[alsa-devel] [PATCH] ASoC: simple-card: add "invert" property for detect GPIOs
Since hardware may invert detect GPIO of headphone or mic, add one property to support software invert.
Signed-off-by: Jianqun jay.xu@rock-chips.com --- sound/soc/generic/simple-card.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-)
diff --git a/sound/soc/generic/simple-card.c b/sound/soc/generic/simple-card.c index d1b7293..f1bb537 100644 --- a/sound/soc/generic/simple-card.c +++ b/sound/soc/generic/simple-card.c @@ -29,7 +29,9 @@ struct simple_card_data { } *dai_props; unsigned int mclk_fs; int gpio_hp_det; + int gpio_hp_det_invert; int gpio_mic_det; + int gpio_mic_det_invert; struct snd_soc_dai_link dai_link[]; /* dynamically allocated */ };
@@ -148,6 +150,7 @@ static int asoc_simple_card_dai_init(struct snd_soc_pcm_runtime *rtd) simple_card_hp_jack_pins);
simple_card_hp_jack_gpio.gpio = priv->gpio_hp_det; + simple_card_hp_jack_gpio.invert = priv->gpio_hp_det_invert; snd_soc_jack_add_gpios(&simple_card_hp_jack, 1, &simple_card_hp_jack_gpio); } @@ -159,6 +162,7 @@ static int asoc_simple_card_dai_init(struct snd_soc_pcm_runtime *rtd) ARRAY_SIZE(simple_card_mic_jack_pins), simple_card_mic_jack_pins); simple_card_mic_jack_gpio.gpio = priv->gpio_mic_det; + simple_card_mic_jack_gpio.invert = priv->gpio_mic_det_invert; snd_soc_jack_add_gpios(&simple_card_mic_jack, 1, &simple_card_mic_jack_gpio); } @@ -381,6 +385,7 @@ static int asoc_simple_card_parse_of(struct device_node *node, struct simple_card_data *priv) { struct device *dev = simple_priv_to_dev(priv); + enum of_gpio_flags flags; u32 val; int ret;
@@ -436,13 +441,15 @@ static int asoc_simple_card_parse_of(struct device_node *node, return ret; }
- priv->gpio_hp_det = of_get_named_gpio(node, - "simple-audio-card,hp-det-gpio", 0); + priv->gpio_hp_det = of_get_named_gpio_flags(node, + "simple-audio-card,hp-det-gpio", 0, &flags); + priv->gpio_hp_det_invert = !!(flags & OF_GPIO_ACTIVE_LOW); if (priv->gpio_hp_det == -EPROBE_DEFER) return -EPROBE_DEFER;
- priv->gpio_mic_det = of_get_named_gpio(node, - "simple-audio-card,mic-det-gpio", 0); + priv->gpio_mic_det = of_get_named_gpio_flags(node, + "simple-audio-card,mic-det-gpio", 0, &flags); + priv->gpio_mic_det_invert = !!(flags & OF_GPIO_ACTIVE_LOW); if (priv->gpio_mic_det == -EPROBE_DEFER) return -EPROBE_DEFER;
On Sat, Nov 01, 2014 at 11:22:18AM +0800, Jianqun wrote:
Since hardware may invert detect GPIO of headphone or mic, add one property to support software invert.
Applied, thanks.
participants (2)
-
Jianqun
-
Mark Brown