Update soundwire slave nodes of WSA speaker to match with dt-bindings pattern properties regular expression.

This modifiction is required to avoid dtbs-check errors occurred with qcom,soundwire.yaml.

Signed-off-by: Srinivasa Rao Mandadapu quic_srivasam@quicinc.com Co-developed-by: Ratna Deepthi Kudaravalli quic_rkudarav@quicinc.com Signed-off-by: Ratna Deepthi Kudaravalli quic_rkudarav@quicinc.com --- arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 4 ++-- arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 4 ++-- arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 4 ++-- arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts | 4 ++-- arch/arm64/boot/dts/qcom/sm8250-mtp.dts | 4 ++-- 5 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts index 2c08500..4c39cec 100644 --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts @@ -1007,7 +1007,7 @@ };

&swr0 { - left_spkr: wsa8810-left { + left_spkr: speaker@0,3 { compatible = "sdw10217211000"; reg = <0 3>; powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_HIGH>; @@ -1016,7 +1016,7 @@ #sound-dai-cells = <0>; };

- right_spkr: wsa8810-right { + right_spkr: speaker@0,4 { compatible = "sdw10217211000"; reg = <0 4>; powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index 8ba3188..df61526 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -1091,7 +1091,7 @@ vdd-io-supply = <&vreg_s4a_1p8>;

swm: swm@c85 { - left_spkr: wsa8810-left { + left_spkr: speaker@0,1 { compatible = "sdw10217201000"; reg = <0 1>; powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>; @@ -1100,7 +1100,7 @@ #sound-dai-cells = <0>; };

- right_spkr: wsa8810-right { + right_spkr: speaker@0,2 { compatible = "sdw10217201000"; powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>; reg = <0 2>; diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts index 0c375ec..f32b744 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts @@ -785,7 +785,7 @@ qcom,mbhc-headphone-vthreshold-microvolt = <50000>;

swm: swm@c85 { - left_spkr: wsa8810-left { + left_spkr: speaker@0,3 { compatible = "sdw10217211000"; reg = <0 3>; powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>; @@ -794,7 +794,7 @@ #sound-dai-cells = <0>; };

- right_spkr: wsa8810-right { + right_spkr: speaker@0,4 { compatible = "sdw10217211000"; powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>; reg = <0 4>; diff --git a/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts index f93d748..aa06a4a 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts @@ -717,7 +717,7 @@ qcom,mbhc-headphone-vthreshold-microvolt = <50000>;

swm: swm@c85 { - left_spkr: wsa8810-left { + left_spkr: speaker@0,3 { compatible = "sdw10217211000"; reg = <0 3>; powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>; @@ -726,7 +726,7 @@ #sound-dai-cells = <0>; };

- right_spkr: wsa8810-right { + right_spkr: speaker@0,4 { compatible = "sdw10217211000"; powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>; reg = <0 4>; diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts index 9db6136..532a77f 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts @@ -757,7 +757,7 @@ };

&swr0 { - left_spkr: wsa8810-right@0,3{ + left_spkr: speaker@0,3 { compatible = "sdw10217211000"; reg = <0 3>; powerdown-gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>; @@ -766,7 +766,7 @@ #sound-dai-cells = <0>; };

- right_spkr: wsa8810-left@0,4{ + right_spkr: speaker@0,4 { compatible = "sdw10217211000"; reg = <0 4>; powerdown-gpios = <&tlmm 127 GPIO_ACTIVE_HIGH>;

Remove redundant and undocumented property qcom,port-offset in soundwire controller nodes. This patch is required to avoid dtbs_check errors with qcom,soundwie.yaml

Fixes: 24f52ef0c4bf ("arm64: dts: qcom: sm8250: Add nodes for tx and rx macros with soundwire masters")

