tas2770_reset is called during i2c probe. The reset calls the snd_soc_component_write which depends on the tas2770->component being available. The component pointer is not set until codec_probe so move the reset to the codec_probe after the pointer is set.

Fixes: 1a476abc723e6 ("tas2770: add tas2770 smart PA kernel driver") Signed-off-by: Dan Murphy dmurphy@ti.com --- sound/soc/codecs/tas2770.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/tas2770.c b/sound/soc/codecs/tas2770.c index c09851834395..03d7ad1885b8 100644 --- a/sound/soc/codecs/tas2770.c +++ b/sound/soc/codecs/tas2770.c @@ -575,6 +575,8 @@ static int tas2770_codec_probe(struct snd_soc_component *component)

tas2770->component = component;

+ tas2770_reset(tas2770); + return 0; }

@@ -771,8 +773,6 @@ static int tas2770_i2c_probe(struct i2c_client *client, tas2770->channel_size = 0; tas2770->slot_width = 0;

- tas2770_reset(tas2770); - result = tas2770_register_codec(tas2770); if (result) dev_err(tas2770->dev, "Register codec failed.\n");