* Automatically sets TDM mode for frame_width larger than 32 bits, if the user doesn't setup the TDM slots with set_tdm_slot(). * Reset SSCR0_EDSS and SSCR0_DSS on pxa_ssp_set_dai_fmt. * Makes SSCR0_MOD optional. * Clears SSCR1_RWOT case SSCR0_MOD is set.

Signed-off-by: Daniel Ribeiro drwyrm@gmail.com

--- sound/soc/pxa/pxa-ssp.c | 92 +++++++++++++++++++++++++++-------------------- 1 files changed, 53 insertions(+), 39 deletions(-)

diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c index 5b9ed64..d60492e 100644 --- a/sound/soc/pxa/pxa-ssp.c +++ b/sound/soc/pxa/pxa-ssp.c @@ -452,8 +452,8 @@ static int pxa_ssp_set_dai_fmt(struct snd_soc_dai *cpu_dai, }

/* reset port settings */ - sscr0 = ssp_read_reg(ssp, SSCR0) & - (SSCR0_ECS | SSCR0_NCS | SSCR0_MOD | SSCR0_ACS); + sscr0 = ssp_read_reg(ssp, SSCR0) & (SSCR0_ECS | SSCR0_NCS | SSCR0_MOD | + SSCR0_ACS | SSCR0_DSS | SSCR0_EDSS); sscr1 = SSCR1_RxTresh(8) | SSCR1_TxTresh(7); sspsp = 0;

@@ -496,7 +496,7 @@ static int pxa_ssp_set_dai_fmt(struct snd_soc_dai *cpu_dai, case SND_SOC_DAIFMT_DSP_A: sspsp |= SSPSP_FSRT; case SND_SOC_DAIFMT_DSP_B: - sscr0 |= SSCR0_MOD | SSCR0_PSP; + sscr0 |= SSCR0_PSP; sscr1 |= SSCR1_TRAIL | SSCR1_RWOT; break;

@@ -532,48 +532,70 @@ static int pxa_ssp_hw_params(struct snd_pcm_substream *substream, struct ssp_priv *priv = cpu_dai->private_data; struct ssp_device *ssp = priv->dev.ssp; int chn = params_channels(params); - u32 sscr0; - u32 sspsp; + u32 sscr0, sscr1, sspsp; int width = snd_pcm_format_physical_width(params_format(params)); - int ttsa = ssp_read_reg(ssp, SSTSA) & 0xf; + int slot_width, frame_width = 0; + + /* check if the user explicitly set a slot_width */ + sscr0 = ssp_read_reg(ssp, SSCR0); + + if (sscr0 & (SSCR0_EDSS | SSCR0_DSS)) + slot_width = (sscr0 & SSCR0_DSS) + + (sscr0 & SSCR0_EDSS ? 17 : 1); + else + frame_width = slot_width = width * chn;

/* generate correct DMA params */ if (cpu_dai->dma_data) kfree(cpu_dai->dma_data);

- /* Network mode with one active slot (ttsa == 1) can be used - * to force 16-bit frame width on the wire (for S16_LE), even - * with two channels. Use 16-bit DMA transfers for this case. - */ - cpu_dai->dma_data = ssp_get_dma_params(ssp, - ((chn == 2) && (ttsa != 1)) || (width == 32), + cpu_dai->dma_data = ssp_get_dma_params(ssp, slot_width > 16, substream->stream == SNDRV_PCM_STREAM_PLAYBACK);

/* we can only change the settings if the port is not in use */ - if (ssp_read_reg(ssp, SSCR0) & SSCR0_SSE) + if (sscr0 & SSCR0_SSE) return 0;

- /* clear selected SSP bits */ - sscr0 = ssp_read_reg(ssp, SSCR0) & ~(SSCR0_DSS | SSCR0_EDSS); - ssp_write_reg(ssp, SSCR0, sscr0); - - /* bit size */ - sscr0 = ssp_read_reg(ssp, SSCR0); - switch (params_format(params)) { - case SNDRV_PCM_FORMAT_S16_LE: #ifdef CONFIG_PXA3xx - if (cpu_is_pxa3xx()) - sscr0 |= SSCR0_FPCKE; + if (slot_width == 16 && cpu_is_pxa3xx()) + sscr0 |= SSCR0_FPCKE; #endif - sscr0 |= SSCR0_DataSize(16); - break; - case SNDRV_PCM_FORMAT_S24_LE: - sscr0 |= (SSCR0_EDSS | SSCR0_DataSize(8)); - break; - case SNDRV_PCM_FORMAT_S32_LE: - sscr0 |= (SSCR0_EDSS | SSCR0_DataSize(16)); - break; + + if (frame_width > 0) { + /* Not using network mode */ + if (frame_width > 16) + sscr0 |= SSCR0_EDSS | SSCR0_DataSize(frame_width - 16); + else + sscr0 |= SSCR0_DataSize(frame_width); + + if (frame_width > 32) { + /* + * Network mode is needed to support this frame width. + * We assume the wire is not networked and setup a + * fake network mode here. Use as many slots as needed + * each with 32 bits. + */ + int slots = frame_width / 32; + + sscr0 |= SSCR0_MOD; + sscr0 |= SSCR0_SlotsPerFrm(slots); + + /* + * Set active slots. Only set an active TX slot + * if we are going to use it. + */ + ssp_write_reg(ssp, SSRSA, slots - 1); + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + ssp_write_reg(ssp, SSTSA, slots - 1); + } } + + /* If SSCR0_MOD is set we can't use SSCR1_RWOT */ + if (sscr0 & SSCR0_MOD) { + sscr1 = ssp_read_reg(ssp, SSCR1); + ssp_write_reg(ssp, SSCR1, sscr1 & ~SSCR1_RWOT); + } + ssp_write_reg(ssp, SSCR0, sscr0);

switch (priv->dai_fmt & SND_SOC_DAIFMT_FORMAT_MASK) { @@ -620,14 +642,6 @@ static int pxa_ssp_hw_params(struct snd_pcm_substream *substream, break; }

- /* When we use a network mode, we always require TDM slots - * - complain loudly and fail if they've not been set up yet. - */ - if ((sscr0 & SSCR0_MOD) && !ttsa) { - dev_err(&ssp->pdev->dev, "No TDM timeslot configured\n"); - return -EINVAL; - } - dump_registers(ssp);

return 0;