Signed-off-by: Srinivasa Rao Mandadapu quic_srivasam@quicinc.com Co-developed-by: Ratna Deepthi Kudaravalli quic_rkudarav@quicinc.com Signed-off-by: Ratna Deepthi Kudaravalli quic_rkudarav@quicinc.com Reviewed-by: Konrad Dybcio konrad.dybcio@linaro.org --- arch/arm64/boot/dts/qcom/sm8250.dtsi | 1 - 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index eb5a10c..0f430ca 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -2360,7 +2360,6 @@ qcom,ports-word-length = /bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF>; qcom,ports-block-group-count = /bits/ 8 <0xFF 0xFF 0xFF 0xFF 0xFF>; qcom,ports-lane-control = /bits/ 8 <0xFF 0x00 0x01 0x00 0x01>; - qcom,port-offset = <1>; #sound-dai-cells = <1>; #address-cells = <2>; #size-cells = <0>;

Remove redundant and undocumented property qcom,port-offset in soundwire controller nodes. This patch is required to avoid dtbs_check errors with qcom,soundwie.yaml

Fixes: 12ef689f09ab ("arm64: dts: qcom: sc7280: Add nodes for soundwire and va tx rx digital macro codecs")

Signed-off-by: Srinivasa Rao Mandadapu quic_srivasam@quicinc.com Co-developed-by: Ratna Deepthi Kudaravalli quic_rkudarav@quicinc.com Signed-off-by: Ratna Deepthi Kudaravalli quic_rkudarav@quicinc.com Reviewed-by: Konrad Dybcio konrad.dybcio@linaro.org --- arch/arm64/boot/dts/qcom/sc7280.dtsi | 1 - 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 748eef6..71be873 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -2317,7 +2317,6 @@ qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff>; qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff>; qcom,ports-lane-control = /bits/ 8 <0x00 0x01 0x00>; - qcom,port-offset = <1>;

#sound-dai-cells = <1>; #address-cells = <2>;

Convert soundwire text bindings to DT Schema format.

Update interrupt property items as per device tree, as it is not appropriately described in text file.

Signed-off-by: Srinivasa Rao Mandadapu quic_srivasam@quicinc.com Co-developed-by: Ratna Deepthi Kudaravalli quic_rkudarav@quicinc.com Signed-off-by: Ratna Deepthi Kudaravalli quic_rkudarav@quicinc.com --- Changes since V4: -- Update interrupt names in example. -- Fix blank lines. -- Remove dependecy patch info. Changes since V3: -- Remove subnode description and add appropriate pattern properties. -- Add interrput names in example. -- update some properties description. -- Revert minIteams change in previous version. -- Rebase to latest code base. Changes since V2: -- Update commit message. -- Add child node property. -- Change file name. -- Remove minIteams for few properties. -- Remove redundant required properties. -- Remove redundant description for wakeup-source property. -- Update interrupt property items. Changes since V1: -- Remove the status field in example. -- Remove interrupt-names property in the required list. -- Add the wakeup-source property.

.../devicetree/bindings/soundwire/qcom,sdw.txt | 215 ------------------ .../bindings/soundwire/qcom,soundwire.yaml | 244 +++++++++++++++++++++ 2 files changed, 244 insertions(+), 215 deletions(-) delete mode 100644 Documentation/devicetree/bindings/soundwire/qcom,sdw.txt create mode 100644 Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml

