set_fmt(cpu_dai, fmt); + if (ret < 0) { + dev_err(card->dev, "can't set cpu DAI configuration\n"); + return ret; + } + + /* Set the codec system clock for DAC and ADC */ + ret = snd_soc_dai_set_sysclk(codec_dai, 0, priv->codec_sysclk, + SND_SOC_CLOCK_IN); + if (ret < 0) { + dev_err(card->dev, "can't set codec system clock\n"); + return ret; + } + + return 0; +} + +static struct snd_soc_ops omap_twl4030_ops = { + .hw_params = omap_twl4030_hw_params, +}; + +/* Digital audio interface glue - connects codec <--> CPU */ +static struct snd_soc_dai_link omap_twl4030_dai_links[] = { + { + .name = "TWL4030", + .stream_name = "TWL4030", + .cpu_dai_name = "omap-mcbsp.2", + .codec_dai_name = "twl4030-hifi", + .platform_name = "omap-pcm-audio", + .codec_name = "twl4030-codec", + .ops = &omap_twl4030_ops, + }, +}; + +/* Audio machine driver */ +static struct snd_soc_card omap_twl4030_card = { + .owner = THIS_MODULE, + .dai_link = omap_twl4030_dai_links, + .num_links = ARRAY_SIZE(omap_twl4030_dai_links), +}; + +static __devinit int omap_twl4030_probe(struct platform_device *pdev) +{ + struct omap_tw4030_pdata *pdata = dev_get_platdata(&pdev->dev); + struct device_node *node = pdev->dev.of_node; + struct snd_soc_card *card = &omap_twl4030_card; + struct omap_twl4030_priv *priv; + int ret = 0; + + card->dev = &pdev->dev; + + priv = devm_kzalloc(&pdev->dev, sizeof(struct omap_twl4030_priv), + GFP_KERNEL); + if (priv == NULL) + return -ENOMEM; + + if (node) { + struct device_node *dai_node; + + if (snd_soc_of_parse_card_name(card, "ti,model")) { + dev_err(&pdev->dev, "Card name is not provided\n"); + return -ENODEV; + } + + dai_node = of_parse_phandle(node, "ti,mcbsp", 0); + if (!dai_node) { + dev_err(&pdev->dev, "McBSP node is not provided\n"); + return -EINVAL; + } + omap_twl4030_dai_links[0].cpu_dai_name = NULL; + omap_twl4030_dai_links[0].cpu_of_node = dai_node; + + of_property_read_u32(node, "ti,codec_sysclk", + &priv->codec_sysclk); + } else if (pdata) { + if (pdata->card_name) { + card->name = pdata->card_name; + } else { + dev_err(&pdev->dev, "Card name is not provided\n"); + return -ENODEV; + } + + priv->codec_sysclk = pdata->codec_sysclk; + } else { + dev_err(&pdev->dev, "Missing pdata\n"); + return -ENODEV; + } + + + if (!priv->codec_sysclk) { + dev_err(&pdev->dev, "Codec sysclk frequency missing\n"); + return -ENODEV; + } + + snd_soc_card_set_drvdata(card, priv); + + ret = snd_soc_register_card(card); + if (ret) { + dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", + ret); + return ret; + } + + return 0; +} + +static int __devexit omap_twl4030_remove(struct platform_device *pdev) +{ + struct snd_soc_card *card = platform_get_drvdata(pdev); + + snd_soc_unregister_card(card); + + return 0; +} + +static const struct of_device_id omap_twl4030_of_match[] = { + {.compatible = "ti,omap-twl4030", }, + { }, +}; +MODULE_DEVICE_TABLE(of, omap_twl4030_of_match); + +static struct platform_driver omap_twl4030_driver = { + .driver = { + .name = "omap-twl4030", + .owner = THIS_MODULE, + .pm = &snd_soc_pm_ops, + .of_match_table = omap_twl4030_of_match, + }, + .probe = omap_twl4030_probe, + .remove = __devexit_p(omap_twl4030_remove), +}; + +module_platform_driver(omap_twl4030_driver); + +MODULE_AUTHOR("Peter Ujfalusi peter.ujfalusi@ti.com"); +MODULE_DESCRIPTION("ALSA SoC for TI SoC based boards with twl4030 codec"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:omap-twl4030");
Since several OMAP3 based boards will be using the unified simple audio driver it is better to not have duplicated code in the board files for this purpose. Board files can call omap_twl4030_audio_init(); to set up the needed device for the audio support.
