At Fri, 09 Oct 2009 22:08:58 -0600, Robert Hancock wrote:

Fix the num_total_dacs setting for Chaintech AV710. The existing comment that only PSDOUT0 is connected is correct, but since the card is using packed AC97 mode to send 6 channels to the codec, num_total_dacs should be set to 6 and not 2. This allows 6-channel surround to work. Also clarify a comment regarding the additional WM8728 codec on this card (it's connected to the SPDIF output and always receives the same data).

Signed-off-by: Robert Hancock hancockrwd@gmail.com

Applied now. Thanks.

Takashi

diff --git a/sound/pci/ice1712/amp.c b/sound/pci/ice1712/amp.c index 3756430..bfcf989 100644 --- a/sound/pci/ice1712/amp.c +++ b/sound/pci/ice1712/amp.c @@ -52,11 +52,13 @@ static int __devinit snd_vt1724_amp_init(struct snd_ice1712 *ice)

/* only use basic functionality for now */

• ice->num_total_dacs = 2; /* only PSDOUT0 is connected */

• /* VT1616 6ch codec connected to PSDOUT0 using packed mode */
• ice->num_total_dacs = 6; ice->num_total_adcs = 2;

• /* Chaintech AV-710 has another codecs, which need initialization */
• /* initialize WM8728 codec */

• /* Chaintech AV-710 has another WM8728 codec connected to PSDOUT4

•   (shared with the SPDIF output). Mixer control for this codec
  

•   is not yet supported. */
  

  if (ice->eeprom.subvendor == VT1724_SUBDEVICE_AV710) { for (i = 0; i < ARRAY_SIZE(wm_inits); i += 2) wm_put(ice, wm_inits[i], wm_inits[i+1]);