diff --git a/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt b/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt deleted file mode 100644 index e0faed8..0000000 --- a/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt +++ /dev/null @@ -1,215 +0,0 @@ -Qualcomm SoundWire Controller Bindings - - -This binding describes the Qualcomm SoundWire Controller along with its -board specific bus parameters. - -- compatible: - Usage: required - Value type: <stringlist> - Definition: must be "qcom,soundwire-v<MAJOR>.<MINOR>.<STEP>", - Example: - "qcom,soundwire-v1.3.0" - "qcom,soundwire-v1.5.0" - "qcom,soundwire-v1.5.1" - "qcom,soundwire-v1.6.0" - "qcom,soundwire-v1.7.0" -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: the base address and size of SoundWire controller - address space. - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify the SoundWire Controller core and optional - wake IRQ - -- interrupt-names: - Usage: Optional - Value type: boolean - Value type: <stringlist> - Definition: should be "core" for core and "wakeup" for wake interrupt. - -- wakeup-source: - Usage: Optional - Value type: boolean - Definition: should specify if SoundWire Controller is wake up capable. - -- clock-names: - Usage: required - Value type: <stringlist> - Definition: should be "iface" for SoundWire Controller interface clock - -- clocks: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify the SoundWire Controller interface clock - -- #sound-dai-cells: - Usage: required - Value type: <u32> - Definition: must be 1 for digital audio interfaces on the controller. - -- qcom,dout-ports: - Usage: required - Value type: <u32> - Definition: must be count of data out ports - -- qcom,din-ports: - Usage: required - Value type: <u32> - Definition: must be count of data in ports - -- qcom,ports-offset1: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify payload transport window offset1 of each - data port. Out ports followed by In ports. - Value of 0xFF indicates that this option is not implemented - or applicable for the respective data port. - More info in MIPI Alliance SoundWire 1.0 Specifications. - -- qcom,ports-offset2: - Usage: required - Value type: <prop-encoded-array> - Definition: should specify payload transport window offset2 of each - data port. Out ports followed by In ports. - Value of 0xFF indicates that this option is not implemented - or applicable for the respective data port. - More info in MIPI Alliance SoundWire 1.0 Specifications. - -- qcom,ports-sinterval-low: - Usage: required - Value type: <prop-encoded-array> - Definition: should be sample interval low of each data port. - Out ports followed by In ports. Used for Sample Interval - calculation. - Value of 0xFF indicates that this option is not implemented - or applicable for the respective data port. - More info in MIPI Alliance SoundWire 1.0 Specifications. - -- qcom,ports-word-length: - Usage: optional - Value type: <prop-encoded-array> - Definition: should be size of payload channel sample. - Value of 0xFF indicates that this option is not implemented - or applicable for the respective data port. - More info in MIPI Alliance SoundWire 1.0 Specifications. - -- qcom,ports-block-pack-mode: - Usage: optional - Value type: <prop-encoded-array> - Definition: should be 0 or 1 to indicate the block packing mode. - 0 to indicate Blocks are per Channel - 1 to indicate Blocks are per Port. - Out ports followed by In ports. - Value of 0xFF indicates that this option is not implemented - or applicable for the respective data port. - More info in MIPI Alliance SoundWire 1.0 Specifications. - -- qcom,ports-block-group-count: - Usage: optional - Value type: <prop-encoded-array> - Definition: should be in range 1 to 4 to indicate how many sample - intervals are combined into a payload. - Out ports followed by In ports. - Value of 0xFF indicates that this option is not implemented - or applicable for the respective data port. - More info in MIPI Alliance SoundWire 1.0 Specifications. - -- qcom,ports-lane-control: - Usage: optional - Value type: <prop-encoded-array> - Definition: should be in range 0 to 7 to identify which data lane - the data port uses. - Out ports followed by In ports. - Value of 0xFF indicates that this option is not implemented - or applicable for the respective data port. - More info in MIPI Alliance SoundWire 1.0 Specifications. - -- qcom,ports-hstart: - Usage: optional - Value type: <prop-encoded-array> - Definition: should be number identifying lowerst numbered coloum in - SoundWire Frame, i.e. left edge of the Transport sub-frame - for each port. Values between 0 and 