For example: omap_twl4030_audio_init("omap3beagle", 26000000);
Signed-off-by: Peter Ujfalusi peter.ujfalusi@ti.com --- arch/arm/mach-omap2/twl-common.c | 28 ++++++++++++++++++++++++++++ arch/arm/mach-omap2/twl-common.h | 2 ++ 2 files changed, 30 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index d52be85..639ea02 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -522,3 +522,31 @@ void __init omap4_pmic_get_config(struct twl4030_platform_data *pmic_data, pmic_data->v2v1 = &omap4_v2v1_idata; } #endif /* CONFIG_ARCH_OMAP4 */ + +#if defined(CONFIG_SND_OMAP_SOC_OMAP_TWL4030) || \ + defined(CONFIG_SND_OMAP_SOC_OMAP_TWL4030_MODULE) +#include <linux/platform_data/omap-twl4030.h> + +static struct omap_tw4030_pdata omap_twl4030_audio_data; + +static struct platform_device audio_device = { + .name = "omap-twl4030", + .id = -1, + .dev = { + .platform_data = &omap_twl4030_audio_data, + }, +}; + +void __init omap_twl4030_audio_init(char *card_name, int codec_sysclk) +{ + omap_twl4030_audio_data.card_name = card_name; + omap_twl4030_audio_data.codec_sysclk = codec_sysclk; + platform_device_register(&audio_device); +} + +#else /* SOC_OMAP_TWL4030 */ +void __init omap_twl4030_audio_init(char *card_name, int codec_sysclk) +{ + return; +} +#endif /* SOC_OMAP_TWL4030 */ diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h index de062c7..b774c19 100644 --- a/arch/arm/mach-omap2/twl-common.h +++ b/arch/arm/mach-omap2/twl-common.h @@ -60,4 +60,6 @@ void omap3_pmic_get_config(struct twl4030_platform_data *pmic_data, void omap4_pmic_get_config(struct twl4030_platform_data *pmic_data, u32 pdata_flags, u32 regulators_flags);
+void omap_twl4030_audio_init(char *card_name, int codec_sysclk); + #endif /* __OMAP_PMIC_COMMON__ */
* Peter Ujfalusi peter.ujfalusi@ti.com [120808 02:54]:
Since several OMAP3 based boards will be using the unified simple audio driver it is better to not have duplicated code in the board files for this purpose. Board files can call omap_twl4030_audio_init(); to set up the needed device for the audio support.
For example: omap_twl4030_audio_init("omap3beagle", 26000000);
Acked-by: Tony Lindgren tony@atomide.com
These boards have similar audio setup and they can all use the same driver for audio support if it is enabled in the kernel config.
