[alsa-devel] [PATCH v2] ASoC: add TI ts3a227e headset chip driver
The TS3A227E is an autonomous audio accessory detection and configuration switch that detects 3-pole or 4-pole audio accessories and configures internal switches to route the signals accordingly.
This chip also has built-in support for the new button standard described in the Android "Wired audio headset specification" v1.0. These buttons will be reported on the jack as buttons 0-3 mapped to KEY_MEDIA, KEY_VOLUMEUP, KEY_VOLUMEDOWN, and KEY_VOICE_COMMAND.
This will be added as an aux_dev and have the jack passed in from the machine driver.
Signed-off-by: Dylan Reid dgreid@chromium.org --- Changes since v1: Use button to key mapping instead of separate input device --- .../devicetree/bindings/sound/ts3a227e.txt | 26 ++ sound/soc/codecs/Kconfig | 5 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/ts3a227e.c | 321 +++++++++++++++++++++ sound/soc/codecs/ts3a227e.h | 17 ++ 5 files changed, 371 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/ts3a227e.txt create mode 100644 sound/soc/codecs/ts3a227e.c create mode 100644 sound/soc/codecs/ts3a227e.h
diff --git a/Documentation/devicetree/bindings/sound/ts3a227e.txt b/Documentation/devicetree/bindings/sound/ts3a227e.txt new file mode 100644 index 0000000..e8bf23e --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ts3a227e.txt @@ -0,0 +1,26 @@ +Texas Instruments TS3A227E +Autonomous Audio Accessory Detection and Configuration Switch + +The TS3A227E detect headsets of 3-ring and 4-ring standards and +switches automatically to route the microphone correctly. It also +handles key press detection in accordance with the Android audio +headset specification v1.0. + +Required properties: + + - compatible: Should contain "ti,ts3a227e". + - reg: The i2c address. Should contain <0x3b>. + - interrupt-parent: The parent interrupt controller + - interrupts: Interrupt number for /INT pin from the 227e + + +Examples: + + i2c { + ts3a227e@3b { + compatible = "ti,ts3a227e"; + reg = <0x3b>; + interrupt-parent = <&gpio>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + }; + }; diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index a68d173..243ec86 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -109,6 +109,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_TLV320AIC3X if I2C select SND_SOC_TPA6130A2 if I2C select SND_SOC_TLV320DAC33 if I2C + select SND_SOC_TS3A227E if I2C select SND_SOC_TWL4030 if TWL4030_CORE select SND_SOC_TWL6040 if TWL6040_CORE select SND_SOC_UDA134X @@ -607,6 +608,10 @@ config SND_SOC_TLV320AIC3X config SND_SOC_TLV320DAC33 tristate
+config SND_SOC_TS3A227E + tristate "TI Headset/Mic detect and keypress chip" + depends on I2C + config SND_SOC_TWL4030 select MFD_TWL4030_AUDIO tristate diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 5dce451..a1eb7ef 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -109,6 +109,7 @@ snd-soc-tlv320aic31xx-objs := tlv320aic31xx.o snd-soc-tlv320aic32x4-objs := tlv320aic32x4.o snd-soc-tlv320aic3x-objs := tlv320aic3x.o snd-soc-tlv320dac33-objs := tlv320dac33.o +snd-soc-ts3a227e-objs := ts3a227e.o snd-soc-twl4030-objs := twl4030.o snd-soc-twl6040-objs := twl6040.o snd-soc-uda134x-objs := uda134x.o @@ -282,6 +283,7 @@ obj-$(CONFIG_SND_SOC_TLV320AIC31XX) += snd-soc-tlv320aic31xx.o obj-$(CONFIG_SND_SOC_TLV320AIC32X4) += snd-soc-tlv320aic32x4.o obj-$(CONFIG_SND_SOC_TLV320AIC3X) += snd-soc-tlv320aic3x.o obj-$(CONFIG_SND_SOC_TLV320DAC33) += snd-soc-tlv320dac33.o +obj-$(CONFIG_SND_SOC_TS3A227E) += snd-soc-ts3a227e.o obj-$(CONFIG_SND_SOC_TWL4030) += snd-soc-twl4030.o obj-$(CONFIG_SND_SOC_TWL6040) += snd-soc-twl6040.o obj-$(CONFIG_SND_SOC_UDA134X) += snd-soc-uda134x.o diff --git a/sound/soc/codecs/ts3a227e.c b/sound/soc/codecs/ts3a227e.c new file mode 100644 index 0000000..4ca6ddc --- /dev/null +++ b/sound/soc/codecs/ts3a227e.c @@ -0,0 +1,321 @@ +/* + * TS3A227E Autonomous Audio Accessory Detection and Configuration Switch + * + * Copyright (C) 2014 Google, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/gpio.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/input.h> +#include <linux/module.h> +#include <linux/of_gpio.h> +#include <linux/regmap.h> + +#include <sound/core.h> +#include <sound/jack.h> +#include <sound/soc.h> + +struct ts3a227e { + struct regmap *regmap; + struct snd_soc_jack *jack; + bool plugged; + bool mic_present; + unsigned int buttons_held; +}; + +/* Button values to be reported on the jack */ +static const int ts3a227e_buttons[] = { + SND_JACK_BTN_0, + SND_JACK_BTN_1, + SND_JACK_BTN_2, + SND_JACK_BTN_3, +}; + +#define TS3A227E_NUM_BUTTONS 4 +#define TS3A227E_JACK_MASK (SND_JACK_HEADPHONE | \ + SND_JACK_MICROPHONE | \ + SND_JACK_BTN_0 | \ + SND_JACK_BTN_1 | \ + SND_JACK_BTN_2 | \ + SND_JACK_BTN_3) + +/* TS3A227E registers */ +#define TS3A227E_REG_DEVICE_ID 0x00 +#define TS3A227E_REG_INTERRUPT 0x01 +#define TS3A227E_REG_KP_INTERRUPT 0x02 +#define TS3A227E_REG_INTERRUPT_DISABLE 0x03 +#define TS3A227E_REG_SETTING_1 0x04 +#define TS3A227E_REG_SETTING_2 0x05 +#define TS3A227E_REG_SETTING_3 0x06 +#define TS3A227E_REG_SWITCH_CONTROL_1 0x07 +#define TS3A227E_REG_SWITCH_CONTROL_2 0x08 +#define TS3A227E_REG_SWITCH_STATUS_1 0x09 +#define TS3A227E_REG_SWITCH_STATUS_2 0x0a +#define TS3A227E_REG_ACCESSORY_STATUS 0x0b +#define TS3A227E_REG_ADC_OUTPUT 0x0c +#define TS3A227E_REG_KP_THRESHOLD_1 0x0d +#define TS3A227E_REG_KP_THRESHOLD_2 0x0e +#define TS3A227E_REG_KP_THRESHOLD_3 0x0f + +/* TS3A227E_REG_INTERRUPT 0x01 */ +#define INS_REM_EVENT 0x01 +#define DETECTION_COMPLETE_EVENT 0x02 + +/* TS3A227E_REG_KP_INTERRUPT 0x02 */ +#define PRESS_MASK(idx) (0x01 << (2 * (idx))) +#define RELEASE_MASK(idx) (0x02 << (2 * (idx))) + +/* TS3A227E_REG_INTERRUPT_DISABLE 0x03 */ +#define INS_REM_INT_DISABLE 0x01 +#define DETECTION_COMPLETE_INT_DISABLE 0x02 +#define ADC_COMPLETE_INT_DISABLE 0x04 +#define INTB_DISABLE 0x08 + +/* TS3A227E_REG_SETTING_2 0x05 */ +#define KP_ENABLE 0x04 + +/* TS3A227E_REG_ACCESSORY_STATUS 0x0b */ +#define TYPE_3_POLE 0x01 +#define TYPE_4_POLE_OMTP 0x02 +#define TYPE_4_POLE_STANDARD 0x04 +#define JACK_INSERTED 0x08 +#define EITHER_MIC_MASK (TYPE_4_POLE_OMTP | TYPE_4_POLE_STANDARD) + +static const struct reg_default ts3a227e_reg_defaults[] = { + { TS3A227E_REG_DEVICE_ID, 0x10 }, + { TS3A227E_REG_INTERRUPT, 0x00 }, + { TS3A227E_REG_KP_INTERRUPT, 0x00 }, + { TS3A227E_REG_INTERRUPT_DISABLE, 0x08 }, + { TS3A227E_REG_SETTING_1, 0x23 }, + { TS3A227E_REG_SETTING_2, 0x00 }, + { TS3A227E_REG_SETTING_3, 0x0e }, + { TS3A227E_REG_SWITCH_CONTROL_1, 0x00 }, + { TS3A227E_REG_SWITCH_CONTROL_2, 0x00 }, + { TS3A227E_REG_SWITCH_STATUS_1, 0x0c }, + { TS3A227E_REG_SWITCH_STATUS_2, 0x00 }, + { TS3A227E_REG_ACCESSORY_STATUS, 0x00 }, + { TS3A227E_REG_ADC_OUTPUT, 0x00 }, + { TS3A227E_REG_KP_THRESHOLD_1, 0x20 }, + { TS3A227E_REG_KP_THRESHOLD_2, 0x40 }, + { TS3A227E_REG_KP_THRESHOLD_3, 0x68 }, +}; + +static bool ts3a227e_readable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case TS3A227E_REG_DEVICE_ID ... TS3A227E_REG_KP_THRESHOLD_3: + return true; + default: + return false; + } +} + +static bool ts3a227e_writeable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case TS3A227E_REG_INTERRUPT_DISABLE ... TS3A227E_REG_SWITCH_CONTROL_2: + case TS3A227E_REG_KP_THRESHOLD_1 ... TS3A227E_REG_KP_THRESHOLD_3: + return true; + default: + return false; + } +} + +static bool ts3a227e_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case TS3A227E_REG_INTERRUPT ... TS3A227E_REG_INTERRUPT_DISABLE: + case TS3A227E_REG_SETTING_2: + case TS3A227E_REG_SWITCH_STATUS_1 ... TS3A227E_REG_ADC_OUTPUT: + return true; + default: + return false; + } +} + +static void ts3a227e_jack_report(struct ts3a227e *ts3a227e) +{ + unsigned int i; + int report = 0; + + if (!ts3a227e->jack) + return; + + if (ts3a227e->plugged) + report = SND_JACK_HEADPHONE; + if (ts3a227e->mic_present) + report |= SND_JACK_MICROPHONE; + for (i = 0; i < TS3A227E_NUM_BUTTONS; i++) { + if (ts3a227e->buttons_held & (1 << i)) + report |= ts3a227e_buttons[i]; + } + snd_soc_jack_report(ts3a227e->jack, report, TS3A227E_JACK_MASK); +} + +static void ts3a227e_new_jack_state(struct ts3a227e *ts3a227e, unsigned acc_reg) +{ + bool plugged, mic_present; + + plugged = !!(acc_reg & JACK_INSERTED); + mic_present = plugged && !!(acc_reg & EITHER_MIC_MASK); + + ts3a227e->plugged = plugged; + + if (mic_present != ts3a227e->mic_present) { + ts3a227e->mic_present = mic_present; + ts3a227e->buttons_held = 0; + if (mic_present) { + /* Enable key press detection. */ + regmap_update_bits(ts3a227e->regmap, + TS3A227E_REG_SETTING_2, + KP_ENABLE, KP_ENABLE); + } + } +} + +static irqreturn_t ts3a227e_interrupt(int irq, void *data) +{ + struct ts3a227e *ts3a227e = (struct ts3a227e *)data; + struct regmap *regmap = ts3a227e->regmap; + unsigned int int_reg, kp_int_reg, acc_reg, i; + + /* Check for plug/unplug. */ + regmap_read(regmap, TS3A227E_REG_INTERRUPT, &int_reg); + if (int_reg & (DETECTION_COMPLETE_EVENT | INS_REM_EVENT)) { + regmap_read(regmap, TS3A227E_REG_ACCESSORY_STATUS, &acc_reg); + ts3a227e_new_jack_state(ts3a227e, acc_reg); + } + + /* Report any key events. */ + regmap_read(regmap, TS3A227E_REG_KP_INTERRUPT, &kp_int_reg); + for (i = 0; i < TS3A227E_NUM_BUTTONS; i++) { + if (kp_int_reg & PRESS_MASK(i)) + ts3a227e->buttons_held |= (1 << i); + if (kp_int_reg & RELEASE_MASK(i)) + ts3a227e->buttons_held &= ~(1 << i); + } + + ts3a227e_jack_report(ts3a227e); + + return IRQ_HANDLED; +} + +/** + * ts3a227e_enable_jack_detect - Specify a jack for event reporting + * + * @codec: codec to register the jack with + * @jack: jack to use to report headset and button events on + * + * After this function has been called the headset insert/remove and button + * events 0-3 will be routed to the given jack. Jack can be null to stop + * reporting. + */ +int ts3a227e_enable_jack_detect(struct snd_soc_codec *codec, + struct snd_soc_jack *jack) +{ + struct ts3a227e *ts3a227e = snd_soc_codec_get_drvdata(codec); + + snd_jack_set_key(jack->jack, SND_JACK_BTN_0, KEY_MEDIA); + snd_jack_set_key(jack->jack, SND_JACK_BTN_1, KEY_VOLUMEUP); + snd_jack_set_key(jack->jack, SND_JACK_BTN_2, KEY_VOLUMEDOWN); + snd_jack_set_key(jack->jack, SND_JACK_BTN_3, KEY_VOICECOMMAND); + + ts3a227e->jack = jack; + ts3a227e_jack_report(ts3a227e); + + return 0; +} +EXPORT_SYMBOL_GPL(ts3a227e_enable_jack_detect); + +static struct snd_soc_codec_driver ts3a227e_codec_driver; + +static const struct regmap_config ts3a227e_regmap_config = { + .val_bits = 8, + .reg_bits = 