15 are valid. - Out ports followed by In ports. - Value of 0xFF indicates that this option is not implemented - or applicable for the respective data port. - More info in MIPI Alliance SoundWire 1.0 Specifications. - -- qcom,ports-hstop: - Usage: optional - Value type: <prop-encoded-array> - Definition: should be number identifying highest numbered coloum in - SoundWire Frame, i.e. the right edge of the Transport - sub-frame for each port. Values between 0 and 15 are valid. - Out ports followed by In ports. - Value of 0xFF indicates that this option is not implemented - or applicable for the respective data port. - More info in MIPI Alliance SoundWire 1.0 Specifications. - -- qcom,dports-type: - Usage: optional - Value type: <prop-encoded-array> - Definition: should be one of the following types - 0 for reduced port - 1 for simple ports - 2 for full port - Out ports followed by In ports. - Value of 0xFF indicates that this option is not implemented - or applicable for the respective data port. - More info in MIPI Alliance SoundWire 1.0 Specifications. - -- reset: - Usage: optional - Value type: <prop-encoded-array> - Definition: Should specify the SoundWire audio CSR reset controller interface, - which is required for SoundWire version 1.6.0 and above. - -- reset-names: - Usage: optional - Value type: <stringlist> - Definition: should be "swr_audio_cgcr" for SoundWire audio CSR reset - controller interface. - -Note: - More Information on detail of encoding of these fields can be -found in MIPI Alliance SoundWire 1.0 Specifications. - -= SoundWire devices -Each subnode of the bus represents SoundWire device attached to it. -The properties of these nodes are defined by the individual bindings. - -= EXAMPLE -The following example represents a SoundWire controller on DB845c board -which has controller integrated inside WCD934x codec on SDM845 SoC. - -soundwire: soundwire@c85 { - compatible = "qcom,soundwire-v1.3.0"; - reg = <0xc85 0x20>; - interrupts = <20 IRQ_TYPE_EDGE_RISING>; - clocks = <&wcc>; - clock-names = "iface"; - resets = <&lpass_audiocc LPASS_AUDIO_SWR_TX_CGCR>; - reset-names = "swr_audio_cgcr"; - #sound-dai-cells = <1>; - qcom,dports-type = <0>; - qcom,dout-ports = <6>; - qcom,din-ports = <2>; - qcom,ports-sinterval-low = /bits/ 8 <0x07 0x1F 0x3F 0x7 0x1F 0x3F 0x0F 0x0F>; - qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0C 0x6 0x12 0x0D 0x07 0x0A >; - qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x1F 0x00 0x00 0x1F 0x00 0x00>; - - /* Left Speaker */ - left{ - .... - }; - - /* Right Speaker */ - right{ - .... - }; -}; diff --git a/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml new file mode 100644 index 0000000..4114c5c --- /dev/null +++ b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml @@ -0,0 +1,244 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soundwire/qcom,soundwire.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SoundWire Controller + +maintainers: + - Srinivas Kandagatla srinivas.kandagatla@linaro.org + - Srinivasa Rao Mandadapu quic_srivasam@quicinc.com + +description: + The Qualcomm SoundWire controller along with its board specific bus parameters. + +properties: + compatible: + enum: + - qcom,soundwire-v1.3.0 + - qcom,soundwire-v1.5.0 + - qcom,soundwire-v1.5.1 + - qcom,soundwire-v1.6.0 + - qcom,soundwire-v1.7.0 + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + items: + - description: specify the SoundWire controller core. + - description: specify the Soundwire controller wake IRQ. + + interrupt-names: + minItems: 1 + items: + - const: core + - const: wakeup + + clocks: + items: + - description: iface clock + + clock-names: + items: + - const: iface + + resets: + items: + - description: SWR_AUDIO_CGCR RESET + + reset-names: + items: + - const: swr_audio_cgcr + + '#sound-dai-cells': + const: 1 + + '#address-cells': + const: 2 + + '#size-cells': + const: 0 + + wakeup-source: true + + qcom,din-ports: + $ref: /schemas/types.yaml#/definitions/uint32 + description: count of data in ports + + qcom,dout-ports: + $ref: /schemas/types.yaml#/definitions/uint32 + description: count of data out ports + + qcom,ports-word-length: + $ref: /schemas/types.yaml#/definitions/uint8-array + description: Size of payload channel sample. + Value of 0xFF indicates that this option is not implemented + or applicable for the respective data port. + More info in MIPI Alliance SoundWire 1.0 Specifications. + minItems: 3 + maxItems: 5 + + qcom,ports-sinterval-low: + $ref: /schemas/types.yaml#/definitions/uint8-array + description: Sample interval low of each data port. + Out ports followed by In ports. Used for Sample