Signed-off-by: Peter Ujfalusi peter.ujfalusi@ti.com --- arch/arm/mach-omap2/board-cm-t35.c | 1 + arch/arm/mach-omap2/board-devkit8000.c | 1 + arch/arm/mach-omap2/board-igep0020.c | 1 + arch/arm/mach-omap2/board-omap3beagle.c | 1 + arch/arm/mach-omap2/board-omap3evm.c | 1 + arch/arm/mach-omap2/board-overo.c | 1 + 6 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 97d7190..b73fa5c 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -731,6 +731,7 @@ static void __init cm_t3x_common_init(void) cm_t35_init_ethernet(); cm_t35_init_led(); cm_t35_init_display(); + omap_twl4030_audio_init("overo", 26000000);
usb_musb_init(NULL); cm_t35_init_usbh(); diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 6567c1c..f834b3e 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -630,6 +630,7 @@ static void __init devkit8000_init(void) usbhs_init(&usbhs_bdata); omap_nand_flash_init(NAND_BUSWIDTH_16, devkit8000_nand_partitions, ARRAY_SIZE(devkit8000_nand_partitions)); + omap_twl4030_audio_init("omap3beagle", 26000000);
/* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 7491529..bc7c1ea 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -626,6 +626,7 @@ static void __init igep_init(void)
igep_flash_init(); igep_leds_init(); + omap_twl4030_audio_init("igep2", 26000000);
/* * WLAN-BT combo module from MuRata which has a Marvell WLAN diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 6202fc7..dd6e4f0 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -519,6 +519,7 @@ static void __init omap3_beagle_init(void) usbhs_init(&usbhs_bdata); omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions, ARRAY_SIZE(omap3beagle_nand_partitions)); + omap_twl4030_audio_init("omap3beagle", 26000000);
/* Ensure msecure is mux'd to be able to set the RTC. */ omap_mux_init_signal("sys_drm_msecure", OMAP_PIN_OFF_OUTPUT_HIGH); diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index ef230a0..1be8f6e 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -736,6 +736,7 @@ static void __init omap3_evm_init(void) omap3evm_init_smsc911x(); omap3_evm_display_init(); omap3_evm_wl12xx_init(); + omap_twl4030_audio_init("omap3evm", 26000000); }
MACHINE_START(OMAP3EVM, "OMAP3 EVM") diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 779734d..7b7db3d 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -509,6 +509,7 @@ static void __init overo_init(void) overo_display_init(); overo_init_led(); overo_init_keys(); + omap_twl4030_audio_init("overo", 26000000);
/* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
* Peter Ujfalusi peter.ujfalusi@ti.com [120808 02:54]:
These boards have similar audio setup and they can all use the same driver for audio support if it is enabled in the kernel config.
After the naming changes suggested by Igor:
Acked-by: Tony Lindgren tony@atomide.com
The new omap-twl4030 handles the boards used the following drivers: igep0020, omap3beagle, omap3evm and overo. Remove these drivers since they are mostly identical and we already have drop in replacement for all of them.
Note: Earlier patch added the needed code for the board files to retain the audio support for boards I can identify that used one of the removed drivers. If I missed something please take a look at for example: arch/arm/mach-omap2/board-omap3beagle.c on how add support for omap-twl4030 audio.
Signed-off-by: Peter Ujfalusi peter.ujfalusi@ti.com --- sound/soc/omap/Kconfig | 35 ---------- sound/soc/omap/Makefile | 8 -- sound/soc/omap/igep0020.c | 120 --------------------------------- sound/soc/omap/omap3beagle.c | 150 ------------------------------------------ sound/soc/omap/omap3evm.c | 118 --------------------------------- sound/soc/omap/overo.c | 122 ---------------------------------- 6 files changed, 0 insertions(+), 553 deletions(-) delete mode 100644 sound/soc/omap/igep0020.c delete mode 100644 sound/soc/omap/omap3beagle.c delete mode 100644 sound/soc/omap/omap3evm.c delete mode 100644 sound/soc/omap/overo.c
diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig index fc83d74..2c484a5 100644 --- a/sound/soc/omap/Kconfig +++ b/sound/soc/omap/Kconfig @@ -60,23 +60,6 @@ config SND_OMAP_SOC_OSK5912 help Say Y if you want to add support for SoC audio on osk5912.