8, + + .max_register = TS3A227E_REG_KP_THRESHOLD_3, + .readable_reg = ts3a227e_readable_reg, + .writeable_reg = ts3a227e_writeable_reg, + .volatile_reg = ts3a227e_volatile_reg, + + .cache_type = REGCACHE_RBTREE, + .reg_defaults = ts3a227e_reg_defaults, + .num_reg_defaults = ARRAY_SIZE(ts3a227e_reg_defaults), +}; + +static int ts3a227e_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct ts3a227e *ts3a227e; + struct device *dev = &i2c->dev; + int ret; + + ts3a227e = devm_kzalloc(&i2c->dev, sizeof(*ts3a227e), GFP_KERNEL); + if (ts3a227e == NULL) + return -ENOMEM; + + i2c_set_clientdata(i2c, ts3a227e); + + ts3a227e->regmap = devm_regmap_init_i2c(i2c, &ts3a227e_regmap_config); + if (IS_ERR(ts3a227e->regmap)) + return PTR_ERR(ts3a227e->regmap); + + ret = devm_request_threaded_irq(dev, i2c->irq, NULL, ts3a227e_interrupt, + IRQF_TRIGGER_LOW | IRQF_ONESHOT, + "TS3A227E", ts3a227e); + if (ret) { + dev_err(dev, "Cannot request irq %d (%d)\n", i2c->irq, ret); + return ret; + } + + ret = snd_soc_register_codec(&i2c->dev, &ts3a227e_codec_driver, + NULL, 0); + if (ret) + return ret; + + /* Enable interrupts except for ADC complete. */ + regmap_update_bits(ts3a227e->regmap, TS3A227E_REG_INTERRUPT_DISABLE, + INTB_DISABLE | ADC_COMPLETE_INT_DISABLE, + ADC_COMPLETE_INT_DISABLE); + + return 0; +} + +static int ts3a227e_i2c_remove(struct i2c_client *client) +{ + snd_soc_unregister_codec(&client->dev); + return 0; +} + +static const struct i2c_device_id ts3a227e_i2c_ids[] = { + { "ts3a227e", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ts3a227e_i2c_ids); + +static const struct of_device_id ts3a227e_of_match[] = { + { .compatible = "ti,ts3a227e", }, + { } +}; +MODULE_DEVICE_TABLE(of, ts3a227e_of_match); + +static struct i2c_driver ts3a227e_driver = { + .driver = { + .name = "ts3a227e", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(ts3a227e_of_match), + }, + .probe = ts3a227e_i2c_probe, + .remove = ts3a227e_i2c_remove, + .id_table = ts3a227e_i2c_ids, +}; +module_i2c_driver(ts3a227e_driver); + +MODULE_DESCRIPTION("ASoC ts3a227e driver"); +MODULE_AUTHOR("Dylan Reid dgreid@chromium.org"); +MODULE_LICENSE("GPLv2"); diff --git a/sound/soc/codecs/ts3a227e.h b/sound/soc/codecs/ts3a227e.h new file mode 100644 index 0000000..8a58886 --- /dev/null +++ b/sound/soc/codecs/ts3a227e.h @@ -0,0 +1,17 @@ +/* + * TS3A227E Autonous Audio Accessory Detection and Configureation Switch + * + * Copyright (C) 2014 Google, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _TS3A227E_H +#define _TS3A227E_H + +int ts3a227e_enable_jack_detect(struct snd_soc_codec *codec, + struct snd_soc_jack *jack); + +#endif
On 11/13/2014 01:15 AM, Dylan Reid wrote:
+static struct snd_soc_codec_driver ts3a227e_codec_driver; [...]
- ret = snd_soc_register_codec(&i2c->dev, &ts3a227e_codec_driver,
NULL, 0);
[...]
Since the driver doesn't need anything CODEC specific it could be made a component driver and then you can also use devm_snd_soc_register_component.
On Wed, Nov 12, 2014 at 11:22 PM, Lars-Peter Clausen lars@metafoo.de wrote:
On 11/13/2014 01:15 AM, Dylan Reid wrote:
+static struct snd_soc_codec_driver ts3a227e_codec_driver; [...]
ret = snd_soc_register_codec(&i2c->dev, &ts3a227e_codec_driver,
NULL, 0);
[...]
Since the driver doesn't need anything CODEC specific it could be made a component driver and then you can also use devm_snd_soc_register_component.
Thanks Lars. That makes registering the jack from the platform driver simpler too.
participants (2)
-
Dylan Reid
-
Lars-Peter Clausen