Interval + calculation. + Value of 0xFF indicates that this option is not implemented + or applicable for the respective data port. + More info in MIPI Alliance SoundWire 1.0 Specifications. + minItems: 3 + maxItems: 8 + + qcom,ports-offset1: + $ref: /schemas/types.yaml#/definitions/uint8-array + description: Payload transport window offset1 of each + data port. Out ports followed by In ports. + Value of 0xFF indicates that this option is not implemented + or applicable for the respective data port. + More info in MIPI Alliance SoundWire 1.0 Specifications. + minItems: 3 + maxItems: 8 + + qcom,ports-offset2: + $ref: /schemas/types.yaml#/definitions/uint8-array + description: Payload transport window offset2 of each + data port. Out ports followed by In ports. + Value of 0xFF indicates that this option is not implemented + or applicable for the respective data port. + More info in MIPI Alliance SoundWire 1.0 Specifications. + minItems: 3 + maxItems: 8 + + qcom,ports-lane-control: + $ref: /schemas/types.yaml#/definitions/uint8-array + description: Identify which data lane the data port uses. + Out ports followed by In ports. + Value of 0xFF indicates that this option is not implemented + or applicable for the respective data port. + More info in MIPI Alliance SoundWire 1.0 Specifications. + minItems: 3 + maxItems: 5 + + qcom,ports-block-pack-mode: + $ref: /schemas/types.yaml#/definitions/uint8-array + description: Indicate the block packing mode. + 0 to indicate Blocks are per Channel + 1 to indicate Blocks are per Port. + Out ports followed by In ports. + Value of 0xFF indicates that this option is not implemented + or applicable for the respective data port. + More info in MIPI Alliance SoundWire 1.0 Specifications. + minItems: 3 + maxItems: 8 + + qcom,ports-hstart: + $ref: /schemas/types.yaml#/definitions/uint8-array + description: Identifying lowerst numbered coloum in + SoundWire Frame, i.e. left edge of the Transport sub-frame + for each port. Values between 0 and 15 are valid. + Out ports followed by In ports. + Value of 0xFF indicates that this option is not implemented + or applicable for the respective data port. + More info in MIPI Alliance SoundWire 1.0 Specifications. + minItems: 3 + maxItems: 5 + + qcom,ports-hstop: + $ref: /schemas/types.yaml#/definitions/uint8-array + description: Identifying highest numbered coloum in + SoundWire Frame, i.e. the right edge of the Transport + sub-frame for each port. Values between 0 and 15 are valid. + Out ports followed by In ports. + Value of 0xFF indicates that this option is not implemented + or applicable for the respective data port. + More info in MIPI Alliance SoundWire 1.0 Specifications. + minItems: 3 + maxItems: 5 + + qcom,ports-block-group-count: + $ref: /schemas/types.yaml#/definitions/uint8-array + description: In range 1 to 4 to indicate how many sample + intervals are combined into a payload. + Out ports followed by In ports. + Value of 0xFF indicates that this option is not implemented + or applicable for the respective data port. + More info in MIPI Alliance SoundWire 1.0 Specifications. + minItems: 3 + maxItems: 5 + + label: + maxItems: 1 + +patternProperties: + "^.*@[0-9a-f],[0-9a-f]$": + type: object + description: Child nodes for a standalone audio codec or speaker amplifier IC. + It has RX and TX Soundwire slave devices. + properties: + compatible: + pattern: "^sdw[0-9a-f]{1}[0-9a-f]{4}[0-9a-f]{4}[0-9a-f]{2}$" + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - '#sound-dai-cells' + - '#address-cells' + - '#size-cells' + - qcom,dout-ports + - qcom,din-ports + - qcom,ports-sinterval-low + - qcom,ports-offset1 + - qcom,ports-offset2 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h> + + soundwire@3210000 { + compatible = "qcom,soundwire-v1.6.0"; + reg = <0x03210000 0x2000>; + + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 130 IRQ_TYPE_LEVEL_HIGH>; + + interrupt-names = "core", "wakeup"; + + clocks = <&lpass_rx_macro>; + clock-names = "iface"; + + qcom,din-ports = <0>; + qcom,dout-ports = <5>; + + resets = <&lpass_audiocc LPASS_AUDIO_SWR_RX_CGCR>; + reset-names = "swr_audio_cgcr"; + + qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff>; + qcom,ports-sinterval-low = /bits/ 8 <0x03 0x3f 0x1f 0x03 0x03>; + qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x01>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00>; + qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0x00>; + + #sound-dai-cells = <1>; + #address-cells = <2>; + #size-cells = <0>; + + codec@0,4 { + compatible = "sdw20217010d00"; + reg = <0 4>; + qcom,rx-port-mapping = <1 2 3 4 5>; + }; + };