-config SND_OMAP_SOC_OVERO - tristate "SoC Audio support for Gumstix Overo and CompuLab CM-T35" - depends on TWL4030_CORE && SND_OMAP_SOC && (MACH_OVERO || MACH_CM_T35) - select SND_OMAP_SOC_MCBSP - select SND_SOC_TWL4030 - help - Say Y if you want to add support for SoC audio on the - Gumstix Overo or CompuLab CM-T35 - -config SND_OMAP_SOC_OMAP3EVM - tristate "SoC Audio support for OMAP3EVM board" - depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP3EVM - select SND_OMAP_SOC_MCBSP - select SND_SOC_TWL4030 - help - Say Y if you want to add support for SoC audio on the omap3evm board. - config SND_OMAP_SOC_AM3517EVM tristate "SoC Audio support for OMAP3517 / AM3517 EVM" depends on SND_OMAP_SOC && MACH_OMAP3517EVM && I2C @@ -140,16 +123,6 @@ config SND_OMAP_SOC_OMAP3_PANDORA help Say Y if you want to add support for SoC audio on the OMAP3 Pandora.
-config SND_OMAP_SOC_OMAP3_BEAGLE - tristate "SoC Audio support for OMAP3 Beagle and Devkit8000" - depends on TWL4030_CORE && SND_OMAP_SOC - depends on (MACH_OMAP3_BEAGLE || MACH_DEVKIT8000) - select SND_OMAP_SOC_MCBSP - select SND_SOC_TWL4030 - help - Say Y if you want to add support for SoC audio on the Beagleboard or - the clone Devkit8000. - config SND_OMAP_SOC_ZOOM2 tristate "SoC Audio support for Zoom2" depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP_ZOOM2 @@ -157,11 +130,3 @@ config SND_OMAP_SOC_ZOOM2 select SND_SOC_TWL4030 help Say Y if you want to add support for Soc audio on Zoom2 board. - -config SND_OMAP_SOC_IGEP0020 - tristate "SoC Audio support for IGEP v2" - depends on TWL4030_CORE && SND_OMAP_SOC && MACH_IGEP0020 - select SND_OMAP_SOC_MCBSP - select SND_SOC_TWL4030 - help - Say Y if you want to add support for Soc audio on IGEP v2 board. diff --git a/sound/soc/omap/Makefile b/sound/soc/omap/Makefile index 861e640..19637e5 100644 --- a/sound/soc/omap/Makefile +++ b/sound/soc/omap/Makefile @@ -16,31 +16,23 @@ snd-soc-n810-objs := n810.o snd-soc-rx51-objs := rx51.o snd-soc-ams-delta-objs := ams-delta.o snd-soc-osk5912-objs := osk5912.o -snd-soc-overo-objs := overo.o -snd-soc-omap3evm-objs := omap3evm.o snd-soc-am3517evm-objs := am3517evm.o snd-soc-sdp3430-objs := sdp3430.o snd-soc-omap-abe-twl6040-objs := omap-abe-twl6040.o snd-soc-omap-twl4030-objs := omap-twl4030.o snd-soc-omap3pandora-objs := omap3pandora.o -snd-soc-omap3beagle-objs := omap3beagle.o snd-soc-zoom2-objs := zoom2.o -snd-soc-igep0020-objs := igep0020.o snd-soc-omap-hdmi-card-objs := omap-hdmi-card.o
obj-$(CONFIG_SND_OMAP_SOC_N810) += snd-soc-n810.o obj-$(CONFIG_SND_OMAP_SOC_RX51) += snd-soc-rx51.o obj-$(CONFIG_SND_OMAP_SOC_AMS_DELTA) += snd-soc-ams-delta.o obj-$(CONFIG_SND_OMAP_SOC_OSK5912) += snd-soc-osk5912.o -obj-$(CONFIG_SND_OMAP_SOC_OVERO) += snd-soc-overo.o obj-$(CONFIG_SND_OMAP_SOC_OMAP2EVM) += snd-soc-omap2evm.o -obj-$(CONFIG_SND_OMAP_SOC_OMAP3EVM) += snd-soc-omap3evm.o obj-$(CONFIG_SND_OMAP_SOC_AM3517EVM) += snd-soc-am3517evm.o obj-$(CONFIG_SND_OMAP_SOC_SDP3430) += snd-soc-sdp3430.o obj-$(CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040) += snd-soc-omap-abe-twl6040.o obj-$(CONFIG_SND_OMAP_SOC_OMAP_TWL4030) += snd-soc-omap-twl4030.o obj-$(CONFIG_SND_OMAP_SOC_OMAP3_PANDORA) += snd-soc-omap3pandora.o -obj-$(CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE) += snd-soc-omap3beagle.o obj-$(CONFIG_SND_OMAP_SOC_ZOOM2) += snd-soc-zoom2.o -obj-$(CONFIG_SND_OMAP_SOC_IGEP0020) += snd-soc-igep0020.o obj-$(CONFIG_SND_OMAP_SOC_OMAP_HDMI) += snd-soc-omap-hdmi-card.o diff --git a/sound/soc/omap/igep0020.c b/sound/soc/omap/igep0020.c deleted file mode 100644 index e835781..0000000 --- a/sound/soc/omap/igep0020.c +++ /dev/null @@ -1,120 +0,0 @@ -/* - * igep0020.c -- SoC audio for IGEP v2 - * - * Based on sound/soc/omap/overo.c by Steve Sakoman - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#include <linux/clk.h> -#include <linux/platform_device.h> -#include <linux/module.h> -#include <sound/core.h> -#include <sound/pcm.h> -#include <sound/soc.h> - -#include <asm/mach-types.h> -#include <mach/hardware.h> -#include <mach/gpio.h> -#include <plat/mcbsp.h> - -#include "omap-mcbsp.h" -#include "omap-pcm.h" - -static int igep2_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_dai *codec_dai = rtd->codec_dai; - int ret; - - /* Set the codec system clock for DAC and ADC */ - ret = snd_soc_dai_set_sysclk(codec_dai, 0, 26000000, - SND_SOC_CLOCK_IN); - if (ret < 0) { - printk(KERN_ERR "can't set codec system clock\n"); - return ret; - } - - return 0; -} - -static struct snd_soc_ops igep2_ops = { - .hw_params = igep2_hw_params, -}; - -/* Digital audio interface glue - connects codec <--> CPU */ -static struct snd_soc_dai_link igep2_dai = { - .name = "TWL4030", - .stream_name = "TWL4030", - .cpu_dai_name = "omap-mcbsp.2", - .codec_dai_name = "twl4030-hifi", - .platform_name = "omap-pcm-audio", - .codec_name = "twl4030-codec", - .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | - SND_SOC_DAIFMT_CBM_CFM, - .ops = &igep2_ops, -}; - -/* Audio machine driver */ -static struct snd_soc_card snd_soc_card_igep2 = { - .name = "igep2", - .owner = THIS_MODULE, - .dai_link = &igep2_dai, - .num_links = 1, -}; - -static struct platform_device *igep2_snd_device; - -static int __init igep2_soc_init(void) -{ - int ret; - - if (!machine_is_igep0020()) - return -ENODEV; - printk(KERN_INFO "IGEP v2 SoC init\n"); - - igep2_snd_device = platform_device_alloc("soc-audio", -1); - if (!igep2_snd_device) { - printk(KERN_ERR "Platform device allocation failed\n"); - return -ENOMEM; - } - - platform_set_drvdata(igep2_snd_device, &snd_soc_card_igep2); - - ret = platform_device_add(igep2_snd_device); - if (ret) - goto err1; - - return 0; - -err1: - printk(KERN_ERR "Unable to add platform device\n"); - platform_device_put(igep2_snd_device); - - return ret; -} -module_init(igep2_soc_init); - -static void __exit igep2_soc_exit(void) -{ - platform_device_unregister(igep2_snd_device); -} -module_exit(igep2_soc_exit); - -MODULE_AUTHOR("Enric Balletbo i Serra eballetbo@iseebcn.com"); -MODULE_DESCRIPTION("ALSA SoC IGEP v2"); -MODULE_LICENSE("GPL"); diff --git a/sound/soc/omap/omap3beagle.c b/sound/soc/omap/omap3beagle.c deleted file mode 100644 index 2830dfd..0000000 --- a/sound/soc/omap/omap3beagle.c +++ /dev/null @@ -1,150 +0,0 @@ -/* - * omap3beagle.c -- SoC audio for OMAP3 Beagle - * - * Author: Steve Sakoman steve@sakoman.com - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#include <linux/clk.h> -#include <linux/platform_device.h> -#include <linux/module.h> -#include <sound/core.h> -#include <sound/pcm.h> -#include <sound/soc.h> - -#include <asm/mach-types.h> -#include <mach/hardware.h> -#include <mach/gpio.h> -#include <plat/mcbsp.h> - -#include "omap-mcbsp.h" -#include "omap-pcm.h" - -static int omap3beagle_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_dai *codec_dai = rtd->codec_dai; - struct snd_soc_dai *cpu_dai = rtd->cpu_dai; - unsigned int fmt; - int ret; - - switch (params_channels(params)) { - case 2: /* Stereo I2S mode */ - fmt = SND_SOC_DAIFMT_I2S | - SND_SOC_DAIFMT_NB_NF | - SND_SOC_DAIFMT_CBM_CFM; - break; - case 4: /* Four channel TDM mode */ - fmt = SND_SOC_DAIFMT_DSP_A | - SND_SOC_DAIFMT_IB_NF | - SND_SOC_DAIFMT_CBM_CFM; - break; - default: - return -EINVAL; - } - - /* Set codec DAI configuration */ - ret = snd_soc_dai_set_fmt(codec_dai, fmt); - if (ret < 0) { - printk(KERN_ERR "can't set codec DAI configuration\n"); - return ret; - } - - /* Set cpu DAI configuration */ - ret = snd_soc_dai_set_fmt(cpu_dai, fmt); - if (ret < 0) { - printk(KERN_ERR "can't set cpu DAI configuration\n"); - return ret; - } - - /* Set the codec system clock for DAC and ADC */ - ret = snd_soc_dai_set_sysclk(codec_dai, 0, 26000000, - SND_SOC_CLOCK_IN); - if (ret < 0) { - printk(KERN_ERR "can't set codec system clock\n"); - return ret; - } - - return 0; -} - -static struct snd_soc_ops omap3beagle_ops = { - .hw_params = omap3beagle_hw_params, -}; - -/* Digital audio interface glue - connects codec <--> CPU */ -static struct snd_soc_dai_link omap3beagle_dai = { - .name = "TWL4030", - .stream_name = "TWL4030", - .cpu_dai_name = "omap-mcbsp.2", - .platform_name = "omap-pcm-audio", - .codec_dai_name = "twl4030-hifi", - .codec_name = "twl4030-codec", - .ops = &omap3beagle_ops, -}; - -/* Audio machine driver */ -static struct snd_soc_card snd_soc_omap3beagle = { - .name = "omap3beagle", - .owner = THIS_MODULE, - .dai_link = &omap3beagle_dai, - .num_links = 1, -}; - -static struct platform_device *omap3beagle_snd_device; - -static int __init omap3beagle_soc_init(void) -{ - int ret; - - if (!(machine_is_omap3_beagle() || machine_is_devkit8000())) - return -ENODEV; - pr_info("OMAP3 Beagle/Devkit8000 SoC init\n"); - - omap3beagle_snd_device = platform_device_alloc("soc-audio", -1); - if (!omap3beagle_snd_device) { - printk(KERN_ERR "Platform device allocation failed\n"); - return -ENOMEM; - } - - platform_set_drvdata(omap3beagle_snd_device, &snd_soc_omap3beagle); - - ret = platform_device_add(omap3beagle_snd_device); - if (ret) - goto err1; - - return 0; - -err1: - printk(KERN_ERR "Unable to add platform device\n"); - platform_device_put(omap3beagle_snd_device); - - return ret; -} - -static void __exit omap3beagle_soc_exit(void) -{ - platform_device_unregister(omap3beagle_snd_device); -} - -module_init(omap3beagle_soc_init); -module_exit(omap3beagle_soc_exit); - -MODULE_AUTHOR("Steve Sakoman steve@sakoman.com"); -MODULE_DESCRIPTION("ALSA SoC OMAP3 Beagle"); -MODULE_LICENSE("GPL"); diff --git a/sound/soc/omap/omap3evm.c b/sound/soc/omap/omap3evm.c deleted file mode 100644 index 3d468c9..0000000 --- a/sound/soc/omap/omap3evm.c +++ /dev/null @@ -1,118 +0,0 @@ -/* - * omap3evm.c -- ALSA SoC support for OMAP3 EVM - * - * Author: Anuj Aggarwal anuj.aggarwal@ti.com - * - * Based on sound/soc/omap/beagle.c by Steve Sakoman - * - * Copyright (C) 2008 Texas Instruments, Incorporated - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind, - * whether express or implied; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - */ - -#include <linux/clk.h> -#include <linux/platform_device.h> -#include <linux/module.h> -#include <sound/core.h> -#include <sound/pcm.h> -#include <sound/soc.h> - -#include <asm/mach-types.h> -#include <mach/hardware.h> -#include <mach/gpio.h> -#include <plat/mcbsp.h> - -#include "omap-mcbsp.h" -#include "omap-pcm.h" - -static int omap3evm_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_dai *codec_dai = rtd->codec_dai; - int ret; - - /* Set the codec system clock for DAC and ADC */ - ret = snd_soc_dai_set_sysclk(codec_dai, 0, 26000000, - SND_SOC_CLOCK_IN); - if (ret < 0) { - printk(KERN_ERR "Can't set codec system clock\n"); - return ret; - } - - return 0; -} - -static struct snd_soc_ops omap3evm_ops = { - .hw_params = omap3evm_hw_params, -}; - -/* Digital audio interface glue - connects codec <--> CPU */ -static struct snd_soc_dai_link omap3evm_dai = { - .name = "TWL4030", - .stream_name = "TWL4030", - .cpu_dai_name = "omap-mcbsp.2", - .codec_dai_name = "twl4030-hifi", - .platform_name = "omap-pcm-audio", - .codec_name = "twl4030-codec", - .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | - SND_SOC_DAIFMT_CBM_CFM, - .ops = &omap3evm_ops, -}; - -/* Audio machine driver */ -static struct snd_soc_card snd_soc_omap3evm = { - .name = "omap3evm", - .owner = THIS_MODULE, - .dai_link = &omap3evm_dai, - .num_links = 1, -}; - -static struct platform_device *omap3evm_snd_device; - -static int __init omap3evm_soc_init(void) -{ - int ret; - - if (!machine_is_omap3evm()) - return -ENODEV; - pr_info("OMAP3 EVM SoC init\n"); - - omap3evm_snd_device = platform_device_alloc("soc-audio", -1); - if (!omap3evm_snd_device) { - printk(KERN_ERR "Platform device allocation failed\n"); - return -ENOMEM; - } - - platform_set_drvdata(omap3evm_snd_device, &snd_soc_omap3evm); - ret = platform_device_add(omap3evm_snd_device); - if (ret) - goto err1; - - return 0; - -err1: - printk(KERN_ERR "Unable to add platform device\n"); - platform_device_put(omap3evm_snd_device); - - return ret; -} - -static void __exit omap3evm_soc_exit(void) -{ - platform_device_unregister(omap3evm_snd_device); -} - -module_init(omap3evm_soc_init); -module_exit(omap3evm_soc_exit); - -MODULE_AUTHOR("Anuj Aggarwal anuj.aggarwal@ti.com"); -MODULE_DESCRIPTION("ALSA SoC OMAP3 EVM"); -MODULE_LICENSE("GPL v2"); diff --git a/sound/soc/omap/overo.c b/sound/soc/omap/overo.c deleted file mode 100644 index 6ac3e0c..0000000 --- a/sound/soc/omap/overo.c +++ /dev/null @@ -1,122 +0,0 @@ -/* - * overo.c -- SoC audio for Gumstix Overo - * - * Author: Steve Sakoman steve@sakoman.com - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#include <linux/clk.h> -#include <linux/platform_device.h> -#include <linux/module.h> -#include <sound/core.h> -#include <sound/pcm.h> -#include <sound/soc.h> - -#include <asm/mach-types.h> -#include <mach/hardware.h> -#include <mach/gpio.h> -#include <plat/mcbsp.h> - -#include "omap-mcbsp.h" -#include "omap-pcm.h" - -static int overo_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_dai *codec_dai = rtd->codec_dai; - int ret; - - /* Set the codec system clock for DAC and ADC */ - ret = snd_soc_dai_set_sysclk(codec_dai, 0, 26000000, - SND_SOC_CLOCK_IN); - if (ret < 0) { - printk(KERN_ERR "can't set codec system clock\n"); - return ret; - } - - return 0; -} - -static struct snd_soc_ops overo_ops = { - .hw_params = overo_hw_params, -}; - -/* Digital audio interface glue - connects codec <--> CPU */ -static struct snd_soc_dai_link overo_dai = { - .name = "TWL4030", - .stream_name = "TWL4030", - .cpu_dai_name = "omap-mcbsp.2", - .codec_dai_name = "twl4030-hifi", - .platform_name = "omap-pcm-audio", - .codec_name = "twl4030-codec", - .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | - SND_SOC_DAIFMT_CBM_CFM, - .ops = &overo_ops, -}; - -/* Audio machine driver */ -static struct snd_soc_card snd_soc_card_overo = { - .name = "overo", - .owner = THIS_MODULE, - .dai_link = &overo_dai, - .num_links = 1, -}; - -static struct platform_device *overo_snd_device; - -static int __init overo_soc_init(void) -{ - int ret; - - if (!(machine_is_overo() || machine_is_cm_t35())) { - pr_debug("Incomatible machine!\n"); - return -ENODEV; - } - printk(KERN_INFO "overo SoC init\n"); - - overo_snd_device = platform_device_alloc("soc-audio", -1); - if (!overo_snd_device) { - printk(KERN_ERR "Platform device allocation failed\n"); - return -ENOMEM; - } - - platform_set_drvdata(overo_snd_device, &snd_soc_card_overo); - - ret = platform_device_add(overo_snd_device); - if (ret) - goto err1; - - return 0; - -err1: - printk(KERN_ERR "Unable to add platform device\n"); - platform_device_put(overo_snd_device); - - return ret; -} -module_init(overo_soc_init); - -static void __exit overo_soc_exit(void) -{ - platform_device_unregister(overo_snd_device); -} -module_exit(overo_soc_exit); - -MODULE_AUTHOR("Steve Sakoman steve@sakoman.com"); -MODULE_DESCRIPTION("ALSA SoC overo"); -MODULE_LICENSE("GPL");
On Wed, Aug 08, 2012 at 12:54:06PM +0300, Peter Ujfalusi wrote:
Changes under arch/arm/mach-omap2/ are trivial, I don't expect merge issues later. If it is OK for the maintainers I would like this to go via audio tree (with the McBSP and the twl4030-audio stack DT support).
This all looks OK to me, again if it gets applied via ASoC I'll put it on a separate branch so if we do need to get into OMAP as well it's easy to do so.
* Mark Brown broonie@opensource.wolfsonmicro.com [120808 06:27]:
On Wed, Aug 08, 2012 at 12:54:06PM +0300, Peter Ujfalusi wrote:
Changes under arch/arm/mach-omap2/ are trivial, I don't expect merge issues later. If it is OK for the maintainers I would like this to go via audio tree (with the McBSP and the twl4030-audio stack DT support).
This all looks OK to me, again if it gets applied via ASoC I'll put it on a separate branch so if we do need to get into OMAP as well it's easy to do so.
I've acked the omap related patches so when the other changes comments are dealt with, please feel free to merge via ASoC tree.
Regards,
Tony
participants (3)
-
Mark Brown -
Peter Ujfalusi -
Tony Lindgren